Rare Earth Metal-Initiated Polymerizations of Polar and Nonpolar Monomers

Abstract

Organolanthanide(III) initiated polymerization of methyl methacryate gave both syndiotactic and isotactic living polymers of high molecular weight. Organolanthanide(III) initiated polymerization of alkyl acrylates also gave high molecular weight poly(alkyl acrylate)s with very narrow molecular weight distribuion in high yield. Molecular weights of the resulting polymers increased linearly with the conversion. Random and block copolymerizations of alkyl acrylates with methyl methacrylate were realized successfully. For the sake of development of the olefin polymerization catalyst, bulky substituents were introduced into Me₂Si bridged Cp rings and they were used as ligands for the lanthanide complexes. Tri- and divalent lanthanide complexes with such ligands showed high activity for olefin polymerization and gave high molecular weight polyolefins.     

Ultrafast single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization of acrylates initiated with iodoform in water at room temperature and catalyzed by sodium dithionite

Sodium dithionite in the presence of NaHCO₃ in water acts as a single‐electron‐transfer agent and facilitates the single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization (SET–DTLRP) of acrylates initiated with iodoform at room temperature. The resulting α,ω‐di(iodo)polyacrylates can be used as macroinitiators for the SET–DTLRP of other acrylates. Ultrahigh‐molar‐mass poly(tert‐butyl acrylate) can be synthesized via the SET–DTLRP of tert‐butyl acrylate and has a very low weight‐average molecular weight/number‐average molecular weight ratio of 1.15. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2178–2184, 2005     

New initiator system for the anionic polymerization of (meth)acrylates in toluene. IV. Random copolymerization of (meth)acrylates in toluene initiated by s-BuLi ligated by lithium silanolates

Copolymerization of binary mixtures of alkyl (meth)acrylates has been initiated in toluene by a mixed complex of lithium silanolate  (s-BuMe₂SiOLi) and s-BuLi (molar ratio > 21) formed in situ by reaction of s-BuLi with hexamethylcyclotrisiloxane (D₃). Fully acrylate and methacrylate copolymers, i.e., poly(methyl acrylate-co-n-butyl acrylate), poly(methyl methacrylate-co-ethyl methacrylate), poly(methyl methacrylate-co-n-butyl methacrylate), poly(methyl methacrylate-co-n-butyl methacrylate), poly(isobornyl methacrylate-co-n-butyl methacrylate), poly(isobornyl methacrylate-co-n-butyl methacrylate) of a rather narrow molecular weight distribution have been synthesized. However, copolymerization of alkyl acrylate and methyl methacrylate pairs has completely failed, leading to the selective formation of homopoly(acrylate). As result of the isotactic stereoregulation of the alkyl methacrylate polymerization by the s-BuLi/s-BuMe₂SiOLi initiator, highly isotactic random and block copolymers of (alkyl) methacrylates have been prepared and their thermal behavior analyzed. The structure of isotactic poly(ethyl methacrylate-co-methyl methacrylate) copolymers has been analyzed in more detail by Nuclear Magnetic Resonance (NMR). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2525–2535, 1999     

Polymerization of acrylates and bulky methacrylates with the use of zirconocene precursors: Block copolymers with methyl methacrylate

The polymerization behavior of cyclohexyl methacrylate and trimethylsilyloxyethyl methacrylate with the catalytic system Cp₂ZrMe₂/B(C₆F₅)₃/ZnEt₂ was examined. Block copolymers of these bulky methacrylates with methyl methacrylate (MMA), having high molecular weights and relatively narrow molecular weight distributions, were prepared. n‐Butyl acrylate and tert‐butyl acrylate were polymerized with various catalytic systems based on zirconocene complexes. These polymerizations seemed to proceed to a nonquantitative yield, producing polymers with high molecular weights and relatively low polydispersities. This behavior indicated the presence of termination reactions in the initiation step, which appeared to be faster than the propagation step. Block copolymers of these acrylates with MMA were synthesized with the catalytic system rac‐Et(Ind)₂ZrMe₂/[B(C₆F₅)₄]⁻[Me₂NHPh]⁺/ZnEt₂, starting from the polymerization of MMA. The block copolymers produced were well defined in most cases, as indicated by size exclusion chromatography, NMR, and differential scanning calorimetry measurements. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3337–3348, 2005     

Synthesis and characterization of graft copolymers of poly(vinyl chloride) with styrene and (meth)acrylates by atom transfer radical polymerization

Graft copolymers of poly(vinyl chloride) with styrene and (meth)acrylates were prepared by atom transfer radical polymerization. Poly(vinyl chloride) containing small amount of pendent chloroacetate units was used as a macroinitiator. The formation of the graft copolymer was confirmed with size exclusion chromatography (SEC), ¹H NMR and IR spectroscopy. The graft copolymers with increasing incorporation of butyl acrylate result in an increase of molecular weight. One glass transition temperature (T_g) was observed for all copolymers. T_g of the copolymer with butyl acrylate decreases with increasing content of butyl acrylate.     

