Quantitative analysis of biodegradable amphiphilic poly(L-lactide)-block-poly(ethyleneglycol)-blockpoly(L-lactide) by using TG, FTIR and NMR

The thermogravimetric analysis (TG) of two series of tri-block copolymers based on poly(L,L-lactide) (PLLA) and poly(ethyleneglycol) (PEG) segments, having molar mass of 4000 or 600 g mol^–1, respectively, is reported. The prepared block copolymers presented wide range of molecular masses (800 to 47500 g mol^–1) and compositions (16 to 80 mass% PEG). The thermal stability increased with the PLLA and/or PEG segment size and the tri-block copolymers prepared from PEG 4000 started to decompose at higher temperatures compared to those copolymers from PEG 600. The copolymers compositions were determined by thermogravimetric analysis and the results were compared to other traditional quantitative spectroscopic methods, hydrogen nuclear magnetic resonance spectrometry (¹HNMR) and Fourier transform infrared spectrometry (FTIR). The PEG 4000 copolymer compositions calculated by TG and by ¹HNMR, presented differences of 1%, demonstrating feasibility of using thermogravimetric analysis for quantitative purposes.     

Thermogelling hydrogels of poly(ε-caprolactone-co-D,L-lactide)–poly(ethylene glycol)–poly(ε-caprolactone-co-D,L-lactide) and poly(ε-caprolactone-co-L-lactide)–poly(ethylene glycol)–poly(ε-caprolactone-co-L-lactide) aqueous solutions

Thermogelling poly(ε-caprolactone-co-D,L -lactide)–poly(ethylene glycol)–poly(ε-caprolactone-co-D,L -lactide) and poly(ε-caprolactone-co-L -lactide)–poly(ethylene glycol)–poly(ε-caprolactone-co-L -lactide) triblock copolymers were synthesized through the ring-opening polymerization of ε-caprolactone and D,L -lactide or L -lactide in the presence of poly(ethylene glycol). The polymerization reaction was carried out in 1,3,5-trimethylbenzene with Sn(Oct)₂ as the catalyst at various temperatures, and the yields were about 96%. The molecular weights and polydispersities (M_w/M_n) by gel permeation chromatography were in the ranges of 5140–6750 and 1.35–1.45, respectively. The differential scanning calorimetry results showed that the melting temperatures of the poly(ε-caprolactone) components were between 30 and 40 °C. By the subtle tuning of the chemical compositions and microstructures of these triblock copolymers, the aqueous solutions underwent sol–gel transitions as the temperature increased, with the suitable lower critical solution temperature in the range of 17–28 °C at different concentrations. Transesterification in the polymerization process generated the redistribution of sequences, which remarkably affected the sol–gel transition temperature. The amphiphilic copolymers formed micelles in aqueous solutions with a diameter of 62 nm and a critical micelle concentration of about 0.032 wt % at 20 °C. Micelles aggregated as the temperature increased, leading to gel formation. The sol–gel transition was studied, with a focus on the structure–property relationship. It is expected to have potential applications in drug delivery and tissue engineering. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4091–4099, 2007     

Benzo-12-crown-4 modified N-heterocyclic carbene for organocatalyst: Synthesis,characterization and degradation of block copolymers of ϵ-caprolactone with L-lactide

A set of poly(L-lactide)-poly(?-caprolactone) diblock copolymers (AB) and poly(L-lactide)-poly(?-caprolactone)-poly(L-lactide) triblock copolymers (ABA) with predictable molecular weights and relatively narrow distributions were synthesized by ring-opening polymerization of successively added ?-caprolactone (?-CL) and L-lactide (LLA) using 4-methyl benzo-12-crown-4 imidazol-2-ylidene as catalyst. The effects of polymerization conditions, such as reaction time, temperature, monomer/catalyst molar ratio and monomer concentration on the copolymerization have been discussed in detail. The resulting copolymers were characterized by ¹H-NMR, ¹³C-NMR, IR, GPC and DSC methods which confirmed the successful synthesis of block copolymers of LLA and ?-CL. Hydrolytic degradation of the polymers showed that the PLLA-PCL-PLLA copolymer exhibited faster degradation as compared with the PCL homopolymer in alkaline medium at 37°C.     

