Synthesis and magnetic properties of ferrites spinels MgxCu1−xFe2O4

Polycrystalline Mg_0.6Cu_0.4Fe₂O₄ ferrites have been prepared using solid-state reaction technique. Their structural and magnetic properties have been studied, using X-ray diffraction and magnetic measurements.Using mean field theory and high-temperature series expansions (HTSE), extrapolated with the padé approximants method, the magnetic properties of Mg_1−xCu_xFe₂O₄ have been studied. The nearest neighbor super-exchange interactions for intra-site and inter-site of the Mg_1−xCu_xFe₂O₄ ferrites spinels, in the range 0≤x≤1, have been computed using the probability approach, based on Mössbauer data. The Curie temperature T_c is calculated as a function of Mg concentration. The obtained theoretical results are in good agreement with experimental ones obtained by magnetic measurements.     

First-principles study of the electronic and magnetic properties of a Nickel-Zinc ferrite: ZnxNi1−xFe2O4

Using first-principles density functional theory within the generalized gradient approximation method, the effect of Zn doping on electronic and magnetic properties of NiFe₂O₄ ferrite spinel has been studied. The crystal structure of the compounds is assigned to a pseudocubic structure and the lattice constant increases as the Zn concentration increases. Our spin-polarized calculations give a half-metallic state for NiFe₂O₄ and a normal metal state for Zn_xNi_1−xFe₂O₄ (0<x≤0.5). Based on the magnetic properties calculations, it is found that the saturation magnetic moment enhances linearly with increase in the Zn content in NiFe₂O₄. The Zn doping in NiFe₂O₄ also induces strong ferrimagnetism since it decreases the magnetic moment of A-sites.     

Critical behaviour and magnetic properties of A-B spinel ZnxCu1−xFe2O4

Polycrystalline Zn_0.6Cu_0.4Fe₂O₄ ferrites have been prepared using a solid-state reaction technique. Their structural and magnetic properties have been studied, using X-ray diffraction and Mössbauer and magnetic measurements. These results have been compared to a more general theoretical study, on Zn_xCu_1−xFe₂O₄, based on mean field theory and high-temperature series expansions (HTSE), and extrapolated with the Padé approximant method. The nearest neighbour super-exchange interactions for the intra-site and the inter-site of Zn_xCu_1−xFe₂O₄ spinel ferrites, in the range 0≤x≤1, have been computed using the probability approach, based on Mössbauer data. The Curie temperature T_C is calculated as a function of Zn concentration. The theoretical results obtained are in good agreement with the experimental results obtained by magnetic measurements.     

Magnetic,electronic and structural properties of ZnxFe3−xO4

A series of samples Zn_xFe_3−xO₄ have been prepared by the chemical coprecipitation technique and characterized by X-ray diffraction (XRD), vibrating sample magnetometry (VSM) and X-ray photoelectron spectroscopy (XPS). XRD demonstrates all the samples of Zn_xFe_3−xO₄ have a spinel structure same as Fe₃O₄. The magnetic hysteresis loops of Zn_xFe_3−xO₄ obtained from VSM indicate that the saturation magnetization has a maximum when x is ∼1/3. The chemical states of Fe atoms and Zn atoms in zinc ferrites have been measured using XPS and Auger electron spectroscopy (AES). The Fe 2p core-level XPS spectra and Zn L₃M₄₅M₄₅ Auger peaks have been analyzed and the results have been discussed in correlation with the samples’ magnetic properties. These results suggest most of Zn atoms occupy the tetrahedral sites and a small amount of them occupy the octahedral sites.     

