Synthesis of Au–ZnS hybrid nanostructures and their application for electrochemical biosensor

Au–ZnS core–shell nanostructures were grown onto the transparent indium tin oxide (ITO) thin film-coated glass surface by successive electrodeposition of Au and ZnS in cyclic voltammetry. The resulting hybrid nanostructures were characterized using scanning electron microscopy, X-ray diffraction, UV–vis spectroscopy, and electrochemical impedance spectroscopy. The glucose oxidase (GOD) was immobilized onto the surface of the Au–ZnS hybrid nanostructures in silica sol–gel network. Furthermore, the Au–ZnS nanostructures demonstrate an enhanced direct electron transfer between GOD and the electrode due to their unique chemical and electrocatalytic properties and their synergy effect. The analytical performance of the GOD-based electrode was improved greatly compared with that of ITO substrate modified by Au or ZnS nanostructures alone. The proposed enzyme electrode based on Au–ZnS hybrid nanomaterials displays high sensitivity and wide linear range in the determination of glucose. The Au–ZnS hybrid nanostructures have potential for “green chemistry” application in the fabrication of enzyme-based electrochemical biosensors.     

Nanogold–polyaniline–nanogold microspheres-functionalized molecular tags for sensitive electrochemical immunoassay of thyroid-stimulating hormone

Methods based on nanomaterial labels have been developed for electrochemical immunosensors and immunoassays, but most involved low sensitivity. Herein a novel class of molecular tags, nanogold–polyaniline–nanogold microspheres (GPGs), was first synthesized and functionalized with horseradish peroxidase-conjugated thyroid-stimulating hormone antibody (HRP-Ab₂) for sensitive electrochemical immunoassay of thyroid-stimulating hormone (TSH). X-ray diffraction, confocal Raman spectroscopy, scanning electron microscope and transmission electron microscope were employed to characterize the prepared GPGs. Based on a sandwich-type immunoassay format, the assay was performed in pH 5.0 acetate buffer containing 6.0 mmol L⁻¹ H₂O₂ by using GPG-labeled HRP-Ab₂ as molecular tags. Compared with pure polyaniline nanospheres and gold nanoparticles alone, the GPG hybrid nanostructures increased the surface area of the nanomaterials, and enhanced the immobilized amount of HRP-Ab₂. Several labeling protocols comprising HRP-Ab₂, nanogold particle-labeled HRP-Ab₂, and polyaniline nanospheres-labeled HRP-Ab₂, were also investigated for determination of TSH and improved analytical features were obtained by using the GPG-labeled HRP-Ab₂. With the GPG labeling method, the effects of incubation time and pH of acetate buffer on the current responses of the immunosensors were also studied. The strong attachment of HRP-Ab₂ to the GPGs resulted in a good repeatability and intermediate precision down to 7%. The dynamic concentration range spanned from 0.01 to 20 μIU mL⁻¹ with a detection limit (LOD) of 0.005 μIU mL⁻¹ TSH at the 3s_B criterion. Significantly, no significant differences at the 0.05 significance level were encountered in the analysis of 15 spiking serum samples between the developed electrochemical immunoassay and the commercially available enzyme-linked immunosorbent assay (ELISA) method for determination of TSH.     

A ratiometric electrochemical biosensor for sensitive detection of Hg based on thymine–Hg–thymine structure

In this paper, a simple, selective and reusable electrochemical biosensor for the sensitive detection of mercury ions (Hg²⁺) has been developed based on thymine (T)-rich stem–loop (hairpin) DNA probe and a dual-signaling electrochemical ratiometric strategy. The assay strategy includes both “signal-on” and “signal-off” elements. The thiolated methylene blue (MB)-modified T-rich hairpin DNA capture probe (MB-P) firstly self-assembled on the gold electrode surface via Au–S bond. In the presence of Hg²⁺, the ferrocene (Fc)-labeled T-rich DNA probe (Fc-P) hybridized with MB-P via the Hg²⁺-mediated coordination of T–Hg²⁺–T base pairs. As a result, the hairpin MB-P was opened, the MB tags were away from the gold electrode surface and the Fc tags closed to the gold electrode surface. These conformation changes led to the decrease of the oxidation peak current of MB (I_MB), accompanied with the increase of that of Fc (I_Fc). The logarithmic value of I_Fc/I_MB is linear with the logarithm of Hg²⁺ concentration in the range from 0.5 nM to 5000 nM, and the detection limit of 0.08 nM is much lower than 10 nM (the US Environmental Protection Agency (EPA) limit of Hg²⁺ in drinking water). What is more, the developed DNA-based electrochemical biosensor could be regenerated by adding cysteine and Mg²⁺. This strategy provides a simple and rapid approach for the detection of Hg²⁺, and has promising application in the detection of Hg²⁺ in real environmental samples.     

