Catalytic diversity of diene complexes of niobium and tantalum on polymerizations of ethylene,norbornene, and methyl methacrylate

Half‐metallocene diene complexes of niobium and tantalum catalyzed three‐types of polymerization: (1) the living polymerization of ethylene by niobium and tantalum complexes, MCl₂(η⁴‐1,3‐diene)(η⁵‐C₅R₅) ( 1‐4 ; M = Nb, Ta; R = H, Me) combined with an excess of methylaluminoxane; (2) the stereoselective ring opening metathesis polymerization of norbornene by bis(benzyl) tantalum complexes, Ta(CH₂Ph)₂(η⁴‐1,3‐butadiene)(η⁵‐C₅R₅) ( 11 : R = Me; 12 : R = H) and Ta(CH₂Ph)₂(η⁴‐o‐xylylene)(η⁵‐C₅Me₅) ( 16 ); and (3) the polymerization of methyl methacrylate by butadiene‐diazabutadiene complexes of tantalum, Ta(η²‐RN=CHCH=NR)(η⁴‐1,3‐butadiene)(η⁵‐C₅Me₅) ( 25 : R = p‐methoxyphenyl; 26 : R = cyclohexyl) in the presence of an aluminum compound ( 24 ) as an activator of the monomer.     

Coordination polymerization with the novel η-C20H17Ti(OPr)3 complex

Modified corannulene based transition metal complexes of titanium as a novel group of metallocene catalysts were synthesized and investigated in coordination polymerization reactions as catalysts in the syndiospecific bulk polymerization of styrene. In comparison to the zirconium complex exo-(η⁵-C₂₀H₁₇)(η⁵-C₅H₅)ZrCl₂, the titanium complex η⁵-C₂₀H₁₇Ti(OⁱPr)₃ shows a significantly increased polymerization activity, a considerably improved stereoregularity of the syndiotactic polymer chain, indicated by the increased melting temperature of 269 °C, as well as a higher weight average molecular weight and a narrower molecular weight distribution.     

New multinuclear half-titanocene catalysts in the syndiospecific polymerization of styrene

The syndiospecific polymerization of styrene with a new class of multinuclear transition metal catalysts in the presence of methylalumoxane and triisobutylaluminum has been investigated. The new multinuclear catalysts [(η⁵-C₅Me₅)Ti]₄(μ-O)₆ and [(η⁵-C₁₃H₁₇)Ti]₄(μ-O)₆ were received by reaction of the corresponding mononuclear compounds with water and characterized by X-ray crystal structure analysis. The molecular structure of both complexes is tetrameric with six bridging oxygen atoms between the four titanium atoms, forming an adamantane-like cage structure with a substituted cyclopentadienyl ligand remaining η⁵-bonded to each titanium atom.The bulky [(η⁵-C₁₃H₁₇)Ti]₄(μ-O)₆ shows higher polymerization conversions than [(η⁵-C₅Me₅)Ti]₄(μ-O)₆. The polymerization activity is significantly increased by an enhancement of the MAO concentration after a short retardation period and levels off at MAO/[(η⁵-C₁₃H₁₇)Ti]₄(μ-O)₆ molar ratios above about 600. Triisobutylaluminum increases the polymerization yield to a maximum at a TIBA/[(η⁵-C₁₃H₁₇)Ti]₄(μ-O)₆ molar ratio of about 30-100, but considerably decreases it at higher molar ratios below the polymerization conversion reached without any additional aluminum alkyl. Both compounds affect molecular weight and molecular weight distribution without any influence on the stereospecificity of the different catalytic sites active in polymerization reactions.The new multinuclear transition metal catalysts reach about 30-50% of the polymerization activity of the mononuclear catalysts on a molar basis and show a remarkably high catalytic activity in complex-coordinative polymerizations even after storage in non-inert-atmosphere conditions. The active polymerization sites of the multinuclear catalysts are not as uniform as the active sites of the mononuclear catalysts are and provide polystyrenes of a slightly lower syndiospecificity, but do not significantly influence the weight average molecular weights.     