Magnetic and transport property studies of nanocrystalline ZnxFe3−xO4

The magnetic and transport properties of nanocrystalline Zn_xFe_3−xO₄ with x=0.0, 0.2, 0.4, 0.5, 0.6, 0.8 and 1.0, respectively, fabricated by the sol-gel method have been investigated. Large magnetoresistance (MR) was observed and found to be originated both from the tunneling of the spin-polarized electrons across the adjacent ferromagnetic grains and the scattering by the canted spins at the grain surface near the grain boundaries. It has been revealed that the MR for the Zn_xFe_3−xO₄ samples (x=0, 0.5 and 1.0) increases with the temperature decreasing from room temperature until a maximum is reached at around 55 K. Then a sharp drop occurs with the further decrease in temperature, regarded as a spin (cluster) glass transition. For the samples studied, a biggest low field (0.5 T) MR value of about 20% for x=0 at 55 K has been obtained. The mechanism of the MR behavior of the materials was discussed.     

Electrical and switching properties of NiAlxFe2−xO4 ferrites synthesized by chemical method

Nickel-aluminum ferrite system NiAl_xFe_2−xO₄ has been synthesized by wet chemical co-precipitation method. The samples were studied by means of X-ray diffraction, d.c. electrical resistivity, a.c. electrical resistivity, a.c. conductivity and switching properties. The XRD patterns confirm the cubic spinel structure for all the synthesized samples. The crystallite size calculated from XRD data which confirm the nano-size dimension of the prepared samples. Electrical properties such as a.c. and d.c. resistivities as function of temperature were studied for various Al substitution in nickel ferrite. The dielectric constant and dielectric loss tangent were also studied as a function of frequency. The dielectric constant follows the Maxwell-Wagner interfacial polarization. A.C. conductivity increases with increase in applied frequency. The d.c. resistivity decreases as temperature increases, which indicate that the sample have semi-conducting nature. Verwey hoping mechanism explains the observed variation in resistivity. The activation energy is derived from the temperature variation of resistivity. Electrical switching properties were studied as I-V measurements. The current controlled negative resistance type switching is observed in all the samples. The Al substitution in nickel ferrite decreases the required switching field.     

Structural and magnetic properties of sol-gel Co2xNi0.5−x Zn0.5−xFe2O4 thin films

Nanocrystalline Co_2xNi_0.5−xZn_0.5−xFe₂O₄ (x=0−0.5) thin films have been synthesized with various grain sizes by a sol-gel method on polycrystalline silicon substrates. The morphology as well as magnetic and microwave absorption properties of the films calcined at 1073 K were studied using X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, and vibrating sample magnetometry. All films were uniform without microcracks. The Co content in the Co-Ni-Zn films resulted in a grain size ranging from 15 to 32 nm while it ranged from 33 to 49 nm in the corresponding powders. Saturation and remnant magnetization increased with increase in grain size, while coercivity demonstrated a drop due to multidomain behavior of crystallites for a given value of x. Saturation magnetization increased and remnant magnetization had a maximum as a function of grain size independent of x. In turn, coercivity increased with x independent of grain size. Complex permittivity of the Co-Ni-Zn ferrite films was measured in the frequency range 2-15 GHz. The highest hysteretic heating rate in the temperature range 315-355 K was observed in CoFe₂O₄. The maximum absorption band shifted from 13 to 11 GHz as cobalt content increased from x=0.1 to 0.2.     

Structural and magnetic characteristics of Co1−xNix/2Srx/2Fe2O4 nanoparticles

Co_1−xNi_x/2Sr_x/2Fe₂O₄ (x=0–0.5 in steps of 0.1) ferrite nanoparticles have been synthesized at room temperature, without calcination, using a reverse micelle process. The site preference was determined by Mössbauer spectroscopy at 300 K. The hyperfine parameters were obtained, for the whole series of solid solutions. For the X≤0.20 samples, the spectra were fitted with two discrete sextets and for the X>0.20 samples, a magnetic hyperfine field distribution and a doublet were also imposed in the fit procedure. Hysteresis loops were measured using a superconducting quantum interference device magnetometer at 2 K and 300 K. The results indicate that the relative decrease in saturation magnetization of nanoparticles compared to the submicron particles could be attributed to a surface spin termination and disorder. Magnetic dynamics of the nanoparticles was studied by the measurement of ac magnetic susceptibility versus temperature at different frequencies and it is found that the results are well described by the Vogel–Fulcher model.     