Effect of the conformation of the alkyl chain on the catalytic miniemulsion copolymerization of ethylene and acrylates

The catalytic copolymerization of ethylene and acrylic monomers is a promising way of incorporating polar functionality into polyolefins and therefore enlarging the range of properties of these materials. This work shows that for the copolymerization of ethylene and C4 acrylates using a sterically encumbered Pd catalyst, the degree of incorporation of the acrylic monomer decreases with the degree of branching of the alkyl chain of the acrylate, the main reason being the difficulty for coordination of bulky acrylates to the catalytic site. This strongly affects the polymerization rate as well as the molecular weight, crystallinity and melting point temperature of the copolymers.     

Evidence for spontaneous release of acrylates from a transition-metal complex upon coupling ethene or propene with a carboxylic moiety or CO(2)

The development of a new synthetic approach to acrylates based on the formation of alkyl esters of acrylic acids has been studied. A preformed Pd-COOMe moiety is used as a model system to investigate the insertion of an olefin into the Pd--C bond. The fast elimination of acrylate is observed. Density functional calculations support the experimental findings and allow the characterization of transition states along the reaction pathway. The first example of olefin/CO(2) coupling with facile release of ethyl acrylate is also presented.     

Preparation of PEG-modified urethane acrylate emulsion and its emulsion polymerization

In order to improve stability and reduce droplet size, the PEG-modified urethane acrylates were synthesized by the reaction of polyethylene glycol (PEG) with residual isocyanate groups of urethane acrylate to incorporate hydrophilic groups into the molecular ends. The droplet sizes of the PEG-modified urethane acrylate emulsions were much smaller than those of unmodified urethane acrylate emulsions at the same surfactant composition, and the droplet sizes of these emulsions were significantly effected not by surfactant compositions and types, but by the reaction molar ratio of PEG, because the urethane acrylate containing polyoxyethylene groups as terminal groups aided the interfacial activity of surfactant molecules and acted as a polymeric surfactant. The actions of PEG-modified urethane acrylate were confirmed by the investigation of adsorption of urethane acrylate in a water/benzene interface.For polymerization of emulsions, the stability of emulsion in the process of emulsion polymerization was changed by the type of surfactant or initiator. In the case of emulsion polymerization with a water soluble initiator (K₂S₂O₈), the emulsions prepared using TWEEN 60 were broken in the process of polymerization. However, polymerization of these emulsions could be carried out using an oil soluble initiator (AIBN). The conversion of emulsion polymerization changed with the type of urethane acrylates, that is, the reaction molar ratio of PEG to 2-HEMA.     

烯烃聚合中金属化合物间的链转移反应

烯烃聚合过程中, 金属化合物之间快速可逆的链转移反应是一个重要和有用的反应, 它不仅影响催化剂的活性和实现对聚合物分子量的控制, 还可以得到长链烷基金属化合物, 进而通过后续转化得到特种聚烯烃材料, 如官能团化聚烯烃和多嵌段聚烯烃共聚物. 综述了这一方面的主要发展情况.     

Atom‐Transfer Radical Polymerization of Acrylates in an Ionic Liquid

The atom‐transfer radical polymerization (ATRP) of acrylates in 1‐butyl‐3‐methylimidazolium hexafluorophosphate was investigated. The solubility of the acrylates in the ionic liquid depends on the substituent. The homogeneous polymerization of methyl acrylate gives polymers with M̄_n close to the calculated value and relatively narrow polydispersity. In heterogeneous polymerizations of higher acrylates, with the catalyst present in the ionic liquid phase, deviations from ideal behavior are observed although the polymerization of butyl acrylate approaches the conditions of a controlled polymerization.     

取代茚基二价稀土配合物催化己内酯开环聚合反应

研究了1-环戊烷基茚基二价镱配合物(1-C5H9C9H6)2Yb(THF)2作为单组分催化剂催化己内酯开环聚合反应, 考察了催化剂用量、聚合反应时间、聚合反应温度对己内酯聚合反应的影响. 结果表明, 配合物(1-C5H9C9H6)2Yb(THF)2对己内酯聚合有较高的催化活性; 温度升高, 聚合反应的转化率增加, 但产物的数均分子量及分子量分布无明显变化; 所得聚合物分子量分布较窄. 其它几种取代茚基稀土配合物也显示出较高的催化活性, 其活性有下列次序: (1-C2H5C9H6)2Sm(THF)2>(1-C5H9C9H6)2Sm(THF)>KSm(1-C5H9C9H6)3(THF)3>(1-PhCH2C9H6)2Sm(THF)2>(1-C5H9C9H6)2Yb(THF)2, 二价钐配合物较二价镱配合物具有较高的催化活性. 通过凝胶渗透色谱法测定了聚合产物的数均分子量及其分布.     

