Stereocomplex formation of isotactic poly(methyl methacrylate) with a wide variety of syndiotactic polymethacrylates

Syndiotactic (st–) polymers of methacrylates with primary and secondary ester groups, prepared by the syndiotactic-specific living polymerization with t-C₄H₉Li/R₃Al, were found to form stereocomplexes with isotactic (it–) poly(methyl methacrylate) (PMMA) by annealing in the solid state or by mixing in certain solvents such as acetone and toluene. Melting points of the complexes depend on the structure of the ester group and can be changed in a wide range of temperature. st–Polymers of tertiary esters did not form the complex. Effects of anneal conditions, molecular weight, and tacticity on the melting point of the complex were studied in some detail for the combination of st–poly(benzyl methacrylate) and it–PMMA. st–Random copolymers of MMA with several alkyl methacrylates also formed stereocomplexes with it–PMMA, whose melting point could be changed continuously by changing the composition in a certain range of temperature. st–Block copolymers of PMMA and poly(benzyl methacrylate) formed stereocomplexes with it–PMMA which showed two melting points, provided the block lengths are long enough for the two types of the com plexes to form independently. Stereoblock PMMA, it–PMMA–block–st–PMMA, and stereoblock copolymer, it–PMMA–block–st–poly(butyl methacrylate), were found to form stereocomplexes more easily than the corresponding mixtures. The stereoregular uniform PMMAs were used for elucidating the process of stereocomplex formation and its stoichiometry by means of gelpermeation chromatography (GPC). The preliminary results clearly indicated that the complexation occurs mainly in 1:1 stoichiometry in the beginning, while a small fraction of 1:2 (it–: st–) complex was also formed concomitantly. By similar GPC experiments using a series of uniform PMMAs, the minimum length of PMMA chains for the complex formation was found to be in the range of degrees of polymerization from 42 to 46.     

Preparation and properties of isotactic and syndiotactic poly(methyl methacrylate)s,uniform with respect to molecular weight

Highly isotactic (it-) and highly syndiotactic (st-) poly(methyl methacrylate)s (PMMAs) uniform with respect to molecular weight (stereoregular, uniform PMMAs) were isolated up to the 100mer from it- and st-PMMAs by supercritical fluid chromatography (SFC) and characterized by NMR and mass spectroscopies. Glass transition temperatures (Tg's) of the uniform it- and st-PMMAs were higher than those of the corresponding PMMAs with MWD and with similar molecular weight on average. The Tg values of the uniform it-and st-PMMAs series obeyed the relationship, Tg = Tg∞ - K/M, where M and Tg∞ denote molecular weight and Tg at infinite M, respectively. The reciprocal melting points (1/Tm) of uniform it-PMMA (degree of polymerization, DP = 28–44), obtained from methanol solutions by evaporating the solvent, increased linearly with increasing 1/DP. Extrapolation of the linear relation to 1/DP = 0 gave the Tm of it-PMMA with infinite DP; Tm∞ = 171.1°C. Thermal degradation behavior was studied by thermogravimetry and by SFC analysis of degradation products. In gel-permeation chromatography (GPC) measurements, the it-50mer eluted faster than the st-50mer. Calibration curves for it- and st-PMMAs could be obtained using series of the uniform PMMAs. The instrumental spreading factor determined using it-25mer, it-50mer, st-25mer and st-50mer for our GPC chromatograph was 0.070 ml when the volume of the sample solution was 0.003ml. GPC analysis of a mixture of the it- and st-50mers in tetrahydrofuran indicated formation of a stereocomplex in the solution, and was found quite useful to elucidate the minimum sequence length required for complex formation.     

