UV irradiation gradient induced banded texture in photo-polymerized ethyl-cyanoethyl cellulose/poly(acrylic acid) cholesteric liquid crystalline films and patterns fabrication thereof

The photo-polymerization-induced banded texture of ethyl-cyanoethyl cellulose/acrylic acid/copper acrylate ((E-CE)C/AA/CuAA₂) cholesteric liquid crystalline (CLC) solutions were investigated. The results indicate that the CLC phase can be fixed by the photo-polymerization. Banded texture was obtained in the photo-polymerized CLC films. The orientation of the banded texture induced by the photo-polymerization depends on the gradient of UV irradiations on the surface of the (E-CE)C/AA/CuAA₂ CLC solutions. CLC films with different patterns can be obtained by introducing the UV irradiation gradient on the (E-CE)C/AA/CuAA₂ CLC solutions surface by using masks with different patterns. The simple approach for the fabrication of CLC films with different patterns may have the potential application in the fields of holographic image storage.     

Lyotropic liquid crystalline phases formed in an ionic liquid

Lyotropic liquid crystalline phases of an amphiphilic block copolymer are constructed and characterized in an ionic liquid with comparison of component and temperature effects.     

Polymerization of polymer/ferroelectric liquid crystal composites formed with branched liquid crystalline bismethacrylates

Polymerization and phase behaviour of a branched liquid crystalline bismethacrylate in a ferroelectric liquid crystal (FLC) were characterized. Addition of the monomer increases the temperature range of the smectic A phase, and, at relatively low concentrations of monomer, the temperature range increases to more than 10 times that observed in the neat FLC. Other phases such as the smectic C* phase are no longer exhibited as the monomer interferes with the inherent tilt of the FLC molecules. After polymerization, the polymer network phase separates and the phase transition temperatures return to values close to those of the FLC. The monomer also shows a high degree of orientational order before polymerization, which is retained to a large extent after polymerization. The order in the polymer network results in considerable birefringence at temperatures well above the clearing point of the pure FLC. This behaviour is induced by the order of the polymer network and interactions of the FLC molecules with the network which prevent a fraction of the FLC molecules from exhibiting typical phase behaviour. In the formation of the branched liquid crystalline bismethacrylates/FLC composites, a steady increase is observed in the polymerization rate as the polymerization temperature increases and the order of the FLC phase decreases, a behaviour significantly different from that observed in other monomer/FLC mixtures for which the polymerization rate increases as the order of the FLC phase increases. Additionally, at appropriate polymerization temperatures around the clearing point, polymerization driven endothermic phase transitions may be observed.     

Radiation grafting of pH and thermosensitive N-isopropylacrylamide and acrylic acid onto PTFE films by two-steps process

Polytetrafluoroethylene (PTFE) was grafted (g) with acrylic acid (AAc) by γ-ray pre-irradiation method to get PTFE-g-AAc films, then N-isopropylacrylamide (NIPAAm) was grafted onto PTFE-g-AAc films with γ-ray to get (PTFE-g-AAc)-g-NIPAAm. PTFE films were irradiated in air at a dose rate of 3.0 kGy h^–1 and different radiation dose. The irradiated films were placed in glass ampoules, which contained aqueous solutions with different monomer concentration (AAc), and then they were heated at different temperatures and reaction time. NIPAAm onto PTFE-g-AAc was carried out with the same procedure with monomer concentration of 1 mol L⁻¹. The thermosensitivity of the samples was defined and calculated as the ratio of the grafted samples swelling at 28 and 35 °C, and pH sensitivity defined as the ratio of the grafted samples swelling at pH 2 and 8.     

液晶聚合物的单层与Langmuir-Blodgett膜

系统研究了手性液晶聚硅氧烷和光致变色液晶聚硅氧烷两个毓的侧链液晶聚合物在空气/水界面的单层行为和Langmuir-Blodgett(LB)膜沉积特性,对LB膜结构与存在的聚集现象进行了系统的表征,并初步探讨了LB膜中液晶聚合物表现的功能性。     

Synthesis,characterization and coating applications of liquid crystalline acrylic copolymers

The synthesis and characterization of the coating properties of liquid crystalline acrylic copolymers containing p -hydroxybenzoic acid as mesogenic group are described. The synthetic method involves the grafting of p-hydroxybenzoic acid onto acrylic copolymers, confirmed by characterization with IR and ¹H NMR techniques. The presence of liquid crystal was assessed by observing optical textures under the polarizing microscope and by DSC and TGA. The coating properties such as flexibility, hardness, adhesion, drying time, viscosity, etc. of acrylic copolymers as well as of liquid crystalline acrylic copolymers were studied. The results showed that LC polymers have potential for coating applications.     

