Electrochemical DNA biosensor for the detection of short DNA species of Chronic Myelogenous Leukemia by using methylene blue

A novel assay for the voltammetric detection of 18-bases DNA sequences relating to Chronic Myelogenous Leukemia (CML, Type b3a2) using methylene blue (MB) as the hybridization indicator was reported. DNA was covalently attached onto a glassy carbon electrode (GCE) through amines of the DNA bases using N-hydroxysulfosuccinimide (NHS) and N-(3-dimethylamion)propyl-N′-ethyl carbodiimidehydrochloride (EDC). The covalently immobilized single-stranded DNA (ssDNA) could selectively hybridize with its complementary DNA (cDNA) in solution to form double-stranded DNA (dsDNA) on the surface. A significant increase of the peak current for methylene blue upon the hybridization of immobilized ssDNA with cDNA in the solution was observed. This peak current change was used to monitor the recognition of CML DNA sequence. This electrochemical approach is sequence specific as indicated by the control experiments in which no peak current change was observed if a non-complementary DNA sequence was used. Factors, such as DNA target concentration and hybridization conditions determining the sensitivity of the electrochemical assay were investigated. Under optimal conditions, this sensor has a good calibration range between 1.25 × 10⁻⁷ and 6.75 × 10⁻⁷ M, with CML DNA sequence detection limit of 5.9 × 10⁻⁸ M.     

Electrochemical biosensor for detection of BCR/ABL fusion gene based on hairpin locked nucleic acids probe

This communication reports on a novel biosensor to study the hybridization specificity by using thiolated hairpin locked nucleic acids (LNA) as the capture probe. The LNA probe was immobilized on the gold electrode through sulfur–Au interaction and could selectively hybridize with its target DNA. Differential pulse voltammetry (DPV) was used to monitor the hybridization reaction on the probe electrode. The decrease of the peak current of methylene blue, an electroactive indicator, was observed upon hybridization of the probe with the target DNA. The results indicated this new method has excellent specificity for single-base mismatch and complementary after hybridization, and a high sensitivity. This LNA probe has been used for assay of fusion gene in Chronic Myelogenous Leukemia (CML) of the real sample with satisfactory result.     

Electrochemical DNA biosensor for the detection of Listeria Monocytogenes using toluidine blue as a hybridization indicator

An electrochemical DNA biosensor was established for the determination of actin-assembly inducing protein (actA) gene sequences from Listeria monocytogenes and its polymerase chain reaction (PCR) product. The actA gene probe sequences were covalently immobilized on the surface of the mercaptoacetic acid self-assembled gold electrode with the help of N-(3-dimethylaminopropyl)-N′-ethylcarbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS), which was further used to hybridize with the target sequence. Toluidine blue (TB) was used as an effective electrochemical indicator for the discrimination of the hybridization reaction on the electrode surface, which had stronger interaction with double-stranded DNA (dsDNA) than single-stranded DNA (ssDNA). The electrochemical parameters of TB on DNA modified electrodes were carefully calculated. Based on the different electrochemical responses of TB on DNA modified electrodes, the actA gene sequences can be detected in the concentration range from 1.0 × 10^-7 to 8.0 × 10^-5 M. The PCR product of Listeria monocytogenes was successfully detected by the proposed electrochemical biosensor.     

Hybridization biosensor using 2,9-dimethyl-1,10-phenantroline cobalt as electrochemical indicator for detection of hepatitis B virus DNA

A label-free biosensor for the detection of oligonucleotides related to hepatitis B virus sequence via the interactions of DNA with redox-active complex, 2,9-dimethyl-1,10-phenantroline cobalt [Co(dmp)(H2O)(NO3)2] is described. The study was carried out by the hybridization of 21-mer probe DNA modified on glassy carbon electrode (GCE) with target DNA, and [Co(dmp)(H2O)(NO3)2] whose sizes are comparable to those of the small groove of native double-helix DNA was used as an electrochemical indicator. Electrochemical detection was performed by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) over the potential range where the [Co(dmp)(H2O)(NO3)2] was active. Under the optimum conditions, the electrical signal had a linear relationship with the concentration of target DNA ranging from 3.96 x 10(-7) to 1.32 x 10(-6) M, and the detection limit was 1.94 x 10(-8) M (S/N=3). The biosensor has good selectivity by detecting the three-base mismatch sequence ssDNA.     

