Viscometric characterization of cobalt nanoparticle-based magnetorheological fluids using genetic algorithms

The rheological flow curves (shear stress vs. shear rate) of a nanoparticle cobalt-based magnetorheological fluid can be modeled using Bingham-plastic and Herschel–Bulkley constitutive models. Steady-state rheological flow curves were measured using a parallel disk rheometer for constant shear rates as a function of applied magnetic field. Genetic algorithms were used to identify constitutive model parameters from the flow curve data.     

基于MHD的磁射流抛光中流场的分析与模拟

从理论上分析了磁射流抛光中的磁场与流场的相互作用,构建了磁射流抛光的冲击射流模型,基于磁流体动力学对磁射流抛光过程的紊动冲击射流进行数值模拟,得到了磁射流抛光过程的连续流场和射流在工件壁面上的压力、速度、紊动强度分布。通过比较射流抛光和磁射流抛光的数值计算结果,分析了磁流变效应对射流稳定性的影响,从射流的流场、速度、紊动强度等方面分析射流在磁场中稳定的原因。     

MHD flow study of viscous fluid through a complex wavy curved surface due to biomimetic propulsion under porosity and second-order slip effects

The steady laminar flow of viscous fluid from a curved porous domain under a radial magnetic field is considered. The fluid flow by a curved domain is due to peristaltic waves present at the boundary walls. The whole analysis is based on porosity(Darcy number) effects. Moreover, the effects of second-order slip on the rheology analysis are also discussed. Due to the complex nature of the flow regime, we have governed the rheological equations by using curvilinear coordinates in the fixed frame. The physical influence of magnetic(Hartmann number) and porosity(Darcy number)parameters on the rheological features of peristaltic transportation are argued in detailed(in the wave frame). Additionally, in the current study, the complex wavy pattern on both boundary walls of the channel is used. The whole rheological study is based on ancient, but medically valid,assumptions of creeping phenomena and long wavelength assumptions. Analytical solutions of the governing equations are obtained by using the simple integration technique in Mathematica software 11.0. The core motivation of the present analysis is to perceive the physical influence of embedded parameters, such as the dimensionless radius of the curvature parameter, magnetic parameter, porosity parameter, different amplitude ratios of complex peristaltic waves, first-and second-order slip parameters, on the axial velocity, pressure gradient, local wall shear stress,tangential component of the extra-stress tensor, pumping and trapping phenomena.     

Kinetics of internal structures growth in magnetic suspensions

The kinetics of aggregation of non Brownian magnetizable particles in the presence of a magnetic field is studied both theoretically and by means of computer simulations. A theoretical approach is based on a system of Smoluchowski equations for the distribution function of the number of particles in linear chain-like aggregates. Results obtained in the two dimensional (2D) and three dimensional (3D) models are analyzed in relation with the size of the cell, containing the particles, and the particle volume fraction φ$\phi$. The theoretical model reproduces the change of the aggregation kinetics with the size of the cell and with the particle volume fraction as long as the lateral aggregation of chains is negligible.     

Behavior of a free surface of a magnetic fluid containing a magnetizable cylinder

The deformation of the free surface of a magnetic fluid containing a cylinder made of a magnetizable material subjected to a uniform applied magnetic field is analyzed. The statics and dynamics of a magnetic fluid free surface is studied theoretically and experimentally. A discontinuous (jump-like) change of the surface shape is shown to occur when the applied magnetic field gradually increases or decreases. If the applied magnetic field increases and then decreases, a hysteresis of the shape is observed.     

Vibration analysis of a partially treated multi-layer beam with magnetorheological fluid

Semi-active vibration control based on magnetorheological (MR) materials offers excellent potential for high bandwidth control through rapid variations in the rheological properties of the fluid under varying magnetic field. Such fluids may be conveniently applied to partial or more critical components of a large structure to realize more efficient and compact vibration control mechanism with variable damping. This study investigates the properties and vibration responses of a partially treated multi-layer MR fluid beam. The governing equations of a partially treated multi-layered MR beam are formulated using finite element method and Ritz formulation. The validity of the proposed finite element formulations is demonstrated by comparing the results with those obtained from the Ritz formulation and the experimental measurements. The properties of different configurations of a partially treated MR-fluid beam are evaluated to investigate the influences of the location and length of the MR-fluid for different boundary conditions. The properties in terms of natural frequencies and loss factors corresponding to various modes are evaluated under different magnetic field intensities and compared with those of the fully treated beams. The effect of location of the fluid treatment on deflection mode shapes is also investigated. The forced vibration responses of the various configurations of partially treated MR sandwich beam are also evaluated under harmonic force excitations. The results suggest that the natural frequencies and transverse displacement response of the partially treated MR beams are strongly influenced not only by the intensity of the applied magnetic field, but also by the location and the length of the fluid pocket. The application of partial treatment could also alter the deflection pattern of the beam, particularly the location of the peak deflection.     

