全钒液流电池碳电极材料的研究进展

近年来,全钒液流电池作为一种大规模储能装置,其电极材料得到了广泛的研究,并且获得了一定的进展.本文简述了全钒液流电池对电极材料的要求,综述了其电极材料的研究进展,重点介绍了碳电极及其改性方面的工作,并对其电极材料的发展趋势进行了展望.     

Preparation and characterization of sulfonated polyimide/TiO2 composite membrane for vanadium redox flow battery

A sulfonated polyimide (SPI)/TiO₂ composite membrane was fabricated by a blend way to improve its performance in vanadium redox flow battery (VRB). Both EDS and XRD results verify the successful preparation of the SPI/TiO₂ composite membrane. The surface SEM image shows its homogeneous structure. TG analysis identifies its thermal stability. The SPI/TiO₂ composite membrane possesses much lower permeability of VO²⁺ ions (2.02?×?10^?7 cm² min^?1) and favorable proton conductivity (3.12?×?10^?2 S cm^?1). The VRB single cell with SPI/TiO₂ composite membrane shows higher coulombic efficiency (93.80–98.00 %) and energy efficiency (83.20–67.61 %) at the current density ranged from 20 to 80 mA cm^?2 compared with that with Nafion 117 membrane. And the operational stability of the as-prepared composite membrane is good after 50 times of cycling tests. Therefore, the low-cost SPI/TiO₂ composite membrane with excellent battery performance exhibits a great potential for application in VRB.     

A highly concentrated vanadium protic ionic liquid electrolyte for the vanadium redox flow battery

A protic ionic liquid is designed and implemented for the first time as a solvent for a high energy density vanadium redox flow battery.Despite being less condu...     

Hydrothermal ammoniated treatment of PAN-graphite felt for vanadium redox flow battery

A novel method of hydrothermal ammoniated treatment on the polyacrylonitrile (PAN)-based graphite felt for vanadium redox flow battery was developed. The graphite felt was treated in a Teflon-lined stainless steel autoclave for different time at 180 °C. The content of nitrogen in the PAN graphite felt changed from 3.803% to 5.367% by adjusting treatment time to 15 h in ammonia solution, while FT-IR results indicated that nitrogenous groups were introduced. The electrochemical properties of these graphite felts were characterized by cyclic voltammetry, electrochemical impedance spectroscopy, as well as cell charge and discharge tests. The energy efficiency of the treated graphite felt reached 85% at a current density of 20 mA/cm². The corresponding coulombic efficiency and voltage efficiency were 95.3% and 75.1%, respectively. The improvement of the electrochemical properties for the treated graphite felt might be attributed to the increase of polar nitrogenous groups of carbon fiber surface, which facilitated charge transfer between electrode and vanadium ions.     

A phosphotungstic acid coupled silica-Nafion composite membrane with significantly enhanced ion selectivity for vanadium redox flow battery

An ultra-high ion-selective Nafion composite membrane modified by phosphotungstic acid(PWA)coupled silica for vanadium redox flow battery(VRB)was constructed and prepared through solution casting.The composite membrane exhibits excellent proton conductivity and vanadium ions blocking property by incorporating the nanohybrid composed of silica and PWA into the Nafion ionomer.Simple tuning for the filling amount of the nanohybrid endows the obtained membranes preeminent vanadium barrier property including a minimum vanadium permeability of 3.13×10~(-7)cm~2min~(-1)and a maximum proton conductivity of 0.081 S cm~(-1)at 25°C.These indicate an ion selectivity of 2.59×10~5S min cm~(-3),which is 6.8times higher than that of recast Nafion(0.33×10~5S min cm~(-3)).As a result,the VRB with the composite membrane shows superior battery performance containing a lower self-discharge rate,higher capacity retention and more robust cyclic stability compared with recast Nafion over a range of current densities from 40 to 100 m A cm~(-2).     

Sulfonated poly(phthalazinone ether sulfone) membrane as a separator of vanadium redox flow battery

To develop a novel and low-cost membrane as a separator of vanadium redox flow battery, sulfonated poly(phthalazinone ether sulfone) (SPPES) was prepared by sulfonating PPES with fuming sulfuric acid. By testing the sulfonation degree, intrinsic viscosity, and solubility of SPPES, the results showed that sulfonated polymers had higher intrinsic viscosities and excellent solubility in most polar solvents. IR analysis revealed that the –SO₃H group was successfully attached to SPPES backbone. DSC and TG results showed that SPPES exhibited higher T _g than that of PPES, and T _d at the first weight loss of SPPES was about 300?°C. The SPPES membrane (SP-02) showed a dramatic reduction in crossover of vanadium ions across the membrane compared with that of the Nafion membrane. Cell tests identified that VRB with the SPPES membrane exhibited a lower self-discharge rate, higher coulombic efficiency (92.82%), and higher energy efficiency (67.58%) compared with the Nafion system. Furthermore, cycling tests indicated that the single cell with SPPES membrane exhibited a stable performance during 100?cycles.     

