Synthesis of carbosilane block copolymers by means of a living anionic polymerization of 1,1-diethylsilacyclobutane

Block polymerization of 1,1-diethylsilacyclobutane with styrene derivatives and methacrylate derivatives was investigated. Sequential addition of styrene to a living poly(1,1-diethylsilabutane), which was prepared from phenyllithium and 1,1-diethylsilacyclobutane in THF–hexane at −48°C, gave poly(1,1-diethylsilabutane)-b-polystyrene. Similarly, addition of 4-(tert-butyldimethylsiloxy)styrene to the living poly(1,1-diethylsilabutane) provided poly(1,1-diethylsilabutane)-b-poly(4-(tert-butyldimethylsiloxy)styrene). Poly(1,1-diethylsilabutane)-b-poly(methyl methacrylate) was obtained by treatment of living poly(1,1-diethylsilabutane) with 1,1-diphenylethylene followed by an addition of methyl methacrylate. Poly(1,1-diethylsilabutane)-b-poly(2-(tert-butyldimethylsiloxy)ethyl methacrylate) was also synthesized by adding 2-(tert-butyldimethylsiloxy)ethyl methacrylate to the living poly(1,1-diethylsilabutane) which was end-capped with 1,1-diphenylethylene in the presence of lithium chloride. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2699–2706, 1998     

Synthesis of new side‐group liquid crystalline block copolymers by living anionic polymerization

A new series of AB liquid crystalline (lc) block copolymers was synthesized via living anionic copolymerization of styrene as segment A and 6‐[4‐(4‐cyanophenylazo)phenoxy]hexyl methacrylate ( 1 ) as segment B. The copolymers were successfully prepared in quantitative yields and with narrow molar mass distributions. The number‐average molar mass of the segments was varied well‐defined. The polystyrene block ranged from 3 500 to 7 400 g/mol. The content of the B segment ranged from 1 to 54 wt.‐%. Thermotropic phases were detected by differential scanning calorimetry (DSC) for block copolymers with an lc segment of more than 30 wt.‐%.     

Facile one‐pot synthesis of linear and radial block copolymers of styrene and isoprene through a novel coupling agent by living anionic polymerization

A new methodology is successfully used for the concurrent synthesis of three different copolymers; diblock, triblock, and three‐armed star‐block copolymers of styrene and isoprene via the living anionic polymerization with control over the molecular weight and weight fractions of each block. The room temperature polymerization process has resulted in the well defined linear and radial block copolymers, when the living di‐block of poly(styrene‐b‐isoprene) was coupled using cheap and readily available malonyl chloride as a novel coupling agent giving nearly 100% yield. The resulting block copolymers have narrow polydispersity index (PDI = 1.01–1.09) with a good agreement between the calculated and the observed molecular weights. The results are further supported by fractionation of the block copolymers by reversed‐phase temperature gradient interaction chromatography (RP‐TGIC) technique followed by size exclusion chromatography (SEC). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2636–2641, 2010     

Synthesis of hybrid dendritic‐linear block copolymers with dendritic initiators prepared by convergent living anionic polymerization

Hybrid dendritic‐linear block copolymers were made in one‐pot by convergent living anionic polymerization. Dendritic polystyrene macroinitiators were synthesized by slowly adding a mixture of either vinylbenzyl chloride (VBC) or 4‐(chlorodimethylsilyl)styrene (CDMSS) and styrene (1 : 10 molar ratio of coupling agent to styrene) to a solution of living polystyryllithium. The addition was ceased prior to the addition of a stoichiometric amount of coupling agent to retain a living chain end. To the living dendritically branched polystyrene was then added either styrene or isoprene to polymerize a linear block from the dendritic polystyrene. The resulting copolymers were characterized by gel permeation chromatography coupled with multiangle laser light scattering (GPC‐MALLS), which clearly demonstrated the formation of diblock copolymers. The diblock copolymers were further characterized by ¹H NMR, which showed the presence of the two blocks in the case of dendritic polystyrene‐block‐linear polyisoprene. The measurement of intrinsic viscosity showed that the dilute solution properties of the block copolymers are greatly influenced by the dendritic portion. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 152–161, 2001     

Synthesis of block and graft copolymers of β-pinene and styrene by transformation of living cationic polymerization to atom transfer radical polymerization

