Synthesis and Cytotoxicity Evaluation of Certain α‐Methylidene‐ γ‐butyrolactones Bearing Coumarin,Flavone, Xanthone,Carbazole, and Dibenzofuran Moieties

The cytotoxicities of α‐methylidene‐γ‐butyrolactones, which are linked to coumarins (see 15 and 16 ) and to potential DNA‐intercalating carriers such as flavones, xanthones, carbazole, and dibenzofuran (see 9a – e , 10a – e , 11 , and 12 ), were studied. These compounds were synthesized via alkylation of their hydroxy precursors followed by a Reformatsky‐type condensation (Scheme). These α‐methylidene‐γ‐butyralactones were evaluated in vitro against 60 human tumor cell lines derived from nine cancer cell types and demonstrated a strong growth‐inhibitory activity against leukemia cancer cells (Tables 1 and 2). For flavone‐ and xanthone‐containing α‐methylidene‐γ‐butyrolactones 9a – e and 10a – e , respectively, the overall potency (mean value) decreased on introduction of an electron‐withdrawing substituent at the γ‐phenyl substituent and increased with an electron‐donating substituent. Comparing the different chromophores established the following order of decreasing potency (log GI₅₀): dibenzofuran ( 12 , −6.17) > flavone ( 9a , −5.96) > carbazole ( 11 , −5.80) and xanthone ( 10a , −5.77) > coumarin ( 15 , −5.60; 16 , −5.65). Among them, the dibenzofuran derivative 12 showed not only strong inhibitory activities against leukemia cancer cell lines with an average log GI₅₀ value of −7.22, but also good inhibitory activities against colon, melanoma, and breast cancer cells with average log GI₅₀ values of −6.23, −6.31, and −6.39, respectively.     

Application of Dendrimers in Anticancer Diagnostics and Therapy

The application of dendrimeric constructs in medical diagnostics and therapeutics is increasing. Dendrimers have attracted attention due to their compact, spherical three-dimensional structures with surfaces that can be modified by the attachment of various drugs, hydrophilic or hydrophobic groups, or reporter molecules. In the literature, many modified dendrimer systems with various applications have been reported, including drug and gene delivery systems, biosensors, bioimaging contrast agents, tissue engineering, and therapeutic agents. Dendrimers are used for the delivery of macromolecules, miRNAs, siRNAs, and many other various biomedical applications, and they are ideal carriers for bioactive molecules. In addition, the conjugation of dendrimers with antibodies, proteins, and peptides allows for the design of vaccines with highly specific and predictable properties, and the role of dendrimers as carrier systems for vaccine antigens is increasing. In this work, we will focus on a review of the use of dendrimers in cancer diagnostics and therapy. Dendrimer-based nanosystems for drug delivery are commonly based on polyamidoamine dendrimers (PAMAM) that can be modified with drugs and contrast agents. Moreover, dendrimers can be successfully used as conjugates that deliver several substances simultaneously. The potential to develop dendrimers with multifunctional abilities has served as an impetus for the design of new molecular platforms for medical diagnostics and therapeutics.     

Label‐free Electrochemical Bisphenol A Aptasensor Based on Designing and Fabrication of a Magnetic Gold Nanocomposite

The present study focuses on designing and fabricating an electrochemical aptasensor for the label free detection of bisphenol A (BPA) using gold nanoparticles (Au NPs) immobilized on functional cupper magnetic nanoparticles (CuFe₂O₄‐SH) and multiwall carbon nanotubes (MWCNTs) modified with aptamer and 6‐mercapto‐1‐hexanol (MCH). A number of analysis techniques were used to characterize the nanocomposite, including Fourier transform infrared spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometer, elemental mapping analysis and energy dispersive x‐ray diffraction. The results of the analyses revealed that the fabricated aptasensor had an acceptable linearity index (0.05‐9 nM) with an ultralow detection limit (25.2 pM) when used to determine BPA. Electrochemical experiments were conducted using a [Fe(CN)₆]³⁻/[Fe(CN)₆]⁴⁻ redox system. The results of the electrochemical tests indicated that the existence of Au NPs along with magnetic nanoparticles and MWCNTs in nanocomposite led to a synergistic augmentation on the surface of the modified electrode, thus facilitating the efficient sensing of BPA. This method is highly selective, sensitive and environmentally friendly. Moreover, proposed aptasensor has valuable potential applications in medical diagnostics and food industries where a fast and reliable detection of BPA is of paramount importance for the health of the public.     