Synthesis of poly(N,N‐dimethylacrylamide)‐block‐poly(ethylene oxide)‐block‐poly(N,N‐dimethylacrylamide) and its application for separation of proteins by capillary zone electrophoresis

A series of well‐defined triblock copolymers, poly(N, N‐dimethylacrylamide)‐block‐poly(ethylene oxide)‐block‐poly(N, N‐dimethylacrylamide) (PDMA‐b‐PEO‐b‐PDMA) synthesized by atom transfer radical polymerization, were used as physical coatings for protein separation. A comparative study of EOF showed that the triblock copolymer presented good capillary coating ability and EOF efficient suppression. The effects of the M_r of PDMA block in PDMA‐b‐PEO‐b‐PDMA triblock copolymer and buffer pH on the separation of basic protein for CE were investigated. Moreover, the influence of the copolymer structure on separation of basic protein was studied by comparing the performance of PDMA‐b‐PEO‐b‐PDMA triblock copolymer with PEO‐b‐PDMA diblock copolymer. Furthermore, the triblock copolymer coating showed higher separation efficiency and better migration time repeatability than fused‐silica capillary when used in protein mixture separation and milk powder samples separation, respectively. The results demonstrated that the triblock copolymer coatings would have a wide application in the field of protein separation.     

Control of Microphase Separation of Polystyrene-Silica Nanocomposites by Using Perhydropolysilazane and Partially Epoxidized Poly(styrene-block-butadiene-block-styrene)

In order to control microphase separation of polystyrene-silica nanocomposites, perhydropolysilazane (PHPS), which is a preceramic of silica, and epoxidized poly(styrene-block-butadiene-block-styrene) triblock copolymer [E-SBS, M_w = 8.0 × 10⁴, styrene: 40 mol%, degree of epoxidization of butadiene: 20 mol%] or poly(styrene-block-butadiene-block-styrene) triblock copolymer [SBS, M_w = 1.40 × 10⁵, styrene: 30 mol%] as templates of microphase separation were blended, following the calcination of composites in steam at 60°C. Well-arranged microphase separation was formed with E-SBS, though the macrophase separation was formed with SBS. The morphology of the microphase separation of the composites with E-SBS and PHPS was widely controlled by varying the PHPS content based on Molau's law. Silica domains were formed in polybutadiene domains. NMR analysis indicated the interaction between silanyl group of PHPS and epoxy group in E-SBS. The composites on the substrate were highly transparent and the surface of the composite with 73.5 vol% of silica was harder than 4H.     

Synthesis and characterization of biodegradable block copolymers of ϵ-caprolactone and D,L-lactide initiated by potassium poly(ethylene glycol)ate

Poly(D ,L -lactide)–poly(ϵ-caprolactone)–poly(ethylene glycol)–poly(ϵ-caprolactone)–poly(D ,L -lactide) block copolymer (PLA–PCL–PEG–PCL–PLA) was prepared by copolymerization of ϵ-caprolactone (ϵ-CL) and D ,L -lactide (D ,L -LA) initiated by potassium poly(ethylene glycol)ate in THF at 25°C. The copolymers with different composition were synthesized by adjusting the mole ratio of reaction mixture. The resulted copolymers were characterized by ¹H-NMR, ¹³C-NMR, IR, DSC, and GPC. Efforts to prepare copolymers with the corresponding structure of PCL–PLA–PEG–PLA–PCL and D ,L -lactide/ϵ-caprolactone random copolymers were not successful. © 1997 John Wiley & Sons, Inc.     

