Stimulated emission of free excitons in Cd1−xMnxTe under nonresonant two-photon excitation

We report on free excitons coexisting with exciton magnetic polarons (EMPs) in bulk semimagnetic semiconductors of Cd_1−xMn_xTe for 0.04?x?0.36 at 2 K under nonresonant two-photon excitation. This two-photon excitation not only generates free excitons but also more efficiently creates EMPs compared with ordinary one-photon excitation. Stimulated emission from free excitons is demonstrated under strong two-photon excitation.     

The optical properties of CdxZn1−xS thin films on glass substrate prepared by spray pyrolysis method

A series of Cd_xZn_1−xS thin films have been deposited on glass substrates using spray pyrolysis technique. The crystallinity and microstructure of Cd_xZn_1−xS thin films have been investigated by X-ray diffraction (XRD). Based on the results of Hall measurements, the films obtained were an n-type semiconductor. The X-ray data analysis of Cd_xZn_1−xS thin films showed that the grain size of the Cd_xZn_1−xS increased with increase in Cd composition. It is observed that the band gap increases as the Cd composition decreases. The results also showed a blue shift of absorption edge of optical transmission spectra is increases as Zn ratio increases. The effects of Cd composition on the structural and optical properties of Cd_xZn_1−xS thin films were related to their grain size, stress and carrier concentration.     

Structural,electronic and optical properties of CdxZn1 − xS alloys from first-principles calculations

Structural, electronic and optical properties as well as structural phase transitions of ternary alloy Cd_xZn_1 − xS have been investigated using the first-principles calculations based on the density functional theory. We found that the crystal structure of Cd_xZn_1 − xS alloys transforms from wurtzite to zinc blende as Cd content of x=0.83$x=0.83$. Effect of Cd content on electronic structures of Cd_xZn_1 − xS alloys has been studied. The bandgaps of Cd_xZn_1 − xS alloys with wurtzite and zinc blende structures decrease with the increase of Cd content. Furthermore, dielectric constant and absorption coefficient also have been discussed in detail.     

NiP:Mn as a potential magnetic contacting material to Cd1−xMnxTe

Injection of spin-polarized current into spintronic devices is a challenge to the semiconductor physicists and technologists. II-VI compound semiconductors can act as the spin aligner on the top of GaAs light emitting diode. However, II-VI compound semiconductor like Cd_1−xMn_xTe is still suffering from contacting problem. Application of electroless deposited magnetic NiP:Mn contact would enhance efficient current injection into Cd_1−xMn_xTe than the standard gold contact. A technique for electroless deposition of NiP:Mn on Cd_1−xMn_xTe have been described here. The electronic and magnetic properties of the contact material NiP:Mn and the contact performance of NiP:Mn relative to evaporated gold have been evaluated. The contact fulfills the requirements of resistivity and ferromagnetism for application to Cd_1−xMn_xTe.     

Spin-polarized structural, electronic and magnetic properties of diluted magnetic semiconductors Cd1−xMnxTe in zinc blende phase

We have investigated the structural, electronic and magnetic properties of the diluted magnetic semiconductor (DMS) Cd_1−xMn_xTe (for x=0.75 and 1.0) in the zinc blende (B3) phase by employing the ab-initio method. Calculations were performed by using the full potential linearized augmented plane wave plus local orbitals (FP-L/APW+lo) method within the frame work of spin-polarized density functional theory (SP-DFT). The electronic exchange-correlation energy is described by generalized gradient approximation (GGA). We have calculated the lattice parameters, bulk modulii and the first pressure derivatives of the bulk modulii, spin-polarized band structures, and total and local densities of states. We estimated the spin-exchange splitting energies Δ_x(d) and Δ_x(pd) produced by the Mn3d states, and we found that the effective potential for the minority spin is more attractive than that of the majority spin. We determine the s-d exchange constant N₀α (conduction band) and p-d exchange constant N₀β (valence band) and these somewhat agree with a typical magneto-optical experiment. The value of calculated magnetic moment per Mn impurity atom is found to be 4.08 μ_B for Cd_0.25Mn_0.75Te and 4.09 μ_B for Cd_0.0Mn_1.0Te. Moreover, we found that p-d hybridization reduces the local magnetic moment of Mn from its free space charge value of 5.0 μ_B and produces small local magnetic moments on the nonmagnetic Cd and Te sites.     