Cyclometalated Palladium(II) N‐Heterocyclic Carbene Complexes: Anticancer Agents for Potent In Vitro Cytotoxicity and In Vivo Tumor Growth Suppression

Palladium(II) complexes are generally reactive toward substitution/reduction, and their biological applications are seldom explored. A new series of palladium(II) N‐heterocyclic carbene (NHC) complexes that are stable in the presence of biological thiols are reported. A representative complex, [Pd(C^N^N)(N,N′‐nBu₂NHC)](CF₃SO₃) ( Pd1 d , HC^N^N=6‐phenyl‐2,2′‐bipyridine, N,N′‐nBu₂NHC=N,N′‐di‐n‐butylimidazolylidene), displays potent killing activity toward cancer cell lines (IC₅₀=0.09–0.5 μm ) but is less cytotoxic toward a normal human fibroblast cell line (CCD‐19Lu, IC₅₀=11.8 μm ). In vivo anticancer studies revealed that Pd1 d significantly inhibited tumor growth in a nude mice model. Proteomics data and in vitro biochemical assays reveal that Pd1 d exerts anticancer effects, including inhibition of an epidermal growth factor receptor pathway, induction of mitochondrial dysfunction, and antiangiogenic activity to endothelial cells.     

Bimetallic Anionic Organic Frameworks with Solid-State Cation Conduction for Charge Storage Applications

A new phosphonate-based anionic bimetallic organic framework, with the general formula of A₄−Zn−DOBDP (wherein A is Li⁺ or Na⁺, and DOBDP⁶⁻ is the 2,5-dioxido-1,4-benzenediphosphate ligand) is prepared and characterized for energy storage applications. With four alkali cations per formula unit, the A₄−Zn−DOBDP MOF is found to be the first example of non-solvated cation conducting MOF with measured conductivities of 5.4×10⁻⁸ S cm⁻¹ and 3.4×10⁻⁸ S cm⁻¹ for Li₄- and Na₄- phases, indicating phase and composition effects of Li⁺ and Na⁺ shuttling through the channels. Three orders of magnitude increase in ionic conductivity is further attained upon solvation with propylene carbonate, placing this system among the best MOF ionic conductors at room temperature. As positive electrode material, Li₄−Zn−DOBDP delivers a specific capacity of 140 mAh g⁻¹ at a high average discharge potential of 3.2 V (vs. Li⁺/Li) with 90 % of capacity retention over 100 cycles. The significance of this research extends from the development of a new family of electroactive phosphonate-based MOFs with inherent ionic conductivity and reversible cation storage, to providing elementary insights into the development of highly sought yet still evasive MOFs with mixed-ion and electron conduction for energy storage applications.     

4-[3,5-Bis(2-hydroxyphenyl)-1,2,4-triazol-1-yl]- benzoic Acid: A Novel Efficient and Selective Iron(III) Complexing Agent

An exceptionally stable 1:2 complex [FeL₂]³⁻ is formed from the ligand H₃L and Fe^III. In contrast, the affinity of this ligand for other biometals is relatively small. These properties make H₃L a highly promising candidate for medical applications (e.g. for the treatment of iron overload).     

Lead‐ and Iodide‐Deficient (CH3NH3)PbI3 (d‐MAPI): The Bridge between 2D and 3D Hybrid Perovskites

3D and 2D hybrid perovskites, which have been known for more than 20 years, have emerged recently as promising materials for optoelectronic applications, particularly the 3D compound (CH₃NH₃)PbI₃ (MAPI). The discovery of a new family of hybrid perovskites called d ‐MAPI is reported: the association of PbI₂ with both methyl ammonium (MA⁺) and hydroxyethyl ammonium (HEA⁺) cations leads to a series of five compounds with general formulation (MA)_1−2.48x(HEA)_3.48x[Pb_1−xI_3−x]. These materials, which are lead‐ and iodide‐deficient compared to MAPI while retaining 3D architecture, can be considered as a bridge between the 2D and 3D materials. Moreover, they can be prepared as crystallized thin films by spin‐coating. These new 3D materials appear very promising for optoelectronic applications, not only because of their reduced lead content, but also in account of the large flexibility of their chemical composition through potential substitutions of MA⁺, HEA⁺, Pb²⁺ and I⁻ ions.     