SYNTHESIS AND CATIONIC RING-OPENING POLYMERIZATION OF 1, 4-ANHYDRO-2, 3-DI-O-(P-AZIDOBENZYL)-α-D-RIBOPYRANOSE

New highly stereoregular 2, 3 -di- O-(p-azidobenzyl )-(1 →5 ) - α-D -ribofuranan was synthesized byselective ring-opening polymerization of 1, 4-anhydro-2, 3 - di-O -(p-azidobenzyl )-α-D -ribopyranose(ADABR) using phosphorus pentafluoride or tin tetrachloride as catalyst at low temperature indichloromethane. The monomer was obtained by the reaction of p - bromomethyl -phenyleneazide with 1, 4 -anhydro-α-D-ribose in DMF. The structure of poly(ADANR) was identified by specific rotation and ~(13)C-NMR spectroscopy. Acid chloride-AgCl_4 complex catalyst such as CH_2=C(CH_3)C~+OClO_4~- used in thepolymerization resulted in polymers with mixed structures, i.e. (1→5)-α-D-ribofuranosidic and (1→4)-β-D-ribopyranosidic units. However, with C_6H_5C~+OClO_4~- as catalyst, pure (1→5)-α-D-ribofuranan was obtained.The effects of catalyst, polymerization temperature and time on polymer stereoregularity were examined, andthe mechanism of the ring-opening polymerization was discussed.     

Polymerization of Methyl Methacrylate by Charge-Transfer Mechanism with Amines and Carbon Tetrachloride

The charge-transfer complex formed between an amine and carbon tetrachloride can initiate the polymerization of vinyl monomers in a nonaqueous solvent such as dimethylsulfoxide. Here we use cyclopentylamine (CPA) and heptylamine (HA) as the donor compounds for charge-transfer initiation of the polymerization of methl methacrylate (MMA). The rate of polymerization R_p = k[MMA]¹ [amine]^0.5 [CCl₄]^0.5 when [CCl₄] [amine] ≤ 1; when [CCl₄] [amine] < 1, R_p becomes independent of [CCl₄] and R_p = k[MMA]^1.5 [amine]^0.5. The average constant at 60°C for the polymerization of MMA in terms of monomer were (1.66 ± 0.03) × 10^?5 and (1.46 ± 0.04) × 10^?5 s^?1 with CPA and HA, respectively, when [CCl₄] [amine] ≤ 1, and (1.16 ± 0.04) × 10^?5 and (1.39 ± 0.08) × 10^?1 L/mol·s when [CCl₄]/[amine] < 1.     

KINETICS OF POLYMERIZATION OF ACRYLONITRILE INITIATED BY VANADIUM(V)-THIOUREA REDOX SYSTEM

The kinetics of polymerization of acrylonitrile (AN) initiated by quinquevalent vanadium (V~(5+))-thiourea (TU) redox system has been investigated in aqueous nitric acid in the temperature range from 30 to 50℃. The polymerization rate (R_p) can be expressed as follows: In the copolymerization of acryionitrile with methyl acrylate (MA), the reactivity ratios were found to be 1.0 and 1.1, respectively. The experimental observations suggest that the initiating species is probably a complex consisting of a central ion of Lewis acid-VO_2~+ and the ligands of Lewis bases-acrylonitrile, thiourea, and nitrate anions, while the initiating system in lower concentration, the polymerization of acrylonitrile does not occur if the thiourea is acidified prior to its reaction with quinquevalent vanadium. This indicates that the primary radicals (or the monomeric radicals in the present article) are produced by associated thiourea rather than isothlourea.     

Polymerization of substituted acetylenes by various rhodium catalysts: Comparison of catalyst activity and effect of additives

This research deals with comparison of the activity of various Rh catalysts in the polymerization of monosubstituted acetylenes and the effect of various amines used in conjunction with [Rh(nbd)Cl]₂ in the polymerization of phenylacetylene. A zwitterionic Rh complex, Rh⁺(nbd)[(η⁶‐C₆H₅)B^?(C₆H₅)₃] ( 3 ), was able to polymerize phenylacetylene ( 5a ), t‐butylacetylene ( 5b ), N‐propargylhexanamide ( 5c ) and n‐hexyl propiolate ( 5d ), and displayed higher activity than the other catalysts examined, that is [Rh(nbd)Cl]₂ ( 1 ), [Rh(cod)(O‐o‐cresol)]₂ ( 2 ), and Rh‐vinyl complex ( 4 ). Monomers 5a and 5c polymerized virtually quantitatively or in fair yields with all these catalysts, while monomer 5b was polymerizable only with catalyts 3 and 4 . Monomer 5d did not polymerize in high yields with these Rh complexes. The catalytic activity tended to decrease in the order of 3 > 4 > 2 > 1 . Although polymerization of 5a did not proceed at all in toluene with [Rh(nbd)Cl]₂ alone, it smoothly polymerized in the presence of various amines as cocatalysts. The polymerization rate as well as the molecular weight of polymer depended on the basicity and steric bulkiness of amines. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4530–4536, 2005     