Structural, optical and electrical properties of Zn1−xCdxO thin films prepared by PLD

Ternary polycrystalline Zn_1−xCd_xO semiconductor films with cadmium content x ranging from 0 to 0.23 were obtained on quartz substrate by pulse laser deposited (PLD) technique. X-ray diffraction measurement revealed that all the films were single phase of wurtzite structure grown on c-axis orientation with its c-axis lattice constant increasing as the Cd content x increasing. Atomic force microscopy observation revealed that the grain size of Zn_1−xCd_xO films decreases continuously as the Cd content x increases. Both photoluminescence and optical measurements showed that the band gap decreases from 3.27 to 2.78 eV with increasing the Cd content x. The increase in Cd content x also leads to the broadening of the emission peak. The resistivity of Zn_1−xCd_xO films decreases evidently for higher values of Cd content x. The shift of PL emission to visible light as well as the decrease of resistivity makes the Zn_1−xCd_xO films potential candidate for optoelectronic device.     

Study of the quasi two-dimensional CoxNi1-xTa2O6 compounds by X-ray diffraction and magnetic susceptibility measurements

We report results on the structural and magnetic properties of the Co_xNi_1−xTa₂O₆ series of compounds by X-ray powder diffraction, magnetic susceptibility and magnetization measurements. X-ray refinements carried out by the Rietveld method show that these compounds crystallize in a P4₂/mnm tetragonal structure. Magnetic susceptibility curves show a broadened maximum witnessing that these compounds exhibit two-dimensional antiferromagnetic behaviors. All the Co_xNi_1−xTa₂O₆ compounds order below 10 K and present a large ion anisotropy. The magnetic properties have been determined in both the paramagnetic and antiferromagnetic state. In the hypothesis of two dimensional AF ordering, the near neighbor exchange constants (J₁) and the next near neighbor exchange constants for two different paths (J₂ and J'₂) were determined. The composition dependence of the magnetic properties including ordering temperature, exchange constants and anisotropy factors are discussed. The drastic reduction of the ordering temperature for x=0.20 for Co_xNi_1−xTa₂O₆, suggest the hypothesis of a peculiar magnetic behavior for this composition.     

Annealing effect on the structural and optical properties of a Cd1−xZnxS thin film for photovoltaic applications

Herein is a report of a study on a Cd_1−xZn_xS thin film grown on an ITO substrate using a chemical bath deposition technique. The as-deposited films were annealed in air at 400 °C for 30 min. The composition, surface morphology and structural properties of the as-deposited and annealed Cd_1−xZn_xS thin films were studied using EDX, SEM and X-ray diffraction techniques. The annealed films have been observed to possess a crystalline nature with a hexagonal structure. The optical absorption spectra were recorded within the range of 350-800 nm. The band gap of the as-deposited thin films varied from 2.46 to 2.62 eV, whereas in the annealed film these varied from 2.42 to 2.59 eV. The decreased band gap of the films after annealing was due to the improved crystalline nature of the material.     

Ab-initio investigations of structural, electronic, magnetic and optical properties of ferromagnetic Cd1-xMnxTe