An ultrasensitive electrochemical biosensor for detection of DNA species related to oral cancer based on nuclease-assisted target recycling and amplification of DNAzyme

A simple, label-free, ultra-highly sensitive and selective electrochemical sensor based on nuclease-assisted target recycling and DNAzyme for the detection of DNA species related to oral cancer in saliva is developed.     

Electrochemical biosensor based on nanogold-modified poly-eriochrome black T film for BCR/ABL fusion gene assay by using hairpin LNA probe

A novel electrochemical biosensor is described for detection of breakpoint cluster region gene and a cellular abl (BCR/ABL) fusion gene in chronic myelogenous leukemia (CML) by using thiolated-hairpin locked nucleic acids (LNA) as the capture probe. The hairpin LNA probe was immobilized on the nanogold (NG)/poly-eriochrome black T (EBT) film-modified glassy carbon electrode (GCE). The immobilized LNA probe could selectively hybridize with its target DNA on LNA/NG/EBT/GCE surface. The immobilization and hybridization of the LNA probe were characterized with cyclic voltammetry and electrochemical impedance spectroscopy. The hybridization of the immobilized LNA probe with the target DNA was detected by differential pulse voltammetry with the electroactive methylene blue as an indicator. The results indicated this new method has excellent specificity for single-base mismatch and complementary after hybridization, and a high sensitivity. This novel electrochemical biosensor has been used for assay of PCR real sample with satisfactory result.     

A regenerative ratiometric electrochemical biosensor for selective detecting Hg based on Y-shaped/hairpin DNA transformation

Inspired by dual-signaling ratiometric mechanism which could reduce the influence of the environmental change, a novel, convenient, and reliable method for the detection of mercury ions (Hg²⁺) based on Y-shaped DNA (Y-DNA) was developed. Firstly, the Y-DNA was formed via the simple annealing way of using two different redox probes simultaneously, omitting the multiple operation steps on the electrode. The Y-DNA was immobilized on the gold electrode surface and then an obvious ferrocene (Fc) signal and a weak methylene blue (MB) signal were observed. Upon addition of Hg²⁺, the Y-DNA structure was transformed to hairpin structure based on the formation of T-Hg²⁺-T complex. During the transformation, the redox MB gets close to and the redox Fc gets far away from the electrode surface, respectively. This special design allows a reliable Hg²⁺ detection with a detection range from 1 nM to 5 μM and a low detection limit down to 0.094 nM. Furthermore, this biosensor exhibits good selectivity and repeatability, and can be easily regenerated by using l-cysteine. This study offers a simple and effective method for designing ratiometric biosensors for detecting other ions and biomolecules.     

Nucleic acid biosensor for detection of hepatitis B virus using 2,9-dimethyl-1,10-phenanthroline copper complex as electrochemical indicator

In this study, an electrochemical DNA biosensor was developed based on the recognition of target DNA by hybridization detection. The study was carried out using glassy carbon electrode (GCE) modified with lable-free 21-mer single-stranded oligonucleotides related to hepatitis B virus sequence via covalent immobilization and [Cu(dmp)(H₂O)Cl₂] (dmp = 2,9-dimethyl-1,10-phenanthroline) as an electrochemical indicator, whose sizes are comparable to those of the small groove of native double-duplex DNA. The method, which is simple and low cost, allows the accumulation of copper complex within the DNA layer. Electochemical detection was performed by cyclic voltammetry and differential pulse voltammetry over the potential range where the [Cu(dmp)(H₂O)Cl₂] was active. Numerous factors affecting the probe immobilization, target hybridization, and indicator binding reactions were optimized to maximize the sensitivity and speed the assay time. With this approach, a sequence of the hepatitis B virus could be quantified over the ranges from 8.82 × 10⁻⁸ to 8.82 × 10⁻⁷ M with a linear correlation of r = 0.9937 and a detection limit of 7.0 × 10⁻⁸ M. The [Cu(dmp)(H₂O)Cl₂] signal observed from probe sequence before and after hybridization with four bases mismatch containing sequence is lower than that observed after hybridization with complementary sequence.     