Synthesis, characterization and coating applications of liquid crystalline acrylic copolymers

The synthesis and characterization of the coating properties of liquid crystalline acrylic copolymers containing p -hydroxybenzoic acid as mesogenic group are described. The synthetic method involves the grafting of p-hydroxybenzoic acid onto acrylic copolymers, confirmed by characterization with IR and ¹H NMR techniques. The presence of liquid crystal was assessed by observing optical textures under the polarizing microscope and by DSC and TGA. The coating properties such as flexibility, hardness, adhesion, drying time, viscosity, etc. of acrylic copolymers as well as of liquid crystalline acrylic copolymers were studied. The results showed that LC polymers have potential for coating applications.     

Rotational reorganization of doped cholesteric liquid crystalline films

In this paper an unprecedented rotational reorganization of cholesteric liquid crystalline films is described. This rotational reorganization results from the conversion of a chiral molecular motor dopant to an isomer with a different helical twisting power, leading to a change in the cholesteric pitch. The direction of this reorganization is correlated to the sign of the change in helical twisting power of the dopant. The rotational reorganization of the liquid crystalline film was used to rotate microscopic objects 4 orders of magnitude larger than the bistable dopants in the film, which shows that molecular motors and switches can perform work. The surface of the doped cholesteric liquid crystalline films was found to possess a regular surface relief, whose periodicity coincides with typical cholesteric polygonal line textures. These surface features originate from the cholesteric superstructure in the liquid crystalline film, which in turn is the result of the presence of the chiral dopant. As such, the presence of the dopant is expressed in these distinct surface structures. A possible mechanism at the origin of the rotational reorganization of liquid crystalline films and the cholesteric surface relief is discussed.     

Photoinduced optical anisotropy in films of photochromic liquid crystalline polymers

The light-induced modification of the optical properties of photochromic liquid crystalline (side-group) polymers (LCPs) containing azobenzene moieties was studied. Films of such polymers were irradiated with unpolarized and linearly polarized light. Unpolarized irradiation results in a modification of the order parameter, whereas the director orientation remains constant. The light-induced disturbance of the supramolecular order is strongly dependent on the structure of the polymer. A correlation with the enthalpic stability of the liquid crystalline phases is given. Linearly polarized irradiation causes a modification of the order parameter and a reorientation of the side-groups towards a direction perpendicular to the electric vector of the actinic light. This reorientation process is caused by an angular-dependent photoselection within the steady state of the photoisomerization of the azobenzene units. The amount and kinetic of the reorientation differ considerably as a function of certain structural features of the polymers, such as the content of photochromic moieties and the lengths of the spacer chains between the polymeric backbone and the rod-like moieties. It is shown that under certain circumstances the angular-dependent photoselection process may cause a reorientation of the non-photochromic moieties by a cooperative process. The result is a light-induced rotation of the optical axis of the LCP and thus an efficient modification of the birefringent and dichroic properties. This effect can be used in optical data storage.     

Solidification-induced and shear-induced band texture in thermotropic liquid crystalline polymer films

Two phase diagrams of a six-ring double-swallow-tailed compound are presented where the mixing components involve electron-acceptor compounds. In the mixed phase region, nematic, smectic A and C, cubic and columnar phases are induced. In this way transitions between lamellar, cubic and columnar phases can be realized by variation of the con- centration. The mesophases occurring in these systems have been characterized by X-ray investigations.     

Lyotropic liquid crystalline phases formed by phyosterol ethoxylates in room-temperature ionic liquids

The phase behaviors of four phytosterol ethoxylates surfactants (BPS-n, n = 5, 10, 20, and 30) with different oxyethylene units in room temperature ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim]BF₄), have been studied. The polarized optical microscopy and small-angle X-ray scattering techniques are used to characterize the phase structures of these binary systems at 25 °C. The structure and ordering of the liquid crystalline (LC) phases in such BPS-n/[Bmim]BF₄ systems are found to be influenced by BPS-n concentration and the temperature. Due to the bulky and rigid cholesterol group, the phytosterol ethoxylates surfactants exhibit different properties and interaction mechanism from the conventional C_nEO_m type nonionic surfactant systems. The rheological measurements indicate a highly viscoelastic nature of these lyotropic LC phases and disclose a lamellar phase characteristic with a rather strong rigidity at high surfactant concentrations. The control experiment with Brij 97(polyoxyethylene (10) oleyl ether)/[Bmim]BF₄ system and the FTIR measurements help to recognize that the solvophobic interaction combining with the hydrogen bonding are the main driving forces for the LC phases formation.     