Compatibilization of blends of polybutadiene and poly(methyl methacrylate) with poly(butadiene-block-methyl methacrylate)

Compatibilization of blends of polybutadiene and poly(methyl methacrylate) with butadiene-methyl methacrylate diblock copolymers has been investigated by transmission electron microscopy. When the diblock copolymers are added to the blends, the size of PB particles decreases and their size distribution gets narrower. In PB/PMMA7.6K blends with P(B-b-MMA)25.2K as a compatibilizer, most of micelles exist in the PMMA phase. However, using P(B-b-MMA)38K as a compatibilizer, the micellar aggregation exists in PB particles besides that existing in the PMMA phase. The core of a micelle in the PMMA phase is about 10 nm. In this article the influences of temperature and homo-PMMA molecular weight on compatibilization were also examined. At a high temperature PB particles in blends tend to agglomerate into bigger particles. When the molecular weight of PMMA is close to that of the corresponding block of the copolymer, the best compatibilization result would be achieved. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36 : 85–93, 1998     

Poly(ethylene-co-vinyl alcohol) and poly(methyl methacrylate) blends: Phase behavior and morphology

In this work blends of poly(ethylene-co-vinyl alcohol) (EVOH) with different ethylene contents (27, 32, 38 and 44 mol%) and poly(methyl methacrylate) (PMMA) were prepared by mechanical mixing in the melted state. The miscibility and melting behavior as a function of blend composition and the ethylene content in EVOH copolymers were investigated by means of differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA). The morphology of the cryofractured surfaces was examined by scanning electron microscopy (SEM). DSC and DMTA data show that EVOH/PMMA blends are immiscible, independent of EVOH and blend composition. The SEM analysis in agreement with DMTA analysis indicates that the morphology of phases depends on the blend composition, with phase inversion occurring as the concentration of one or other polymer component increases. However, the copolymer composition apparently does not affect the domain size distribution for blends containing 20 wt% of EVOH or 20 wt% of PMMA. A better phase adhesion is observed mainly for blends with 50 wt% of each polymer component.     

Radical polymerization of methyl methacrylate in the presence of isotactic poly(methyl methacrylate)

Methyl methacrylate (MMA) was polymerized by radical initiation at 25°C in DMF in the presence of preformed isotactic PMMA (iMA) with about 90% isotactic triads and different M?_v's, viz., iMA-1: 7.2 × 10⁵; iMA-2, 5.0 × 10⁵; iMA-3, 3.5 × 10⁵; iMA-4, 1.25 × 10⁵; and iMA-5, 1.15 × 10⁵. The MMA:iMA ratio was 6:1. The collected polymers were separated into two fractions by extraction with boiling acetone and characterized by 60 MHz NMR. It is found that the M?_v of the polymer formed ran parallel to the M?_v of iMA. In all cases syndiotactic PMMA (s-PMMA) was produced which associated with the isotactic substrate to form acetone-insoluble stereocomplexes. The syndiotactic polymers probably consist of long syndiotactic and heterotactic sequences. The syndiotacticity decreased with conversion and was generally highest in the presence of iMA-1. With iMA-1 even the formation of some additional i-PMMA (in the acetone-insolubles) was indicated, especially in the later stages of the polymerization. Characterization of the acetone-soluble fractions indicated that i,s-stereoblock polymers were also produced, of which the persistence ratios ρ increased with the M?_v of iMA. From these results it is concluded that this reaction differs from the conventional radical polymerization and can be considered a stereospecific replica polymerization, the driving force being the strong tendency of i- and s-PMMA to associate. The formation of i,s-stereoblock polymers and additional i-PMMA indicates that s-PMMA in its turn can also act as a polymer matrix.     

Synthesis of isotactic,syndiotactic, and heterotactic poly(tributyltin methacrylate) and poly(tributyltin methacrylate-co-styrene)

Pure isotactic and enriched syndiotactic poly(tributyltin methacrylate) were synthesized by the reaction of the respective poly(methacrylic acid) with tributyltin oxide. The heterotactic polymer was prepared in a similar manner and from free radical initiated (AIBN or BPO) polymerization of tributyltin methacrylate. In each case, polymer configuration was confirmed by ¹H-NMR of the hydrolyzed/esterfied product. The relatively large ¹¹⁹Sn-NMR linewidth of the isotactic tributyltin containing polymer suggests an intra-molecular exchange of the pendant tin groups. T_g, T_d, and M _v data are also reported. Poly(tributyltinmethacrylate-co-styrene) was prepared by free radical polymerization and reactivity ratios [r(styrene) = 0.51, r(TBTM) = 0.49] and Q-e values for TBTM (0.78, 0.38) were determined.     

