Solvent volume-driven CuInAlS2 nanoflake counter electrode for effective electrocatalytic tri-iodide reduction in dye-sensitized solar cells

Journal of Solid State Electrochemistry - The influence of solvent volume on the properties of CuInAlS2 (CIAS) thin films deposited using simple and cost-effective nebulizer spray technique is...     

Performance of dye-sensitized solar cells with various carbon nanotube counter electrodes

Double-wall carbon nanotubes (DWCNTs), single-wall carbon nanotubes (SWCNTs), and multi-wall carbon nanotubes (MWCNTs) were investigated as an alternative for platinum in counter-electrodes for dye-sensitized solar cells. The counter-electrodes were prepared on fluorine-doped tin oxide glass substrates by the screen printing technique from pastes of carbon nanotubes and organic binder. The solar cells were assembled from carbon nanotubes counter-electrodes and screen printed anodes made from titanium dioxide. The cells produced with DWCNTs, SWCNTs or MWCNTs have overall conversion efficiencies of 8.0%, 7.6% and 7.1%, respectively. Electrochemical impedance spectroscopy measurements revealed that DWCNTs displayed the highest catalytic activity for the reduction of tri-iodide ions. The large surface area and superior chemical stability of the DWCNTs facilitated the electron-transfer kinetics at the interface between counter-electrode and electrolyte and yielded the lowest transfer resistance, thereby improving the photovoltaic activity. A short-term stability test at moderate conditions confirmed the robustness of solar cells based on the use of DWCNTs, SWCNTs or MWCNTs.

Multi-wall carbon nanotube counter electrodes for dye-sensitized solar cells prepared by electrophoretic deposition

In this study, electrophoretic deposition (EPD) was employed to fabricate multi-wall carbon nanotube (MWCNT) counter electrodes (CEs) for dye-sensitized solar cells (DSSCs). Firstly, raw MWCNTs were functionalized by means of an acid mixture solution and then subjected to EPD. The results obtained from Raman spectroscopy, Fourier transform infrared spectroscopy, field-emission scanning electron microscope, and cyclic voltammogram demonstrated that the defects and open ends on the MWCNTs can be obtained via chemical functionalization and thus facilitate the enhancement in the electrocatalytic activity for I₃⁻ reduction of MWCNT CEs. In addition to optimizing chemical functionalization of MWCNTs surface, the optimal thickness of MWCNT CEs prepared by EPD was also investigated. Additionally, consecutive cyclic voltammetric tests demonstrated that the MWCNT CE fabricated by EPD possessed excellent electrochemical stability. In comparison with MWCNT CEs fabricated by tape-casting approach, MWCNT CEs prepared by EPD presented a superior adhesion between MWCNT deposits and conducting glass substrates. Therefore, MWCNT CEs fabricated by EPD can be of great potential for use in low-cost plastic DSSCs.     

Low temperature fabrication of efficient porous carbon counter electrode for dye-sensitized solar cells

Porous carbon counter electrodes have been fabricated at low temperature by coating an organic binder free carbon slurry onto F-doped tin oxide conducting glass. The carbon slurry is prepared by ball-milling a dispersion of activated carbon in aqueous SnCl₄ solution. During ball-milling, SnCl₄ hydrolyzes and transforms into stannic acid gel, which acts as an inorganic “glue” to connect the carbon particles during film preparation. Dye-sensitized solar cells employing this carbon electrode achieve efficiency as high as 6.1% which is comparable to that of the cells using sputtering Pt as counter electrode.     

Fabrication of double-walled carbon nanotube counter electrodes for dye-sensitized solar sells

Double-walled carbon nanotubes (DWCNTs) have been studied for counter-electrode application in dye-sensitized solar cells (DSCs). Mesoporous TiO2 films are prepared from the commercial TiO2 nanopowders by screen-printing technique on optically transparent-conducting glasses. A metal-free organic dye (indoline dye D102) is used as a sensitizer. DWCNTs are applied to substitute for platinum as counter-electrode materials. Morphological and electrochemical properties of the formed counter electrodes are investigated by scanning electronic microscopy and electrochemical impedance spectroscopy, respectively. The electronic and ionic processes in platinum and DWCNT-based DSCs are analyzed and discussed. The catalytic activity and DSC performance of DWCNTs and Pt are compared. A conversion efficiency of 6.07% has been obtained for DWCNT counter-electrode DSCs. This efficiency is comparable to that of platinum counter-electrode-based devices.     

