Improved Synthesis of Oligodeoxyribonucleotides by Solid-Phase Phosphotriester Method Utilizing O6-[2-(p-Nitrophenyl)ethyl]-2′-deoxyguanosine Derivatives

The synthesis of oligodeoxyribonucleotides on a cross-linked polystyrene solid support utilizing stable mono- and dinucleotide phosphotriester building blocks is presented. The use of O⁶[2-(p-nitrophenyl)ethyl]-2′-deoxyguanosine derivatives yields cleaner DNA fragments by suppressing side reactions. Modifications improving the phosphotriester methodology are presented. The purification methods and analysis of synthetic oligodeoxyribonucleotides are described.     

Synthesis and Characterization of p—[Perfluoro—1—（2—fluorosulfonylethoxy）]ethylated Polystyrene

A new fluorinated polystyrene bearing a p-sulbstiuted perfluoro[1-(2-fluorosulfonylethoxy)]ethyl group was synthesized via one-electron oxidation of polystyrene by perfluoro[2-(2-fluorosulfonylethoxy)]propionyl peroxide at different peroxide to polystyrene molar ratios.The yield of perfluoroalkylation decreases with the increase of the reactant molar ratio.The modified polymer has been characterized by various techniques:the ring pefluoro[1-(2-fluorosulfonylethoxy)]ethylation has been proved by FT-IR and ^19FNMR;the X-ray photoelectron spectra(XPS) show the maximum binding energy of F18,O18,C18(two kinds of carbon atoms,namely C-H and C-F)and S2p,respectively; desulfonylation of the fluorinated polystyrene appearing at 217℃ has been found by its thermogravimetric analysis (TGA).The determinations of contact angle,refractive index and glass transition temperature of the modified polymer have disclosed that when the contact angle increases with the increase of the molar ratio,the refractive index and glass transition temperature decrease.The polydispersity values indicate that the degradation of the polymer chains did not occur during the reaction.     

Asymmetric radical cyclization of (2S,3S)-2,3-butanediyl, (2S,4S)-2,4-pentanediyl,and (2S,5S)-2,5-hexanediyl bis(4-vinylbenzoate)s as a model reaction for asymmetric cyclocopolymerization

The asymmetric cyclocopolymerization of bis(4-vinylbezoate) of a chiral diol with styrene is a promising method for the preparation of optically active polystyrene derivatives because of main-chain chirality. However, the mechanism for chirality induction from the chiral diol to the main chain is still unknown. To clarify the chirality induction mechanism, we carried out the radical cyclizations of (2S,3S)-2,3-butanediyl bis(4-vinylbenzoate), (2S,4S)-2,4-pentanediyl bis(4-vinylbenzoate), and (2S,5S)-2,5-hexanediyl bis(4-vinylbenzoate) with tri-n-butyltin hydride or allyltri-n-butyltin as a chain-transfer reagent as model reactions for asymmetric cyclocopolymerization. The absolute configuration was determined with single-crystal X-ray crystallography and a circular dichroism exciton chirality method. The distribution of the stereoisomer showed (R)-configuration selectivity (21–34% diastereomeric excess) in the intramolecular cyclization and an extremely low extent (<1%) of the (S,S)-cyclized product among the four stereoisomers. Therefore, chirality induction is caused by the selective inhibition of the (S,S)-racemo configuration. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4671–4681, 2004     

Umsetzung von 3-(Dimethylamino)-2H-azirinen mit 1,3-Oxazolidin-2-thion zu 3-(2-Hydroxyethyl)-2-thiohydantoinen

Reaction of 3-(Dimethylamino)-2H-azirines with 1,3-Oxazolidine-2-thione to 3-(2-Hydroxyethyl)-2- thiohydantoins The reaction of 3-(dimethylamino)-2H-azirines 1 and 1,3-oxazolidine-2-thione ( 6 ), in MeCN at room temperature, yields, after hydrolytic workup, 3-(2-hydroxyethyl)-2-thiohydantoins 7 (Scheme 2). In the case of the spirocyclic 1c , crystallization of the crude reaction mixture leads to spiro [cyclopentane-1, 7′(7′aH)-imidazo [4, 3-b] oxazole] -5′-thione 8c . The mechanism is discussed.     

