Thermal Expansion and Superconductivity in Alkali Metal- and Silver-doped Bi?Sr?Ca?Cu?O System

Samples with the nominal composition Bi₂Sr₂CaCu₂O_y with na doped at the Ca site and K doped at the Sr site are prepared by solid state reaction method. From the X-ray diffraction data it is found that all the the samples have exhibited a single phase 2212. The D.C. electrical resistivity data show that for Na-doped samples the T_c (zero) varies from 80 K to 85 K and for K-doped samples it is from 79 K to 82 K. The loss of oxygen from these samples around 400°C was confirmed by high temperature dilatometry. The variation of the thermal expansion coefficient (“α”) with temperature for different alkali dopings are discussed. Also the samples with the nominal composition Bi₄Sr₃Ca₃Cu_4−xAg_xO_y (with x = 0, 0.1, 0.2, 0.3) were studied.     

Resistance and inductance studies of Bi2−xPbxCa2Sr2Cu3Oy superconducting compounds

Bi_2−xPb_xCa₂Sr₂Cu₃O_y compounds with (x = 0, 0.1, 0.2, 0.25, 0.3 and 0.4) were prepared by solid state reaction. The resistance and inductance results showed that transition temperature increases with increase in lead concentration. The highest value of T_c(0) observed is 109 K for Bi_1.70Pb_0.30Ca₂Sr₂ · Cu₃O_y. The change of inductance per unit volume at liquid nitrogen temperature as a function of composition showed maximum change in x = 0.30 Pb-doped sample. The results showed that the inductance change is maximum in samples which also showed highest T_c.     

Growth Kinetics of High-Tc and Low-Tc Phases in Bi2-xPbxCa2Sr2Cu3Oy Superconducting Compounds

Superconducting samples of the composition Bi_2-xPb_xCa₂Sr₂Cu₃O_y (x = 0.0, 0.1, 0.2, 0.3, 0.4, and 0.5) are prepared by co-decomposition of metal nitrates. DTA, TGA, density, and porosity studies have been performed on these samples. Characterisation techniques like XRD, SEM, EDXA, d.c. resistance, and a.c. magnetic susceptibility have been employed to study the growth of High-T_c (HTP) and Low-T_c (LTP) phases upon lead substitution for bismuth. Results have revealed the growth of HTP with increase in Pb conc. up to x = 0.3. Further increase in Pb appears to results in the deterioration of HTP resulting in the formation of LTP and Ca₂PbO₄ impurity phase. Transport critical current density (J_c) measurements performed on the samples indicate that Pb doping followed by densification remarkably improves the current carrying capacity of the materials.     

Effect of Lithium Doping in the Bi-2212 Superconducting System

Samples with the nominal composition Bi₂Sr₂Ca_1–xLi_xCu₂O_y (x = 0.2,0.4, and 0.6) and Bi₂Sr₂CaCu_2−x L1_xO_z (x = 0.4, 0.6, and 1.0) were prepared by the solid state reaction method. The role of L1 at both Ca and Cu sites in the Bi-2212 composition were studied. From the X-ray diffraction data it was found that the L1-doped at the Ca site increases the c-axis and that doped at the Cu site decreases the c-axis. From the D.C. four-probe resistivity data it was found that Li-doped at the Ca site reduces the T_c and the L1-doped at the Cu site gives T_c(0) above the liquid nitrogen temperature. It was observed that the L1 doping reduces the melting point of Bi-2212 composition. The presence of Lithium was confirmed by inductive the coupled plasma method.     

Extention of the “three partial rates” model to layer growth and composition of the ternary Si1–(x+y)GexBy system

The previously published “three-partial rates” model of Si_1–xGe_x layer growth (Kühne 1992) has been extended for describing Si_1–(x+y)Ge_xB_y ternary systems by taking additionally into account a partial rate of boron and a partial rate of boron-originated silicon deposition. Silicon deposition from a silane-germane-diborane-helium gas mixture at T = 500°C and P_total = 0.2 Torr is clearly enhanced by the presence of germane though to a low degree only, but not by diborane. Germanium partial rate as well as boron partial rate depends linearly on the partial pressure of the respective source gas. For illustration the data published by Murase have been used.     