Magnetic properties of magnetic Co1−xMgxFe2O4 spinel by HTSE method

Magnetic properties and exchange-coupling interactions of diluted magnetic spinels A_1−xA′_xB₂X₄, where A and B are magnetic ions, namely Co_1−xMg_xFe₂O₄, were investigated using the high-temperature series expansion method (HTSE) and the distribution method of magnetic cations in the range 0≤x≤1. The magnetic phase diagram and transition temperature versus dilution x were determined using the Padé approximants method along with HTSE. The critical exponent associated with the magnetic susceptibility γ was then deduced. The obtained results are in good agreement with experimental results and critical exponent values are consistent with those suggested by the universality hypothesis.     

Reentrant spin glass behavior and large initial permeability of Co0.5−xMnxZn0.5Fe2O4

A series of polycrystalline ferrites having nominal chemical composition Co_0.50−xMn_xZn_0.5Fe₂O₄ (0<x<0.4) have been synthesized by the solid-state reaction technique. The XRD analysis confirms single phase cubic spinel structure for all compositions. Lattice constant increases from 0.84195 to 0.84429 nm with the increasing Mn content and obeys Vegard's law. The average grain size increases by increasing both Mn content and sintering temperatures. Room temperature saturation magnetization increases for x=0.1 and decreases for increasing Mn content. The coercivity decreases with increasing Mn content due to the decrease of anisotropy constant. A reentrant spin glass behavior of these samples is observed from the zero field cooled magnetization measurements. The real part of the initial permeability increases by increasing both Mn content and sintering temperatures. This is due to the homogeneous grain growth and densification of the ferrites. The highest initial permeability 137 is observed for x=0.4 sintered at 1573 K on the other hand, the highest relative quality factor (2522) is obtained for the sample Co_0.2Mn_0.3Zn_0.5Fe₂O₄ sintered at 1523 K. The Mn substituted Co_0.50−xMn_xZn_0.5Fe₂O₄ ferrites showed improved magnetic properties.     

Structural and magnetic properties of MnxCo1−xFe2O4 ferrite nanoparticles

We report on the structural and magnetic properties of nanoparticles of Mn_xCo_1−xFe₂O₄ (x=0.1, 0.5) ferrites produced by the glycothermal reaction. From the analysis of XRD spectra and TEM micrographs, particle sizes of the samples have been found to be about 8 nm (for x=0.1) and 13 nm (for x=0.5). The samples were characterized by DC magnetization in the temperature range 5-380 K and in magnetic fields of up to 40 kOe using a SQUID magnetometer. Mössbauer spectroscopy results show that the sample with higher Mn content has enhanced hyperfine fields after thermal annealing at 700 °C. There is a corresponding small reduction in hyperfine fields for the sample with lower Mn content. The variations of saturation magnetization, remnant magnetization and coercive fields as functions of temperature are also presented. Our results show evidence of superparamagnetic behaviour associated with the nanosized particles. Particle sizes appear to be critical in explaining the observed properties.     

Effect of cation distribution on the properties of Mn0.2ZnxNi0.8−xFe2O4

Mn_0.2Zn_xNi_0.8−xFe₂O₄ (x=0.2, 0.3, 0.4, 0.5, 0.6) are synthesized by the citrate precursor method. Effects of zinc substitution on DC resistivity, dielectric relaxation intensity, initial permeability, saturation magnetization and Curie temperature have been investigated. It is observed that resistivity increases with increase in zinc concentration up to x=0.5 and then decreases. The observed behaviour is explained in terms of hopping and site preference of ions in the lattice. The main contribution to dielectric relaxation intensity is observed to be due to space charge polarization. Initial permeability is observed to increase with increase in zinc concentration. Saturation magnetization increases up to x=0.4 and then starts decreasing. Canting effect is observed for higher zinc concentrations.     