Synthesis of amphiphilic homopolymers with high chain end functionality by SET–LRP

Single electron transfer-living radical polymerization (SET–LRP) of two amphiphilic acrylates, 2-methoxyethyl acrylate up to [M]₀/[I]₀ = 1,000 and di(ethylene glycol) 2-ethylhexyl ether acrylate up to [M]₀/[I]₀ = 200, is accomplished with good control of molecular weight and molecular weight distribution in 2,2,2-trifluoroethanol at 25 °C using hydrazine activated Cu(0) wire as catalyst, methyl 2-bromopropionate as initiator, and Me₆-TREN as ligand. The chain end functionality of the resulting polymers has been analyzed by MALDI-TOF spectrometry to demonstrate the synthesis of perfect or near-perfect chain-end functional amphiphilic homopolymers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 294–303     

Atom transfer radical polymerization of acrylates in an ionic liquid: Synthesis of block copolymers

Atom transfer radical polymerization (ATRP) of acrylates in ionic liquid, 1‐butyl‐3‐methylimidazolium hexaflurophospate, with the CuBr/CuBr₂/amine catalytic system was investigated. Sequential polymerization was performed by synthesizing AB block copolymers. Polymerization of butyl acrylate (monomer that is only partly soluble in an ionic liquid forming a two‐phase system) proceeded to practically quantitative conversion. If the second monomer (methyl acrylate) is added at this stage, polymerization proceeds, and block copolymer formed is essentially free of homopolymer according to size exclusion chromatographic analysis. The number‐average molecular weight of the copolymer is slightly higher than calculated, but the molecular weight distribution is low (M_w/M_n = 1.12). If, however, methyl acrylate (monomer that is soluble in an ionic liquid) is polymerized at the first stage, then butyl acrylate in the second‐stage situation is different. Block copolymer free of homopolymer of the first block (with M_w/M_n = 1.13) may be obtained only if the conversion of methyl acrylate at the stage when second monomer is added is not higher than 70%. Matrix‐assisted laser desorption/ionization time‐of‐flight analysis confirmed that irreversible deactivation of growing macromolecules is significant for methyl acrylate polymerization at a monomer conversion above 70%, whereas it is still not significant for butyl acrylate even at practically quantitative conversion. These results show that ATRP of butyl acrylate in ionic liquid followed by addition of a second acrylate monomer allows the clean synthesis of block copolymers by one‐pot sequential polymerization even if the first stage is carried out to complete conversion of butyl acrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2799–2809, 2002     

Stereoregularity of radically polymerized poly(alkyl acrylates) and poly(trimethylsilyl acrylates) and the preparation of syndiotactic poly(methyl acrylate)

Nuclear magnetic resonance (NMR) spectroscopy was used to determine the stereoregularity of radically polymerized poly(ethyl acrylates), poly(trimethylsilyl acrylates), and poly(isopropyl acrylate-α,β-d₂). The ethyl acrylate polymers consisted of a random configuration having about 50% of isotactic diads, and their stereoregularities were independent of the polymerization temperature (40 to ?78°C). Poly(trimethylsilyl acrylates) and poly(isopropyl acrylate-α,β-d₂) prepared at low temperatures had a syndiotactic configuration. Syndiotactic poly(methyl acrylate) was derived from syndiotactic poly(trimethylsilyl acrylate). For poly(methyl acrylate), an approximate estimation of the stereoregularity by infrared spectroscopy was proposed.     

Facile one‐pot synthesis and thermal cyclopolymerization of aryl bistrifluorovinyl ether monomers bearing reactive pendant groups

A diverse pool of aryl bistrifluorovinyl ether (BTFVE) compounds with reactive pendant groups were prepared in a facile, high yielding three step “one‐pot” synthesis from commercial 4‐bromo(trifluorovinyloxy)benzene. Monomers were confirmed from ATR–FTIR, ¹H, ¹³C, and ¹⁹F NMR, and HRMS analysis. Aryl BTFVE compounds were thermally polymerized to afford perfluorocyclobutyl (PFCB) aryl ether polymers with high number–average molecular weight (M_n) for homopolymers (17,050–27,090) and copolymers with 4,4′‐bis(trifluorovinyloxy)biphenyl monomers (27,860–56,500). The PFCB aryl ether homo‐ and copolymers collectively possess high thermal stability (>299 °C in N₂) and are readily solution processable producing optically transparent films. The thermal polymerization was achieved and reactive moieties remained intact, aside from those functionalized with acrylates. In the case with acrylate functionalized polymers, orthogonal polymerization was achieved by first photopolymerizing the acrylates followed by thermal curing of the aryl trifluorovinyl ether endgroups. Preliminary results in this study produced the successful preparation of photodefinable PFCB aryl ether material. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1887–1893, 2010     