Novel synthesis of biodegradable poly(lactide-co-ethylene glycol) block copolymers

Biodegradable and amphiphilic diblock copolymers [polylactide-block-poly(ethylene glycol)] and triblock copolymers [polylactide-block-poly(ethylene glycol)-block-polylactide] were synthesized by the anionic ring-opening polymerization of lactides in the presence of poly(ethylene glycol) methyl ether or poly(ethylene glycol) and potassium hexamethyldisilazide as a catalyst. The polymerization in toluene at room temperature was very fast, yielding copolymers of controlled molecular weights and tailored molecular architectures. The chemical structure of the copolymers was investigated with ¹H and ¹³C NMR. The formation of block copolymers was confirmed by ¹³C NMR and differential scanning calorimetry investigations. The monomodal profile of the molecular weight distribution by gel permeation chromatography provided further evidence of block copolymer formation as well as the absence of cyclic species. Additional confirmation of the block copolymers was obtained by the substitution of 2-butanol for poly(ethylene glycol); butyl groups were clearly identified by ¹H NMR as polymer chain end groups. The effects of the copolymer composition and lactide stereochemistry on the copolymer properties were examined. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2235–2245, 2007     

Microphase separation in thin films of supramolecular assemblies composed of a triblock copolymer and low-molecular-weight additive

The phase behavior of supramolecular assemblies (SMAs) formed by poly(4-vinylpyridine)-block-polystyrene-block-poly(4-vinylpyridine) (P4VP-b-PS-b-P4VP) triblock copolymer with 2-(4′-hydroxybenzeneazo)benzoic acid (HABA) was investigated with respect to the molar ratio (X) between HABA and 4VP monomer unit in bulk as well as in thin films. The results were compared with SMAs formed by a PS-b-P4VP diblock copolymer of similar composition as the triblock but half the molecular weight to ascertain the effect of molecular architecture on microphase separation. In bulk, both the di- and triblock SMAs showed composition-dependent morphological transitions, which could be tuned by HABA/4VP molar ratio. The domain spacing of the SMA was not significantly affected by the molecular architecture of the constituting block copolymers. In thin films also, both the di- and triblock SMAs showed more or less similar morphological transitions depending on X. Interestingly, the domain orientation of the cylindrical or lamellar microdomains in the SMAs was influenced by the molecular architecture of the block copolymer. After chloroform annealing, although the diblock SMAs showed in-plane orientation of the domains, triblock SMAs showed perpendicular domain orientation. The perpendicular orientation of the microdomains in triblock was favored because it allowed the mid-PS blocks to acquire normal distribution of loop and bridged conformations. Furthermore, the orientation of the lamellar and cylindrical microdomains of the diblock SMAs was found to switch to perpendicular orientation after annealing in 1,4-dioxane vapors. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1594–1605, 2010     

Synthesis,characterization, and property of amphiphilic fluorinated abc‐type triblock copolymers

Novel amphiphilic fluorinated ABC‐type triblock copolymers composed of hydrophilic poly(ethylene oxide) monomethyl ether (MeOPEO), hydrophobic polystyrene (PSt), and hydrophobic/lipophobic poly(perfluorohexylethyl acrylate) (PFHEA) were synthesized by atom transfer radical polymerization (ATRP) using N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA)/CuBr as a catalyst system. The bromide‐terminated diblock copolymers poly(ethylene oxide)‐block‐polystyrene (MeOPEO‐b‐PSt‐Br) were prepared by the ATRP of styrene initiated with the macroinitiator MeOPEO‐Br, which was obtained by the esterification of poly(ethylene oxide) monomethyl ether (MeOPEO) with 2‐bromoisobutyryl bromide. A fluorinated block of poly(perfluorohexylethyl acrylate) (PFHEA) was then introduced into the diblock copolymer by a second ATRP process to synthesize a novel ABC‐type triblock copolymer, poly(ethylene oxide)‐block‐polystyrene‐block‐poly(perfluorohexylethyl acrylate) (MeOPEO‐b‐PSt‐b‐PFHEA). These block copolymers were characterized by means of proton nuclear magnetic resonance (¹H NMR) and gel permeation chromatography (GPC). Water contact angle measurements revealed that the polymeric coating of the triblock copolymer (MeOPEO‐b‐PSt‐b‐PFHEA) shows more hydrophobic than that of the corresponding diblock copolymer (MeOPEO‐b‐PSt). Bovine serum albumin (BSA) was used as a model protein to evaluate the protein adsorption property and the triblock copolymer coating posseses excellent protein‐resistant character prior to the corresponding diblock copolymer and polydimethylsiloxane. These amphiphilic fluoropolymers can expect to have potential applications for antifouling coatings and antifouling membranes. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of poly(ethylene glycol) grafted poly(L-lactide)

Poly(ethylene glycol) grafted poly(L -lactide) was prepared by ring opening polymerization of L -lactide and epoxy-terminated poly(ethylene glycol) methyl ether (PEGME). Stannous octoate and Al(Et)₃·0.5 H₂O were tested as polymerization catalysts, and Al(Et)₃·0.5 H₂O was found to be more effective for the ring-opening of the epoxy group of the modified PEGME monomer. The synthesized polymers were characterized by NMR and the efficiency of the incorporation of epoxy-terminated PEGME in the copolymer was determined.     