Magneto‐transport properties of polycrystalline YBa2(Cu1‐xMx)3O7‐δ (M = B and Mn)

The magnetic and transport properties of polycrystalline YBa₂ (Cu_1‐xM_x)₃ O_7‐δ (M = B and Mn) superconductor was investigated. Samples of YBa₂(Cu_1‐xB_x)₃O_7‐δ doped with several concentrations of boron B(x = 0.05 and 0.1) were investigated using magnetization measurements. A YBa₂(Cu_1‐xMn_x)₃O_7‐δ sample doped with Mn with concentration of x = 0.02 was investigated using current‐voltage (I‐V) measurements. Our results on the YBa₂(Cu_1‐xB_x)₃O_7‐δ samples reveal a considerable increase in the hysterisis width of the magnetization, M versus the applied magnetic field H with increasing boron concentration. The lower critical field was also found to be enhanced by boron doping. The critical current density, J_c was found to be significantly enhanced in the Mn‐doped sample. The enhancement of J_c was found to be more significant at the lower temperatures for all applied magnetic fields used (0 Oe, 300 Oe, and 500 Oe). Thus, chemical doping is suggested to enhance the vortex pinning forces in the YBCO samples. From the resistivity (R‐T) measurements, chemical doping of the samples was found to have no significant effect on the critical temperature, T_c. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The Phase Diagram of the Pb–Mo–S System at 1250 K and Some Properties of the Superconducting PbMo6S8

Pb_xMo₆S_y arises as the sole ternary compound in the System Pb–Mo–S. At 1250 K it is surrounded by 4 phase regions with 3 solid phases. It has a homogeneity range of between 0.9 ≤ x < 1.1 and 7.6 ≤ y > ≤ 7.9. T_c changes within the homogeneity range. Chemical transport is possible within a limited section of the phase diagram in the presence of lead halides.     

Thermodynamic analysis and technology of preparation of high-Tc superconducting system YBa2Cu3O7−x

By modeling the equilibrium state of the phase formation reaction of High-T_c superconducting phase 1:2:3 (YBa₂Cu₃O_7−x) and using the results of P-T−x correlation investigation of some authors, the variation of Gibbs free energy (ΔGm) versus temperature has been calculated. On the basis of the variation of ΔGm, the technology procedure of preparation of phase 1:2:3 with desired x has been established to meet requirement of basic investigation and application of High-T_c superconductors YBa₂Cu₃O_7−x.     

Concentration Magnetic Phase Transitions in the (La1−xCaxMnO3 System

Comprehensive investigations into crystal structures, electrical and magnetic properties of the (La_1−xCa_x)MnO₃ (x = 0 ÷ 0.6) solid solutions are performed. Two concentration magnetic phase transitions are found: antiferromagnetic-ferromagnetic with x = 0.14 and ferromagnetic (T_c = 150 K) - ferromagnetic (T_c = 260 K) at f = 0.2. It is shown that the first of them is due to the crystal structure O′ O orthorhombic transition, the second - to the increase of ferromagnetic interaction at the expense of additional interaction through conduction electrons. A diagram of the magnetic states for (La_1−xCa_x)MnO₃ at x = 0 / 0.6 is given.     

InGaAsP quaternary layers on InP (100) substrate analysed by ion backscattering and channeling

In_1−xGa_xAs_yP_1−y layers LPE grown on InP(001) substrates are analysed by the Rutherford backscattering and channeling techniques. In addition to the layer thicknesses the compositions are determined from the random spectra and compared with the PL and XRD results. The high dechanneling rate of the He⁺ ions for [100] incidence is attributed to the displaced atoms in the distorted crystal lattice of these otherwise high-quality epitaxial layers. We find a characteristic value of Δ_χdist(0.1) = 2.3 ± 0.3% which must be taken into account for estimations of crystalline quality.     

Formation of bulk Pt–Pd–Ni–P glassy alloys

The thermal behavior of (Pt_0.4Pd_0.3Ni_0.3)_100−xP_x (x = 16–25 at.%) glassy alloys has been investigated. It is found that the crystallization behavior of the (Pt_0.4Pd_0.3Ni_0.3)_100−xP_x glassy alloys changes from a single-stage exothermic reaction to a two-stage exothermic reaction depending on phosphorous content. When the phosphorous content is 23 at.%, the glassy alloy exhibits the largest supercooled liquid region (ΔT_x) and a sharp single exothermic peak. Fixing the phosphorous content at 23 at.%, the Pt_77−x−yPd_xNi_yP₂₃ (x = 7.7–61.6 at.%, y = 7.7–61.6 at.%) glassy alloys have a wide composition range in which the glassy alloys exhibit a large supercooled liquid region (ΔT_x beyond 60 K). In this range, the Pt_30.8Pd_23.1Ni_23.1P₂₃ glass has the largest ΔT_x (77 K) and a high reduced glass transition temperature (T_rg) of 0.60. This alloy can be cast into fully glassy rods with a diameter of 3 mm. Under uni-axial compression, bulk Pt_30.8Pd_23.1Ni_23.1P₂₃ glassy alloy has an elastic strain of ∼2%, an ultimate strain (to fracture) of ∼6.4%, a Young’s modulus of ∼106 GPa and a failure strength of ∼1390 MPa.     