Influence of the Sacrificial Polystyrene Removal Pathway on the TiO2 Nanocapsule Structure

This study demonstrates the significant influence of the polystyrene removal pathway on the TiO₂ nanocapsules obtained from PS @TiO₂ core‐shell particles. In a first step, the polystyrene spheres were coated with titanium oxide via hydrolysis and condensation of the titanium precursor to form PS @TiO₂ core‐shell particles. Then, the creation of the empty cavity to form TiO₂ nanocapsules was achieved by removing the polystyrene template by i ) thermal decomposition of the polystyrene or ii ) dissolution of the polystyrene using Soxhlet extractor followed by a thermal procedure. These pathways to remove the polystyrene were investigated by thermogravimetric studies, IR spectroscopy, transmission and scanning electron microscopy and powder X‐ray diffraction. The final TiO₂ nanocapsule structure strongly depends on the sacrificial polystyrene removal pathway. The preservation of the TiO₂ nanocapsules was obtained essentially when the polystyrene was dissolved before the crystallization of the TiO₂.     

Improving resins for solid phase synthesis: incorporation of 1-[2-(2-methoxyethoxy)ethoxy]-4-vinyl-benzene

The preparation, characterisation and application of a series of non-grafted polystyrene (PS) resins containing a styrenic methoxypoly(ethylene glycol) (MPEG) derivative is presented. These novel PS-MPEG resins were designed to balance swelling and solvation with improved handling. The monomer, 1-[2-(2-methoxyethoxy)ethoxy]-4-vinyl-benzene, contained an inert phenyl ether linkage designed to provide broad chemical compatibility and stability, yet imparting all the favourable properties of the PEG group into the new resin, whilst maintaining a high loading capacity. The synthetic performance of the new resins compared very favourably to those of TentaGel™, ArgoGel™ and aminomethyl PS.     

Preparation of p-[(S)(—)-2-phthalimidopropionyl] polystyrene

Samples of atactic and isotactic polystyrene were acylated with N-phthaloyl-L -alanyl chloride under the conditions of Friedel-Crafts reaction. The degree of acylation was strongly dependent on molecular weight, but not on the tacticity of polystyrene. Similarly the specific rotation of acylated polymers was not influenced by the structure of the polymer chain.     

Synthesis of 2-(2-methoxyethyl)- and 2-(2-thiomethoxyethyl)-aniline and related compounds

Summary 2-(2-Nitrophenyl)-ethanol (2) was methylated with dimethyl sulfate to give 2-(2-methoxyethyl)-1-nitrobenzene (3a) which then was reduced with hydrazine hydrate in the presence ofRaney nickel to 2-(2-methoxyethyl)-aniline (1a). Compound1a can be transformed into the N-monosilylated derivative4 by lithiation withn-butyllithium and subsequent reaction with chlorotrimethylsilane. Reaction of2 withp-toluenesulfonyl chloride yields 2-(2-nitrophenyl)-ethylp-toluenesulfonate (5), which reacts with sodium thiomethoxide to give 2-(2-nitrophenyl)-ethylp-toluenesulfonate (5), which reacts with sodium thiomethoxide to give 2-(2-thiomethoxyethyl)-1-nitrobenzene (3b).3b was reduced with hydrazine hydrate in the presence ofRaney nickel to yield 2-(2-thiomethoxyethyl)-aniline (1b). Ethyl (2-nitrophenyl)-acetate (6) could be dimethylated with methyl iodide in the presence of potassiumtert-butoxide and 18-crown-6 to give ethyl 2-methyl-2-(2-nitrophenyl)-propionate (7). Reduction of7 with lithium borohydride yields 2,3-dihydro-3,3-dimethyl-1H-indole (9) and 2-[(1-hydroxy-2-methyl)-2-propyl]-aniline (10).