We report ab-initio calculations of the structural, electronic, magnetic and optical properties of the alloy Cd_1-xMn_xTe as a function of the Mn concentration ‘x’. Ab-initio calculations are based on the density functional theory (DFT) within the generalized gradient approximation (GGA). The calculated lattice constants of the Cd_1-xMn_xTe alloys exhibit Vegard's law downward bowing parameter. For the minority spin channel the Fermi level shifts toward higher energy with the value of ‘x’ in Cd_1-xMn_xTe. The spin-exchange splitting energy Δ_x(d) increases with increasing ‘x’ in Cd_1-xMn_xTe and the values of p-d exchange splitting energy Δ_x(pd) of Cd_1-xMn_xTe show that the effective potential for the minority spin is more attractive than that for the majority spin. The values of exchange constants N₀α and N₀β obtained for Cd_1-xMn_xTe are in agreement with the reported data. The magnetic moment per Mn atom reduces from its free space charge value of 5μ_B to around 4μ_B due to p-d hybridization and this results into an appearance of small local magnetic moments on the non-magnetic Cd and Te sites. The absorption threshold shifts toward higher energy and the static refractive index decreases with the increasing value of ‘x’ in Cd_1-xMn_xTe.     

Giant exciton Faraday rotation in Cd1−xMnxTe mixed crystals

New semiconductor compound Cd_1?xMn_xTe exhibits strong Faraday rotation in the interband region. It is shown by measurements of magneto-optical Kerr effect and reflection in magnetic field that unusually large exciton Zeeman splitting plays an essential role in the observed Faraday rotation. A possible explanation of the observed splitting (corresponding to a “g factor” value up to 100) by exchange interaction of excitons with manganese d states is suggested.     

Structural and electrical characterization of SxSe100−x thin films

Thin films of samples of the glassy S_xSe_100−x system with 0 ≤ x ≤ 7.28 have been prepared by thermal evaporation technique at room temperature (300 K). X-ray investigations show that the structure of pure selenium (Se) does change seriously by the addition of small amount of sulphur S ≤7.28%. The lattice parameters were determined as a function of sulphur content. Results of differential thermal analysis (DTA) of the glassy compositions of the system S_xSe_100−x were discussed. The characteristic temperatures (T_g, T_c and T_m) were evaluated. Dark electrical resistivities, ρ, of S_xSe_100−x thin films with different thicknesses from 100 to 500 nm, were measured in the temperature range from 300 to 423 K. Two distinct linear parts with different activation energies were observed. The variation of electrical resistivity of examined compositions has been discussed as a function of the film thickness, temperature and the sulphur content. The application of Mott model for the phonon assisted hopping of small polarons gave the same two activation energies obtained from the resistivity temperature calculations.     

Preparation and magnetic properties of the conductive Co(1−x)NixFe2O4/polyaniline microsphere composites

Core-shell Co_(1−x)Ni_xFe₂O₄/polyaniline nanoparticles, where the core was Co_(1−x)Ni_xFe₂O₄ and the shell was polyaniline, were prepared by the combination of sol-gel process and in-situ polymerization methods. Nanoparticles were investigated by Fourier transform spectrometer, X-ray diffraction diffractometer, Scanning electron microscope, Differential thermal analysis and Superconductor quantum interference device. The results showed that the saturation magnetization of pure Co_(1−x)Ni_xFe₂O₄ nanoparticles were 57.57 emu/g, but Co_(1−x)Ni_xFe₂O₄/polyaniline composites were 37.36 emu/g. It was attributed to the lower content (15 wt%), smaller size and their uneven distribution of Co_(1−x)Ni_xFe₂O₄ nanoparticles in the final microsphere composites. Both Co_(1−x)Ni_xFe₂O₄ and PANI/Co_(1−x)Ni_xFe₂O₄ showed superparamagnetism.     

Nanoscratch behavior of Zn1−xCdxSe heteroepitaxial layers

This paper describes the nanoscratch behavior of Zn_1−xCd_xSe epilayers grown using molecular beam epitaxy (MBE). Transmission electron microscopy (TEM), scanning electron microscopy (SEM), and Hysitron Triboscope nanoindenter techniques were employed to determine the microstructures, morphologies, friction coefficients (μ), and hardnesses (H) of these materials, and thereby propose an explanation for their properties in terms of nanotribological behavior. Nanoscratch analysis revealed that the coefficient of friction of the Zn_1−xCd_xSe epilayer system decreased from 0.172 to 0.139 upon increasing the Cd content (x) from 0.07 to 0.34. Furthermore, studies of the scratch wear depth under a ramping load indicated that a higher Cd content provided the Zn_1−xCd_xSe epilayers with a higher shear resistance, which enhanced the strength of the CdSe bonds. These findings suggest that the greater stiffness of the CdSe bond, relative to that of the ZnSe bond, enhances the hardness of the epilayers. Indeed, the effect of the Cd content on the growth of the Zn_1−xCd_xSe epilayers is manifested in the resulting nanotribological behavior.     