Magnetic properties of Mn-rich Rh2Mn1+xSn1−x Heusler alloys

X-ray powder diffraction and magnetization measurements have been carried out on Rh₂Mn_1+xSn_1−x (0≤x≤0.3) alloys. The alloys, which crystallize in the L2₁ structure, were found to exhibit ferromagnetic behavior. The lattice constant a at room temperature decreases with increasing x, whereas the Curie temperature T_C decreases linearly. At 5 K the magnetic moment per formula unit first increases with increasing x and then saturates for x≥0.2. The experimental results are discussed in terms of the influence of the Mn-Mn exchange interactions between the Mn atoms on the Sn and Mn sites.     

Effect of Li substitution on the magnetic properties of LixMg0.40Ni0.60−2xFe2+xO4 ferrites

Structural and magnetic properties of a series of polycrystalline spinel type ferrites with the nominal chemical composition Li_xMg_0.40Ni_0.60−2xFe_2+xO₄, where x=0.0-0.3 in steps of 0.05, were investigated thoroughly. The formation of spinel structure was confirmed by X-ray diffraction analysis. Lattice constants and average grain diameters increased with increase in Li content. The real part of the initial permeability (μ^/_i) is found to increase not only with increase in Li content up to x=0.25 but also with the increase in sintering temperature up to 1100 °C. However, it decreases for further increase in sintering temperature except for x=0 and 0.05 compositions. The grain size dependent μ^/_i is also observed clearly in this research. From the magnetization as a function of applied magnetic field plots, it is clear that all samples exhibit ferrimagnetic state at room temperature and have a low saturation field. The magnetization obtained is explained with the help of redistribution of cations in the tetrahedral and octahedral sites and spin canting due to weakening of exchange interaction.     

Magnetic and magnetocaloric properties of Gd1−xScxNi2 solid solutions

Magnetic and heat capacity measurements have been carried out on the polycrystalline Gd_1−xSc_xNi₂ solid solutions (0≤x≤1), which crystallize in the cubic C15 Laves phases superstructure (space group F4?3m). These solid solutions are ferromagnetic with a Curie temperature below 76 K. Their Curie temperature decreases from 75.4 K for GdNi₂ to 13.6 K for Gd_0.2Sc_0.8Ni₂. At high temperatures, all solid solutions, except ScNi₂, are Curie-Weiss paramagnets. The Debye temperature as well as phonon, conduction electron and magnetic contributions to the heat capacity have been determined from heat capacity measurements. The magnetocaloric effect has been estimated both in terms of isothermal magnetic entropy change and adiabatic temperature change for selected solid solutions in magnetic fields up to 3 T.     

Magnetic phase diagram of Tb3−xHoxCu4Sn4 system

Magnetic phase diagram of Tb_3−xHo_xCu₄Sn₄ was determined on the basis of magnetic and heat capacity data. X-ray diffraction data proved that these compounds crystallize in the orthorhombic Gd₃Cu₄Ge₄-type structure. The compounds are antiferromagnets at low temperatures and the reciprocal magnetic susceptibility obeys the Curie-Weiss law. The paramagnetic Curie temperatures are negative and their absolute values decrease with increasing Ho content. An anomalous concentration dependence of the Néel temperature is observed.     

Magnetic properties of the Lu2Fe17−xMnx single crystals

Magnetic properties of the single-crystalline Lu₂Fe_17−xMn_x compounds, in which x=0, 0.5, and 2, with the Th₂Ni₁₇-type crystal structure are reported. The Lu₂Fe_17−xMn_x compounds with x=0 and 0.5 are ferromagnets at low temperatures and antiferromagnets at high temperatures. The compound with x=2 is always a ferromagnet. The easy-plane magnetic anisotropy in the Lu₂Fe_17−xMn_x ferromagnets drastically weakens with increase in Mn content up to x=2. The temperature dependence of the first magnetic anisotropy constant was obtained and compared with the single-ion model prediction.     