The transformations of living cationic polymerization to ATRP to form the block and graft copolymers of β-pinene with styrene were performed. Poly(β-pinene) carrying benzyl chloride terminal [poly(β-p)StCl] was prepared by capping the living poly(β-pinene), which was obtained with 1-phenylethyl chloride/TiCl₄/Ti(OiPr)₄/nBu₄NCl initiating system, with a few units of styrene. Poly(β-p)StCl, in conjunction with CuCl and bpy, could initiate the ATRP of styrene and gave well-defined block copolymer of β-pinene and styrene. In contrast, tert-alkyl-chlorine-capped poly(β-pinene) [poly(β-p)Cl] obtained by living cationic polymerization of β-pinene per se without capping of styrene gave a mixture of desired block copolymers and unreacted poly(β-p)Cl due to the low initiating reactivity of poly(β-p)Cl. Brominated poly(β-pinene) synthesized by the quantitative bromination of poly(β-pinene) using NBS was also used to initiate the ATRP of styrene in the presence of CuBr and bpy to prepare the graft copolymer of β-pinene and styrene. The first-order kinetic characteristic and linear increment of molecule weight with the increasing of monomer conversion indicated the living nature of this ATRP grafting.     

Controlled synthesis of amphiphilic block copolymers with pendant glucose residues by living cationic polymerization

Amphiphilic block copolymers of vinyl ethers (VEs) of the type —[CH₂CH(OCH₂CH₂OR)]_m—[CH₂CH(OiBu)]_n—were synthesized by living cationic polymerization, where R is a D-glucose residue, and m and n are the degrees of polymerization (m = 20–50; n = 11–89). To obtain them, sequential living block copolymerization of isobutyl vinyl ether (IBVE) and the vinyl ether carrying 1,2:5,6-diisopropylidene-D -glucose residue was conducted by using the HCl adduct of IBVE, CH₃CH(OiBu)Cl, as initiator in conjunction with zinc iodide. These precursor block copolymers had a narrow molecular weight distribution (M̄_w/M̄_n ∼ 1.1) and a controlled composition. Treatment of them with a trifluoroacetic acid/water mixture led to the target amphiphiles. The solubility of the amphiphilic block copolymers in various solvents depended strongly on composition or the m/n ratio. Their solvent-cast thin films were observed, under a transmission electron microscope, to exhibit various microphase-separated surface morphologies such as spheres, cylinders, and lamellae, depending on composition. © 1997 John Wiley & Sons, Inc.     

Precise synthesis of thermo-responsive and water-soluble star-branched polymers and star block copolymers by living anionic polymerization

A series of thermo-responsive and water-soluble 4- and 8-arm star-branched poly(2-(2′-methoxyethoxy)ethyl methacrylate) (poly(1)) with well-defined structures were synthesized by living anionic polymerization of 1, followed by a linking reaction with a core compound substituted with either four or eight benzyl bromide moieties. Furthermore, two kinds of sequentially different 4-arm star block copolymers composed of poly(1)-block-poly ((2,2-dimethyl-1,3-dioxolan-4-yl)methyl methacrylate) (poly(4)) were also synthesized by the same linking reaction of the corresponding AB or BA diblock copolymer anion with a core compound substituted with four benzyl bromide moieties. Thus, both well-defined 4-arm (AB)₄ and (BA)₄ star-block copolymers, whose A and B are poly(1) and poly(4) segments, were successfully synthesized. These star-block copolymers were quantitatively converted to the corresponding 4-arm (AC)₄ and (CA)₄ star-block copolymers with the same compositions by hydrolytic acetal cleavage of the poly(4) segment to poly(2,3-dihydroxypropyl methacrylate) (C segment). Poly(1) segments have LCST values and, on the other hand, both water-insoluble poly(4)s and water-soluble poly(2,3-dihydroxypropyl methacrylate)s are non-thermo-responsive segments. The thermo-responsive behavior of the resulting 4- and 8-arm star-branched poly(1) as well as the 4-arm (AB)₄, (BA)₄, (AC)₄, and (CA)₄ star-branched block copolymers has been extensively studied in terms of molecular weight, arm number, composition, and block sequence. As expected, such variables were observed to affect their LCST values. Interestingly, the thermo-responsive behavior of the 4-arm (AC)₄ and (CA)₄ stars was different from that of the block copolymers used as arm segments.     