Pulsed Initiation Polymerization Applied to Acrylate Monomers: Sources of Experimental Failure

Up to date, problems exist with the determination of k_p values with respect to acrylates. The pulsed laser polymerization (PLP) data published so far only give consistent values of k_p for temperatures below 30°C for acrylates. Recently, new insights in acrylate reactions seem to offer a plausible explanation for the failure of the pulsed initiation polymerization (PIP) experiment for acrylates that will be discussed here.     

Synthesis of star- and block-copolymers using ADMET: head-to-tail selectivity during step-growth polymerization

Control over molecular architectures obtained via ADMET polymerization is limited by the step-growth nature of this technique. A new approach to this polycondensation method is described allowing for the synthesis of diblock and star-shaped polymers with molecular weight control by using the selectivity of olefin cross-metathesis between acrylates and terminal olefins.     

THE ATOM TRANSFER RADICAL POLYMERIZATION OF LAURYL ACRYLATE

The atom transfer radical polymerization (ATRP) of dodecyl (or lauryl) acrylate (LA) has been studied and optimized to yield polymers with predetermined molecular weights and low polydispersities. The poor solubility of the catalyst complex formed with linear tridentate amines and Cu(I)Br in both LA and the non-polar solvents required for the formed poly(lauryl acrylate) (pLA) resulted in poor control of the polymer molecular weights and high polydispersity. The use of a soluble catalyst formed by complexing copper with 4,4′-di(5-nonyl)-2,2′-bipyridine, improved both molecular weight control and polydispersities. The experimental conditions were further optimized by adding deactivating Cu(II) complex to the initial reaction mixture to compensate qualitatively for differences in the rate of termination relative to other acrylates.     

Polymerization of 2-(substituted methyl)acrylate bearing ω-methoxyoligoethyleneoxy groups as side chains to new low Tg polymer

The polymerization of methyl 2-(ω-methoxyoligoethleneoxymethyl)acrylates, which were synthesized from reactions of methyl 2-bromomethylacrylate with ω-methoxyoligoethylene glycol, was investigated. All these monomers polymerized readily to high molecular weight despite expectation of the considerable steric hindrance against propagation. No influence of ceiling temperature was observed. The 2-(2-methoxyethyleneoxymethyl)acrylate exhibited similar reactivities to methyl 2-alkoxymethylacrylate reported previously in copolymerization with styrene and methyl methacrylate. The homopolymers synthesized, except for those from methyl 2-methoxymethyl- and 2-(2-methoxyethyleneoxymethyl)acrylates, were soluble in water, and all were soluble in benzene. These polymers were thermally less stable than poly(methyl methacrylate) as confirmed by thermogravimetric analysis, and all showed glass transition temperatures below 0°C. © 1993 John Wiley & Sons, Inc.     

Radical polymerization and copolymerization of methyl α-(2-carbomethoxyethyl)acrylate,a dimer of methyl acrylate,as a polymerizable α-substituted acrylate

Polymerization and copolymerization of methyl α-(2-carbomethoxyethyl)acrylate (MMEA), which is known as a dimer of methyl acrylate, were studied in relation to steric hindrance-assisted polymerization. The propagating polymer radical from MMEA was detected as a five-line spectrum and quantified by ESR spectroscopy during the bulk polymerization at 40–80°C. The absolute rate constants of propagation and termination (κ_p and κ_t) for MMEA at 60°C (κ_p = 19 L/mol s and κ_t = 5.1 × 10⁵ L/mol s) were evaluated using the concentration of the propagating radical at the steady state. The balance of the propagation and termination rates allows polymer formation from MMEA. The polymerization rate of MMEA at 60°C was less than that of MMA by a factor of about 4 at a constant monomer concentration. Although no influence of ceiling temperature was observed at a temperature ranging from 40 to 70°C, addition-fragmentation in competition with propagation reduced the molecular weight of the polymer. The content of the unsaturated end group was estimated to be 0.1% at 60°C to the total amount of the monomer units consisting of the main chain. MMEA exhibited reactivities almost similar to those of MMA toward polymer radicals. It is concluded that MMEA is one of the polymerizable acrylates bearing a substituted alkyl group as an α-substituent. Characterization of poly(MMEA) was also carried out. © 1996 John Wiley & Sons, Inc.