Electrophilic Terminal‐Phosphinidene Complexes: Versatile Phosphorus Analogues of Singlet Carbenes

Electrophilic and nucleophilic terminal‐phosphinidene complexes are compared in terms of electronic structures and reactivities. Various precursors of the unstable electrophilic species [R−P−M] (M=Cr, Mo, W(CO)₅ and Fe(CO)₄) are discussed. The addition reactions of the electrophilic phosphinidene complexes with Lewis bases, insertion reactions into O−H, N−H, and activated C−H bonds, and cycloaddition reactions with double and triple bonds are described, as well as some rearrangements and autocondensations. Various applications to the synthesis of new organophosphorus molecules are discussed and techniques available for demetallation are given.     

Pore Geometry and Surface Engineering of Covalent Organic Frameworks for Anhydrous Proton Conduction

Developing new materials for anhydrous proton conduction under high-temperature conditions is significant and challenging. Herein, we create a series of highly crystalline covalent organic frameworks (COFs) via a pore engineering approach. We simultaneously engineer the pore geometry (generating concave dodecagonal nanopores) and pore surface (installing multiple functional groups such as −C=N−, −OH, −N=N− and −CF₃) to improve the utilization efficiency and host–guest interaction of proton carriers, hence benefiting the enhancement of anhydrous proton conduction. Upon loading with H₃PO₄, COFs can realize a proton conductivity of 2.33×10⁻² S cm⁻¹ under anhydrous conditions, among the highest values of all COF materials. These materials demonstrate good stability and maintain high proton conductivity over a wide temperature range (80–160 °C). This work paves a new way for designing COFs for anhydrous proton conduction applications, which shows great potential as high-temperature proton exchange membranes.     

Structure Elucidation of Complex Endotaxially Intergrown Lanthanum Barium Oxonitridosilicate Oxides by Combination of Microfocused Synchrotron Radiation and Transmission Electron Microscopy

Single-crystalline domains in intergrown microcrystalline material of the new compounds Ba_22.5+xLa_55−x[Si₁₂₉N_240−xO_x]O₃:Ce³⁺ and Ba_25.5+xLa_77−x[Si₁₇₀N_312−xO_9+x]O₄:Ce³⁺ were identified by transmission electron microscopy (TEM). Precise diffraction data from these domains were collected with microfocused synchrotron radiation so that crystal structure elucidation of the complex disordered networks became possible. They are composed of two different interconnected slabs of which one is similar in both compounds, which explains their notorious intergrowth. The distribution of Ba and La is indicated by the analysis of bond-valence sums and by comparison with isostructural Sr_28.5+xLa_75−x[Si₁₇₀N_312−xO_9+x]O₄. Ce³⁺ doping leads to yellow luminescence. This is a showcase that highlights the discovery and accurate characterization of new compounds relevant for luminescence applications from heterogeneous microcrystalline samples by exploiting the capability of the combination of TEM and diffraction using the latest focusing techniques for synchrotron radiation.     

A Novel Amperometric Glucose Biosensor Based on Fe3O4-Chitosan-β-Cyclodextrin/MWCNTs Nanobiocomposite

A novel enzymatic biosensing platform toward glucose is achieved with nanocomposite of magnetic nanoparticles (Fe₃O₄−CS−CD) and multi-walled carbon nanotubes (MWCNTs). The synergistic effect of chitosan, β-cyclodextrin and MWCNTs can facilitate electron transfer between enzyme and electrode based on the promoting results of the cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The new biosensors exhibited direct electron transfer (DET) from enzyme to electrode after glucose oxidase (GOx) was immobilized on the modified electrode with the nanocomposite. Consequently, the enzymatic glucose biosensor displayed a considerably wide linear range (40 μM to 1.04 mM) with a high sensitivity of 23.59 μA mM⁻¹cm⁻², low detection limit of 19.30 μM, good selectivity, reproducibility and repeatability for detecting glucose. In addition, the current response still retained at 93.4 % after 25 days. Furthermore, the practical application of glucose biosensor was test in human serum samples with satisfactory accuracy, demonstrating promising and practical potential in biomedical diagnostics.     