Synthesis of amphiphilic tadpole‐shaped copolymers by combination of glaser coupling with living anionic polymerization and ring‐opening polymerization

The tadpole‐shaped copolymers polystyrene (PS)‐b‐[cyclic poly(ethylene oxide) (PEO)] [PS‐b‐(c‐PEO)] contained linear tail chains of PS and cyclic head chains of PEO were synthesized by combination of Glaser coupling with living anionic polymerization (LAP) and ring‐opening polymerization (ROP). First, the functionalized polystyrene‐glycerol (PS‐Gly) with two active hydroxyl groups at ω end was synthesized by LAP of St and the subsequent capping with 1‐ethoxyethyl glycidyl ether and then deprotection of protected hydroxyl group in acid condition. Then, using PS‐Gly as macroinitiator, the ROP of EO was performed using diphenylmethylpotassium as cocatalyst for AB₂ star‐shaped copolymers PS‐b‐(PEO‐OH)₂, and the alkyne group was introduced onto PEO arm end for PS‐b‐(PEO‐Alkyne)₂. Finally, the intramolecular cyclization was performed by Glaser coupling reaction in pyridine/Cu(I)Br/N,N,N′,N″,N″‐pentamethyldiethylenetriamine system under room temperature, and tadpole‐shaped PS‐b‐(c‐PEO) was formed. The target copolymers and their intermediates were well characterized by size‐exclusion chromatography, proton nuclear magnetic resonance spectroscopy, and fourier transform infrared spectroscopy in details. The thermal properties was also determined and compared to investigate the influence of architecture on properties. The results showed that tadpole‐shaped copolymers had lower T_m, T_c, and X_c than that of their precursors of AB₂ star‐shaped copolymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and properties of polydimethylsiloxane-containing block copolymers via living radical polymerization

Polydimethylsiloxane (PDMS) block copolymers were synthesized by using PDMS macroinitiators with copper-mediated living radical polymerization. Diamino PDMS led to initiators that gave ABA block copolymers, but there was low initiator efficiency and molecular weights are somewhat uncontrolled. The use of mono- and difunctional carbinol–hydroxyl functional initiators led to AB and ABA block copolymers with narrow polydispersity indices (PDIs) and controlled number-average molecular weights (M_n's). Polymerization with methyl methacrylate (MMA) and 2-dimethylaminoethyl methacrylate (DMAEMA) was discovered with a range of molecular weights produced. Polymerizations proceeded with excellent first-order kinetics indicative of living polymerization. ABA block copolymers with MMA were prepared with between 28 and 84 wt % poly(methyl methacrylate) with M_n's between 7.6 and 35 K (PDI <1.30), which show thermal transitions characteristic of block copolymers. ABA block copolymers with DMAEMA led to amphiphilic block copolymers with M_n's between 9.5 and 45.7 K (PDIs of 1.25–1.70), which formed aggregates in solution with a critical micelle concentration of 0.1 g dm⁻³ as determined by pyrene fluorimetry experiments. Monocarbinol functional PDMS gave AB block copolymers with both MMA and DMAEMA. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1833–1842, 2001     

Synthesis of block copolymers by the transformation of cationic polymerization into reversible atom transfer radical polymerization

Azo-containing polytetrahydrofuran (PTHF) obtained by cationic polymerization was used as a macroinitiator in the reverse atom transfer radical polymerization (RATRP) of styrene and methyl acrylate in conjunction with CuCl₂/2,2′-bipyridine as a catalyst. Diblock PTHF–polystyrene and PTHF–poly(methyl acrylate) were obtained after a two-step process. In the first step of the reaction, stable chlorine-end-capped PTHF was formed with the thermolysis of azo-linked PTHF at 65–70 °C in the presence of the catalyst. Heating the system at temperatures of 100–110 °C started the polymerization of the second monomer, which resulted in the formation of block copolymers. The decomposition behavior of the azo-linked PTHF and the structure of the block copolymers were determined by ¹H NMR and gel permeation chromatography (GPC). Kinetic studies and GPC analyses further confirmed the controlled/living nature of the RATRP initiated by the polymeric radicals. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2199–2208, 2002     

Synthesis and characterization of block copolymers from 2‐vinylnaphthalene by anionic polymerization

The anionic polymerization of 2‐vinylnaphthalene (2VN) has been studied in tetrahydrofuran (THF) at ?78 °C and in toluene at 40 °C. 2VN polymerization in THF, toluene, or toluene/THF (99:1 v/v) initiated by sec‐butyllithium (sBuLi) indicates living characteristics, affording polymers with predefined molecular weights and narrow molecular weight distributions. Block copolymers of 2VN with methyl methacrylate (MMA) and tert‐butyl acrylate (tBA) have been synthesized successfully by sequential monomer addition in THF at ?78 °C initiated by an adduct of sBuLi–LiCl. The crossover propagation from poly(2‐vinylnaphthyllithium) (P2VN) macroanions to MMA and tBA appears to be living, the molecular weight and composition can be predicted, and the molecular weight distribution of the resulting block copolymer is narrow (weight‐average molecular/number‐average molecular weight < 1.3). Block copolymers with different chain lengths for the P2VN segment can easily be prepared by variations in the monomer ratios. The block copolymerization of 2VN with hexamethylcyclotrisiloxane also results in a block copolymer of P2VN and poly(dimethylsiloxane) (PDMS) contaminated with a significant amount of homo‐PDMS. Poly(2VN‐b‐nBA) (where nBA is n‐butyl acrylate) has also been prepared by the transesterification reaction of the poly(2VN‐b‐tBA) block copolymer. Size exclusion chromatography, Fourier transform infrared, and ¹H NMR measurements indicate that the resulting polymers have the required architecture. The corresponding amphiphilic block copolymer of poly(2VN‐b‐AA) (where AA is acrylic acid) has been synthesized by acidic hydrolysis of the ester group of tert‐butyl from the poly(2VN‐b‐tBA) copolymer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4387–4397, 2002     