Metal compounds in free-radical processes. III. Polymerization of acrylonitrile initiated by copper (II) nitrate in presence or absence of triphenylphosphine

The bulk polymerization of acrylonitrile (AN) initiated by copper (II) nitrate, Cu(II), in the absence of light has been studied. The rate of the AN polymerization may be expressed in the Cu(II) concentration range from 5 × 10^?4 to 1 × 10^?1 mole 1.^?1 by the equation, R_p = k₅[Cu(II)]^0.68, where k₅ = K_AN[AN]/(1 + K_AN[AN]). From the spectrophotometric measurements the values of 0.70 l./mole and 0.08 l, mole were obtained for the equilibrium constant at 20 and 60°C, respectively, K_AN = [C]/[AN]-[Cu(II)], corresponding to the formation of the complex C from acrylonitrile and copper (II) nitrate. An addition of triphenylphosphine (C₆H₅)₃P into the polymerization system reduces R_p, and no polymerization takes place at all provided [(C₆H₅)₃P]/[Cu-(II)] ≧ 5. The retardation effect of (C₆H₅)₃P on the polymerization of AN initiated by Cu(II) is attributed to a competitive reaction of Cu(II) with (C₆H₅)₃P in which Cu(II) is reduced and the product of this reduction CuNO₃·2(C₆H₅)₃P is inactive with respect to the polymerization of AN.     

Synthesis of high‐molecular‐weight elastomeric poly(propylene) with half‐titanocene/MAO catalyst

A novel catalyst precursor, (η⁵‐pentamethylcyclopentadienyl)titanium triallyloxide (Cp*Ti(OCH₂—CH=CH₂)₃), was prepared and employed in a study of propylene polymerization in the presence of methylaluminoxane (MAO). This work has revealed that the half‐titanocene catalyst is desirable for the production of elastomeric poly(propylene) with high molecular weight (M_w = 8–69×10⁴) as well as in good yields under typical polymerization conditions.     

Polymerization of N-vinylcarbazole by transition metal salts

The polymerization of N-vinylcarbazole (NVC) in the presence of transition metal salts such as WCI₆, MoCI₅, TaCl₅ and NbCl₅ under different reaction conditions was studied. In general, aromatic solvents were found to be superior to aliphatic solvents in the polymerization of NVC, i. e., both conversion and molecular weight were higher in aromatic solvents. It was observed that the polymerization reaction proceeds rapidly and almost quantitatively, even at low monomer concentration (< 5 × 10^?2M) and at low catalyst to monomer mole ratio (10^?5) in aromatic solvents. The copolymerization of NVC with acenaphthylene (ACN) was also investigated in solution at room temperature. The resulting homo- and copolymer were characterized by IR, NMR, x-ray diffraction, and elemental analysis. Thermal and photophysical properties are also reported. From the spectral data, the polymerization solvent was found to have a strong influence upon the polymer stereoregularity.     

Mechanism of Polymerization of 1, 3-Dioxolane Initiated by (C2H5)3 O+SbCl6 and SbCl5

The kinetics of polymerization of 1, 3-dioxolane (DiOX) initiated by (C₂H₅)₃O⁺SbCl₆ and SbCl₅ has been studied and the elementary stages of the process have been considered. The polymerization of DiOX by (C₂H₅)₃O⁺SbCl₆-is shown to proceed at a steady rate to high conversion. A constant concentration of active centers in the system is maintained due to the equal rates of decomposition of active centers and disproportionation. The nonsteady-state character of DiOX polymerization initiated by SbCl₅is associated with a relatively lower stability of the counter-ion SbCl₅ OR^? compared with SbCl₆. The initiation of DiOX polymerization by (C₂H₅)₃O⁺SbCl₆ proceeds without hydride-transfer reactions, and the concentration of active centers in the system is determined not by processes taking place in the initiation stage, but by the existence of a definite kind of equilibrium with the participation of active centers.     

