Synthesis and properties of 4,4′-biphenyldicarboxylic acid and 2,6-naphthalenedicarboxylic acid

This article describes the synthesis and the properties of polyesters and copolyesters prepared from ethylene glycol, terephthalic acid, 4,4′ biphenyldicarboxylic acid (BDA), and 2,6-naphthlenedicarboxylic acid (NDA). The effect of incorporating varying levels of BDA and NDA on polyethylene terephthalate (PET) is described. Depending on the concentration, incorporation of BDA into PET leads to an improvement in glass transition temperature (T_g), strength, modulus, and barrier properties. Copolymers of PET containing up to about 50% BDA derived units are clear and have T_g's ranging from 85 to 105°C, making them suitable for applications where a high T_g along with clarity is important. Copolymers with higher BDA concentration are highly crystalline, with high rates of crystallization from the melt. Copolymerization of NDA with oligoethyleneterephthalate leads to copolymers that are generally amorphous. Crystallinity can be developed in copolymers with low concentration of NDA by thermal annealing. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3139–3146, 1999     

Thermotropic liquid crystal polyesters derived from 4,4′-biphenyldicarboxylic acid and oxyalkylene spacers

Several polyesters derived from bibenzoic acid and oxyalkylene glycols have been prepared and the ability of formation of mesophases was studied. The phase behaviour was investigated by means of differential scanning calorimetry, wide-angle X-ray diffraction and real-time variable-temperature small-angle X-ray diffraction. A common feature of all the studied polyesters, with ether groups in the spacer, is the inhibited ability for developing three-dimensional structures, in contrast to the polymers with all-methylene spacers. Moreover, the latter polymers show a monotropic mesophase behaviour but the former exhibit an enantiotropic transformation. Smectic structures of different types have been detected: The polyester derived from 3,3'-oxybis(1-propanol) produces a smectic S_A structure, while the polyester from triethylene glycol leads to a smectic S_C mesophase. The influence of the spacers on the dynamic mechanical relaxations of these polybibenzoates has been studied and discussed.     

One-step synthesis of 2,6-naphthalenedicarboxylic acid from naphthalene using cyclodextrin as catalyst

The one-step synthesis of 2,6-naphthalenedicarboxylic acid from naphthalene with carbon tetrachloride, copper powder and aqueous alkali has been achieved under mild conditions by the use of β-cyclodextrin as catalyst, producing 2,6-naphthalenedicarboxylic acid in 65 mol-% yield with 79% selectivity.     

The synthesis of some 4,4′-disubstituted-2,2′-biquinolines

2,2′-Biquinoline dioxide and 4,4′-dichloro-2,2′-biquinoline have been used for the preparation of the following 4,4′-disubstituted-2,2′-biquinolines: dimethoxy, diethoxy, dihydroxy, dipiperidino, dipyrrolidino, dibromo, diphenoxy, dithiophenoxy, di(p-chloro-phenoxy), di(p-bromophenoxy), di(p-fluorophenoxy), di(β-naphthoxy) and the dinitro dioxide. Molar extinction coefficients have been determined for several of the copper (I) complexes of these compounds.     

Selective synthesis of 4-hydroxybenzoic acid using immobilized cyclodextrin

-cyclodextrin immobilized with epichlorohydrin was used for the selective syntheses of 4-hydroxybenzoic acids from phenols and carbon tetrachloride in aqueous sodium hydroxide solutions. The selectivities were 100 %, and the yields were larger than 80 mole%. The immobilized catalysts were easily separated from the reaction mixture, and were repeatedly used without measurable decrease in the catalytic activity.     

Effect of methyl groups on the thermal properties of polyesters from methyl substituted 1,4-butanediols and 4,4′-biphenyldicarboxylic acid

Results are reported on the effect of lateral methyl groups on the thermal properties of a series of polyesters prepared from diethyl 4,4′-biphenyldicarboxylate and various methyl substituted 1,4-butanediols. The diols were 1,4-butanediol; 2-methyl-1,4-butanediol; 2,2-dimethyl-1,4-butanediol; 2,3-dimethyl-1,4-butanediol; 2,2,3-trimethyl-1,4-butanediol; and 2,2,3,3-tetramethyl-1,4-butanediol. Apart from the tetramethyl derivatve, the transition temperatures of the methyl substituted polyesters were lower with respect of the unsubstituted polyester. On the basis of polarized photomicrographs, a smectic A mesophase was found for the unsubstituted polyester, whereas a nematic mesophase was observed for the 2-methyl substituted polyster. The 2,2-dimethyl, 2,3-dimethyl, and the 2,2,3-trimethyl substituted polyesters showed no liquid crystalline behavior. The 2,2,3,3-tetramethyl derivative displayed a birefringent melt phase although the DSC measurements were not unambiguous. A copolyester based on diethyl 4,4′-biphenyldicarboxylate, 1,4-butanediol, and 2,2,3,3-tetramethyl-1,4-butanediol showed a broad nematic mesophase. Further evidence for the nematic mesophase of this copolyester and the 2-methyl substituted polyester was provided by dynamic rheological experiments. Based on thermogravimetric analysis, it was concluded that the thermal stability was affected only when four methyl side groups were present in the spacer. © 1995 John Wiley & Sons, Inc.     