Synthesis of well-defined macrocyclic block copolymers using living coupling agent method

Macrocyclic poly(styrene-b-butadiene) (SB) block copolymers were prepared by coupling a living poly(styrene-b-butadiene-b-styrene) (SBS) block copolymer using a living coupling agent, 1,3-bis(1-phenylethylenyl)benzene (DDPE), or a difunctional electrophile, dimethyldichlorosilane. The living poly(styrene-b-butadiene-b-styrene) block copolymer was generated from an addition product of sec-butyllithium and DDPE. A living heteroarmed star block copolymer has been prepared by coupling two moles of monolithium polystyrene with one mole of DDPE followed by reinitiation and polymerization of the butadiene monomer. The dilithium 4-armed star block copolymer was then coupled using dimethyldichlorosilane to form a cyclic polybutadiene with two attached polystyrene branches.     

Amphiphilic block copolymers by a combination of anionic polymerization and selective post-polymerization functionalization

Anionic polymerization is the oldest known living/controlled polymerization methodology that leads to well defined macromolecules. It has been also used, with considerable success, for the synthesis of amphiphilic block copolymers (AmBC), a class of functional copolymers having interesting self-assembling properties and high potential for applications in various technological fields. The use of mild and effective post-polymerization functionalization/chemical modification reactions on block copolymers has substantially increased the synthetic capabilities of anionic polymerization methodologies, toward the creation of a variety of AmBC. In this feature article we review work done on these directions in the last ten years. Some perspectives and future work on this particular field of polymer science are also discussed.     

Amphiphilic cationic block copolymers via controlled free radical polymerization

N-oxyl terminated vinylbenzyl chloride macromonomers, available via controlled free radical polymerization, were used to synthesize AB-block copolymers of vinylbenzyl chloride and styrene with low polydispersity and different block lengths and block length ratios. The vinylbenzyl chloride blocks were quantitatively converted into cationic polyelectrolytes by reactions with tertiary amines. The micellization of the synthesized amphiphilic cationic block copolymers was investigated using different techniques such as static light scattering, ultracentrifugation and size exclusion chromatography.     

Water-soluble ABC triblock copolymers based on vinyl ethers: Synthesis by living cationic polymerization and solution characterization

Water-soluble ABC triblock copolymers of methyl vinyl ether (MVE), ethyl vinyl ether (EVE), and methyl tri(ethylene glycol) vinyl ether (MTEGVE) of various block sequences and carrying 20 monomer units in each block were synthesized by living cationic polymerization. In addition to the triblocks, one AB diblock, one BA diblock, and one statistical copolymer of MVE and MTEGVE carrying 20 units of each type of monomer were synthesized as controls. Moreover, three homopolymers each carrying 20 units of MVE and end groups of varying hydrophobicity were synthesized using three different initiators. The molecular weights and molecular weight distributions of all the polymers were determined by gel permeation chromatography (GPC) in tetrahydrofuran (THF). The number average degrees of polymerization (DP_ns) and composition of all the polymers were calculated by proton nuclear magnetic resonance (¹H-NMR) spectroscopy. The molecular weights and degrees of polymerization corresponded to the values expected from the monomer/initiator ratios. The calculated polydispersities were reasonably narrow at 1.3. Aqueous GPC studies at room temperature on the triblock copolymers showed that the polymers exist as isolated chains (unimers) in solution but they tend to assemble and form micelles in the presence of a sufficiently high salt concentration apparently due to the insolubility of the EVE units under the latter conditions. Triblocks with a different block sequence exhibited a different susceptibility to salt-induced micellization, as indicated by the retention volume of the micelles and the relative micelle/unimer peak areas. Similarly, the cloud points of the triblock copolymers covered a relatively wide temperature range from 56 to 72°C. These differences in micellization and cloud points suggest a profound effect of the location of the hydrophilic MTEGVE block on copolymer association. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1181–1195, 1997     