Polymerization of vinyl chloride catalyzed by a titanium complex with an anionic oxygen tripod ligand

Poly(vinyl chloride) (PVC) was prepared using a titanium complex with an anionic oxygen tripod ligand [CpCo{P(O)(OEt)₂}₃]⁻ () as catalyst and methyl aluminoxane (MAO) as cocatalyst. The polymerization behavior was compared with that of pentamethyl cyclopentadienyl titanium trichloride (Me₅CpTiCl₃). It is observed that L_OEtTiCl₃ can polymerize vinyl chloride with activity comparable to that of Me₅CpTiCl₃. The PVC samples prepared with L_OEtTiCl₃/MAO exhibit bimodal molecular weight distribution and the fraction of high molecular weight peak decreases with polymerization temperature. The microstructure and thermal decomposition of the PVC obtained were studied. Five types of structural defect were detected by ¹H-NMR. Only saturated structural defects are found at low polymerization temperature, but at high polymerization temperature unsaturated structural defects, possibly resulting from dehydrochlorination of the saturated structural defects, appear as well. No head-to-head structural defect is observed. ¹³C-NMR shows that the PVC prepared by L_OEtTiCl₃ has an atactic stereostructure. Compared with the PVC from radical polymerization and anionic polymerization, the PVC samples prepared with L_OEtTiCl₃ show improved thermal stability.     

(η5-Pentamethylcyclopentadienyl)trimethyltitanium as a precursor for the syndiospecific polymerization of styrene

An equimolar mixture of Cp*Ti(CH₃)₃ (2) and Ph₃C⁺[B(C₆F₅)₄]^? (1) forms a highly active and syndioselective catalyst for the polymerization of styrene, producing 96% syndiotactic polystyrene (PS) at an activity of 0.91 × 10⁷ g PS (mol Ti)^?1 (mol styrene)^?1 h^?1. Both activity and syndioselectivity can be increased using tri–isobutylaluminum (TIBA) to scavenge the system. ESR measurements indicate that the polymerization proceeds via titanium(IV) intermediates. Catalysts derived from 2/methylaluminoxane (MAO) as well as Cp*TiCl₃/MAO also function as syndioselective styrene polymerization catalysts, but are less active than the ‘cationic’; system derived from 1 and 2.     

Anionic polymerization of MMA and renewable methylene butyrolactones by resorbable potassium salts

Three resorbable potassium salts of hydride (K[H]), enolate Me₂C?C(OⁱPr)OK (K[E]), and allyl K[1,3‐(SiMe₃)₂C₃H₃] (K[A]) have been investigated for controlled anionic polymerization of methyl methacrylate (MMA) and its cyclic analogs, naturally renewable methylene butyrolactones including α‐methylene‐γ‐butyrolactone (MBL) and γ‐methyl‐α‐methylene‐γ‐butyrolactone (MMBL). When used alone at ambient temperature in toluene, these salts exhibit no (K[H]) to low (K[A]) to modest (K[E]) polymerization activity. Mixing of K[H] and Al(C₆F₅)₃ leads to the formation of an “ate” complex, K⁺[HAl(C₆F₅)₃]^?, which has been structurally characterized by X‐ray diffraction; this complex has a high polymerization activity producing atactic PMMA, but addition of another equiv of Al(C₆F₅)₃ further enhances both the rate and the efficiency of the polymerization, now producing syndiotactic PMMA with a narrow molecular weight (MW) distribution of 1.04. The K[H]/2Al(C₆F₅)₃ system also exhibits high activity for polymerization of (M)MBL. In sharp contrast, addition of Al(C₆F₅)₃ to K[A] shuts down the polymerization at various temperatures. The most active, controlled, and syndioselective polymerization system in this series is K[E]/2Al(C₆F₅)₃. Accordingly, the polymerization control and kinetics of this most effective system have been examined in more detail. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

The syndiospecific polymerization of styrene in the presence of fluorine‐containing half‐sandwich metallocenes