Electrochemical detection of benzo(a)pyrene and related DNA damage using DNA/hemin/nafion–graphene biosensor

A novel electrochemical biosensor, DNA/hemin/nafion–graphene/GCE, was constructed for the analysis of the benzo(a)pyrene PAH, which can produce DNA damage induced by a benzo(a)pyrene (BaP) enzyme-catalytic product. This biosensor was assembled layer-by-layer, and was characterized with the use of cyclic voltammetry, electrochemical impedance spectroscopy (EIS) and atomic force microscopy. Ultimately, it was demonstrated that the hemin/nafion–graphene/GCE was a viable platform for the immobilization of DNA. This DNA biosensor was treated separately in benzo(a)pyrene, hydrogen peroxide (H₂O₂) and in their mixture, respectively, and differential pulse voltammetry (DPV) analysis showed that an oxidation peak was apparent after the electrode was immersed in H₂O₂. Such experiments indicated that in the presence of H₂O₂, hemin could mimic cytochrome P450 to metabolize benzo(a)pyrene, and a voltammogram of its metabolite was recorded. The DNA damage induced by this metabolite was also detected by electrochemical impedance and ultraviolet spectroscopy. Finally, a novel, indirect DPV analytical method for BaP in aqueous solution was developed based on the linear metabolite versus BaP concentration plot; this method provided a new, indirect, quantitative estimate of DNA damage.     

A new method for the synthesis of organic–polyoxometallate hybrid compounds

The reaction of the Na₂MoO₄ or Na₂WO₄ salt with organic amine and PCl₅, SiCl₄ or TiCl₄ in hydrochloric acid medium under hydrothermal conditions yields organic–polyoxometallate hybrid compounds, with the following reaction formula: Na₂MO₄ + Lewis-base + XCl_n + HCl → (Lewis-baseH)_m(XM₁₂O₄₀) + NaCl + H₂O (M = Mo or W; X = P, Si, Ti,; n = 3–5). By using this method, four new complexes, [(CH₃)₂NH]₃[H₃PW₁₂O₄₀] (1), (C₂H₅OH)₃(H₃PMo₁₂O₄₀) (2), [DMDA]₂[H₄SiW₁₂O₄₀]·H₂O (3) (DMDA = 1 N,3 N-dimethyl-1,3-diazolidine) and [(DAN)₆][H₄TiW₁₂O₄₀]·4H₂O (DAN = 4,4′-dianiline) (4), were obtained, and their crystal structures are reported. Thermal analysis of 1, 2 and 4 has been carried out. The thermal analysis indicates that the Keggin anion skeleton begins to decompose at about 300 °C. The possibility of constructing hydrogen-bond interactions by association between the polyoxometallate and the organic compound is explored. The roles of solvents and organic groups in the formation of specific crystalline architectures are discussed. The crystal structure of [H₄TiW₁₂O₄₀], a hetero-transition-metal Keggin polyoxometallate with a square-plane TiO₄, has been reported. Four architectures developed by hydrogen-bond associations of different Keggin polyoxometallates and organic bearing N–H or O–H donor functions are described. The selected organic modules (4,4′-dianiline, 1,3-dimethylimidazolidine, dimethylamine and ethanol) possess hydrogen-donor functions to allow them to act as bridges between polyoxometallate groups. Depending on the nature of the donor group, the number of hydrogens available for bonding, the geometric features and the sizes of the organic modules, diverse assembling patterns have been observed ranging from one-dimensional to three-dimensional networks. For all the networks, H₃O⁺ and H⁺ act as actual linkers between the molecular units.     

A facile synthesis of hydrophilic poly(ε-caprolactone)-based poly(ether-ester-amide)s

Segmented poly(ether-ester-amide)s, (PEEA)s, of controlled hydrophilicity degree, based on poly(ε-caprolactone) (PCL), were synthesized according to a facile two-step procedure using α,ω-dihydroxy oligomeric PCL, 4,7,10-trioxa-1,13-tridecanediamine and macromers prepared from poly(ethylene glycol)s and adipoyl chloride. The PEEAs showed M _n values in the range 5–11.5 kDa. A PCL-type crystallinity was found by WAXS. DSC indicated T_m values (49–51 °C) close to that of PCL macromer. Single glass transitions were observed both by DSC and DMTA techniques and the T_g values (−58–−50 °C by DSC) were slightly higher than that of PCL. The water uptake was in the range 4.8–26.0 wt.-% depending on the length of the poly(ethylene glycol) segment.