Morphological studies of poly(vinylidene fluoride) and its blends with poly(methyl methacrylate)

Both pure poly(vinylidene fluoride) (PVF₂) and its blends with poly(methyl methacrylate) (PMMA) develop a variety of morphologies when they are crystallized above the 420–424 K range. Two populations of spherulites as well as axialitelike growths are observed. Addition of the PMMA lowers the temperature where these new morphologies develop, makes the spherulites more open, causes the banding periodicity to decrease, and increases the number of small, coarse spherulites. These structures melt in three regimes. The highest-melting-point crystals arise only from a solid-solid transformation of the lowest-melting-point ones. This solid-state transition sometimes causes mixed spherulites to be formed in the blends. Electron and wide-angle x-ray diffraction show the lowest-melting-point species to be α crystals, while the other two are γ crystals. The highest-melting-point species, labeled γ′, and the α crystals seem to be more ordered than the other γ crystals.     

Melting studies of poly(vinylidene fluoride) and its blends with poly(methyl methacrylate)

Blends of poly(vinylidene fluoride) (PVF₂) and poly(methyl methacrylate) exhibit complex melting behavior when crystallized at low undercoolings. Three crystals comprised of two different PVF₂ forms grow. Hoffman-Weeks plots of the observed melting points T_m of these crystals versus crystallization temperatures are constructed. The lowest-melting-point species, the α form, shows a change in slope which is attributed to fewer head-to-head PVF₂ units trapped in the crystal at higher temperatures. Defect energies in the crystal due to these units are calculated to be from 6.3 to 10.3 kJ/mol. Estimating lamellar thicknesses from the slopes of the two regions gives much more reasonable values when the high-temperature data are used. Removal of kinetic effects that lower the observed T_m by extrapolating the data to obtain T permits the thermodynamic interaction energy density B between the two polymers to be obtained. The low-temperature α-form data give B = ?8.83 × 10⁶ J/m³. The high-temperature α-form data and the T of the γ-form crystals both show B to vary from ?5.40 × 10⁶ to ?2.96 × 10⁷ J/m³ as the blend composition goes from 40.1 vol % to pure PVF₂.     

Novel blends from agave fibers and poly(methyl methacrylate)

Cellulose-rich fibers were isolated from Agave lechuguilla (AL) and Agave fourcroydes (AF) growing in the Mexican northeast. These fibers are a valuable feedstock for the preparation of blends with synthetic polymers like poly(methyl methacrylate), PMMA. Blends of different types of agave fibers (dewaxed, mercerized, and grafted) and PMMA were prepared and investigated by means of tension measurements and dynamic mechanical analysis. The fiber-containing blends are more stable than the plain PMMA. Surprisingly, the mechanical stability of the blends is practically independent of the pretreatment of the fibers. Methyl methacrylate (MMA) was grafted onto the biopolymer fibers initiated by the cerammonium nitrate redox initiator. Grafting yields of 26.5% were realized with fibers from AL while up to 75.8% MMA was grafted onto fibers from AF. The materials were characterized by means of FTIR spectroscopy and DSC.     

Ptitsyn-Eizner λ parameter for syndiotactic poly(methyl methacrylate) in good solvents

We have calculated the λ parameter from the Ptitsyn-Eizner equation for syndiotactic poly(methyl methacrylate) in several good solvents (chloroform, acetone, ethyl and butyl acetate). We have analyzed the contributions of long and short range interactions to the λ parameter as a function of solvent quality.     