The syndiospecific polymerization of styrene was investigated with the fluorine‐containing half‐sandwich complexes η⁵‐pentamethylcyclopentadienyl titanium bis(trifluoroacetate) dimer, η⁵‐octahydrofluorenyl titanium tristrifluoro‐acetate, η⁵‐octahydrofluorenyl titanium dimethoxymonotrifluoroacetate, and η⁵‐octahydrofluorenyl titanium tris(pentafluorobenzoate) in comparison to known chloride and methoxide complexes in the presence of relatively low amounts of methylalumoxane and triisobutylaluminum. After the selection of effective reaction conditions for a solvent‐free polymerization, the following orders of decreasing polymerization activity of the titanium complexes can be observed: for pentamethylcyclopentadienyl compounds, Cp*Ti(OMe)₃ > [Cp*Ti(OCOCF₃)₂]₂O ≈ Cp*TiCl₃, and for octahydrofluorenyl compounds, [656]Ti(OMe)₃ > [656]Ti(OCOC₆F₅)₃ > [656]Ti(OCH₃)₂(OCOCF₃) > [656]Ti (OCOCF₃)₃. The [656]Ti complexes, showing the highest polymerization conversions at 70 °C and in comparison with the Cp* Ti compounds, turned out to be highly efficient catalysts for the syndiospecific styrene polymerization. The fluorine‐containing Cp* and [656]Ti complexes lead to much higher molecular weights than the chloride and methoxide compounds because of a reduction in chain‐limiting transfer reactions. The introduction of only one fluorine‐containing ligand into the coordination sphere of the metal compound is obviously sufficient for a significant increase in molecular weight. The active polymerization sites of the [656]Ti complexes with methylalumoxane and triisobutylaluminum are extremely stable during storage at room temperature in regard to their polymerization activity. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2428–2439, 2000     

MoO_2Br_2体系催化丁二烯聚合中烯丙基卤素的作用

ＭｏＯ２Ｂｒ２－Ａｌ（ｉ－Ｂｕ）２ＯＰｈＣＨ３（－ｍ）体系催化丁二烯１，２－聚合过程中添加Ｃ３Ｈ５Ｘ（Ｘ＝Ｃｌ、Ｂｒ和Ｉ）对聚合物分子量有较好的调节作用，其中以Ｃ３Ｈ５Ｂｒ的调节作用最强，Ｍｎ从１７．５×１０５降至３．５×１０５，但对催化活性有一定的影响．在测定催化体系的ＵＶ光谱、（１３）Ｃ－ＮＭＲ谱、聚合活性和聚合动力学参数的基础上，讨论了Ｃ３Ｈ５Ｘ在催化体系中的行为．     

High‐Speed Living Polymerization of Polar Vinyl Monomers by Self‐Healing Silylium Catalysts

This contribution describes the development and demonstration of the ambient‐temperature, high‐speed living polymerization of polar vinyl monomers (M) with a low silylium catalyst loading (≤ 0.05 mol % relative to M). The catalyst is generated in situ by protonation of a trialkylsilyl ketene acetal (^RSKA) initiator (I) with a strong Brønsted acid. The living character of the polymerization system has been demonstrated by several key lines of evidence, including the observed linear growth of the chain length as a function of monomer conversion at a given [M]/[I] ratio, near‐precise polymer number‐average molecular weight (M_n, controlled by the [M]/[I] ratio) with narrow molecular weight distributions (MWD), absence of an induction period and chain‐termination reactions (as revealed by kinetics), readily achievable chain extension, and the successful synthesis of well‐defined block copolymers. Fundamental steps of activation, initiation, propagation, and catalyst “self‐repair” involved in this living polymerization system have been elucidated, chiefly featuring a propagation “catalysis” cycle consisting of a rate‐limiting C? C bond formation step and fast release of the silylium catalyst to the incoming monomer. Effects of acid activator, catalyst and monomer structure, and reaction temperature on polymerization characteristics have also been examined. Among the three strong acids incorporating a weakly coordinating borate or a chiral disulfonimide anion, the oxonium acid [H(Et₂O)₂]⁺[B(C₆F₅)₄]^? is the most effective activator, which spontaneously delivers the most active R₃Si⁺, reaching a high catalyst turn‐over frequency (TOF) of 6.0×10³ h^?1 for methyl methacrylate polymerization by Me₃Si⁺ or an exceptionally high TOF of 2.4×10⁵ h^?1 for n‐butyl acrylate polymerization by iBu₃Si⁺, in addition to its high (>90 %) to quantitative efficiencies and a high degree of control over M_n and MWD (1.07–1.12). An intriguing catalyst “self‐repair” feature has also been demonstrated for the current living polymerization system.     