Monomers used to prepare the PEEAs.     

Electrochemical synthesis of π-cyclopentadienyl(nitrosyl)nickel complexes

The dependence of the yield of -cyclopentadienyl(nitrosyl)nickel on the conditions of its electrochemical synthesis from cyclopentadiene under an atmosphere of nitric oxide has been studied with the use of a nickel anode. The general character of the reaction has been demonstrated by its extention to monosubstituted ethyl-, isopropyl-, and benzoylcyclopentadienes.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1123–1124, June, 1994.     

Electroactive electrospun polyaniline/poly[(L-lactide)-co-(ε-caprolactone)] fibers for control of neural cell function

Blends of PAni and PLCL are electrospun to prepare uniform fibers for the development of electrically conductive, engineered nerve grafts. PC12 cell viability is significantly higher on RPACL fibers than on PLCL-only fibers, and the electrical conductivity of the fibers affects the differentiation of PC12 cells; the number of cells positively-stained and their expression level are significantly higher on RPACL fibers. PC12 cell bodies display an oriented morphology with outgrowing neurites. On RPACL fibers, the expression level of paxillin, cdc-42, and rac is positively affected and proteins including RhoA and ERK exist as more activated state. These results suggest that electroactive fibers may hold promise as a guidance scaffold for neuronal tissue engineering.     

Recent progress of poly (N-isopropylacrylamide) hybrid hydrogels: synthesis,fundamentals and applications – review

Hydrogels, having nanomaterials (e.g. nanoparticles and nanorods) incorporated inside their polymeric meshes, are generally called hybrid gels/hydrogels. These assemblies combine the properties of both hydrogels and nanomaterials in one system. These responsive hybrid hydrogels, particularly polymerized N-isopropylacrylamide (PoNip) polymeric gels, have been extensively exploited for various multi-disciplinary applications in the literature over the past two decades because of their unique and exquisite particulars. Next generation assemblies have been prepared by using the smart nature of these gels toward the general incentives (e.g. temperature, ionic strength, and pH) in the fields of nanocatalysis, water purification, drug delivery, photonics, and optics. This review presents an overview of the PoNip hybrid assemblies engineered over the past 7 years i.e. 2010–2016 and extensively discusses the interaction of the incorporated nanomaterial with the polymeric chains of the hydrogels as it is the most significant factor which makes these assemblies attractive for all the associated applications. Moreover, this article also describes the preparative routes, properties, classification, and applications of these hybrid hydrogels in the fields of medicine, environment, catalysis, and nanotechnology.     

Ionic liquid–graphene hybrid nanosheets-based electrochemical sensor for sensitive detection of methyl parathion

In this work, ionic liquid–graphene nanosheets (IL–GNs) were synthesised and used as an enhanced material for sensitive detection of methyl parathion (MP) by electrochemical method. IL–GNs were characterised by UV–Vis spectroscopy, transmission electron microscopy (TEM), X-ray photo-electron spectroscopy (XPS), Fourier transform Infrared (FT-IR) spectroscopy and Raman spectroscopy, which confirmed that IL was successfully covered on the surface of GNs. Significantly, due to the coupling of excellent properties of GNs and IL, the IL–GNs-modified glassy carbon electrode (IL–GNs/GCE) showed higher signals for MP response than the GNs/GCE and bare GCE. At the IL–GNs/GCE, the peak currents increase linearly with the concentration of MP in the range of 5.3 ng/mL to 2.6 μg/mL with the detection limit of 1.1 ng/mL, which was better than other enzyme-based and enzymeless sensors. The IL–GNs-based electrochemical sensor was also successfully demonstrated for the detection of water sample with satisfactory results. Furthermore, the proposed electrochemical sensor exhibited satisfied stability and reproducibility. The simple sensing platform can be extended to detect other organophosphate pesticide.     

