Atom transfer radical polymerization in aqueous dispersed media

During the last decade, atom transfer radical polymerization (ATRP) received significant attention due to its exceptional capability of synthesizing polymers with pre-determined molecular weight, well-defined molecular architectures and various functionalities. It is economically and environmentally attractive to adopt ATRP to aqueous dispersed media, although the process is challenging. This review summarizes recent developments of conducting ATRP in aqueous dispersed media. The issues related to retaining “controlled/living” character as well as colloidal stability during the polymerization have to be considered. Better understanding the ATRP mechanism and development of new initiation techniques, such as activators generated by electron transfer (AGET) significantly facilitated ATRP in aqueous systems. This review covers the most important progress of ATRP in dispersed media from 1998 to 2009, including miniemulsion, microemulsion, emulsion, suspension and dispersed polymerization.      

Stationary state of frontal radical polymerization processes

Physical causes of the absence of steady-state heat regimes of frontal radical polymerization of vinyl monomers at a nonzero rate of chemical transformations of initial reaction media are discussed. The effect of the dimensionless ??cutting?? temperature of a heat-generation source on the relative velocity of poly-merization front propagation is studied. There is an interval of ??cutting?? temperatures of the source where the velocity of polymerization front propagation is independent of the ??cutting?? temperature of the source. As for combustion processes, the front velocity depends on dimensionless parameters that are intrinsic for the heat regime of the process.     

Controlled/living heterogeneous radical polymerization in supercritical carbon dioxide

Supercritical carbon dioxide (scCO₂) is an inexpensive and environmentally friendly medium for radical polymerizations. ScCO₂ is suited for heterogeneous controlled/living radical polymerizations (CLRPs), since the monomer, initiator, and control reagents (nitroxide, etc.) are soluble, but the polymer formed is insoluble beyond a critical degree of polymerization (J_crit). The precipitated polymer can continue growing in (only) the particle phase giving living polymer of controlled well‐defined microstructure. The addition of a colloidal stabilizer gives a dispersion polymerization with well‐defined colloidal particles being formed. In recent years, nitroxide‐mediated polymerization (NMP), atom transfer radical polymerization (ATRP), and reversible addition fragmentation chain transfer (RAFT) polymerization have all been conducted as heterogeneous polymerizations in scCO₂. This Highlight reviews this recent body of work, and describes the unique characteristics of scCO₂ that allows composite particle formation of unique morphology to be achieved. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3711–3728, 2009     

Excited state processes in photoinitiators of polymerization in microheterogeneous media

A comprehensive investigation of the photopolymerization in microheterogeneous structure is carried out with a view to elucidate the role played by the excited states in the initiation process. The radical initiation of methyl methacrylate in either anionic or cationic micelles or of acrylamide in reverse microemulsion is thus examined by UV spectroscopy, steady state photolysis and time resolved laser spectroscopy. The question of the localization of the initiator is dealt with special attention. Moreover, the influence of several parameters is also considered (concentration of reactants, incident light intensity, temperature or presence of external magnetic field). This contribution demonstrates the importance of a general approach involving a thorough knowledge of the elementary steps of initiation in the understanding of any polymerization conducted in a microheterogeneous medium.     

Relationship between one-electron transition-metal reactivity and radical polymerization processes

Controlled radical polymerization has come along in leaps and bounds following the development of efficient transition-metal catalysts for atom-transfer radical polymerization. Another type of controlled radical polymerization process, namely organometallic radical polymerization, uses the reversible formation of metal-carbon bonds. Metals are also implicated in catalytic chain transfer, a process that involves the abstraction of hydrogen atoms. This Minireview discusses the importance of one-electron transition-metal reactivity in metal-mediated controlled radical polymerization processes.     

M?ssbauer spectroscopy in chemical physics of heterogeneous processes

Mössbauer studies of ultrafine clusters of iron oxides, hydroxides and metallic iron are reported. The investigations deal with the structure of clusters, their surface, and interaction of clusters with carriers. Thermodynamic considerations reveal the role of porous media in the processes of nucleation and growth of ultrafine clusters and their peculiar solid-liquid properties.     

Copper‐mediated controlled radical polymerization in continuous flow processes: Synergy between polymer reaction engineering and innovative chemistry

Copper(0)‐mediated controlled radical polymerization (CRP), or single‐electron transfer‐living radical polymerization (SET‐LRP) is a robust and dynamic technique that has attracted considerable academic and industrial interest as a synthetic tool for novel value‐added materials. Although SET‐LRP possesses many advantages over other forms of CRP, this novel chemistry still requires concurrent engineering solutions for successful commercial application. In this highlight, the evolution of atom‐transfer radical polymerization chemistry and development in continuous processes is presented, leading to recent research on the use of SET‐LRP in continuous flow tubular reactors. The proofs of concept are reviewed, and remaining challenges and unexplored potential on the use of continuous flow processes with SET‐LRP as a powerful platform for the synthesis of novel polymeric materials are discussed. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3081–3096     

Thioketone spin traps as mediating agents for free radical polymerization processes

Thioketones are demonstrated to be suitable agents for controlling free radical polymerization processes: the polymerizations carry (pseudo) living characteristics indicating that the control process is induced by a persistent radical effect.     