Enhanced ferroelectric, magnetic and magnetoelectric properties of Bi1−xCaxFe1−xTixO3 solid solutions

We report on the enhanced electromechanical, magnetic and magnetoelectric properties of Bi_1−xCa_xFe_1−xTi_xO₃ solid solutions. The crystal structure of the x≈0.25 compounds are close to the rhombohedral-orthorhombic phase boundary, and the solid solutions are characterized by increased electromechanical properties due to the polarization extension near the polar-nonpolar border. The homogenous weakly ferromagnetic state is established at x>0.15 doping. The chemical doping shifts the magnetic transition close to room temperature, thus enlarging the magnetic susceptibility of the compounds. The solid solutions at the morphotropic phase boundary exhibit a nearly twofold increase in piezoelectric response, whereas the magnetoelectric coupling shows five times enhancement in comparison with the parent bismuth ferrite.     

Luminescent properties of HTP AgGd1−xW2O8:Eux and AgGd1−x(W1−yMoy)2O8:Eux phosphor for white LED

Intense red phosphors, AgGd_1−xEu_x(W_1−yMo_y)₂O₈ (x=0.0-1.0, y=0.0-1.0), have been synthesized through traditional solid-state reaction and characterized by X-ray diffraction (XRD) and photoluminescence (PL). XRD results reveal that AgGd_1−xEu_xW₂O₈ synthesized at 1000 °C has a tetragonal crystal structure, which is named as high temperature phase (HTP) AgGdW₂O₈. All phosphors compositions with Eu³⁺ show red and green emission on excitation either in the charge-transfer or Eu³⁺ levels. Analysis of the emission spectra with different Eu³⁺ concentrations reveal that the optimum dopant concentration for Eu³⁺ is x=0.6 in the HTP AgGd_1−xEu_xW₂O₈ (x=0.0-1.0). Studies on the AgGd_0.4Eu_0.6(W_1−yMo_y)₂O₈ (y=0.0-1.0) and AgGd_1−xEu_x(W_0.7Mo_0.3)₂O₈ (x=0.0-1.0) show that the emission intensity is maximum for compositions with y=0.3 and x=0.5, respectively, and a decrease in emission intensity is observed for higher y or x values. The Mo⁶⁺ and Eu³⁺ co-doped AgGd(WO₄)₂ phosphors show higher emission intensity in comparison with the singly Eu³⁺-doped AgGd(WO₄)₂ in UV region. The intense emission of the tungstate/molybdate phosphors under 394 and 465 nm excitations, respectively, suggests that these materials are promising candidates as red-emitting phosphors for near-UV/blue GaN-based white LED for white light generation.     

Structure and magnetic properties of Sn1−xMnxO2

The microstructure and magnetic properties have been investigated systematically for Sn_1−xMn_xO₂ polycrystalline powder samples with x=0.02-0.08 synthesized by a solid-state reaction method. X-ray diffraction revealed that all samples are pure rutile-type tetragonal phase and the cell parameters a and c decrease monotonously with the increase in Mn content, which indicated that Mn ions substitute into the lattice of SnO₂. Magnetic measurements revealed that all samples exhibit room temperature ferromagnetism. Furthermore, magnetic investigations demonstrate that magnetic properties strongly depend on doping content, x. The average magnetic moment per Mn atom decreases with increase in the Mn content, because antiferromagnetic super-exchange interaction takes place within the neighbor Mn³⁺ ions through O²⁻ ions for the samples with higher Mn doping. Our results indicate that the ferromagnetic property is intrinsic to the SnO₂ system and is not a result of any secondary magnetic phase or cluster formation.