Facile Synthesis of Linear and Cyclic Poly(diphenylacetylene)s by Molybdenum and Tungsten Catalysis

Improved methods for the synthesis of linear and cyclic poly(diphenylacetylene)s by polymerization of the corresponding diphenylacetylenes using MoCl₅- and WCl₄-based catalytic systems have been developed. MoCl₅ induces migratory insertion polymerization of diphenylacetylenes in the presence of arylation reagents such as Ph₄Sn and ArSnⁿBu₃ to produce cis-stereoregular linear poly(diphenylacetyelene)s with high molecular weights (number-average molar mass (M_n)=30,000–3,200,000) in good yields (up to 98 %). On the other hand, WCl₄ induces ring expansion polymerization of diphenylacetylenes in the presence of Ph₄Sn or reducing reagents to produce cis-stereoregular cyclic poly(diphenylacetylene)s with high molecular weights (M_n=20,000–250,000) in moderate to good yields (up to 90 %). Both catalytic systems are applicable to the polymerization of various diphenylacetylenes having polar functional groups such as esters that are not efficiently polymerized by conventional methods using WCl₆-Ph₄Sn and TaCl₅-ⁿBu₄Sn systems.     

Influences of steric bulkiness in hydrotris(pyrazolyl)borate ligands on ethylene polymerization reaction

Manganese(II) complex catalysts with hydrotris(pyrazolyl)borate ligands have been examined on their catalytic performance in ethylene polymerization and ethylene/1‐hexene copolymerization. The activities of [Mn(L6)(Cl)(NCMe)] ( 1 ) and [Mn(L10)(Cl)] ( 2 ) activated by Al(i‐Bu)₃/[Ph₃C][B(C₆F₅)₄] for ethylene polymerization go up to 326 and 11 kg mol (cat^?1) h^?1, respectively, (L6^? = hydrotris(3‐phenyl‐5‐methyl‐1‐pyrazolyl)borate anion, L10^? = hydrotris(3‐adamantyl‐5‐isopropyl‐1‐pyrazolyl)borate anion). In particular, for ethylene/1‐hexene copolymerization, complex 1 gives high‐molecular‐weight poly(ethylene‐co‐1‐hexene)s with the highest M_w of 439,000 in manganese olefin polymerization catalyst systems. Moreover, the 1‐hexene incorporation by complex 1 seems more efficient than that by [Mn(L3)(Cl)] ( 4 ) (L3^? = hydrotris(3‐tertiary butyl‐5‐isopropyl‐1‐pyrazolyl)borate anion). In this work, we demonstrated that the coordination geometry and coordination number are also important factors for ethylene polymerization reaction as well as steric hindrances and ligand frameworks in our manganese(II) catalysts. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5720–5727, 2009     

Methyl triphenylphosphonium permanganate as a novel oxidant for aniline to polyaniline-manganese(II,IV) oxide: material for high performance pseudocapacitor

In this work, organic-inorganic composite materials of polyaniline and manganese oxide were synthesized and investigated their electrochemical performance. This composite material was prepared by oxidizing aniline with methyl triphenylphosphonium permanganate as a novel organic oxidant via aqueous, emulsion, and interfacial polymerization pathways. This process led to the formation of polyaniline-sulfate salt (PANI-SA-Mn₅O₈). Formation of polyaniline-sulfate salt was confirmed from FT-IR, EDAX, and XRD results. Formation of Mn₅O₈ was supported by XRD spectrum. PANI-SA-Mn₅O₈ prepared via emulsion polymerization pathway was obtained in porous nanorod morphology with high conductivity (9.4 S cm^?1) compared to that of the other sample prepared via interfacial pathway (1.7 S cm^?1). Whereas, aqueous polymerization pathway resulted in sheet-like morphology with a conductivity of 0.8 S cm^?1. These composites were used as pseudocapacitive electrode materials. Electrochemical characterization (cyclic voltammetry, charge-discharge, and electrochemical impedance measurement) showed that composite prepared via emulsion polymerization pathway gave better electrochemical performance, and showed good cycling behavior.