Thermal oxidation of blends of poly(ethylene oxide) and poly(methyl methacrylate)

Thermal oxidation of poly(ethylene oxide) (PEO) and its blends with poly(methyl methacrylate) (PMMA) were studied using oxygen uptake measurements. The rates of oxidation and maximum oxygen uptake contents were reduced as the content of PMMA was increased in the blends. The results were indicative of a stabilizing effect by PMMA on the oxidation of PEO. The oxidation reaction at 140°C was stopped at various stages and PMMA was separated from PEO and its molecular weights were measured by gel permeation chromatography (GPC). The decrease in the number-average molecular weight of PMMA was larger as the content of PEO increased in the blends. The visual appearance of the films suggested that phase separation did not occur after thermal oxidation. The activation energy for the rates of oxidation in the blends was slightly increased compared to pure PEO. © 1992 John Wiley & Sons, Inc.     

Thermogravimetric studies on poly(methyl methacrylate), poly(tetrahydrofuran) and their blends

TG studies are given for PMMA prepared by radical polymerization, PTHF prepared by cationic polymerization, and their blends. A procedure is proposed for determining the activation energy, frequency factor, and the order of events corresponding to the respective stages of the multistage TG curves. The order of the initial event of PMMA is not the 1st. It is shown for this discussion that the relationship between mass loss and time of the 2nd order reaction is similar to that of the depolymerization including the vaporization process at the earlier times. Some of TG curves of PTHF are not dependent on the heating rate. This independence depends on the size of sample. The order of event of PTHF, which is obtained from TG curves dependent on the heating rate, is the 0th. The event order equal to the 0th reflects major contribution of vaporization in the event. The TG behaviors shown by the procedure mentioned above for the PMMA/PTHF blends with the smaller PMMA or PTHF contents cancel those of PMMA or PTHF. This revised version was published online in July 2006 with corrections to the Cover Date.     

Surface structures and properties of polystyrene/poly(methyl methacrylate) blends and copolymers

Sum frequency generation (SFG) vibrational spectroscopy has been applied to study the molecular surface structures of polystyrene (PS)/poly(methyl methacrylate) (PMMA) blends and the copolymer between PS and PMMA (PS-co-PMMA) in air, supplemented by atomic force microscopy (AFM) and contact angle goniometer. Both the blend and the copolymer have equal weight amounts of the two components. SFG results show that both components, PS and PMMA, can segregate to the surface of the blend and the copolymer before annealing, although PMMA has a slightly higher surface tension. Upon annealing both SFG results and contact angle measurements indicate that the PS segregates to the surface of the PS/PMMA blend more but no change occurs on the PS-co-PMMA surface. AFM images show that the copolymer surface is flat but the 1:1 PS/PMMA blend has a rougher surface with island like domains present. The annealing effect on the blend surface morphology has also been investigated. We collected amide SFG signals from interfacial fibrinogen molecules at the copolymer or blend/protein solution interfaces as a function of time. Different time-dependent SFG signal changes have been observed, showing that different surfaces of the blend and the copolymer mediate fibrinogen adsorption behavior differently.     

Epitaxial crystallization of isotactic poly(methyl methacrylate) on highly oriented polyethylene

The annealing behavior of amorphous i-PMMA thin films on highly oriented HDPE substrates was studied by transmission infrared spectroscopy and electron diffraction. The i-PMMA thin film on highly oriented HDPE exhibits a much faster crystallization rate than usual, providing not only a good method for the preparation of crystalline i-PMMA thin and ultrathin film, but also the convenience to observe the crystallization process by infrared spectroscopy in situ. The overall crystallization kinetics of the i-PMMA thin film on the highly oriented HDPE layer was also explored in this work, and an Avrami exponent of about 2 was obtained. The accelerated crystallization behavior indicates a special interaction between HDPE and i-PMMA, which favors the nucleation and crystallization of i-PMMA. This special interaction leads also to an oriented alignment of i-PMMA on the HDPE substrate with both polymer chains parallel, i.e., the occurrence of heteroepitaxy, which could be verified by the polarized infrared spectra and electron diffraction pattern. Electron diffraction analysis further demonstrated that the contact planes of this epitaxial system are (100) lattice planes of both polymers. This can be explained in terms of a two-dimensional lattice matching.     