---

Synthese von 2-(2-Methoxyethyl)- und 2-(2-Thiomethoxyethyl)-anilin und verwandten Verbindungen

Zusammenfassung 2-(2-Nitrophenyl)-ethanol (2) wurde mit Dimethylsulfat zu 2-(2-Methoxyethyl)-1-nitrobenzol (3a) methyliert, das sich mit Hydrazinhydrat in Gegenwart vonRaney-Nickel zu 2-(2-Methoxyethyl)-anilin (1a) reduzieren läßt. Verbindung1a kann durch Metallierung mitn-Butyllithium und anschließende Reaktion mit Chlortrimethylsilan in dasN-monosilylierte Derivat4 umgewandelt werden. Reaktion von2 mitp-Toluolsulfonylchlorid ergab 2-(2-Nitrophenyl)-ethyl-p-Toluolsulfonat (5), das mit Natriumthiomethanolat zu 1-Nitro-2-(2-thiomethoxyethyl)-benzol (3b) reagiert.3b wurde mit Hydrazinhydrat in Gegenwart vonRaney-Nickel zu 2-(2-Thiomethoxyethyl)-anilin (1b) reduziert. Ethyl-2-(nitrophenyl)-acetat (6) kann mit Methyliodid in Gegenwart von Kalium-tert-butoxid und 18-Krone-6 zu Ethyl-2-methyl-2-(2-nitrophenyl)-propionat (7) dimethyliert werden. Reduktion von7 mit Lithiumborhydrid lieferte 2,3-Dihydro-3,3-dimethyl-1H-indol (9) und 2-[(1-Hydroxy-2-methyl)-2-propyl]-anilin (10).

     

Synthesis of Esters of 3-(2-Aminoethyl)-1H-indole-2-acetic Acid and 3-(2-aminoethyl)-1H-indole-2-malonic acid (= 2-[3-(2-aminoethyl)-1H-indol-2-yl]propanedioic acid) 4th communication on indoles,indolenines, and indolines

Alkyl 3-(2-aminoethyl)-1H-indole-2-acetates 6a and 6b are synthesized starting from methyl 1H-indole-2-acetate (2) via methyl 3-(2-nitroethenyl)-1H-indole-2-acetate (4) and the alkyl 3-(2-nitroethyl)-1H-indole-2-acetates 5a and (Scheme 1). Analogously, diisopropyl 3-(2-aminoethyl)-1H-indole-2-malonate 20b is obtained from diisopropyl 1H-indole-2-malonate 11c (Scheme 4). An alternative synthesis of 20a and 20b follows a route via 15–18 and the dialkyl 3-(2-azidoethyl)-1H-indole-2-malonates 19a and 19b , respectively (Scheme 3). The aminoethyl compounds 6a and 20a are easily transformed into lactams 7 and 21 , respectively. Procedures for the preparation of the indoles 2 and 11a and of the alkylating agent 14 are described. A tautomer 12 of 11a is isolated.     

Synthesis and Properties of 2-(2-Furyl)- and 2-(2-Thienyl)-1-methylphenanthro[9,10-d]imidazoles

Condensation of 9,10-phenanthrenequinone with 2-furaldehyde and 2-thiophenecarbaldehyde in glacial acetic acid in the presence of ammonium acetate gave 2-(2-furyl)- and 2-(2-thienyl)phenanthro[9,10-d]imidazoles which were converted into the corresponding 1-methyl derivatives. The furan and thiophene rings in the products lose their acidophobic properties. Depending on the conditions, electrophilic substitution reactions in 2-(2-furyl)- and 2-(2-thienyl)phenanthro[9,10-d]imidazoles occur both at the furan (thiophene) and phenanthrene moieties.     

Synthesis and Alkylation of Piperidinium 4,5-trans-3-Cyano-6-hydroxy-4-(2-iodophenyl)-6-methyl-5-(2-methylphenyl)carbamoyl-1,4,5,6-tetrahydropyridine-2-thiolate. Molecular and Crystal Structure of 3-(2-Iodophenyl)-2-(4-phenyl-2-thiazolyl)acrylonitrile

The reaction of o-iodobenzaldehyde, cyanothioacetamide, and N-acetoacetyl-o-toluidine in the presence of piperidine gave piperidinium 4,5-trans-3-cyano-6-hydroxy-4-(2-iodophenyl)-6-methyl-5-(2-methylphenyl)carbamoyl-1,4,5,6-tetrahydropyridine-2-thiolate used in the synthesis of substituted 4,5-trans-2-alkylthiotetrahydropyridines and 2-(2-thiazolyl)acrylonitriles. The structure of 3-(2-iodophenyl)-2-(4-phenyl-2-thiazolyl)acrylonitrile was studied using X-ray diffraction structural analysis.     