Catalytic Gold Chemistry: From Simple Salts to Complexes for Regioselective C−H Bond Functionalization

Gold coordinated to neutral phosphines (R₃P), N-heterocyclic carbenes (NHCs) or anionic ligands is catalytically active in functionalizing various C−H bonds with high selectivity. The sterics/electronic nature of the studied C−H bond, oxidation state of gold and stereoelectronic capacity of the coordinated auxiliary ligand are some of the associated selectivity factors in gold-catalyzed C−H bond functionalization reactions. Hence, in this review a comprehensive update about the action of different types of gold catalysts, from simple to sophisticated ones, on C−H bond reactions and their regiochemical outcome is disclosed. This review also highlights the catalytic applications of Au(I)- and Au(III)-species in creating new opportunities for the regio- and site-selective activation of challenging C−H bonds. Finally, it also intends to stress the potential applications in selective C−H bond activation associated with a variety of heterocycles recently described in the literature.     

New Textile Applications of Cyclodextrins

New areas of applications of cyclodextrins with textiles are possible. The abilityof cyclodextrins to form inclusion complexes can be used, e.g., to remove malodorfrom textile materials. The permanent fixation of cyclodextrins offers new textileswith interesting properties. Thus the formation of body odor is reduced by thecomplexation of the organic compounds of sweat. The release of perfumes fromcyclodextrins is possible by the use of textiles with fixed cyclodextrins. Pharmaceutical compounds are also set free in contact with the skin. Last but not least the analysis of the different compounds of the human sweat complexed by the cyclodextrins offers new possibilities in medical diagnostics.     

The dynamic mechanical behavior of random-in-plane short fiber-reinforced epoxy resin composites

In the present paper, the dynamic mechanical properties of random-in-plane short fiber-reinforced epoxy resin composites were studied by using a rheometrics solids analyzer. The three-point bend testing of the four composites (glass fiber/913 epoxy resin, glass fiber/924 epoxy resin, carbon fiber/913 epoxy resin and carbon fiber/924 epoxy resin) was carried out over temperatures from −100°C to 200°C at a frequency of 10 Hz and strain 0.05%. The composites based on 924 epoxy resin, which has been designed specially for high temperature applications, have less energy loss than the 913 epoxy resinbased composites. For the same resin, the carbon fiber-reinforced composites have less energy loss than the glass fiber-reinforced composites. All the composites have less energy loss than their corresponding matrices; the greater the fiber content, the lower the energy loss. The beta transition of 913 epoxy resin has been shifted to a higher temperature after being reinforced. It was shifted from −50°C to −30°C after being reinforced with glass fiber and made a diffuse shoulder-like peak commencing at −30°C after being reinforced with carbon fiber. The 924 epoxy resin has undergone the same change in beta transition as the 913 resin, though to a smaller extent. The phenomenon suggested that interactions between the macromolecules of the epoxy resins and the molecules along the fiber's surface.     

Quantitative Assessment of B−B−B,B−Hb−B,and B−Ht Bonds: From BH3 to B12H122−

We report the thermodynamic stabilities and the intrinsic strengths of three-center-two-electron B−B−B and B−H_b−B bonds ( : bridging hydrogen), and two-center-two-electron B−H_t bonds ( : terminal hydrogen) which can be served as a new, effective tool to determine the decisive role of the intermediates of hydrogenation/dehydrogenation reactions of borohydride. The calculated heats of formation were obtained with the G4 composite method and the intrinsic strengths of B−B−B, B−H_b−B, and B−H_t bonds were derived from local stretching force constants obtained at the B3LYP-D2/cc-pVTZ level of theory for 21 boron-hydrogen compounds, including 19 intermediates. The Quantum Theory of Atoms in Molecules (QTAIM) was used to deepen the inside into the nature of B−B−B, B−H_b−B, and B−H_t bonds. We found that all of the experimentally identified intermediates hindering the reversibility of the decomposition reactions are thermodynamically stable and possess strong B−B−B, B−H_b−B, and B−H_t bonds. This proves that thermodynamic data and intrinsic B−B−B, B−H_b−B, and B−H_t bond strengths form a new, effective tool to characterize new (potential) intermediates and to predict their role for the reversibility of the hydrogenation/dehydrogenation reactions.     

Selective and Tunable Near‐Infrared and Visible Light Transmittance of MoO3−x Nanocomposites with Different Crystallinity

In this Communication, we report MoO_3−x nanocomposites in which the near‐infrared and visible light transmittance can be selectively modulated through the crystallinity. The MoO_3−x nanocomposites were fabricated by a hydrothermal method, and their optical properties were characterized by UV‐Vis spectrometer. The obtained results proved the possibility to tune the nanocomposite's optical properties in the UV/Visible spectral region: crystalline MoO₃ mainly regulates the near‐infrared range (800–2600 nm), and amorphous MoO_3−x mainly changes the visible range from 350 nm to 800 nm and MoO_3−x , with semi‐crystalline structures mainly modulating around 800–1000 nm. These kinds of optical modulations could be attributed to small polar absorption, free electron absorption and plasmon absorption according to different crystallinity. Our work may create new possibilities for future applications such as photochromism, photocatalysis, and electrochromism.     