Synthesis and characterization of side‐chain liquid crystalline ABC triblock copolymers with p‐methoxyazobenzene moieties by atom transfer radical polymerization

A series of novel side‐chain liquid crystalline ABC triblock copolymers composed of poly(ethylene oxide) (PEO), polystyrene (PS), and poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PMMAZO) were synthesized by atom transfer radical polymerization (ATRP) using CuBr/1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) as a catalyst system. First, the bromine‐terminated diblock copolymer poly(ethylene oxide)‐block‐polystyrene (PEO‐PS‐Br) was prepared by the ATRP of styrene initiated with the macro‐initiator PEO‐Br, which was obtained from the esterification of PEO and 2‐bromo‐2‐methylpropionyl bromide. An azobenzene‐containing block of PMMAZO with different molecular weights was then introduced into the diblock copolymer by a second ATRP to synthesize the novel side‐chain liquid crystalline ABC triblock copolymer poly(ethylene oxide)‐block‐polystyrene‐block‐poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PEO‐PS‐PMMAZO). These block copolymers were characterized using proton nuclear magnetic resonance (¹H NMR) and gel permeation chromatograph (GPC). Their thermotropic phase behaviors were investigated using differential scanning calorimetry (DSC) and polarized optical microscope (POM). These triblock copolymers exhibited a smectic phase and a nematic phase over a relatively wide temperature range. At the same time, the photoresponsive properties of these triblock copolymers in chloroform solution were preliminarily studied. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4442–4450, 2008     

Thermal and mechanical characterization of plasticized poly (L-lactide-co-D,L-lactide) films for food packaging

In this work amorphous poly(L-lactide-co-D,L-lactide) (PLLA/PDLLA) was blended with four different commercial adipates to obtain films with enhanced mechanical and thermal properties. Efficiency of plasticizers was evaluated by studying their compatibility with the polymer and their effect on its glass transition temperature. All plasticizers were compatible with the matrix up to a critical composition depending on its molar mass. The addition of plasticizers caused a decrease in elastic modulus and tensile stress, meanwhile elongation at break had a maximum increase for polyadipates with the lower molar mass. Monomeric adipate showed some migration at concentration higher than 10 mass%, while the addition of the higher molar mass plasticizer lead to eventual phase separation. Polyadipates with low molar mass showed a promising behaviour to overcome the brittleness in PLLA/PDLLA films.     

Synthesis and characterization of macroinitiator‐amino terminated PEG and poly(γ‐benzyl‐L‐glutamate)‐PEO‐poly(γ‐benzyl‐L‐glutamate) triblock copolymer

Macroinitiator‐amino terminated poly(ethylene glycol) (PEG) (NH₂‐PEO‐NH₂) was prepared by converting both terminal hydroxyl groups of PEG to more reactive primary amino groups. The synthetic route involved reactions of chloridize, phthalimide and finally hydrazinolysis. Furthermore, poly(γ‐benzyl‐L ‐glutamate)‐poly(ethylene oxide)‐poly(γ‐benzyl‐L ‐glutamate) (PBLG‐PEO‐PBLG) triblock copolymer was synthesized by polymerization of γ‐benzyl‐L ‐glutamate N‐carboxyanhydride (Bz‐L‐GluNCA) using NH₂‐PEO‐NH₂ as macroinitiator. The resultant NH₂‐PEO‐NH₂ and triblock copolymer were characterized by FT‐IR, ¹H‐NMR and gel permeation chromatography (GPC) techniques. The results demonstrated that the degree of amination of the NH₂‐PEO‐NH₂ could be up to 1.95. The molecular weight of the PBLG‐PEO‐PBLG triblock copolymer could be adjusted easily by controlling the molar ratio of Bz‐L ‐Glu NCA to the macroinitiator NH₂‐PEO‐NH₂. Copyright © 2004 John Wiley & Sons, Ltd.     