Effect of substrate temperature on the morphology, structural and optical properties of Zn1−xCoxO thin films

Zn_1−xCo_xO thin films with c-axis preferred orientation were deposited on sapphire (0 0 0 1) by pulsed laser deposition (PLD) technique at different substrate temperatures in an oxygen-deficient ambient. The effect of substrate temperature on the microstructure, morphology and the optical properties of the Zn_1−xCo_xO thin films was studied by means of X-ray diffraction (XRD), atomic force microscopy (AFM), UV-visible-NIR spectrophotometer, fluorescence spectrophotometer. The results showed that the crystallization of the films was promoted as substrate temperature rose. The structure of the samples was not distorted by the Co incorporating into ZnO lattice. The surface roughness of all samples decreased as substrate temperature increased. The Co concentration in the film was higher than in the target. Emission peak near band edge emission of ZnO from the PL spectra of the all samples was quenched because the dopant complexes acted as non-radiative centers. While three emission bands located at 409 nm (3.03 eV), 496 nm (2.5 eV) and 513 nm (2.4 eV) were, respectively, observed from the PL spectra of the four samples. The three emission bands were in relation to Zn interstitials, Zn vacancies and the complex of V_O and Zn_i (V_OZn_i). The quantity of the Zn interstitials maintained invariable basically, while the quantity of the V_OZn_i slightly decreased as substrate temperature increased.     

Magnetic disorder induced enhanced magneto-resistance in La0.5Sr0.5Co1−xRuxO3

We observe a sharp increase in negative magneto-resistance ratio up to 40% for x=0.1, in La_0.5Sr_0.5Co_1−xRu_xO₃ which is due to the magnetic disorder induced by an anti-ferromagnetic interaction between Co and Ru ions. We also observe a metal to insulator and a ferromagnetic to anti-ferromagnetic transition for 0≤x≤0.3. Ruthenium (IV) ion disrupts an intermediate spin state of cobalt (Co³⁺:t_2g⁵e_g¹), forcing a double exchange mediated ferromagnetic state to an anti-ferromagnetic spin state for x≥0.2.     

The magnetic phase transitions and magnetocaloric effect in MnNi1−xCoxGe alloys

The magnetic phase transitions and the magnetocaloric effects in MnNi_1−xCo_xGe (x=0.38 and 0.40) alloys were investigated. The substitution of Co for Ni in the MnNiGe antiferromagnet results in the metamagnetic transitions from antiferromagnetic to ferromagnetic state, which associates with very small thermal and magnetic hystereses. Positive and negative values of magnetic entropy changes are exhibited around the metamagnetic transition temperature and Curie temperature, respectively. The relatively large refrigerant capacity in low magnetic field along with the good reversibility suggest that MnNi_1−xCo_xGe (x=0.38 and 0.40) alloys are potential candidates for magnetic refrigeration.     

Crystal structures of two variants for CuPtB-type ordering in strained CdxZn1−xTe epilayers

Two variants of CuPt_B-type orderings in strained Cd_xZn_1−xTe epilayers were investigated by using transmission electron microscopy (TEM) and selected area diffraction pattern (SADP) measurements. The TEM images on the Cd_0.15Zn_0.85Te epilayers depicted strong contrast modulations along the [110] direction, and the SADP images showed superstructure reflection spots corresponding to a CuPt_B-type ordering. Possible crystal structures for the two variants of CuPt_B-type ordering in the Cd_xZn_1−xTe epilayers, which were determined from the SADP images, are presented.     