Thermal and photochemical stability of poly(methyl methacrylate) and its blends with poly(vinyl acetate)

An investigation of the thermal stability of poly(methyl methacrylate) (PMMA) blends with poly(vinyl acetate) (PVAc) revealed that PVAc acts as a stabilizer as concerns thermal and photochemical degradation when the processes take place in air. The temperatures of decomposition of these blends are higher than that of pure PMMA. The efficiency of photodegradation and photooxidation in the blends is lower than that of pure PMMA.     

Determination of the heat of fusion of isotactic poly(methyl methacrylate)

The heat of fusion (ΔH_u) of isotactic poly(methyl methacrylate) (PMMA) was determined from the combined linear regression analysis of x-ray diffraction data and differential scanning calorimetry. By means of two sample preparation techniques to reduce crystallinity, a thermal pretreatment in which a partial melt and quench cycle was utilized, and a mechanical mixture in which a semicrystalline and amorphous material were blended, a value for ΔH_u = 1200 ± 80 cal/mole (100 g) was found. The present result represents the first measurement of ΔH_u for an acrylic polymer and yields G(-units) = 12 from cryoscopic measurements for the chemical changes caused by high energy irradiation.     

Compatibility in poly(ethylene oxide)–poly(methyl methacrylate) blends

The compatibility of poly(ethylene oxide)-poly(methyl methacrylate) (PEO-PMMA) blends were examined covering the complete composition range. Up to 20% of PEO content films were transparent and glass transition temperatures were determined by DSC and by refractive index vs. temperature measurements. Only one T_g was obtained for these samples and the relationship between T_g and composition has been evaluated. At higher PEO content crystallization took place and the films were opaque. Melting temperatuures of PEO in blends were determined by DSC. Melting point depression was observed for increasing proportion of PMMA and the binary interaction parameter has been calculated.     

Phase separation studies on poly(vinylidene fluoride) and poly(methyl methacrylate) quenched blends

A combined study by SAXS and DSC on quenched blends of PVDF and PMMA is presented. Attention is focused on the first stage of the phase separation process during annealing that is shown to be mainly determined by the diffusion of the PVDF molecules from the amorphous blend phase towards the crystals growth front. The experimental monomer diffusion constants at T > T_g are compared with those expected theoretically using the approximation of the fast model process and the WLF equation for the relaxation frequency of the monomer. The nature and composition of the crystal interphase are discussed in terms of the SAXS invariant for the whole system and the calorimetric data derived from the T_g transitions observed.     

Thermal degradation studies in poly(vinyl chloride)/poly(methyl methacrylate) blends

The miscibility, morphology, and thermal properties of poly(vinyl chloride) (PVC) blends with different concentrations of poly(methyl methacylate) (PMMA) have been studied. The interaction between the phases was studied by FTIR and by measuring the glass transition temperature (T_g) of the blends using differential scanning calorimetry. Distribution of the phases at different compositions was studied through scanning electron microscopy. The FTIR and SEM results show little interaction and gross phase separation. The thermogravimetric studies on these blends were carried out under inert atmosphere from ambient to 800 °C at different heating rates varying from 2.5 to 20 °C/min. The thermal decomposition temperatures of the first and second stage of degradation in PVC in the presence of PMMA were higher than the pure. The stabilization effect on PVC was found most significant with 10 wt% PMMA content in the PVC matrix. These results agree with the isothermal degradation studies using dehydrochlorination and UV-vis spectroscopic results carried out on these blends. Using multiple heating rate kinetics the activation energies of the degradation process in PVC and its blends have been reported.