Synthesis and rheological properties of an iron oxide ferrofluid

A ferrofluid (FF) was synthesized in air using a co-precipitation method. Some rheological properties and magnetoviscous effects of this sample were studied. X-ray diffraction (XRD) and transmission electron microscopy (TEM) were used for characterization of the solid particles, and the rheological properties were investigated with a special rheometer with variable magnetic field. Magnetic particles with mean particle size of 10.6 nm were obtained. Rheological results show that the shear thinning behavior in the absence and presence of magnetic field is different from that based fluid behavior. Moreover, contrary to expectation, the magnetoviscous effect showed an initial increase at low shear rates (near 15 s⁻¹) and decrease at higher shear rates. The rheological properties of FF depend on the rearrangement of nanoparticles. In addition, time is an effective factor in the formation and destruction of magnetically induced structures.     

Experimental results on a hydrostatic bearing lubricated with a magnetorheological fluid

Magnetorheological fluids can be used as a smart lubricant as a result of the fact that its properties can be changed with the use of a magnetic field. Local flow resistance and local pressure can be generated by applying a local magnetic field. This work presents a hydrostatic bearing in which the pressure profile of a conventional hydrostatic bearing is recreated with solely the use of a magnetic field and a magnetorheological fluid. The magnetic field is applied only locally at the outer edges of the bearing with the use of an electromagnet. The principle is demonstrated with the use of an experimental setup and a model from literature.     

轻质磁性材料的制备及在磁流变液中的应用

研究了使用化学镀的方法在轻质载体上包覆具有磁性的镍、钴等物质。该材料具有密度低的优点（有效密度为2-3g/cm^3）。对比于几种羰基镍粉制备的磁流变液的沉降稳定性,使用该轻质磁性材料制备的磁流变液不用加防沉剂,其稳定性类似于加入较多防沉剂的羟基镍粉磁流变液。其在磁场下表观粘度比零磁场下的粘度有几十倍的变化。因此,使用该轻质磁性材料有望解决磁流变液普遍存在的沉降问题,得到综合性能良好的产品。     

On the influence of a horizontal magnetic field on the Rosensweig instability of a nonlinear magnetizable ferrofluid

The Rosensweig instability induced by magnetic forces of the flat free surface of the layer of a stationary nonlinearly magnetizable ferrofluid is considered. The fluid covers a horizontal plate of a nonmagnetic material, located in a tilted magnetic field. The critical value of the vertical component of the magnetization vector is calculated in the linear formulation for a deep magnetic fluid for any physically admissible magnetization law. The influence of the horizontal component of the applied magnetic field on the onset of instability upon the modified Langevin magnetization is analyzed.     

Stability of hydromagnetic Dean flow between two arbitrarily spaced concentric circular cylinders in the presence of a uniform axial magnetic field

The effect of a uniform axial magnetic field on the stability of the flow of an incompressible viscous electrically conducting fluid between two arbitrarily spaced concentric circular cylinders driven by a constant azimuthal pressure gradient is studied. The linearized stability equations for steady axisymmetric disturbances form an eigenvalue problem, which are solved by using a classical Runge–Kutta scheme combined with a shooting method, termed unit disturbance method. It is observed that for fixed gap width, the magnetic field has a stabilizing influence on the flow for both perfectly conducting and nonconducting walls. It is also found that for a given value of magnetic parameter, stabilization is more as the gap width increases. Further the electrically nonconducting walls are found to be more destabilizing than the perfectly conducting walls. The critical value of the radii ratio (0<η<1) beyond which the first unstable mode becomes nonaxisymmetric is determined for various values of the magnetic parameter.     

Free convection effects and radiative heat transfer in MHD Stokes problem for the flow of dusty conducting fluid through porous medium

The present note deals with the effects of radiative heat transfer and free convection in MHD for a flow of an electrically conducting, incompressible, dusty viscous fluid past an impulsively started vertical non-conducting plate, under the influence of transversely applied magnetic field. The heat due to viscous dissipation and induced magnetic field is assumed to be negligible. The governing linear partial differential equations are solved by finite difference technique. The effects of various parameters (like radiation parameter N, Prandtl number Pr, porosity parameter K) entering into the MHD Stokes problem for flow of dusty conducting fluid have been examined on the temperature field and velocity profile for both the dusty fluid and dust particles.     

Experimental study and CFD simulation of rotational eccentric cylinder in a magnetorheological fluid

In this study, a magnetorheological (MR) fluid is prepared using carbonyl iron filings and low viscosity lubricating oil. The effects of magnetic field and weight percentage of particles on the viscosity of the MR fluid have been measured using a rotational viscometer. The yield stress under an applied magnetic field was also obtained experimentally. In the absence of an applied magnetic field, the MR fluid behaves as a Newtonian fluid. When the magnetic field is applied, the MR fluid behaves like Bingham plastics with a magnetic field dependent yield stress. Afterward, the results compared with those of CFD simulation of two eccentric cylinders in the MR fluid. Results show that the influences of MR effects, caused by the applied magnetic field, on the model characteristics are significant and not negligible. The viscosity is enhanced by increasing of the magnetic field, eccentricity ratio and weight percentage of suspensions. The MR effects and increasing of weight percentage and eccentricity ratio also provide an enhancement in the yield stresses and required total torque for rotation of inner cylinder. Also the simulation results indicate a good representation of the experiment by the model.     