Low temperature fabrication of flexible carbon counter electrode on ITO-PEN for dye-sensitized solar cells

<正>A novel low temperature method was used to prepare the mesoporous carbon(MC) counter electrode(CE) on indium-doped tin oxide coated polyethylene naphthalate(ITO-PEN) for flexible dye-sensitized solar cells(DSSCs).The obtained flexible MC CEs with carbon loading of 280μg cm~(-2) were characterized by SEM,XRD and electrochemical impedance.The light-to-electricity conversion efficiency of the DSSC fabricated with the prepared flexible MC CE was 86%of that of DSSC based on the decomposited Pt CE.     

Inverse opal carbons for counter electrode of dye-sensitized solar cells

We investigated the fabrication of inverse opal carbon counter electrodes using a colloidal templating method for DSSCs. Specifically, bare inverse opal carbon, mesopore-incoporated inverse opal carbon, and graphitized inverse opal carbon were synthesized and stably dispersed in ethanol solution for spray coating on a FTO substrate. The thickness of the electrode was controlled by the number of coatings, and the average relative thickness was evaluated by measuring the transmittance spectrum. The effect of the counter electrode thickness on the photovoltaic performance of the DSSCs was investigated and analyzed by interfacial charge transfer resistance (R(CT)) under EIS measurement. The effect of the surface area and conductivity of the inverse opal was also investigated by considering the increase in surface area due to the mesopore in the inverse opal carbon and conductivity by graphitization of the carbon matrix. The results showed that the FF and thereby the efficiency of DSSCs were increased as the electrode thickness increased. Consequently, the larger FF and thereby the greater efficiency of the DSSCs were achieved for mIOC and gIOC compared to IOC, which was attributed to the lower R(CT). Finally, compared to a conventional Pt counter electrode, the inverse opal-based carbon showed a comparable efficiency upon application to DSSCs.     

Nickel phosphide-embedded graphene as counter electrode for dye-sensitized solar cells

Nickel phosphide-embedded graphene, prepared by the hydrothermal reaction of red phosphorus, nickel chloride, and graphene oxide in a mixture of ethylene glycol-water, is investigated as the counter electrode of DSSCs. It is demonstrated that the DSSC with the nickel phosphide-embedded graphene as the new counter electrode presents an excellent performance competing with that of the Pt electrode.     

Novel coal-based carbon/CNTs composite counter electrode for highly efficient ZnO-based dye-sensitized solar cells

Journal of Solid State Electrochemistry - An interesting subject of non-fuel utilization of coal is the synthesis of high-performance coal-based carbon (CBC) materials to replace expensive Pt...     

Copper doped manganese dioxide as counter electrode for dye-sensitized solar cells

Many materials have been tried as the counter electrode (CE) material as a substitute to the noble metal Pt in dye-sensitized solar cells (DSSCs). The CE property is critical to the operation of a DSSC as it catalyzes the reduction of I₃^- ions and retrieves the electrons from the photoanode. Here we have explored the application of manganese dioxide (MnO₂) and copper-doped manganese dioxide (Cu-MnO₂) nanoparticles as CE candidates for DSSCs mainly as low-cost alternatives to Pt. A simple hydrothermal method was followed to synthesize α-MnO2 and Cu-MnO2 nanoparticles at a temperature of 140 °C for 14 h. The nanoparticles were characterized to prove its electrocatalytic abilities for DSSCs. DSSC devices fabricated with 10 wt% Cu-MnO₂ as CE showed the best V_OC of 781 mV, I_SC of 3.69 mA/cm², FF of 0.50, and %PCE of 1.7 whereas Pt as CE showed V_OC of 780 mV, I_SC of 14.8 mA/cm², FF of 0.43, and %PCE of 5.83 under 0.85 Sun. The low-cost feature of using Cu-MnO₂ is encouraging to further study the factors that can improve the efficiency of DSSCs with alternative CEs to conventional Pt electrodes.     

Polypyrrole-cobalt-carbon nanocomposites as efficient counter electrode materials for dye-sensitized solar cells

In this work, we demonstrate a new kind of Pt-free counter electrode for dye-sensitized solar cells(DSCs). Polypyrrole-cobalt-carbon(PPY-Co-C) nanocomposites, with the advantages of low cost and simple preparation, show favorable catalytic activity in promoting tri-iodide reduction. The DSC composed of the PPY-Co-C nanocomposite electrode exhibits an acceptable energy conversion efficiency of 6.01%, a considerable short-circuit photocurrent of 15.33 mA cm-2, and a low charge-transfer resistance of 1.5 Ω cm2. The overall performance of PPY-Co-C is superior to the carbon counterparts and comparable with the platinum reference, rendering them efficient and promising counter electrode materials for DSCs.     