Synthesis and structure of the complex of 2-(2-pyridyl)-2-oxazoline with PdCl2

The reaction ofN-2-nitroxyethylpicolinamide with PdCl₂ afforded the new complexcis-[2-(2-pyridyl)-2-oxazoline-N,N′]dichloropalladium(u). The structure of this complex was established by X-ray diffraction analysis. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 561–563, March, 2000.     

An ESCA investigation of the surface photooxidation of Styrene/2-(2-Hydroxy-3-Vinyl-5-Methylphenyl)-Benzotriazole copolymers

The surface photooxidation of Styrene/2-(2-Hydroxy-3-Vinyl-5-Methylphenyl)-Benzotriazole copolymers (λ > 300 nm) has been monitored by ESCA. The rate of oxygen uptake is shown to be dependent on the concentration of HVB in the surface. At concentrations < 1% the rate appears to be very similar to that of unstabilised polystyrene and polystyrene stabilised with hydroxy-methylphenyl-benzotriazole as a 0·5% additive. The data indicate that HVB is not capable of photostabilising the surface. Transmission ir data suggest that the bulk material is photostabilised.     

Synthesis and structures of complexes ofN-2-nitroxyethylpicolinamide and 2-(2-pyridyl)-2-oxazoline with PdCl2

The reaction ofN,N′-bis(2-nitroxyethyl)pyridine-2,6-dicarboxamide with PdCl₂ afforded previously unknowncis-(N-2-nitroxyethylpicolinamide-N,N′)dichloropalladium(II) andcis-[2-(2-pyridyl)-2-oxazoline-N,N′]dichloropalladium(II), which were isolated as a cocrystallizate of the molecular compounds. Its structure was established by X-ray diffraction analysis. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1604–1606, August, 1999.     

Proton-controlled photoisomerization of 1-(2-pyridyl)-2-(2-quinolyl)ethylene

Quantum-chemical calculations (B3LYP/6-31G*) predict the formation of intramolecular hydrogen bond (IMHB) in the monoprotonated Z-isomer of 1-(2-pyridyl)-2-(2-quinolyl)ethylene (2P2Q), with this bond stabilizing the isomer relative to its E-counterpart. An experimentally observed increase in the quantum yield of trans-cis photoisomerization (φ_tc) by more than an order of magnitude (from 0.033 to 0.42 in acetonitrile) on passing from the neutral to the monoprotonated form of 2P2Q can be associated with IMHB, which manifested itself in the spectral properties of the Z-isomer. The IMHB breaks in the diprotonated form, and the value of φ_tc decreases back to the initial value. In addition to the photoisomerization, the photoreduction and photoaddition reactions of solvent molecules have been observed in an ethanol solution of 2P2Q.     

2-[2-(2,3-Dihydrobenzimidazolylidene)]- and 2-[2-(2,3-Dihydropyrido[2,3-d]imidazolylidene)]-5,5-dimethyl-1,3-cyclohexanediones

The reaction of 2-aminocarbonyl-5,5-dimethyl-1,3-cyclohexanedione with 2,3-diaminopyridine, 1,2-phenylenediamine (and its 4-methyl, 4-nitro, 4-carboxy, and 4-benzoyl derivatives), and 3,3-diaminobenzidine gave the corresponding 2-[2-(2,3-dihydrobenzimidazolylidene)]- and 2-[2-(2,3-dihydropyrido[2,3-d]imidazolylidene)]-5,5-dimethyl-1,3-cyclohexanediones. Their structure was confirmed by ¹H NMR spectroscopic data and X-ray analysis.     