Thermotropic liquid‐crystalline polyesters of 4,4′‐biphenol and phenyl‐substituted 4,4′‐biphenols with 4,4′‐oxybisbenzoic acid

A series of thermotropic polyesters, derived from 4,4′‐biphenol (BP), 3‐phenyl‐4,4′‐biphenol (MPBP), and 3,3′‐bis(phenyl)‐4,4′‐biphenol (DPBP), 4,4′‐oxybisbenzoic acid (4,4′‐OBBA), and other aromatic dicarboxylic acids as comonomers, were prepared by melt polycondensation and were characterized for their thermotropic liquid‐crystalline (LC) properties with a variety of experimental techniques. The homopolymer of BP with 4,4′‐OBBA and its copolymers with either 50 mol % terephthalic acid or 2,6‐naphthalenedicarboxylic acid had relatively high values of the crystal‐to‐nematic transition (448–460 °C), above which each of them formed a nematic LC phase. In contrast, the homopolymers of MPBP and DPBP had low fusion temperatures and low isotropization temperatures and formed nematic melts above the fusion temperatures. Each of these two polymers also exhibited two glass‐transition temperatures, which were associated with vitrified noncrystalline (amorphous) regions and vitrified LC domains, as obtained directly from melt polycondensation. As expected, they had higher glass‐transition temperatures (176–211 °C) than other LC polyesters and had excellent thermal stability (516–567 °C). The fluorescence properties of the homopolymer of DPBP with 4,4′‐OBBA, which was soluble in common organic solvents such as chloroform and tetrahydrofuran, were also included in this study. For example, it had an absorption spectrum (λ_max = 259 and 292 nm), an excitation spectrum (λ_ex = 258 and 292 nm with monitoring at 350 nm), and an emission spectrum (λ_em = 378 nm with excitation at 330 nm) in chloroform. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 141–155, 2002     

Mass spectral fragmentation pattern of 4,4′-bipyridines. Part II. 4,4′-oxybispyridine and 4,4′-thiobispyridine

The mass spectra of 4,4′-oxybispyridine and 4,4′-thiobispyridine are reported. In the former the base peak is due to the molecular ion and the fragmentation routes involve loss of H, CO, HCN, C₂H₂N and C_sHO from the molecular ion as well as rupture of the central bonds. In the latter the base peak is also due to the molecular ion and the fragmentation routes involve loss of H, CS, S, HCN and C₂HS as well as central bond rupture.     

Mass spectra of some tetrasubstituted 4,4′-biisoxazoles and 4,4′-methylendiisoxazoles

The behaviour of some tetrasubstituted 4,4′-biisoxazoles and 4,4′-methylendiisoxazoles under electron impact has been investigated by means of high and low resolution mass spectrometry. The determination of metastable transitions and accurate masses of important fragment ions has led to the construction of fragmentation schemes. Specific skeletal rearrangement processes are discussed and it is proposed that they proceed through azirine and oxazole intermediates.     

Fully aromatic thermotropic liquid crystalline polyesters of 3-phenyl-4,4′-biphenol with 4,4′-benzophenone dicarboxylic acid

A series of fully aromatic, thermotropic polyesters, derived from 3-phenyl-4,4′-biphenol (MPBP), nonlinear 4,4′-benzophenone dicarboxylic acid (4,4′-BDA), and various other comonomers was prepared by the melt polycondensation method and characterized for their thermotropic liquid crystalline behavior by a variety of experimental techniques. The homopolymer of MPBP with 4,4′-BDA had a fusion temperature (T_f) at 240°C, exhibited a nematic liquid crystalline phase, and had a narrow liquid crystalline range of 60°C. All of the copolyesters of MPBP with 4,4′-BDA and either 30 mol % 4-hydroxybenzoic acid (HBA), 6-hydroxy-2-naphthoic acid (HNA) or 50 mol % terephthalic acid (TA), 2,6-naphthale-nedicarboxylic acid (2,6-NDA) and low T_f values in the range of 210–230°C, exhibited a nematic phase, and had accessible isotropization transitions (T_i) in the range of 320–420°C, respectively. As expected, each of them had a broader range of liquid crystalline phase than the homopolymer. They had a “frozen” nematic, glassy order as determined with the wide-angle X-ray diffraction (WAXD) studies. The morphology of each of the “as-made” polyesters had a fibrous structure as determined with the scanning electron microscopy (SEM), which arises because of the liquid crystalline domains. Moreover, they had higher glass transition temperatures (T_g) in the range of 167–190°C than those of other liquid crystalline polyesters, and excellent thermal stabilities (T_d) in the range of 500–533°C, respectively. © 1995 John Wiley & Sons, Inc.     