Segregation of Coronal Chains in Micelles Formed by Supramolecular Interactions

Summary: Spherical micelles have been formed by mixing, in DMF, a poly(styrene)‐block‐poly(2‐vinylpyridine)‐block‐poly(ethylene oxide) (PS‐block‐P2VP‐block‐PEO) triblock copolymer with either poly(acrylic acid) (PAA) or a tapered triblock copolymer consisting of a PAA central block and PEO macromonomer‐based outer blocks. Noncovalent interactions between PAA and P2VP result in the micellar core while the outer corona contains both PS and PEO chains. Segregation of the coronal chains is observed when the tapered copolymer is used.

Inclusion of comb‐like chains with short PEO teeth in the corona triggers the nanophase segregation of PS and PEO as illustrated here (PS = polystyrene; PEO = poly(ethylene oxide)).     

Novel synthesis of biodegradable amphiphilic linear and star block copolymers based on poly(ε‐caprolactone) and poly(ethylene glycol)

Biodegradable, amphiphilic, diblock poly(ε‐caprolactone)‐block‐poly(ethylene glycol) (PCL‐b‐PEG), triblock poly(ε‐caprolactone)‐block‐poly(ethylene glycol)‐block‐poly(ε‐caprolactone) (PCL‐b‐PEG‐b‐PCL), and star shaped copolymers were synthesized by ring opening polymerization of ε‐caprolactone in the presence of poly(ethylene glycol) methyl ether or poly(ethylene glycol) or star poly(ethylene glycol) and potassium hexamethyldisilazide as a catalyst. Polymerizations were carried out in toluene at room temperature to yield monomodal polymers of controlled molecular weight. The chemical structure of the copolymers was investigated by ¹H and ¹³C NMR. The formation of block copolymers was confirmed by ¹³C NMR and DSC investigations. The effects of copolymer composition and molecular structure on the physical properties were investigated by GPC and DSC. For the same PCL chain length, the materials obtained in the case of linear copolymers are viscous whereas in the case of star copolymer solid materials are obtained with low T_g and T_m temperatures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3975–3985, 2007     

Synthesis and characterization of xylan-graft-poly(L-lactide)

In this study, xylan extracted from chestnut sawdust was used to synthesize the copolymers of xylan-graft-poly(L-lactide) (xylan-g-PLLA) by grafting L-lactide monomer onto xylan and using 4-dimethylaminopyridine as a catalyst at 80°C. Depending on the synthesis conditions and parameters, synthesized xylan-g-PLLAs were either water-soluble which form homogeneous plastic films after drying at room temperature or water-insoluble ones which do not form films at all. A Graeco-Latin design of experiments was used to determine the effects of three factors (reaction time, amount of L-lactide, and amount of the catalyst) on the results of the grafting reaction: the degree of substitution (DS) and the degree of polymerization (DP) of the copolymers. The DS and DP determined by ¹HNMR showed that they increase according to the amount of L-lactide and decrease according to the reaction time while the catalyst had no influence on the copolymerization reaction. Grafting of PLLA onto xylan was confirmed by Fourier transform infrared (FT-IR) and ¹HNMR analyzes. FT-IR spectra showed absorption bands at 1,784?cm^?1 characteristic of the ester functions (C?O) and ¹HNMR spectra revealed signals between 1 and 2.5?ppm corresponding to the protons of the aliphatic chains. Thermal properties show that the temperatures of start of degradation of copolymers are lower than those of PLLA and xylan. The N,N-dimethylacetamide results showed that the glass transition temperature of xylan-g-PLLA film was 147°C. We found that the Young’s modulus of this film is close to that of polypropylene.     