Design of new polymer architectures by combination of anionic and cationic living polymerization techniques

The grafting of polystyryl lithium onto poly(chloroethyl vinyl ether) chains has been investigated. The reaction proceeds cleanly and quantitatively thus allowing the synthesis of comblike polymers. Since the dimensions of the polystyrene branches and of the poly(chloroethyl vinyl ether) backbone can be controlled by living polymerizations, both the length and the number of branches of the graft copolymers can be tuned. The latter behave as star polymers. The possibility to initiate a new cationic polymerization of chloroethyl vinyl ether from polystyrene branches bearing acetal termini in order to prepare the corresponding stars with poly(chloroethyl vinyl ether-b- styrene) branches is also examined. Finally access to hyperbranched polymers of controlled architecture and dimensions by deactivation of a second amount of polystyryl lithium onto the last blocks of poly(chloroethyl vinyl ether) is also reported.     

Synthesis of block copolymers by sequential carbenium ion polymerization

The sequential carbenium ion block copolymerization of ethyl vinyl ether (EVE) and isobutyl vinyl ether (IBVE) with N-vinylcarbazole (NVC) is described. Requisite conditions for the successful application of the sequential synthesis technique to these systems were established: (1) the use of stable carbocation initiator salts (e.g., Ph₃CSbCl₆) which lead to essentially terminationless polymerizations; (2) low solvent-to-monomer ratios in order to suppress any possible chain transfer to methylene dichloride molecules; (3) high ratios of initiator to monomer which create a pseudo-“living” system. The block products (PEVE-b-PNVC and PIBVE-b-PNVC) were isolated by precipitation and extraction. The intrinsic viscosities of these products displayed minima at 30°C.     

Synthesis of block copolymers by heterogeneously initiated emulsion polymerization

The contribution refers to the possibility of using emulsion polymerization of styrene, initiated by a heterogeneous initiator Chydroperoxide of isotactic powdered polypropylene) in the presence of a complex type activator, for the synthesis of block copolymers. Vinylmonomers with various water-solutibility, i.e. methyl methacrylate (MMA), acrylonitrile (AN) and maleic anhydride (MA), were utilized as comonomers of styrene. It was found that at the used conditions, the composition of block copolymers PS-b-P(S/AN) and PS-b-PCS/MA) can be varied by the time of polymerization of the first or second comonomer. The block copolymers were characterized by their molecular weight, and their thermal stability was also investigated.     

Amphiphilic block copolymers of vinyl ethers by living cationic polymerization. II. Synthesis and surface activity of macromolecular amphiphiles with pendant amino groups

Amphiphilic block polymers of vinyl ethers (VEs). $\rlap{--} [{\rm CH}_{\rm 2} {\rm CH}\left( {{\rm OCH}_{\rm 2} {\rm CH}_{\rm 2} {\rm NH}_{\rm 2} } \right)\rlap{--} ]_m \rlap{--} [{\rm CH}_{\rm 2} {\rm CH}\left( {{\rm OR}} \right)\rlap{--} ]_n \left( {{\rm R: }n{\rm - C}_{{\rm 16}} {\rm H}_{{\rm 33}} ,{\rm }n{\rm - C}_{\rm 4} {\rm H}_{\rm 9} ;m \simeq 40,{\rm n} = 1 - 10} \right)$ were prepared, each of which consists of a hydrophilic segment with pendant primary amino groups and a hydrophobic poly(alkyl VE) segment. Their precursors were obtained by the HI/I₂-initiated sequential living cationic polymerization of an alkyl VE and a VE with a phthalimide pendant (CH₂ = CHOCH₂CH₂Im; Im; phthalimide group), where the segment molecular weights and compositions (m/n ratio) could be controlled by regulating the feed ratio of two monomers and the concentration of hydrogen iodide. Hydrazinolysis of the imide functions gave the target polymers which were readily soluble in water under neutral conditions at room temperature. These amphiphilic block polymers lowered the surface tension of their aqueous solutions (0.1 wt%, 25°C) to a minimum ? 30 dyn/cm when the hydrophobic pendant R was n-C₄H₉ (n = 4–9). The polymers with n-C₄H₉ pendants in the hydrophobic segment exhibited a higher surface activity than those with n-C₁₆ H₃₃ pendants. The surface activity of the polymers also depended on the pH of the polymer solutions; the surface activity increased in more basic solutions where the ionization of the amino group (? NH₂)2? NH₃^⊕) is suppressed.