Synthesis and optical behaviors of 2-(9-phenanthrenyl)-, 2-(9-anthryl)-, and 2-(1-pyrenyl)-1-alkylimidazole homologues

Eight 2-(9-phenanthrenyl)-, 2-(9-anthryl)- and 2-(1-pyrenyl)-1-alkyl-benzimidazole compounds, three 2-(9-anthryl)-1-alkylphenanthroimidazole compounds and five 4,5-diphenyl-1-alkyl-2-(9-anthryl)imidazole compounds were synthesized by alkylation reactions of the corresponding benzimidazole, phenanthroimidazole or imidazole compounds. 2-(10-Bromo-9-anthryl)-1-alkyl-benzimidazole compounds were prepared by bromination reaction of 2-(9-anthryl)-1-alkylbenzimidazole compounds. All the synthesized compounds were characterized by elemental analysis, ¹H NMR, ¹³C NMR, MS or HRMS; their absorption coefficients (), maximum absorption λ_amax, fluorescence emission maximum λ_em, Stokes shifts and fluorescence quantum yields (Φ_F) in ethyl acetate were determined; their fluorescent lifetimes (T₁ and T₂) were measured in ethyl acetate and in solid state, respectively. The crystal structure of 2-(9-anthryl)-1-n-butyl-4,5-diphenylimidazole (12a) was determined to be triclinic, space group P-1 types, using single crystal X-ray crystallography technique. The results showed that these compounds exhibited moderate fluorescence-emission abilities and higher solubility in most organic solvents than their corresponding starting materials. The relationships between the optical behaviors and structures for these compounds were discussed.     

1-( p -Fluorophenyl)-2-(2′-pyridyl)ethanol and 1-( p -fluorophenyl)-2-(2′-pyridyl)ethene obtained from the condensation reaction of 2-picoline and p -fluorophenylaldehyde under catalyst-and solvent-free conditions

The novel intermediate 1-(p-fluorophenyl)-2-(2′-pyridyl)ethanol or 2-[2′-(1-hydroxy-1-(p-fluorophenyl)ethyl]pyridine and the corresponding novel dehydration compound 1-(p-fluorophenyl)-2-(2′-pyridyl)ethene or 2-[p-fluorophenylvinyl]pyridine were obtained from the condensation reaction of p-fluorophenylaldehyde and 2-picoline under catalyst-and solvent-free conditions. The intermediate 1-(p-fluorophenyl)-2-(2′-pyridyl)ethanol was obtained at 42 h reaction time and temperature of 120°C, respectively. ¹H-NMR, IR spectroscopic data of the 1-(p-fluorophenyl)-2-(2-pyridyl)ethanol clearly showed the presence of the-CH₂-CHOH-group. The compound was obtained as a white powder with m.p. 121–122°C and a yield of 8%. For 1-(p-fluorophenyl)-2-(2-pyridyl)ethene, the reaction conditions were similar, but the reaction temperature was increased to yield the double bond in the 1-(p-fluorophenyl)-2-(2′-pyridyl)ethene. At the reaction temperature of 140°C, the compound was a slightly brown powder with a m.p. of 78°C and yield of 18%. ¹H-NMR, IR spectroscopic data for the 1-(p-fluorophenyl)-2-(2′-pyridyl)ethene showed the presence of a double bond in trans configuration (-CH=CH-), characteristic of a styrylpyridine.     

Some reactions of 2-(4-substitutedphenyl)-2-(N-methyl-N-4-substitutedbenzamido) acetic acids

In situ generated 2,4-diaryl substituted münchnones from 2-(4-substitutedphenyl)-2-(N-methyl-N-4-substitutedbenzamido)acetic acids react with acetic anhydride in the presence of 2-nitromethylene thiazolidine, which is most likely acting as a base, and unexpectedly undergo a Dakin–West type reaction and a concurrent autoxidation reaction leading to the formation of (E)-1-(N,4-dimethylbenzamido)-1-(4-fluorophenyl)prop-1-en-2-yl acetate, 4-substitutedphenyl-N-methyl-N-(4-substitutedbenzoyl) benzamides and p-substituted benzoic acids. In addition, a novel and efficient access to N-acyl urea derivatives is described by the reaction between 2-(4-substitutedphenyl)-2-(N-methyl-N-4-substitutedbenzamido)acetic acids and cyclohexyl, isopropyl carbodiimides in the presence of a base. The structures of all new products were identified on the basis of NMR and IR spectra, along with X-ray diffraction data and HRMS measurements.     

2-(2-hydroxyphenyl)-2-adamantanol in Ritter reaction

2-Substituted 4H-1,3-benzoxazines were obtained by the condensation of 2-(2-hydroxyphenyl)-2-adamantanol with aromatic and aliphatic nitriles in trifluoroacetic acid. With acetonitrile the classic product of Ritter reaction, a secondary amide, was isolated.