Novel sulfonated polyimide/ZrO2 composite membrane as a separator of vanadium redox flow battery

Sulfonated polyimide (SPI) and ZrO₂ are blended to prepare a series of novel SPI/ZrO₂ composite membranes for vanadium redox flow battery (VRFB) application. Results of atomic force microscopy and X‐ray diffraction reveal that ZrO₂ is successfully composited with SPI. All SPI/ZrO₂ membranes possess high proton conductivity (2.96–3.72 × 10^?2 S cm^?1) and low VO²⁺ permeability (2.18–4.04 × 10^?7 cm² min^?1). SPI/ZrO₂‐15% membrane is determined as the optimum one on account of its higher proton selectivity and improved chemical stability. The VRFB with SPI/ZrO₂‐15% membrane presents higher coulombic efficiency and energy efficiency than that with Nafion 117 membrane at the current density, which ranged from 20 to 80 mA cm^?2. Cycling tests indicate that the SPI/ZrO₂‐15% membrane has good operation stability in the VRFB system. Copyright © 2014 John Wiley & Sons, Ltd.     

表面修饰模式对Nafion离子选择性影响及在VRFB中的应用

本文采用壳聚糖-磷钨酸层对Nafion膜表面分别进行单面和双面修饰改性,研究了修饰模式对Nafion膜钒离子渗透率、电导率及离子选择性的影响. 结果表明,单面、双面修饰改性均会使Nafion膜的钒离子渗透率显著降低,最高降幅分别达到89.9% (单面修饰) 和92.7% (双面修饰);单面、双面修饰改性均会使Nafion膜的电导率下降,但存在明显差异,在相同修饰厚度条件下,双面修饰改性对Nafion膜电导率的影响比单面修饰改性更小。因此,双面修饰复合膜展示出了比单面修饰复合膜更高的离子选择性,并且在修饰层厚度为17 μm时达到最大值（1.12×10⁵ S•min•cm^-3）. 基于优化的双面修饰Nafion膜的全钒液流电池,在充放电流密度30 mA•cm^-2 时,库伦效率和能量效率分别达到93.5%和 80.7%, 并且在测试时间内展示出良好的循环稳定性.     

Superior electrocatalytic negative electrode with tailored nitrogen functional group for vanadium redox flow battery

Development of electrodes with high electrocatalytic activity and stability is essential for solving problems that still restrict the extensive application of vanadium redox flow batteries(VRFBs).Here,we designed a novel negative electrode with superior electrocatalytic activity by tailoring nitrogen functional groups,such as newly formed nitro and pyridinic-N transformed to pyridonic-N,from the prenitrogen-doped electrode.It was experimentally confirmed that an electrode with pyridonic-N and ni...     

Preparation and characterization of Nafion/SPEEK layered composite membrane and its application in vanadium redox flow battery

In order to reduce the cost of membrane used in vanadium redox flow battery (VRB) system while keeping its chemical stability, Nafion/sulfonated poly(ether ether ketone) (SPEEK) layered composite membrane (N/S membrane) consisting of a thin layer of recast Nafion membrane and a layer of SPEEK membrane were prepared by chemical crosslink the sulfonic acid groups of different ionomer membranes. Scanning electron microscopy (SEM) and IR spectra analysis of the membrane showed that Nafion layer was successfully deposited on the SPEEK membrane surface and an integral layered membrane structure was formed. The area resistance and permeability of vanadium ions of membrane were also measured. It was found that N/S membrane have a very low permeability of vanadium ions accompanied by a little higher area resistance compared with Nafion membrane. As a result, the VRB single cell with N/S membrane exhibited higher coulombic efficiency and lower voltage efficiency compared with VRB single cell with Nafion membrane. Although N/S membrane delivered relatively lower energy efficiency compared with Nafion membrane, its good chemical stability and low cost make it a suitable substitute for Nafion membrane used in VRB system.     