Raman spectra of dipicolinic acid in crystalline and liquid environments

Raman spectra of dipicolinic acid (DPA) are important for detection of bacterial spores, since DPA and its salts present one of their major components. The implementation of a deeply cooled CCD camera in combination with pulsed excitation at 532 nm allowed measuring well-resolved Raman spectra of the DPA in different forms. Powder preparations, crystals grown from saturated solutions and aqueous solutions of the DPA were studied. The spectral features in different environments and comparison with the spectra obtained by other methods are discussed.     

Dynamics in dialysis process for liquid crystalline gel formation

The processes of gelation and liquid crystalline formation in the dialysis of Curdlan solution have been observed under crossed nicols, and the calcium concentration and pH of the inner solution were traced. The results showed that the gelation and the liquid crystalline formation occurred simultaneously to form liquid crystalline gel (LCG), but the birefringence of the LCG increased even after the gelation, suggesting further ordering of the Curdlan molecules. On the basis of the calcium ion diffusion, a simple theory for the time development of the thickness of the LCG layer was developed. The experimental and theoretical results agree very well until an amorphous gel (AG) ring appears. The whole process was expressed by a master curve by reducing time and distance data for different radius dialysis tubes by those at the final state; a scaling behavior with respect to the dialysis tube radius was found. The experimental analysis for the calcium concentrations and the pH indicates that forming Curdlan LCG with high ordering of Curdlan molecules consists of two steps: the diffusion of calcium ions inducing the ordering of Curdlan molecules and yielding cross-links simultaneously, and the local relaxation of the Curdlan molecules increasing the ordering degree further.     

Orientation and order in thin films of a combined liquid crystalline polymer

The order in thin films of a combined liquid crystalline polymer is studied by X-ray reflection. Films of thicknesses of less than 200 nm on float glass are investigated as a function of temperature. The polymer with mesogenic groups in the main and side-chains exhibits smectic and cholesteric mesophases. Measurements in the smectic phases show a Bragg peak and smectic layers are oriented parallel to the substrate. The sample is thus macroscopically ordered by the influence of substrate and free surface. The film surface is very smooth after spincoating; surface roughness is typically 0.8 nm. First annealing of samples leads to a significant roughening of the free surface; roughness increases to 2.1 nm. Order as a function of film thickness depends on the interaction of the polymer with the substrate and free surface. These interactions give rise to a typical correlation length of perturbations in smectic ordering.     

Blends of styrene/acrylic acid copolymers and acrylic polymers

The miscibility of a series of styrene/acrylic acid copolymers with various polyacrylate and polymethacrylate homopolymers, as well as a series of styrene/methyl methacrylate copolymers, has been investigated. According to the binary interaction model, the miscibility diagram for styrene/acrylic acid copolymers with styrene/methyl methacrylate copolymers indicates that acid and ester groups interact endothermically. The phase behavior of the homopolymers also implies this. The analysis ignores the association and self-association observed for the polymer blends and the low-molecular-weight analogs used to model them. The heat of mixing of low-molecular-weight analogs depended greatly on both composition and acid structure.     

Hexagonal liquid crystalline phases formed in ternary systems of Brij 97-water-ionic liquids

Phase diagrams of two ionic liquids: hydrophobic 1-butyl-3-methylimidazolium hexafluorophosphate (bmim-PF(6)) and relatively hydrophilic 1-butyl-3-methylimidazolium tetrafluoroborate (bmim-BF(4)) in aqueous solutions of Brij 97 were determined at 25 degrees C. Two hexagonal liquid crystalline phases formed in bmim-PF(6)- and bmim-BF(4)-containing ternary systems were investigated by means of small-angle X-ray scattering (SAXS) and rheological techniques, with comparison of composition and temperature effects. From analysis of the SAXS data, bmim-PF(6) is dominantly penetrated between the oxyethylene chains of surfactant molecules, whereas bmim-BF(4) is mainly located in the water layer of hexagonal phases. The strength of the network of hexagonal phase formed in the Brij 97/water/bmim-BF(4) system is appreciably stronger than that of the Brij 97/water/bmim-PF(6) system, indicated by the smaller area of the surfactant molecule at the interface and the higher moduli (G', G' '). Temperature has a converse effect on the lattice parameters of the two hexagonal phases.     