Enzymatic synthesis of poly(α-ethyl β-aspartate) by poly(ethylene glycol) modified poly(aspartate) hydrolase-1

We recently discovered that poly(aspartate) (PAA) hydrolase‐1 from Pedobacter sp. KP‐2 has a unique property of specifically cleaving the amide bond between β‐aspartate units in thermally synthesized PAA (tPAA). In the present study, the enzymatic synthesis of poly(α‐ethyl β‐aspartate) (β‐PAA) was performed by taking advantage of the substrate specificity of PAA hydrolase‐1. No polymerization of diethyl L ‐aspartate by native PAA hydrolase‐1 occurred because of the low dispersibility of the enzyme in organic solvent. Poly(ethylene glycol) (PEG) modification of the enzyme improved its dispersibility and enabled it to polymerize the monomer substrate. MALDI‐TOF MS analysis showed that the synthesized polymer was observed in the range of m/z = 750–2 500. This analysis also revealed that the polymer was composed of ethyl aspartate units, containing either an ethyl ester or a free carboxyl end group at its carboxyl terminus. ¹H NMR analysis demonstrated that the synthesized polymer consisted of only β‐amide linkages. Thus, the present results indicate that PAA hydrolase‐1 modified with PEG is useful for the synthesis of β‐PAA due to its unique substrate specificity and good dispersibility in organic solvent.

     

Electrochemical synthesis of copper nanoparticles on nafion–graphene nanoribbons and its application for the synthesis of diaryl ethers

Electrochemical synthesis of copper nanoparticles on nafion–graphene nanoribbons support for the synthesis of diaryl ethers via Ullmann type coupling is reported. The catalyst showed excellent performance for C–O cross coupling reactions under ligand free condition. The catalyst was characterized by various techniques such as SEM, TEM, XRD, EDX, BET, TGA, and UV spectrophotometry. It was recycled several times without significant loss in its catalytic activity.     

Electrochemical characteristics of poly(ophenylendiamine) film electrodes in phosphatic solution

The electrochemical characteristics of poly(o-phenylendiamine) (POPD) film modified electrodes have been investigated using different electrochemical techniques.The main interest is focused on the effect of potential and film thickness on the electrode process.Good agreement has been found for the apparent diffusion coefficient estimated by chronocoulometry and impedance spec-troscopy.The charge transfer process within POPD films is diffusion processes at negative and positive overpotentials and electron hopping mechanism at formal potential.The POPD film conductivity of the oxidized state is better than that of the reduced state.For all electrode processes,the H+ may penetrate the film/electrolyte interface and take part in charge transfer or protonation-deprotonation of phenazine rings.     

Synthesis and characterization of emulsifier-free trilayer core–shell polysilsesquioxane/polyacrylate/poly(fluorinated acrylate) hybrid latex particles

The trilayer core–shell polysilsesquioxane/polyacrylate/poly(fluorinated acrylate) (PSQ/PA/PFA) hybrid latex particles are successfully prepared, using functional PSQ latex particles with reactive methacryloxypropyl groups synthesized by the hydrolysis and polycondensation of (3-methacryloxypropyl)trimethoxysilane in the presence of a reactive emulsifier as seeds. Transmission electron microscopy (TEM), scanning electron microscopy (SEM) and dynamic light scattering (DLS) confirm that the resultant hybrid latex particles have evident trilayer core–shell structure and a narrow size distribution. The Fourier transform infrared (FTIR) spectra show that fluorinated acrylate monomers are effectively involved in the emulsion copolymerization and formed the fluorine-containing hybrid latex particles. XPS analysis of the obtained hybrid latex film reveals that the intensity of fluorine signal in the film–air interface is higher than that in the film–glass interface. In addition, compared with pure polyacrylate latex film, the obtained fluorine-containing hybrid film shows higher hydrophobicity and thermal stability, and lower surface free energy.     

Electrochemical biosensor for simultaneous determination of guanine and adenine based on dopamine-melanin colloidal nanospheres–graphene composites

Dopamine-melanin colloidal nanospheres (Dpa-melanin CNDs)–graphene composites-modified glassy carbon electrode (GCE) was prepared by a simple procedure and then successfully used to simultaneously determine guanine and adenine. Scanning electron microscopy (SEM) images and transmission electron microscopy (TEM) were used to characterize the morphology of the Dpa-melanin CNSs–graphene composite. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to characterize the electrode modifying process. Differential pulse voltammetry (DPV) was used to study the electrocatalytic activity toward the electrochemical oxidation of guanine and adenine. The modified electrode exhibited enhanced electrocatalytic behavior and good stability for the simultaneous determination of guanine and adenine compared with bare GCE. The electrochemical biosensor exhibited wide linear range of 0.5 to 150 μM with detection limit of 0.05 and 0.03 μM for guanine and adenine detection (S/N?=?3), respectively. Furthermore, the biosensor showed high sensitivity, good selectivity, good reproducibility, and long-term stability to guanine and adenine detection. At the same time, the fabricated electrode was successfully applied for the determination of guanine and adenine in denatured DNA samples with satisfying results. These results demonstrated that Dpa-melanin CNSs–graphene composite was a promising substrate for the development of high-performance electrochemical biosensor.     