An electrochemical biosensor for direct detection of DNA using polystyrene-g-soya oil-g-imidazole graft copolymer

A label-free electrochemical DNA biosensor was developed through the attachment of polystyrene-g-soya oil-g-imidazole graft copolymer (PS-PSyIm) onto modified graphene oxide (GO) electrodeposited on glassy carbon electrode (GC). GC/GO electrode was initially functionalised via electrochemical reduction of 4-nitrobenzene diazonium salt, followed by the electrochemical reduction of NO₂ to NH₂. Subsequent to the electrochemical deposition of gold nanoparticles on modified surface, the attachment of the PS-PSyIm graft copolymer on the resulting electrode was achieved. The interaction of PS-PSyIm with DNA at the bare glassy carbon electrode was studied by cyclic voltammetry technique, and it was found that interaction predominantly takes place through intercalation mode. The selectivity of developed DNA biosensor was also explored by DPV on the basis of considering hybridisation event with non-complementary, one-base mismatched DNA and complementary target DNA sequence. Large decrease in the peak current was found upon the addition of complementary target DNA. The sensitivity of the developed DNA biosensor was also investigated, and detection limit was found to be 1.20 nmol L^?1.     

Label-free optical biosensor for target detection based on simulation-assisted catalyzed hairpin assembly

The development of efficient and convenient strategy without involving enzyme or complex nanomaterial for the micro molecules detection has profound meaning in the diagnosis of diseases. Herein, taking the advantages of the strong affinity of aptamer and catalyzed hairpin assembly, we develop a new non-label optical amplified strategy for thrombin detection in this work. To support both biological inquiry and technological innovation, thermodynamic models are introduced to predict the minimum energy secondary structure of interacting nucleic acid strands and calculate the partition function and equilibrium concentration for complexes in our system. Then, the thermodynamics properties of interacting DNA strands and the reactions of toehold strand displacement-driven assembly have been simulated, validating the feasibility of the theory and optimizing the follow-up lab tests. Following that, our strategy for thrombin detection is proved to be feasible and effective in biological experiment. Taken together, such a biosensor has a good potential in bioactive molecules detection and disease diagnosis for future biological research.     

An electrochemical microRNA biosensor based on protein p19 combining an acridone derivate as indicator and DNA concatamers for signal amplification

The new acridone derivative 5, 7-dinitro-2-sulfo-acridone (DSA) with excellent electrochemical activity was synthesized and reported for the first time in this paper. Then an electrochemical biosensor was fabricated for the signal amplified detection of microRNA (miRNA) via applying home-made DSA as signal unit. The p19 protein-functionalized magnetic beads (PFMBs) for specific recognition and enrichment of miRNA. Then DSA is combined with the long DNA concatamers, which functions as a signal enhancement platform to facilitate the high selectivity and sensitivity determination of miRNA. The usage of this novel electrochemical activity made a contribution to the performance of the approach, such as achieving a detection limit of 6 aM. To the best of our knowledge, this is the first attempt to apply DSA, PFMBs and long DNA concatamers for the fabrication of the electrochemical biosensors, which may represent a promising path toward early diagnosis of cancer at the point of care.     

A Simple Electrochemical Aptamer Cytosensor for Direct Detection of Chronic Myelogenous Leukemia K562 Cells

A simple and rapid electrochemical aptamer cytosensor has been developed for direct detection of chronic myelogenous leukemia (CML) K562 cells based on a specific aptamer and a biotin conjugated concanavalin A (bio‐ConA) detection probe. The K562 cell could be specifically recognized by T2‐KK1B10 capture aptamer pre‐immobilized on gold modified electrode surface. Then, bio‐ConA was added in the reaction to identify K562 cell surface mannose, resulting in an aptamer‐K562 cell‐bio‐ConA sandwich complex. Finally, streptavidin conjugated alkaline phosphatase (ST‐ALP) combined with the bio‐ConA to catalyze α‐naphthyl (α‐NP) phosphate to form α‐naphthol which is highly electroactive at an operating voltage of 180 mV (vs. Ag/AgCl). Under optimum conditions, the DPV signals were proportional to the logarithm of K562 cell from 1×10² to 1×10⁷ cells mL⁻¹ with a detection limit of 79 cells mL⁻¹. The cytosensor also exhibited high selectivity, stability and reproducibility. When applied to detect K562 cells in human blood samples, recoveries between 79.6 %–93.3 % were obtained, indicating the developed biosensor would be a potential alternative tool for CML K562 cell detection in real biological samples.     