Facile synthesis of thiol-stabilized CdSexTe1−x nanocrystals

CdSe_xTe_1−x nanocrystals (x=0.25, 0.40, 0.50, 0.60 and 0.75) were synthesized using thioglycerol as a stabilizing agent. The composition of the CdSe_xTe_1−x nanocrystals was precisely controlled by tuning the precursor (Se/Te) ratio. The structural, morphological and optical properties of the nanocrystals were analyzed using X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), diffused reflectance spectroscopy (DRS) and photoluminescence (PL) measurements. It is found that the Se/Te ratio significantly affects the properties of the resultant CdSe_xTe_1−x nanocrystals. XRD pattern of the CdSe_xTe_1−x nanocrystals revealed cubic, hexagonal and mixed phases depending on the ratio of Se:Te. Surface morphology of the CdSe_xTe_1−x nanocrystals showed nanoclusters of sizes ∼50 nm, with the adjacent cluster interlinking each other. DRS revealed the size dependence band gap energy prevailing in the CdSe_xTe_1−x nanocrystals from 1.52 to 2.66 eV due to the optical bowing effect. PL measurements exhibited band edge emission in the visible spectral region, and are red shifted with increase in Se concentration. The facile route employed in the present work to synthesis the CdSe_xTe_1−x nanocrystals in an aqueous medium is simple and controllable, and the strategy presented will be handy in preparing diverse semiconducting nanocrystals.     

Structural,optical, FTIR and photoluminescence properties of Zn0.96−xCo0.04CuxO (x=0.03, 0.04 and 0.05) nanopowders

Un-hydrogenated and hydrogenated Cu, Co co-doped ZnO (Zn_0.96−xCo_0.04Cu_xO, x=0.03, 0.04 and 0.05) nanopowders have been synthesized by co-precipitation method. The synthesized samples have been characterized by powder X-ray diffraction, energy dispersive X-ray spectra, UV–Visible spectrophotometer and Fourier transform infrared spectroscopy. The calculated average crystalline size increases from 37.3 to 50.6 nm for un-hydrogenated samples from x=0.03 to 0.05 and it changes from 29.4 to 34.9 nm for hydrogenated samples. The change in lattice parameters, micro-strain, a small shift of X-ray diffraction peaks towards lower angles and reduction in energy gap reveal the substitution of Cu²⁺ ions into Zn–Co–O lattice. The hydrogenation effect reduces the particle size and induces the more uniform distribution of particles than the un-hydrogenated samples which is confirmed by SEM micrographs. Photoluminescence spectra of Zn_0.96−xCo_0.04Cu_xO system shows that red shift in near band edge ultraviolet emission from 393 to 403 nm with suppressing intensity and a blue shift in green band emission from 537 to 529 nm with enhancing intensity confirms the substitution of Cu into the Zn–Co–O lattice.     

Nanoscale semiconductor Pb1−xSnxSe (x = 0.2) thin films synthesized by electrochemical atomic layer deposition

In this paper the fabrication and characterization of IV-VI semiconductor Pb_1−xSn_xSe (x = 0.2) thin films on gold substrate by electrochemical atomic layer deposition (EC-ALD) method at room temperature are reported. Cyclic voltammetry (CV) is used to determine approximate deposition potentials for each element. The amperometric I-t technique is used to fabricate the semiconductor alloy. The elements are deposited in the following sequence: (Se/Pb/Se/Pb/Se/Pb/Se/Pb/Se/Sn …), each period is formed using four ALD cycles of PbSe followed by one cycle of SnSe. Then the deposition manner above is cyclic repeated till a satisfactory film with expected thickness of Pb_1−xSn_xSe is obtained. The morphology of the deposit is observed by field emission scanning electron microscopy (FE-SEM). X-ray diffraction (XRD) pattern is used to study its crystalline structure; X-ray photoelectron spectroscopy (XPS) of the deposit indicates an approximate ratio 1.0:0.8:0.2 of Se, Pb and Sn, as the expected stoichiometry for the deposit. Open-circuit potential (OCP) studies indicate a good p-type property, and the good optical activity makes it suitable for fabricating a photoelectric switch.