Electrochemical preparation of composite of poly brilliant cresyl blue (PBCB)–poly 5-amino-2-napthalenesulfonic acid electrode and electrocatalytic application

Poly brilliant cresyl blue (PBCB) and poly 5-amino-2-napthalenesulfonic (PANS) polymer composite modified electrode was fabricated by the electrochemical polymerization of brilliant cresyl blue and 5-amino-2-napthalenesulfonic acid. When compared polymer composite electrodes with PBCB and PANS electrode, it showed enhanced electrochemical property. The morphology of the resulting composite electrode was characterized by AFM, and the electrochemical properties of the modified electrode were characterized by cyclic voltammetry and amperometry. The composite electrode showed surface-confined and pH-dependent electrochemical property. The composite electrode exhibited high catalytic behavior toward the reduction of hydrogen peroxide at low overpotential. The detection limit and sensitivity of the electrode toward H₂O₂ detection was 5 μM and 1 μA/mM, respectively, and response time was less than 10 s for hydrogen peroxide.     

One-step electrosynthesis of poly(3,4-ethylenedioxy-thiophene)–ethylsulfate matrix for fabricating vitamin C electrochemical biosensor and its determination in commercial juices

A stable and specific electrochemical biosensor based on a poly(3,4-ethylenedioxythiophene)–ethyl sulfate (PEDOT–EtSO₄) matrix with high conductivity and stability was easily fabricated. 1-Ethyl-3-methylimidazolium ethyl sulfate ([Emim][EtSO₄]), a halogen-free and relatively hydrolysis-stable hydrophilic ionic liquid, was selected as the supporting electrolyte for the one-step electrosynthesis of the PEDOT–EtSO₄ matrix under the optimum conditions. The PEDOT–EtSO₄ matrix electrosynthesized in the [Emim][EtSO₄] aqueous solution displayed high conductivity and stability. Inspired by preceding studies, the electrochemical biosensor based on the resulting PEDOT–EtSO₄ matrix was facilely developed to determine the vitamin C (VC) level in commercial juices. Ascorbate oxidase (AO) was dip-coated on the surface of the as-prepared matrix, then Nafion was covered on the surface of AO layers for preventing the leakage of enzyme molecules. The fabricated biosensor displayed an excellent bioelectrocatalytic activity to the oxidation of VC. Under optimal conditions, the fabricated amperometric biosensor showed rapid response (less than 2?s) to VC at a low potential of 0.2?V over a wide range of concentrations from 8.0?×?10^?7 to 1?×?10^?3?M with a high sensitivity of 104.8?mA?M^?1?cm^?2, and the limit of detection and the limit of quantification of presented method was 0.147?μM and 0.487?μM, respectively. Moreover, the bioaffinity, specificity, stability, and reproducibility of the biosensor were also evaluated. Finally, the biosensor was employed to determine the content of VC in commercial juice samples by amperometric and voltammetric methods. The satisfactory results indicated that the as-prepared conducting PEDOT–EtSO₄ films as immobilization matrix of biologically active species could be a promising candidate for the design and application of biosensors.     

Controlling the properties of poly(amino ester urethane)–poly(ethylene glycol)–poly(amino ester urethane) triblock copolymer pH/temperature-sensitive hydrogel

A series of triblock copolymers composed of poly(ethylene glycol) (PEG) and poly(β-amino ester urethane) (PAEU) was synthesized and characterized. Its aqueous solution can be used as a non-cytotoxic, biodegradable, and pH/temperature-sensitive hydrogel system. The copolymer solutions exhibited sol-to-gel and gel-to-sol transitions with increasing pH and temperature, respectively. The properties of this hydrogel system, such as its sol–gel transition diagram, mechanical properties, and degradation rate, can be controlled by modulating the PEG molecular weight, PAEU block length, copolymer concentration, or structure of the monomers. The presence of urethane groups and ionized tertiary amine groups in the copolymer solution at lightly acidic pH may lead to a strong interaction of the copolymer with formulated bioactive therapeutic agents, while the existence of the gel state under physiological conditions (37 °C, pH 7.4) may enable this copolymer hydrogel to be applicable as a drug/protein carrier.