Atom transfer radical polymerization of methyl methacrylate using copper-based homogeneous and heterogeneous catalysts

This study aimed at polymerization of methyl methacrylate with novel catalysts in the atom transfer radical polymerization (ATRP) condition at 90 °C. This was accomplished using CuBr/N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (CuBr–AEAPTMS) as a homogeneous catalyst and one time with CuBr@AEAPTMS/SBA-15 as a heterogeneous catalyst. Catalysts were characterized using TGA, FT-IR, and UV–Vis spectroscopy. The structural analysis of the polymer was carried out by ¹³C NMR spectroscopy and GPC. Three characteristic parts of polymer produced by ATRP method including the initiator, monomer units, and end group was shown in ¹³C NMR spectra. In addition, the presence of C–Br unit showed that the polymerization process is alive. The ¹H NMR analysis was used for kinetic investigation of methyl methacrylate polymerization with homogeneous and heterogeneous catalysts that showed high monomer conversion (98 and 90% after 35 min, respectively) and good control of molecular weight with a dispersity (Р= 1.5–1.7). In addition, the plot of ln ([monomer]₀/[monomer] _t ) versus time gave linear relationships indicating a constant concentration of the propagating species throughout the polymerization. Finally, the results of the polymerization using heterogeneous catalyst compared with homogeneous catalyst revealed that it was according to ATRP method.     

Semiconductor nanoparticles for photoinitiation of free radical polymerization in aqueous and organic media

Photoinduced free radical polymerization of vinyl monomers by using semiconductor inorganic nanoparticles (NPs) is investigated. Zinc oxide and iron‐doped zinc oxide were used as photosensitive compounds to initiate the polymerization of acrylamide as a water‐soluble monomer in aqueous environment and methyl methacrylate as an oil‐soluble monomer in organic media under UV‐light irradiation. The method uses photochemically generated electrons and holes from the NPs to form initiating hydroxyl radicals in aqueous media, while tertiary amines and iodonium salt served as coinitiator in organic media. The initiation mechanism in organic media involves hydrogen abstraction or reduction processes via charge carriers, respectively. The kinetic of the polymerization in both environments was studied by means of a photo‐differential scanning calorimetry. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1500–1507     

Atom-transfer radical polymerization of poly(ethylene oxide) macromonomers in aqueous media

Soluble comb-shaped and swelling network polymers based on monomethacrylate (M = 2080) and bismethacrylate (M = 4000) poly(ethylene oxide) macromonomers, have been synthesized by the controlled atom-transfer radical polymerization in aqueous media. PEG 2000 methyl ether ethyl-2-bromoisobutyrate and 2-bromoisobutyrate, in combination with CuBr, CuBr₂, and 2,2′-bipyridyl, have been used as initiators. The length of the main chain of comb-shaped polymers, as estimated with multidetector chromatography, is in good agreement with the calculated values in the 15–20 range at M _w /M _n = 1.42–1.89. The polymerization of the methacrylate macromonomer proceeds at a high rate and with a nearly quantitative conversion. The replacement of 10–80 mol % CuBr with CuBr₂ appreciably decelerates polymerization and decreases polydispersity to 1.14–1.21, while the experimental and calculated values of chain lengths remain equal. This finding indicates a higher level of process control. The polymer networks thus prepared manifest Gaussian elastic behavior, as is evident from the relationship between the elastic modulus G and the swelling degree Q that is consistent with the classical prediction G ～ Q ^m , where m = ?1/3. Within the framework of the accepted model of networks of this type, this fact suggests the short length of polymethacrylate chains. In addition, the relationship between the time of attainment of the gelation point and the composition of the initiation system agrees with the atomtransfer controlled polymerization mechanism. The efficiencies of various radical polymerization methods for controlling the network structure are compared.     

Stereocontrol in radical polymerization

The stereospecific radical polymerization of vinyl esters, methacrylates, and alpha-substituted acrylates was studied. Fluoroalcohols, as a solvent, have remarkable effects on the stereoregularity of the radical polymerizations of vinyl acetate, vinyl pivalate, and vinyl benzoate, affording polymers rich in syndiotacticity, heterotacticity, and isotacticity, respectively. This method was successfully applied to the polymerization of methacrylates to give syndiotactic polymers. The steric repulsion between the entering monomer and the chain-end monomeric unit bound by the solvent through hydrogen bonding is important for the stereochemical control in these systems. Lewis acid catalysts, such as lanthanide trifluoromethanesulfonates and zinc salts, were also effective for the stereocontrol during the radical polymerization of methyl methacrylate, to reduce the syndiotacticity and alpha-(alkoxymethyl)acrylates to synthesize isotactic and syndiotactic polymers. Radical polymerization of the methacrylates bearing a bulky ester group, such as the triphenylmethyl methacrylate derivatives, gave highly isotactic polymers, as in the case of anionic polymerization. In addition, the control of one-handed helical conformation was attained in the radical polymerization of 1-phenyldibenzosuberyl methacrylate using chiral neomenthanethiol or cobalt(II) complexes as an additive.     

A new microwave dielectric method for studying photoinitiated chain radical polymerization processes

Measurements of both real and imaginary parts of the dielectric constant at a fixed microwave frequency have been performed on n-butyl acrylate/poly(n-butyl acrylate) mixtures. The dielectric constant of the mixtures has been compared with that of neat n-butyl acrylate during UV photoinitiated polymerization. The values of the imaginary part of the dielectric constant thus obtained have allowed determination of the instantaneous monomer concentration and verified the kinetic equation for the photoinitiated polymerization process. The limits of validity of the method as well as its capability of providing detailed kinetic information are also discussed.     

Vinyl-gem-dichlorocyclopanes in radical polymerization

Vinyl-gem-dichlorocyclopropanes in the presence of radical type initiators undergo isomerizational homo-and copolymerization with vinyl monomers to form copolymers with the random distribution of monomer units in the macrochain. As compared to vinyl monomers like methyl methacrylate, acrylonitrile, and styrene they are considerably less active. By means of ¹³C NMR spectroscopy it was shown that vinyl-gem-dichlorocyclopropanes polymerized forming steroblock polymers of mainly trans-structure.