Highly ordered mesoporous carbon arrays from natural wood materials as counter electrode for dye-sensitized solar cells

Highly ordered mesoporous carbon arrays are prepared by a facile carbonization of the natural bamboo and oak wood in argon atmosphere. The as-prepared oak mesoporous carbon arrays have good electrocatalytic activity and high conductivity, based on their well connected framework, highly ordered microtexture, wider mesopores and larger surface area. Consequentially, the photovoltaic performance of the DSSC with the oak mesoporous carbon array film as counter electrode is excellent and comparable to that of the DSSC with FTO/Pt counter electrode. In addition, it is a simple method for a mass production of mesoporous carbon arrays with natural wood materials.     

Transferred vertically aligned N-doped carbon nanotube arrays: use in dye-sensitized solar cells as counter electrodes

We prepared vertically aligned nitrogen doped carbon nanotubes (CNTs) on a rigid glass substrate or flexible plastic substrate via a 'growth-detachment-transfer' process and the vertically aligned N-doped CNT arrays are employed as counter electrodes for novel dye-sensitized solar cells.     

Synthesis of various carbon incorporated flower-like MoS2 microspheres as counter electrode for dye-sensitized solar cells

Journal of Solid State Electrochemistry - A flower-like molybdenum disulfide microspheres and various carbon materials (acetylene black, vulcan carbon, multi-walled carbon nanotubes, carbon...     

Novel counter electrode catalysts of niobium oxides supersede Pt for dye-sensitized solar cells

Synthesized niobium oxides (Nb(2)O(5) and NbO(2)) were applied for the first time as counter electrodes (CEs) in dye-sensitized solar cells (DSCs). The DSC using NbO(2) CE showed a higher power conversion efficiency of 7.88%, compared with that of the DSC using Pt CE (7.65%).     

Organic redox couples and organic counter electrode for efficient organic dye-sensitized solar cells

A series of organic thiolate/disulfide redox couples have been synthesized and have been studied systematically in dye-sensitized solar cells (DSCs) on the basis of an organic dye (TH305). Photophysical, photoelectrochemical, and photovoltaic measurements were performed in order to get insights into the effects of different redox couples on the performance of DSCs. The polymeric, organic poly(3,4-ethylenedioxythiophene) (PEDOT) material has also been introduced as counter electrode in this kind of noniodine-containing DSCs showing a promising conversion efficiency of 6.0% under AM 1.5G, 100 mW·cm(-2) light illumination. Detailed studies using electrochemical impedance spectroscopy and linear-sweep voltammetry reveal that the reduction of disulfide species is more efficient on the PEDOT counter electrode surface than on the commonly used platinized conducting glass electrode. Both pure and solvated ionic-liquid electrolytes based on a thiolate anion have been studied in the DSCs. The pure and solvated ionic-liquid-based electrolytes containing an organic redox couple render efficiencies of 3.4% and 1.2% under 10 mW·cm(-2) light illumination, respectively.     

Pyrolytic carbon from an aromatic precursor and its application as a counter electrode in dye-sensitized solar cells

Pyrolytic carbon thin films were deposited on quartz plates through a chemical vapor deposition process, by using a biphenyl precursor, 4,4'-bis(chloromethyl-1,1'-biphenyl). The pyrolytic carbons were microporous and catalytic toward reduction of tri-iodide, and the films thus obtained possessed a metallic appearance with good mirror reflections, hydrophilic surfaces, and low sheet resistances. The pyrolytic carbon-coated quartz plates were used, in place of the commonly used Pt-coated fluorine-doped tin oxide glass, as the counter electrode for dye-sensitized solar cells (DSSCs). The light to electricity conversion efficiency of the cell thus obtained was reasonably high, achieving 78% of that obtained by using the conventional but much more expensive Pt counter electrode. From the electrochemical impedance spectroscopic analysis, one found that the minor reduction in the conversion efficiency came from the relatively higher resistance and lower catalytic activity of the pyrolytic carbon. This work demonstrates that the newly developed pyrolytic carbon films may be a promising alternative to Pt as the counter electrode material for DSSCs.     

Quasi-solid-state dye-sensitized solar cells assembled with polymeric ionic liquid and poly(3,4-ethylenedioxythiophene) counter electrode

Poly(3,4-ethylenedioxythiophene) nanofibers (PEDOT-NF) with high catalytic activity were synthesized and employed as a counter electrode in dye-sensitized solar cells (DSSCs). A polymeric ionic liquid (PIL) was used as a gelling agent and an iodide source for making a highly conductive gel polymer electrolyte. A quasi-solid-state DSSC assembled with this PIL-based gel polymer electrolyte and PEDOT-NF counter electrode exhibited high conversion efficiency of 8.12% at 100 mW cm^− 2.