Wholly aromatic thermotropic liquid crystalline polyesters of 3,3′-bis(phenyl)-4,4′-biphenol with 4,4′-benzophenone dicarboxylic acid

A series of wholly aromatic, thermotropic polyesters, derived from 3,3′-bis(phenyl)-4,4′-biphenol (DPBP), nonlinear 4,4′-benzophenone dicarboxylic acid (4,4′-BDA), and various linear comonomers, were prepared by the melt polycondensation reaction and characterized for their thermotropic properties by a variety of experimental techniques. The homopolymer of DPBP with 4,4′-BDA had a fusion temperature (T_f) at 265°C, exhibited a nematic phase, and had a liquid crystalline range of 105°C. All of the copolyesters of DPBP with 4,4′-BDA and either 30 mol % 4-hydroxybenzoic acid (HBA), 6-hydroxy-2-naphthoic acid (HNA), or 50 mol % terephthalic acid (TA), 2,6-naphthalenedicarboxylic acid (2,6-NDA) had low T_f values in the range of 220–285°C, exhibited a nematic phase, and had accessible isotropization transitions (T_i) in the range of 270–420°C, respectively. Their accessible T_i values would enable one to observe a biphase structure. Each of the copolymers with HBA or HNA had a much broader range of liquid crystalline phase. In contrast, each of the copolymers with TA or 2,6-NDA had a relatively narrow range of liquid crystalline phase. Each of these polyesters had a glassy, nematic morphology that was confirmed with the DSC, PLM, WAXD, and SEM studies. As expected, they had higher glass transition temperatures (T_g) in the range of 161–217°C than those of other liquid crystalline polyesters, and excellent thermal stabilities (T_d) in the range of 494–517°C, respectively. Despite their noncrystallinity, they were not soluble in common organic solvents with the exception that the homopolymer and its copolymer with TA had limited solubility in CHCl₃. However, they were soluble in the usual mixture of p-chlorophenol/1,1,2,2-tetrachloroethane (60/40 by weight) with the exception of the copolymer with 2,6-NDA. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 769–785, 1997     

Wholly aromatic thermotropic liquid crystalline polyesters of 4,4′-biphenol,substituted biphenols,and 1,1′-binaphthyl-4,4′-diol with 3,4′-benzophenone dicarboxylic acid

Wholly aromatic, thermotropic homopolyesters, derived from 4,4′-biphenol, substituted biphenols, or 1,1′-binaphthyl-4,4′-diol and 3,4′-benzophenone dicarboxylic acid, and two copolyesters, each of which contained 30 mol % of 6-hydroxy-2-naphthoic acid, were prepared by acidolysis polycondensation reactions and characterized for their liquid crystalline properties. The solubility behavior of these polymers has also been investigated. The two homopolymers of phenyl-substituted biphenols with 3,4′-benzophenone dicarboxylic acid were soluble in many common organic solvents. All of the homopolymers had lower T_m/T_f values than those with terephthalic acid, which was attributed to the incorporation of the asymmetric 3,4′-benzophenone dicarboxylate units in a head-to-head and head-to-tail fashion along the polyester chain. Two copolymers had lower T_m values than those of the respective homopolymers, as expected. They formed nematic phases which persisted up to 400°C, except those of phenyl-substituted biphenols with 3,4′-benzophenone dicarboxylic acid. Each of these two polymers also exhibited an accessible T_i transition, and had a broad range of LC phase. They had glass transition temperatures, T_g, in the range of 139-209°C and high thermal stabilities in the temperature range of 465-511°C. © 1995 John Wiley & Sons, Inc.     

4,4′‐Methylenediphenol–4,4′‐bipyridine (2/3): decarboxylation of 5,5′‐methylenedisalicylic acid under hydrothermal conditions

Reaction of 5,5′‐methylenedisalicylic acid (5,5′‐H₄mdsa) with 4,4′‐bipyridine (4,4′‐bipy) and manganese(II) acetate under hydrothermal conditions led to the unexpected 2:3 binary cocrystal 4,4′‐methylenediphenol–4,4′‐bipyridine (2/3), C₁₃H₁₂O₂·1.5C₁₀H₈N₂ or (4,4′‐H₂dhdp)(4,4′‐bipy)_1.5, which is formed with a concomitant decarboxylation. The asymmetric unit contains one and a half 4,4′‐bipy molecules, one of which straddles a centre of inversion, and one 4,4′‐H₂dhdp molecule. O—H...N interactions between the hydroxy and pyridyl groups lead to a discrete ribbon motif with an unusual 2:3 stoichiometric ratio of strong hydrogen‐bonding donors and acceptors. One of the pyridyl N‐atom donors is not involved in hydrogen‐bond formation. Additional weak C—H...O interactions between 4,4′‐bipy and 4,4′‐H₂dhdp molecules complete a two‐dimensional bilayer supramolecular structure.     

The synthesis and thermal polymerization of 4,4′-diethynylphenyl ether

Diethynylphenyl ether (DEPE) was synthesized and its thermal polymerization studied by NMR, IR, and DSC techniques. DEPE is a crystalline solid that melts at 72–73°C and undergoes polymerization beginning at about 150°C. The heat of polymerization measured by DSC was 53 ± 2 kcal/mole. Thermomechanical analysis (TMA) of the fully cured resin showed softening behavior at temperatures in excess of 400°C. Weight loss up to 720°C was only 21%. A mechanism of polymerization based on the analysis of IR and NMR data for party polymerized material below 300°C is proposed.