Improved properties of positive electrolyte for a vanadium redox flow battery by adding taurine

Taurine was employed as an additive to improve the thermal stability and electrochemical performance of positive electrolyte for a vanadium redox flow battery. The addition of taurine could significantly improve the thermal stability of positive electrolyte, and 2 M V(V) electrolyte with 4 mol% taurine could keep it stable at 40 °C for 120 h, which was 54 h longer than the pristine one. Electrochemical measurements showed that the electrolyte with taurine exhibited superior electrochemical activity and reaction kinetics with a larger diffusion coefficient, exchange current density and reaction rate constant compared with the pristine one. Moreover, the cell using taurine as additive achieved higher average energy efficiency (81.75%) than the pristine cell (79.15%). The Raman and XPS spectroscopy illustrated that taurine could combine with VO²⁺ to form a small molecule complex and the –NH₂ in taurine could be adsorbed on the surface of the electrode to provide more active sites for the electrode reaction, which led to the improvement of mass transfer and the charge transfer process for the V(IV)/V(V) redox reaction.     

Custom-made sulfonated poly (vinylidene fluoride-co-hexafluoropropylene) nanocomposite membranes for vanadium redox flow battery applications

Sulfonated poly (vinylidene fluoride-co-hexafluoropropylene) (SPVDF-co-HFP) based nanocomposite proton exchange membranes (PEM) are fabricated by simple solution casting method using polydopamine coated exfoliated molybdenum disulfide (PDA-MoS₂) nanosheets as an alternative for Nafion® in vanadium redox flow batteries (VRFBs). PDA-MoS₂ is synthesized by the etching of exfoliated MoS₂ nanosheets with dopamine molecule by self-polymerization method. Various characteristic results clearly demonstrated that the incorporated PDA-MoS₂ nanosheets homogeneously distributed into the SPVDF-co-HFP matrix and the presence of NH/NH₂ group electrostatically interacts with SPVDF-co-HFP to form a strong acid-base pair and thus enhances the proton transport via Grotthuss type mechanism. Besides, the improvement in surface hydrophilicity provides the vehicle type conduction also. As a result, SPVDF-co-HFP/PM nanocomposite membranes showed higher proton conductivity in comparison with the pristine membrane. Especially SPVDF-co-HFP/PM-1 membrane demonstrated the excellent proton conductivity of 5.24 × 10⁻³ Scm⁻¹ at 25 °C, lower vanadium-ion permeability of 1.05 × 10⁻⁸ cm²min⁻¹ and highest membrane selectivity of 49.9 × 10⁴ Scm⁻³min. On the other hand, vanadium-ion stability of the membrane increased by adding the PD-MoS₂ content is attributed to their strong electrostatic attraction towards the polymer matrix. Overall results suggested that the SPVDF-co-HFP/PM-1 nanocomposite membrane is found to be a better alternative for commercially costly Nafion in VRFB applications.     

Sulfonated poly(ether ether ketone)/poly(vinylidene fluoride)/graphene composite membrane for a vanadium redox flow battery

Journal of Solid State Electrochemistry - Sulfonated poly(ether ether ketone)/poly(vinylidene fluoride)/graphene (S/P/G) composite membrane was prepared through a solution-casting method for a...     

The effect of phosphate additive on the positive electrolyte stability of vanadium redox flow battery

The electrolyte is one of the most important components of vanadium redox flow battery(VRFB),and its stability and solubility determines the energy density of a VRFB.The performance of current positive electrolyte is limited by the low stability of VO_2~+at a higher temperature.Phosphate is proved to be a very effective additive to improve the stability of VO_2~+.Even though,the stabilizing mechanism is still not clear,which hinders the further development of VRFBs.In this paper,to clarify the effect of phosphate additive on the positive electrolyte stability,the hydration structures of VO_2~+cations and the reaction mechanisms of precipitation with or without phosphate in the supporting electrolyte of H_2SO_4solutions were investigated in detail based on calculations of electronic structure.The stable configurations of complexes were optimized at the B3LYP/6-311+G(d,p)level of theory.The zero-point energies and Gibbs free energies for these complexes were further evaluated at the B3LYP/aug-cc-pVTZ level of theory.It shows that a structure of[VO_2(H_2O)_2]~+ surrounded by water molecules in H_2SO_4solution can be formed at the room temperature.With the temperature rises,[VO_2(H_2O)_2]~+ will lose a proton and form the intermediate of VO(OH)_3,and the further dehydration among VO(OH)_3molecules will create the precipitate of V_2O_5.When H_3PO_4was added into electrolytes,the V-O-P bond-containing neutral compound could be formed through interaction between VO(OH)_3and H_3PO_4,and the activation energy of forming the V-O-P bond-containing neutral compound is about 7 kcal mol~(-1) lower than that of the VO(OH)_3dehydration,which could avoid the precipitation of V_2O_5and improve the electrolyte stability.     