Ni1‐x Crx alloy for self controlled magnetic hyperthermia

It is known now that an increase in tumor temperature decreases the tumor resistance to chemo‐ and radiation therapies. Hyperthermia treatment of the tumor cells where damage to the healthy cells can be avoided is viable by using magnetic nanoparticles with controlled Curie temperatures. Nickel‐Chromium (Ni_1‐x Cr_x) particles with varying compositions have been investigated as thermoseeds for use in localized self controlled hyperthermia treatment of cancer. A series of Ni_1‐x Cr_x alloys, have been prepared to find the specific composition which has Curie temperature around 316‐317 K. The samples were cast by arc melting technique, and were annealed at 850 ^oC for 5 hours in sealed quartz tubes. Magnetic properties of the samples were investigated, including Curie temperature, saturation magnetization and hysterisis using Superconducting Quantum Interference Device (SQUID) and Vibrating Sample Magnetometer (VSM). The Curie temperatures of the alloys were found to decrease almost linearly from 401 K to 289 K as the Cr concentration was increased from x = 4.54 wt% to x = 5.90 wt%. The results showed that Ni_1‐x Cr_x alloys might be good candidates for self regulating magnetic hyperthermia applications. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Vickers indentation hardness of Hg1−xCdxTe

The Vickers indentation hardness of Hg_1−xCd_xTe has been measured as a function of composition x using monocrystalline samples of Bridgman and THM crystals and polycrystalline starting material at room temperature. The microhardness varied between 220 MPa (x=0) and 440 MPa (x=1), showing a maximum of 850 MPa at x ∼ 0.75, and was different between monocrystalline and polycrystalline samples. The “hardening rate” dH/dx is strongly dependent on the composition range and is discussed in context with solid solution hardening due to elastic interactions of solute atoms with gliding dislocations and ordering effects.     

Magnetic Susceptibility in 2D Superconductor NaxHfNCl System

Abstract

Superconducting critical temperature, T_c and the shielding volume fraction, SVF, of layered nitride superconductor Na_xHfNCl have been studied as a function of x, i.e. Na concentration. Although T_c decreases gradually with increasing x from 20.0 K at x=0.11 to 16.5 K at x=0.85, SVF has a sharp peak around x=1/6, where strong coupling between local ordering of Na atoms and Fermi surface instability can be expected. Structural disorder in the samples above x=0.5, observed by powder neutron diffraction, does not affect the superconductivity appreciably. Electronic specific heat coefficient, γ, is estimated to be about 7.7 mJ/mol/K² by its difference of magnetic susceptibility between HfNCl and Na_0.5HfNCl. The γ value is relatively small compared with the high T_c value, revealing double honeycomb lattice system as new potential higher T_c superconductor series by intercalation.     

Composition,morphology, and properties of sodium-bismuth tungstate crystals

A correlation has been revealed between the formation conditions, composition, morphology, and physicochemical properties of NaBi_{1 − x} (W_{1 + y} O₄)₂ crystals (0 ≤ x ≤ 0.16, 0 ≤ y ≤ 0.11). The effect of melt deviation from stoichiometry on the decomposition rate of grown crystals under electron beam irradiation is shown by transmission electron microscopy. A nonuniform dopant distribution over the crystal boule cross-section is found by microprobe analysis. The Raman spectra of the samples depend on their crystallographic orientation.

     

Structural phase transitions in Cu2–xFeyS crystals

Crystals with Cu_2−xFe_yS compositions (x = 0.30, 0.25, 0.20, 0.15; y = 0.05) have been synthetized and obtained by the method of slow cooling. X-ray diffractometric studies have shown that at room temperature the above crystals consist of an orthorhombic phase (anilite), a monoclinic phase (djurlite), and their metastable high-temperature facecentered cubic phases (FCC)₁ and (FCC)₂, respectively. A crystallographic relation has been found between the lattices of the orthorhombic, monoclinic and (FCC)₁ phase. It is shown that all these phases transform in the final analysis to a single high-temperature fcc phase. All the transitions are reversible, i.e. in the course of inverse cooling to room temperature, the diffraction patterns are restored completely in reverse order.     

