Phosphatization: A promising approach to enhance the performance of mesoporous TiO2 anode for lithium ion batteries

We report phosphatization is a promising method to enhance the performance of mesoporous TiO₂ anode for lithium ion batteries. The resulting phosphated mesoporous TiO₂ possessed higher reversible capacity and better cycling stability than the pure mesoporous TiO₂. When cycled at 30 mA/g between 3.0 and 1.0 V, the initial capacity of phosphate mesoporous TiO₂ was 249 mA h/g, significantly higher than that of pure mesoporous TiO₂ (204 mA h/g). After 40 cycles, the capacity retention ratio of phosphate mesoporous TiO₂ reached 83.7%, while pure mesoporous TiO₂ had merely a capacity retention ratio of 62.3%. We believe that this phosphatization process could be used to enhance the electrochemical performance of other metal oxides for lithium ion batteries.     

Tio2@Sn core–shell nanotubes for fast and high density Li-ion storage material

TiO₂@Sn core–shell nanotube material prepared by thermal decomposition of SnCl₄ on TiO₂ nanotubes at 300 °C has been demonstrated superior Li-ion storage capability of 176 mA h/g even at high current rate of 4000 mA/g (charge and discharge of all TiO₂ within 5 min) in spite of using low carbon content (5 wt%). This value corresponds to volumetric energy densities of 317 mA h/cm³, and its value was 3.5-fold larger than that of the bare TiO₂ nanotubes.     

Influence of particle size on the photoactivity of Ti/TiO2 thin film electrodes,and enhanced photoelectrocatalytic degradation of indigo carmine dye

Photoanodes based on Ti/TiO₂ thin films were prepared by the sol–gel method, using either tetraisopropoxide (Ti(OPri)₄) or modified tetraisopropoxide, producing electrodes with different sized nanoparticle coatings, termed nanoporous (20 nm) or nanoparticulated (10 nm) electrodes. The anatase form dominated the composition of the nanoparticulated electrode, which presented a higher surface area, a flat band potential shift of ?160 mV and a 50% improvement in photoactivity, compared to the nanoporous electrode. 100% color removal, and 75% mineralization, of indigo carmine dye were achieved after 15 min of photoelectrocatalytic treatment using a nanoparticulated Ti/TiO₂ electrode operated at a current density of 0.4 mA cm^?2. Our findings indicate that the use of nanoparticulated electrodes, under UV irradiation and with controlled current density, is an efficient alternative for the removal of food dye contaminants during wastewater treatment.     

Anatase TiO2 nanosheet: An ideal host structure for fast and efficient lithium insertion/extraction

Anatase TiO₂ nanosheets with largely exposed (0 0 1) facets have been synthesized by a modified method. Exploitation of these nanosheets as a host structure for reversible lithium insertion/extraction has been investigated. It is found that these TiO₂ nanosheets manifest much lower initial irreversible losses compared to other anatase TiO₂ nanostructures, and excellent cycling performance at a charge–discharge rate as high as 20 C. The superior reversible lithium storage capability can be attributed to the ultrathin nanosheet structure: a large exposed effective area and a very short diffusion path. It thus attests the promising use of these anatase TiO₂ nanosheets in high-power lithium–ion batteries.     

A novel network composite cathode of LiFePO4/multiwalled carbon nanotubes with high rate capability for lithium ion batteries

A novel network composite cathode was prepared by mixing LiFePO₄ particles with multiwalled carbon nanotubes for high rate capability. LiFePO₄ particles were connected by multiwalled carbon nanotubes to form a three-dimensional network wiring. The web structure can improve electron transport and electrochemical activity effectively. The initial discharge capacity was improved to be 155 mA h/g at C/10 rate (0.05 mA/cm²) and 146 mA h/g at 1C rate. The comparative investigation on MWCNTs and acetylene black as a conducting additive in LiFePO₄ proved that MWCNTs addition was an effective way to increase rate capability and cycle efficiency.     

Structural and electrochemical investigation of Li2MgSnO4 anode for lithium batteries

Hexagonal Li₂MgSnO₄ compound was synthesized at 800 °C using Urea Assisted Combustion (UAC) method and the same has been exploited as an anode material for lithium battery applications. Structural investigations through X-ray diffraction, Fourier Transform Infra Red spectroscopy and ⁷Li NMR (Nuclear Magnetic Resonance spectroscopy) studies demonstrated the existence of hexagonal crystallite structure with a = 6.10 and c = 9.75. An average crystallite size of ∼400 nm has been calculated from PXRD pattern, which was further evidenced by SEM images. An initial discharge capacity of ∼794 mA h/g has been delivered by Li₂MgSnO₄ anode with an excellent capacity retention (85%) and an enhanced coulombic efficiency (97–99%). Further, the Li₂MgSnO₄ anode material has exhibited a steady state reversible capacity of ∼590 mA h/g even after 30 cycles, thus qualifying the same for use in futuristic lithium battery applications.     