A Remarkably Efficient MnFe2O4‐based Oxidase Nanozyme

Nanomaterials‐based enzyme mimetics (nanozymes) have attracted considerable interest due to their applications in imaging, diagnostics, and therapeutic treatments. Particularly, metal‐oxide nanozymes have been shown to mimic the interesting redox properties and biological activities of metalloenzymes. Here we describe an efficient synthesis of MnFe₂O₄ nanomaterials and show how the morphology can be controlled by using a simple co‐precipitation method. The nanomaterials prepared by this method exhibit a remarkable oxidase‐like activity. Interestingly, the activity is morphology‐dependent, with nanooctahedra (NOh) exhibiting a catalytic efficiency of 2.21×10⁹ m ^?1 s^?1, the highest activity ever reported for a nanozyme.     

Solid phase microextraction of volatile organic compounds using carboxen-polydimethylsiloxane fibers

Summary A new 80 μm Carboxen-polydimethylsiloxane (PDMS) fiber for solid phase microextraction (SPME) was tested for the enrichment of volatile organic compounds from water and air. Detection limits between 13 ng L⁻¹ (CH₂Cl₂) and 0.1 ng L⁻¹ (CHCl₂Br and CHClBr₂) for the combination: Carboxen-PDMS fiber and GC-ECD and between 35 ng L⁻¹ and 45 ng L⁻¹ (BTEX compounds) for the combination: Carboxen-PDMS and GC-FID using the headspace procedure were determined. Comparisons with the 100 μm PDMS fiber and further coatings show the advantages of the Carboxen-PDMS fiber with respect to extraction efficiency. Disadvantages of the new fiber compared with the 100 μm PDMS fiber are poorer repeatability and prolongation of equilibrium time. Distribution coefficients of the BTEX compounds between aqueous solution and SPME fiber coating were calculated and compared with the results of other researchers and with octanol-water partition coefficients.     

An Interrupted Zeolite PKU-26 and Its Transformation to a Fully Four-Connected Zeolite PKU-27 upon Calcination

The thermal stability and structural transformation mechanism are critical for the industrial applications of zeolites and the design of new framework types. Herein, a new zeolite PKU-26 has been hydrothermally synthesized under fluoride conditions using a tetraethylammonium (TEA⁺) cation as the structure-directing agent (SDA) and its framework contains partial Q³ T atoms [Q³ for T(−O−T)₃OH]. Upon calcination, PKU-26 processed a single-crystal to single-crystal transformation to another novel zeolite PKU-27 with the elimination of terminal −OH groups and enhanced thermal stability up to 650 °C, exhibiting the first Q³→Q⁴ transformation [Q⁴ for T(−O−T)₄] in 3D zeolite frameworks. The mechanism of the structural transformation, involving proton transfer, framework dehydration, and TO₄ reconstruction, is proposed and supported by theoretical calculations.     

Dual Plasmonic Au−Cu2−xS Nanocomposites: Design Strategies and Photothermal Properties

Coupling two different materials to create a hybrid nanostructured system is a powerful strategy for achieving synergistically enhanced properties and advanced functionalities. In the case of Au and Cu_2−xS, their combination on the nanoscale results in dual plasmonic Au−Cu_2−xS nanocomposites that exhibit intense photon absorption in both the visible and the near-infrared spectral ranges. Their strong light-absorbing properties translate to superior photothermal transduction efficiency, making them attractive in photothermal-based applications. There are several nanostructure configurations that are possible for the Au−Cu_2−xS system, and the successful fabrication of a particular architecture often requires a carefully planned synthetic strategy. In this Minireview, the different synthetic approaches that can be employed to produce rationally designed Au−Cu_2−xS nanocomposites are presented, with a focus on the experimental protocols that can lead to heterodimer, core–shell, reverse core–shell, and yolk–shell configurations. The photothermal behavior of these materials is also discussed, providing a glimpse of their potential use as photothermally active agents in therapeutic and theranostic applications.