Reduction of bulk and interface defects by network self-organizations in gate dielectrics for silicon thin film and field effect transistors (TFTs and FETs,respectively)

Studies of binary chalcogenide alloys have established that the onset of network rigidity is generally delayed by a network self-organization resulting in an intermediate phase with significant deviations from mean-field chemical bonding. In Ge_xSe_1−x, the onset of local chemical bonding rigidity occurs for a mean-field coordination, r_c = 2.4 at x = 0.2, but percolation of stress resulting in network rigidity is delayed until r_c = 2.52. This paper demonstrates that low levels of electrically active defects in gate dielectrics for (i) thin film transistors (TFTs) in liquid crystal displays (LCDs), and (ii) aggressively-scaled metal- oxide-semiconductor field effect transistors (MOSFETs) are derived from similar network self-organizations that occur for a narrow range of dielectric compositions. The dielectrics of this article are non-crystalline (nc-) Si_xN_yH_z alloys in which a chemical self-organization occurs during deposition at 300 °C, and nc-(SiO₂)_x(Si₃N₄)_y(ZrO₂)_z alloys in which it occurs during post-deposition annealing at ∼900 °C. For each of these alloys, the values of x, y and z, are approximately 0.3, 0.4 and 0.3.     

Growth,structure, and superconducting properties of Bi2Sr2Ca2Cu3O10 and (Bi,Pb)2Sr2Ca2Cu3O10‐y crystals

Large and high‐quality single crystals of both Pb‐free and Pb‐doped high temperature superconducting compounds (Bi_1‐xPb_x)₂Sr₂Ca₂Cu₃O_10‐y (x = 0 and 0.3) were grown by means of a newly developed “Vapour‐Assisted Travelling Floating Zone” technique (VA‐TSFZ). This modified zone‐melting technique was realised in an image furnace and allowed for the first time to grow Pb‐doped crystals by compensating for the Pb losses occurring at high temperature. Crystals up to 3×2×0.1 mm³ were successfully grown. Post‐annealing under high pressure of O₂ (up to 10 MPa at T = 500°C) was undertaken to enhance T_c and improve the homogeneity of the crystals. Structural characterisation was performed by single‐crystal X‐ray diffraction (XRD) and the structure of the 3‐layer Bi‐based superconducting compound was refined for the first time. Structure refinement showed an incommensurate superlattice in the Pb‐free crystals. The space group is orthorhombic, A2aa, with cell parameters a = 27.105(4) Å, b = 5.4133(6) Å and c = 37.009(7) Å. Superconducting studies were carried out by A.C. and D.C. magnetic measurements. Very sharp superconducting transitions were obtained in both kinds of crystals (ΔT_c ≤ 1 K). In optimally doped Pb‐free crystals, critical temperatures up to 111 K were measured. Magnetic critical current densities of 2�10⁵ A/cm² were measured at T = 30 K and μ₀H = 0 T. A weak second peak in the magnetisation loops was observed in the temperature range 40‐50 K above which the vortex lattice becomes entangled. We have measured a portion of the irreversibility line (0.1‐5 Tesla) and fitted the expression for the melting of a vortex glass in a 2D fluctuation regime to the experimental data. Measurements of the lower critical field allowed to obtain the dependence of the penetration depth on temperature: the linear dependence of λ(T) for T < 30 K is consistent with d‐wave superconductivity in Bi‐2223. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effective electro‐optic coefficient of (1–x)Pb(Zn1/3Nb2/3)O3–xPbTiO3 single crystals

Refractive indices and effective electro‐optic coefficient γ_c of (1–x)Pb(Zn_1/3Nb_2/3)O₃–xPbTiO₃ (PZN‐xPT, x = 0.05, 0.09 and 0.12) single crystals were measured at 532 nm wavelength. Orientation and temperature dependences of the electro‐optic coefficient were investigated. Large electro‐optic coefficient (γ_c = 470 pm/V) was observed in [001]‐poled PZN‐0.09PT crystal. More importantly, γ_c of tetragonal PZN‐0.12PT is almost unchanged in a temperature range −20 ∼ 80 °C. The γ_c of PZN‐xPT single crystals are much higher than that of widely used electro‐optic crystal LiNbO₃ (γ_c = 20 pm/V). These results show that PZN‐xPT single crystals are very promising materials for electro‐optic modulators in optical communications.     

Effect of the magnetism of manganese on the resistivity of liquid manganese–zinc alloys

The electrical resistivity of liquid Mn_xZn_1−x alloys has been measured as a function of temperature between the liquidus and 850 °C for a manganese concentration x from 0 to 0.3. The electrical resistivity results has been interpreted within the extended Faber–Ziman formalism taking into account energy dependent phase shifts. Spin-dependent scattering of the conduction electrons has been considered and shows a better agreement with the experimental values than the classical spin-independent approach.