Hydrogen peroxide-photofuel cell using TiO2 photoanode

Hydrogen peroxide-fuel cell (H₂O₂-FC) possesses a theoretical power generating efficiency of 119% much larger than hydrogen/oxygen (H₂/O₂)-FC (82.9%) with a thermodynamic electromotive force of 1.09 V. This communication presents the prototype of H₂O₂-photofuel cell (PFC) without using noble metal catalyst. The H₂O₂-PFC is comprised of mesoporous anatase TiO₂ nanocrystalline film coated on fluorine-doped tin oxide electorode (mp-TiO₂/FTO, photoanode), glassy carbon (cathode), and an aqueous electrolyte solution containing 0.1 M NaClO₄ and 0.1 M H₂O₂. Under UV-light irradiation, the H₂O₂-PFC stably works, providing a short-circuit current of 0.24 mA cm^− 2 and an open-circuit voltage of 0.72 V at ambient temperature and pressure, while current hardly flows in the dark. Further, the PFC responds to visible-light due to the charge-transfer complex formation of H₂O₂ on the TiO₂ surface.     

CdSe/TiO2 nanocrystalline solar cells

CdSe sensitized TiO₂ nanocrystalline solar cells were made with the participation of silicotungstic acid (STA) during the deposition of CdSe, the resulting Voc and Isc were 0.23 V cm^-2 and 10 mA cm^-2, respectively. The doping, time and microporous membrane effects were also discussed.     

Paper-like free-standing polypyrrole and polypyrrole–LiFePO4 composite films for flexible and bendable rechargeable battery

Highly flexible, paper-like, free-standing polypyrrole and polypyrrole–LiFePO₄ composite films were prepared using the electropolymerization method. The films are soft, lightweight, mechanically robust and highly electrically conductivity. The electrochemical behavior of the free-standing films was examined against lithium counter electrode. The electrochemical performance of the free-standing pure PPy electrode was improved by incorporating the most promising cathode material, LiFePO₄, into the PPy films. The cell with PPy–LiFePO₄ composite film had a higher discharge capacity beyond 50 cycles (80 mA h/g) than that of the cell with pure PPy (60 mA h/g). The free-standing films can be used as electrode materials to satisfy the new market demand for flexible and bendable batteries that are suitable for the various types of design and power needs of soft portable electronic equipment.     

Comparison of mechanically alloyed and sputtered tin–cobalt–carbon as an anode material for lithium-ion batteries

High energy ball milling, vertical-axis attritor milling and co-sputtering were used to prepare Sn₃₀Co₃₀C₄₀ or Sn₃₆Co₄₁C₂₃ electrode materials. By varying the milling conditions, it was possible to obtain nanostructured materials by mechanical methods whose X-ray diffraction patterns mimicked the diffraction pattern of the co-sputtered material. Electrochemical testing showed that composite electrodes made from each of the prepared materials showed stable charge–discharge capacity for at least 100 charge–discharge cycles and stable differential capacity versus potential profiles. Although the materials appear to be similarly nanostructured, the sputtered material showed a reversible capacity near 610 mA h/g, close to the theoretical capacity of 661 mA h/g, while the best material prepared by mechanical methods attained a specific capacity near 470 mA h/g. Further experiments are required to understand the differences in the nanostructure of these materials that leads to the differences in attained specific capacity.     

Mesoporous germanium as anode material of high capacity and good cycling prepared by a mechanochemical reaction

Mesoporous Ge was prepared by mechanochemical reaction of GeO₂ and Mg powders followed by an etching process with HCl solution. It was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and charge–discharge measurement. With a pore-distribution concentrated around 10 nm, the product presents a BET surface area of 49.98 m²/g. When using as an anode material for lithium ion battery, the mesoporous Ge exhibits a reversible capacity of 950 mA h/g and retains a capacity of 789 mA h/g after 20 cycles at a current density of 150 mA/g. The cycleability is significantly improved compared with non-porous Ge.     