Voltammetric detection of damage to DNA caused by nitro derivatives of fluorene using an electrochemical DNA biosensor

An electrochemical DNA biosensor based on the screen printed carbon paste electrode (SPCPE) with an immobilized layer of calf thymus double-stranded DNA has been used for in vitro investigation of the interaction between genotoxic nitro derivatives of fluorene (namely 2-nitrofluorene and 2,7-dinitrofluorene) and DNA. Two types of DNA damage have been detected at the DNA/SPCPE biosensor: first, that caused by direct association of the nitrofluorenes, for which an intercalation association has been found using the known DNA intercalators [Cu(phen)₂]²⁺ and [Co(phen)₃]³⁺ as competing agents, and, second, that caused by short-lived radicals generated by electrochemical reduction of the nitro group (observable under specific conditions only).     

Electrochemical DNA biosensor using a disposable electrochemical printed (DEP) chip for the detection of SNPs from unpurified PCR amplicons

In this study, we are reporting for the first time the elucidation of single nucleotide polymorphisms (SNPs) of clinically important alleles from consenting human subjects using a disposable electrochemical printed (DEP) chip in connection with differential pulse voltammetry (DPV) and a redox active molecule Hoechst 33258 [H33258, 2'-(4-hydroxyphenyl)-5-(4-methyl-1-piperazinyl)-2,5'-bi(1H-benzimidazole)]. Post-PCR products were analyzed directly without any purification process. The aggregation of the DNA-H33258 complex causes a significant drop in the peak current intensity of H33258 oxidation. The phenomenon of DNA aggregation induced by H33258 in addition to changes in anodic current peak are used to detect SNPs. Since laborious probe immobilization was not required, our biosensor offers several benefits due to its simplicity and rapid response as a promising device for genetic analysis.     

Glutathione-s-transferase based electrochemical biosensor for the detection of captan

The proposed electrochemical biosensor based on the inhibition of glutathione-s-transferase (GST) onto SAM modified gold due to captan was developed and determined by CV technique. The bioelectrode exhibited improved fast response time (12 s) with the detection limits 0.25–16 ppm, percentage inhibition >72% and high sensitivity 4.5 uA/ppm at standard optimal conditions. The recovery experiment results were found between 77% and 144% from spiked water sources. The bioelectrode was regenerated by DTT and reusable. The bioelectrodes were characterized by UV–visible, CV, AFM and STM. Thus, the proposed electrochemical biosensor is not only detected captan but also its metabolite and promising for real-time analysis of small molecules of environmental interest.     

A regenerated electrochemical biosensor for label-free detection of glucose and urea based on conformational switch of i-motif oligonucleotide probe

Improving the reproducibility of electrochemical signal remains a great challenge over the past decades. In this work, i-motif oligonucleotide probe-based electrochemical DNA (E-DNA) sensor is introduced for the first time as a regenerated sensing platform, which enhances the reproducibility of electrochemical signal, for label-free detection of glucose and urea. The addition of glucose or urea is able to activate glucose oxidase-catalyzed or urease-catalyzed reaction, inducing or destroying the formation of i-motif oligonucleotide probe. The conformational switch of oligonucleotide probe can be recorded by electrochemical impedance spectroscopy. Thus, the difference of electron transfer resistance is utilized for the quantitative determination of glucose and urea. We further demonstrate that the E-DNA sensor exhibits high selectivity, excellent stability, and remarkable regenerated ability. The human serum analysis indicates that this simple and regenerated strategy holds promising potential in future biosensing applications.     

Coupling of an indicator-free electrochemical DNA biosensor with polymerase chain reaction for the detection of DNA sequences related to the apolipoprotein E

This paper describes a disposable indicator-free electrochemical DNA biosensor applied to the detection of apolipoprotein E (apoE) sequences in PCR samples. In the indicator-free assays, the duplex formation was detected by measuring the electrochemical signal of the guanine base of nucleic acids. The biosensor format involved the immobilisation of an inosine-modified (guanine-free) probe onto a screen-printed electrode (SPE) transducer and the detection of the duplex formation in connection with the square-wave voltammetric measurement of the oxidation peak of the guanine of the target sequence.The indicator-free scheme has been characterised using 23-mer oligonucleotides as model: parameters affecting the hybridisation assay such as probe immobilisation conditions, hybridisation time, use of hybridisation accelerators were examined and optimised.The analysis of PCR samples (244 bp DNA fragments, obtained by amplification of DNA extracted from human blood) required a further optimisation of the experimental procedure. In particular, a lower steric hyndrance of the probe modified surface was essential to allow an efficient hybridisation of the target DNA fragment. Negative controls have been performed using the PCR blank and amplicons unrelated to the immobilised probe. A 10 min hybridisation time allowed a full characterisation of each sample.