Patterned retarders prepared by photoisomerization and photopolymerization of liquid crystalline films

Isomerizable diacrylates derived from cinnamic acid are designed, synthesized and mixed with liquid crystalline diacrylates with the aim of making films with alternating birefringent and isotropic domains by applying the E-Z isomerization process at room temperature. The effects of the structure of the isomerizable-mesogenic group on the isotropization efficacy, the efficiency of the E-Z isomerization reaction, and film formation are discussed. Compounds derived from cyclohexyl cinnamate are proved to be good candidates that meet a whole set of parameters related to processing and application. These compounds exhibit a low nematic-to-isotropic transition temperature. In addition, they show no yellowing upon irradiation, unlike similar compounds derived from phenyl cinnamate. To elucidate the origin of isotropization of the film by irradiation, the pure Z-isomer is prepared by photolysis of the E-isomer and subsequent chromatographic separation of both isomers. Analysis of reference samples containing the pure isomers reveals that the decrease in transition temperature can be attributed exclusively to the E-Z photoisomerization process. Finally, thin films with alternating birefringent and isotropic parts of 100×100 µm² are obtained by using a combination of photoisomerization in air and photopolymerization in a nitrogen atmosphere, which is referred to as photo-patterning.     

Patterned retarders prepared by photoisomerization and photopolymerization of liquid crystalline films

Isomerizable diacrylates derived from cinnamic acid are designed, synthesized and mixed with liquid crystalline diacrylates with the aim of making films with alternating birefringent and isotropic domains by applying the E–Z isomerization process at room temperature. The effects of the structure of the isomerizable‐mesogenic group on the isotropization efficacy, the efficiency of the E–Z isomerization reaction, and film formation are discussed. Compounds derived from cyclohexyl cinnamate are proved to be good candidates that meet a whole set of parameters related to processing and application. These compounds exhibit a low nematic‐to‐isotropic transition temperature. In addition, they show no yellowing upon irradiation, unlike similar compounds derived from phenyl cinnamate. To elucidate the origin of isotropization of the film by irradiation, the pure Z‐isomer is prepared by photolysis of the E‐isomer and subsequent chromatographic separation of both isomers. Analysis of reference samples containing the pure isomers reveals that the decrease in transition temperature can be attributed exclusively to the E–Z photoisomerization process. Finally, thin films with alternating birefringent and isotropic parts of 100×100 µm² are obtained by using a combination of photoisomerization in air and photopolymerization in a nitrogen atmosphere, which is referred to as photo‐patterning.     

Optical rotatory dispersion from liquid crystalline solutions and films of hydroxypropylcellulose

The chiroptical properties of (hydroxypropyl)cellulose (HPC) in methanol are measured by optical rotatory dispersion (ORD), both in isotropic solution and in the cholesteric liquid crystalline phase. The ORD spectra of HPC films cast from lyotropic solution are also examined. Isotropic solutions of HPC in methanol provide no ORD evidence for the presence of a helical conformation, or for concentration-induced changes in conformation. The ORD curve of HPC in methanol, when expressed as specific rotation, is independent of polymer concentration for isotropic solutions containing between 1 and 43 per cent polymer by weight. From the slope of Drude plots, the Cotton effect responsible for the observed ORD curve occurs at 175-180 nm. However a 45 per cent liquid crystal-line solution exhibits plain positive dispersion, and the magnitude of the specific rotation is also much greater than that found for solutions containing less than 43 per cent polymer. Results for more concentrated solutions confirm that ORD spectra of lyotropic liquid crystals of HPC in methanol contain a significant positive component that is not accounted for by the de Vries equation for cholesteric reflection. ORD measurements in other solvents and on dry films show that this contribution to the optical activity vanishes when the solvent is removed or when hydrogen bonding is disrupted. The effect is tentatively ascribed to a hydrogen bonded structure that contributes strongly to the optical rotation.     

Orientation order and dynamics of CDCl3 in ethylcellulose/chloroform liquid crystal phases

Abstract

Deuterium quadrupole echo spectroscopy has been used to probe the orientational behaviour and dynamics of CDCl₃ molecules in ethylcellulose/chloroform chiral nematic phases. The ²H spectra of both left-handed and right-handed mesophases, formed by ethylcellulose with degrees of substitution of 2·3 and 3·0 respectively, were examined as functions of temperature and concentration. The observed quadrupolar splittings are relatively large and the magnitudes of the order parameters of the solvent molecules show little correlation with the handedness of the chiral phases. However, the ²H line shapes of these two types of chiral phase exhibit rather different temperature dependences. Spectral simulations show that the observed line shapes and their temperature variations are mainly determined by diffusion of CDCl₃ molecules along the pitch axis. The effects of centrifugation on the ²H spectra are also described.