Rapid microwave-solvothermal synthesis of phospho-olivine nanorods and their coating with a mixed conducting polymer for lithium ion batteries

Olivine LiFePO₄ nanorods have been synthesized, for the first time, by a rapid microwave-solvothermal approach within 5 min at temperatures as low as 300 °C without requiring any inert atmosphere or post annealing at elevated temperatures in reducing gas atmospheres. The resulting LiFePO₄ nanorods have subsequently been encapsulated within a mixed electronically and ionically conducting p-toluene sulfonic acid (p-TSA) doped poly(3,4-ethylenedioxythiophene) (PEDOT) at ambient-temperatures to obtain an organic–inorganic nanohybrid. The LiFePO₄–PEDOT nanohybrid offers discharge capacity (166 mA h/g) close to the theoretical value (170 mA h/g) with excellent capacity retention and rate capability, reducing significantly the manufacturing cost.     

Bioelectrocatalytic formate oxidation and carbon dioxide reduction at high current density and low overpotential with tungsten-containing formate dehydrogenase and mediators

We show a great possibility of mediated enzymatic bioelectrocatalysis in the formate oxidation and the carbon dioxide (CO₂) reduction at high current densities and low overpotentials. Tungsten-containing formate dehydrogenase (FoDH1) from Methylobacterium extorquens AM1 was used as a catalyst and immobilized on a Ketjen Black-modified electrode. For the formate oxidation, a high limiting current density (j_lim) of ca. 24 mA cm^− 2 was realized with a half wave potential (E_1/2) of only 0.12 V more positive than the formal potential of the formate/CO₂ couple (E°′_CO2) at 30 °C in the presence of methyl viologen (MV^2 +) as a mediator, and j_lim reached ca. 145 mA cm^− 2 at 60 °C. Even when a viologen-functionalized polymer was co-immobilized with FoDH1 on the porous electrode, j_lim of ca. 30 mA cm^− 2 was attained at 60 °C with E_1/2 = E°′_CO2 + 0.13 V. On the other hand, the CO₂ reduction was also realized with j_lim ≈ 15 mA cm^− 2 and E_1/2 = E°′_CO2 − 0.04 V at pH 6.6 and 60 °C in the presence of MV^2 +.     

Photocatalytic activity of nitrogen and copper doped TiO2 nanoparticles prepared by microwave-assisted sol-gel process

Cu and N-doped TiO₂ photocatalysts were synthesized from titanium (IV) isopropoxide via a microwave-assisted sol-gel method. The synthesized materials were characterized by X-ray diffraction, UV-vis diffuse reflectance, photoluminescence (PL) spectroscopy, SEM, TEM, FT-IR, Raman spectroscopy, photocurrent measurement technique, and nitrogen adsorption–desorption isotherms. Raman spectra and XRD showed an anatase phase structure. The SEM and TEM images revealed the formation of an almost spheroid mono disperse TiO₂ with particle sizes in the range of 9-17 nm. Analysis of N₂ isotherm measurements showed that all investigated TiO₂ samples have mesoporous structures with high surface areas. The optical absorption edge for the doped TiO₂ was significantly shifted to the visible light region. The photocurrent and photocatalytic activity of pure and doped TiO₂ were evaluated with the degradation of methyl orange (MO) and methylene blue (MB) solution under both UV and visible light illumination. The doped TiO₂ nanoparticles exhibit higher catalytic activity under each of visible light and UV irradiation in contrast to pure TiO₂. The photocatalytic activity and photocurrent ability of TiO₂ have been enhanced by doping of the titania in the following order: (Cu, N) - codoped TiO₂ > N-doped TiO₂ > Cu-doped TiO₂ > TiO₂. COD result for (Cu, N)-codoped TiO₂ reveals ∼92% mineralization of the MO dye on six h of visible light irradiation.     

Photoinduced hydrophilic and photocatalytic response of hydrothermally grown TiO2 nanostructured thin films

It is demonstrated that nanostructured titanium (IV) oxide (TiO₂) films can be deposited on glass substrates at 95 °C using hydrothermal growth, their properties being greatly affected by the substrate materials. Anatase TiO₂ films grown on ITO for deposition period of 50 h were observed to exhibit a very efficient, reversible light-induced transition to super-hydrophilicity, reaching a nearly zero contact angle. Enhanced photocatalytic activity (65%) was found for the rutile TiO₂ samples grown on microscope glass, possibly due to their higher roughness with respect to anatase grown on ITO. The effect of the substrate material used is discussed in terms of the TiO₂ phase and morphology control, for the best photoinduced hydrophilic and photocatalytic performance of the samples.     