Accelerated Microbial Degradation of Poly(L-lactide)

Acceleration of the biodegradation of poly(L -lactide) (PLA) was studied. We found that the degradation rate of high molecular weight (1.3×10⁵) PLA film was greatly increased by the addition of gelatin into the culture medium of the microorganisms. 100 mg of PLA film was almost completely degraded by the fungus, Tritirachium album (eukaryotic microorganisms), and by an actinomycete, Saccharothrix waywayandensis (prokaryotic microorganisms). In addition to gelatin, various insoluble proteins, peptides and amino acids also accelerate the biodegradation of PLA. Silk fibroin was the best inducer for the production of PLA-degrading enzymes of an actinomycete, Amycolatopsis orientalis.     

Poly(D,L-lactide)-block-poly(2-hydroxyethyl acrylate) block copolymers as potential biomaterials for peripheral nerve repair: in vitro and in vivo degradation studies

The properties of poly(D ,L ‐lactide)‐block‐poly(2‐hydroxyethyl acrylate) (PLA‐b‐PHEA) block copolymers by means of in vitro / in vivo (rat) degradation are investigated and compared to those of PLA homopolymer. Over 12 weeks, we observe mass loss and molecular weight decrease. In vitro and in vivo findings are very similar for each polymer tested. When a short PHEA block is used (PLA‐b‐PHEA 15 000–3 000 g · mol^?1, 85/15 wt%), the degradation process is found to be very similar to that of homo‐PLA, and to be typical of a bulk erosion mechanism, with no mass loss observed until week 7 and continuous decrease of molar mass within this timeframe. For a longer PHEA block length within the block copolymer (PLA‐b‐PHEA 15 000–7 500 g · mol^?1, 65/35 wt%), the degradation mechanism is modified, with a significant mass loss observed at early times and only a slight decrease in molar mass. The latter finding is related to the pronounced hydrophilicity and softness of the material induced by the PHEA block, which allow easy diffusion and rapid leakage of the degradation residues from the material towards the aqueous medium. Schwann cells are found to better adhere on spin‐coated films of PLA‐b‐PHEA (85/15 wt%) than on PLA ones. These results show the potential of such hydrophilized PLA‐based copolymers for use in peripheral nerve repair.

     

Bis‐hydrophilic and functional triblock terpolymers based on polyethers: Synthesis and self‐assembly in solution

A well‐defined triblock terpolymer, poly(ethylene glycol)‐block‐poly(allyl glycidyl ether)‐block‐poly(tert‐butyl glycidyl ether) (PEG‐b‐PAGE‐b‐Pt‐BGE), with a narrow molar mass distribution has been synthesized by sequential living anionic ring‐opening polymerization. Afterward, the PAGE block was modified via thiol‐ene chemistry and different sugar moieties or cysteine as a model compound for peptides could be covalently attached to the polymer backbone. The solution self‐assembly of the obtained bis‐hydrophilic triblock terpolymers in aqueous media has been studied in detail by turbidimetry, dynamic light scattering, and transmission electron microscopy (TEM and cryo‐TEM). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Novel Biodegradable Block Copolymers of Poly(ethylene glycol) (PEG) and Cationic Polycarbonate: Effects of PEG Configuration on Gene Delivery

A novel amine‐functionalized polycarbonate was synthesized and its excellent gene transfection ability in vitro is demonstrated. In the framework of adapting the cationic polycarbonate for in vivo gene delivery applications, here the design and synthesis of biodegradable block copolymers of poly(ethylene glycol) (PEG) and amine‐functionalized polycarbonate with a well‐defined molecular architecture and molecular weight is achieved by metal‐free organocatalytic ring‐opening polymerization. Copolymers in triblock cationic polycarbonate‐block‐PEG‐block‐cationic polycarbonate and diblock PEG‐block‐cationic polycarbonate configurations, in comparison with a non‐PEGylated cationic polycarbonate control, are investigated for their influence on key aspects of gene delivery. Among the polymers with similar molecular weights and N content, the triblock copolymer exhibit more favorable physicochemical (i.e., DNA binding, size, zeta‐potential, and in vitro stability) and biological (i.e., cellular uptake and luciferase reporter gene expression) properties. Importantly, the various cationic polycarbonate/DNA complexes are biocompatible, inducing minimal cytotoxicities and hemolysis. These results suggest that the triblock copolymer is a more useful architecture in future cationic polymer designs for successful systemic therapeutic applications.