Modified multiwalled carbon nanotubes as an electrode reaction catalyst for an all vanadium redox flow battery

Different modified multiwalled carbon nanotubes (MWCNTs) are prepared by heat treatments in the air and in the H₂SO₄?+?HNO₃ (1:1) mixed acids which are investigated by transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, Brunaur–Emmett–Teller, and cyclic voltammetry measurements. The results show the physicochemical properties of MWCNTs change significantly after these different modification processes, especially the electrochemical catalytic activity towards the VO₂ ⁺/VO²⁺ and V³⁺/V²⁺ redox pairs. The MWCNTs treated in the air at 600 °C for 30 min shows better electrochemical performances for the VO₂ ⁺/VO²⁺ redox reactions (58.8 and ?32.4 μA for the oxidation and reduction peaks at 10 mV?s^?1, respectively) than any other samples. Compared with the V³⁺/V²⁺ redox couple, the VO₂ ^+/VO²⁺ redox reactions are more easily affected by the physicochemical property changes of the MWCNTs. The enhanced electrochemical catalytic activity of the modified MWCNTs is not only related to the surface oxygen content, but also to the specific surface area, conductivity and the unique structure variations of the MWCNTs. The investigation demonstrated that the modified MWCNTs have a promising future application in the vanadium redox flow battery.     

Water transport study across commercial ion exchange membranes in the vanadium redox flow battery

The water transfer behaviour of Selemion CMV, AMV and DMV membranes (Asahi Glass, Japan) has been studied in the vanadium redox cell, as was the water transfer across Nafion 117 membrane (E.I. Du Pont, USA). The earlier water transport studies of a variety of commercial ion exchange membranes and non-ionic separators in the vanadium redox cell have shown that the net water transport through anion exchange membranes and non-ionic separators in the vanadium redox cell is from the positive half cell (+ve) to the negative half cell (−ve), while for cation exchange membranes the net water transport is in the opposite direction. In the present study, it was found that a significant amount of water is transferred across cation exchange membranes from the −ve vanadium half cell electrolyte to the +ve vanadium half cell electrolyte by the hydration shells of V²⁺ and V³⁺ ions which carry a large amount of water and can easily permeate through cation exchange membranes due to their relatively high charge numbers. The net amount of water of hydration which is transferred across anion exchange membranes from the −ve half cell electrolyte, however, is almost equal to the net amount of water of hydration which is transferred from the +ve half cell electrolyte. Thus, the net amount of water which is transferred across anion exchange membranes is in the same direction as the osmotic water transfer.     

Non-aqueous vanadium acetylacetonate electrolyte for redox flow batteries

The electrochemistry of a single-component redox flow battery employing vanadium(III) acetylacetonate in acetonitrile and tetraethylammonium tetrafluoroborate has been investigated. The electrode kinetics of the anodic and cathodic reactions were studied using cyclic voltammetry. The V(II)/V(III) and V(III)/V(IV) couples were quasi-reversible and together yielded a cell potential of 2.2 V. The diffusion coefficient for vanadium acetylacetonate was estimated to be in the range of 1.8–2.9 × 10^?6 cm² s^?1 at room temperature. The charge–discharge characteristics of this system were evaluated in an H-type glass cell, and coulombic efficiencies near 50% were achieved.     

Preparation of cation exchange membrane as a separator for the all-vanadium redox flow battery

Chlorosulfonated homogeneous polyethylene (PE) dense film (PE-X) and asymmetric membrane (MH-X) were tested as separators for the all-vanadium redox flow battery. The membranes are prepared by the vapour phase chlorosulfonation of the PE film. The measured lowest resistivites equilibrated in 2 M KCl aqueous solution were 0.27 Ω cm² and 0.96 Ω cm², respectively, for PE-X (with thickness 20 μm) and for MH-X (with PE-layer 20 μm). The area resistivities of the membranes as separators in the all-vanadium redox flow battery were obtained. At a charge-discharge current density 633 A/m², these values were 3.09 Ω cm² and 3.46 Ω cm², respectively, for charge and discharge PE-X, and were 3.26 Ω cm² and 8.30 Ω cm², respectively, for charge and discharge MH-X.     

A membrane based on sulfonated polystyrene for a vanadium solid-salt battery

An ion exchange membrane (IEM) usually serves as a separator between the two half-cells and provides an ionic conduction path in redox flow batteries. The new vanadium solid-salt battery (VSSB) presents higher energy density than the traditional vanadium redox flow batteries (VRFBs). However, present IEMs are based on very expensive Nafion® membranes. In pursuit of lower cost, a membrane from sulfonated polystyrene (PE-01) is used for VSSB. In comparison with the traditional Nafion® 1135, PE-01 shows high energy efficiency with good cycling performance at current densities less than 10 mA cm^?2. This suggests that sulfonated polystyrene membrane is a promising candidate as separator for VSSB.