Nano-structured Li3V2(PO4)3/carbon composite for high-rate lithium-ion batteries

Nano-structured Li₃V₂(PO₄)₃/carbon composite (Li₃V₂(PO₄)₃/C) has been successfully prepared by incorporating the precursor solution into a highly mesoporous carbon with an expanded pore structure. X-ray diffraction analysis, scanning electron microscopy, and transmission electron microscopy were used to characterize the structure of the composites. Li₃V₂(PO₄)₃ had particle sizes of < 50 nm and was well dispersed in the carbon matrix. When cycled within a voltage range of 3 to 4.3 V, a Li₃V₂(PO₄)₃/C composite delivered a reversible capacity of 122 mA h g^? 1 at a 1C rate and maintained a specific discharge capacity of 83 mA h g^? 1 at a 32C rate. These results demonstrate that cathodes made from a nano-structured Li₃V₂(PO₄)₃ and mesoporous carbon composite material have great potential for use in high-power Li-ion batteries.     

Titania nanotube supported tin anodes for lithium intercalation

A new type of nanostructured titania nanotube supported tin anode was prepared for lithium ion batteries. The as-prepared titania nanotubes are in the anatase phase with diameters of about 12 nm. Tin nanoparticles are dramatically decorated on the titania nanotubes and have a particle size of about 10 nm. This new structure promises good retention of reversible capacity on cycling for lithium intercalation. By charge/discharge measurements, the reversible capacity of the titania nanotubes supported tin anode for lithiation and de-lithiation was found to be 312 mA h/g (cycled between 0.05 and 2.0 V) and 203 mA h/g (cycled between 0.05 and 1.3 V) after 50 cycles with around 100% columbic efficiency.     

TiO2 nanotubes as recyclable catalyst for efficient photocatalytic degradation of indigo carmine dye

TiO₂ nanotubes have been synthesized in a hydrothermal system. The nanotubes were characterized by scanning electronic microscopy (SEM), FT-Raman spectroscopy and surface charge density by surface area analyzer. These nanocatalysts were applied to photocatalyse indigo carmine dye degradation. Photodegradation ability of TiO₂ nanotubes was compared to TiO₂ anatase photoactivity. Indigo carmine dye was completely degraded at 60 and 110 min of reaction catalysed by TiO₂ nanotubes and TiO₂ anatase, respectively. TiO₂ nanotubes presented high photodegradation activity at pH 2 and TiO₂ anatase at pH 4. TiO₂ nanotubes were easily recycled whereas the reuse of TiO₂ anatase was not effective. Nanotubes maintained 90% of activity after 10 catalytic cycles and TiO₂ anatase presented only 10% of its activity after 10 cycles.     

Facile preparation of large aspect ratio ellipsoidal anatase TiO2 nanoparticles and their application to dye-sensitized solar cell

A simple one-step heat-treatment of peroxotitanate complex aqueous solution at around 100 °C was resulted in the formation of ellipsoidal anatase TiO₂ nanoparticles having a high aspect ratio with no branches. The length of these ellipsoidal TiO₂ falls in the range of 200–350 nm, depending on mole ratio of Ti⁴⁺/H₂O₂. Dye-sensitized solar cell based on these ellipsoidal nanocrystalline TiO₂ as photoanode was fabricated and characterized.     

Synthesis and characterization of high surface area TiO2/SiO2 mesostructured nanocomposite

Recently titania synthesis was reported using various structuration procedures, leading to the production of solid presenting high surface area but exhibiting moderate thermal stability. The study presents the synthesis of TiO₂/SiO₂ nanocomposites, a solid that can advantageously replace bulk titania samples as catalyst support. The silica host support used for the synthesis of the nanocomposite is a SBA-15 type silica, having a well-defined 2D hexagonal pore structure and a large pore size. The control of the impregnation media is important to obtain dispersed titania crystals into the porosity, the best results have been obtained using an impregnation in an excess of solvent. After calcination at low temperature (400 °C), nanocomposites having titania nanodomains (～2–3 nm) located inside the pores and no external aggregates visible are obtained. This nanocomposite exhibits high specific surface area (close to that of the silica host support, even with a titania loading of 55 wt.%) and a narrow pore size distribution. Surprisingly, the increase in calcination temperature up to 800 °C does not allow to detect the anatase to rutile transition. Even at 800 °C, the hexagonal mesoporous structure of the silica support is maintained, and the anatase crystal domain size is evaluated at ～10 nm, a size close to that of the silica host support porosity (8.4 nm). Comparison of their physical properties with the results presented in literature for bulk samples evidenced that these TiO₂/SiO₂ solids are promising in term of thermal stability.