Experimental investigation of magneto-rheological droplet impact on a smooth surface

We present an experimental investigation of the impact of magneto-rheological droplets on a smooth surface. The experimental setup consists of a syringe pump with capillary tube of 1.6 mm diameter located perpendicularly above a dry smooth quartz surface assembled above an electromagnetic module, which enables magnetic flux density control up to 7.8 G. Free surface flow patterns generated during the impact of droplets of 2.2 mm diameter, Reynolds number in the range 15-125 were recorded using a digital high-speed camera. The materials used in this study were commercial ferro-fluids, (hydrocarbon-based fluid containing micron-sized magnetizable particles). These fluids were characterized using a rotational rheometer modified by an electromagnetic module. The results show an up to 40% reduction in maximum spread diameters as well as reductions in spread velocities for droplets subjected to a magnetic field.     

Ultrasonic velocity and amplitude characterization of magnetorheological fluids under magnetic fields

Variations in velocity of sound and amplitude of the signal of a commercial magnetorheological fluid under different magnetic fields are studied experimentally. Different factors such as orientation, uniformity, geometry and intensity of the magnetic field are investigated. An increase in the change of MR fluid acoustical properties is obtained when the magnetic field intensity is risen. In addition, these properties show an opposite behavior when a magnetic field is applied parallel or perpendicular to the ultrasound propagation. Experiments using an electromagnet and permanent magnets as the source of magnetic field are also compared. Properties such as anisotropy in sound velocity and amplitude make these materials interesting regarding applications.     

Preparation of superparamagnetic Fe3O4/PMMA nano composites and their magnetorheological characteristics

Fe₃O₄/PMMA composite particles were fabricated by a simple one-pot hydrothermal method. The magnetic measurement showed that the composite particles displayed a higher saturated magnetization and superparamagnetic property. The rheological properties of the magnetorheological fluids (MRFs) based on Fe₃O₄/PMMA particles were measured on a rotational rheometer with a magnetic field generator. It was found that the MRFs exhibited better MR effect and sendimentary stability than the similar materials.     

Rossby waves in the magnetic fluid dynamics of a rotating plasma in the shallow-water approximation

We have studied rotating magnetohydrodynamic flows of a thin layer of astrophysical plasma with a free boundary in the β-plane. Nonlinear interactions of the Rossby waves have been analyzed in the shallow-water approximation based on the averaging of the initial equations of the magnetic fluid dynamics of the plasma over the depth. The shallow-water magnetohydrodynamic equations have been generalized to the case of a plasma layer in an external vertical magnetic field. We have considered two types of the flow, viz., the flow in an external vertical magnetic field and the flow in the presence of a horizontal magnetic field. Qualitative analysis of the dispersion curves shows the presence of three-wave nonlinear interactions of the magnetic Rossby waves in both cases. In the particular case of zero external magnetic field, the wave dynamics in the layer of a plasma is analogous to the wave dynamics in a neutral fluid. The asymptotic method of multiscale expansions has been used for deriving the nonlinear equations of interaction in an external vertical magnetic field for slowly varying amplitudes, which describe three-wave interactions in a vertical external magnetic field as well as three-wave interactions of waves in a horizontal magnetic field. It is shown that decay instabilities and parametric wave amplification mechanisms exist in each case under investigation. The instability increments and the parametric gain coefficients have been determined for the relevant processes.     

Heat transfer in MHD flow of dusty viscoelastic (Walters’ liquid model-B) stratified fluid in porous medium under variable viscosity

The paper investigates the effects of heat transfer in MHD flow of viscoelastic stratified fluid in porous medium on a parallel plate channel inclined at an angle θ. A laminar convection flow for incompressible conducting fluid is considered. It is assumed that the plates are kept at different temperatures which decay with time. The partial differential equations governing the flow are solved by perturbation technique. Expressions for the velocity of fluid and particle phases, temperature field, Nusselt number, skin friction and flow flux are obtained within the channel. The effects of various parameters like stratification factor, magnetic field parameter, Prandtl number on temperature field, heat transfer, skin friction, flow flux, velocity for both the fluid and particle phases are displayed through graphs and discussed numerically.     

Numerical investigation of subcooled boiling characteristics of magnetic nanofluid under the effect of quadrupole magnetic field

This paper investigates numerically the characteristics of subcooled flow boiling of a magnetic nanofluid (refrigerant-113 and 4 vol% Fe₃O₄) in a vertical annulus, which is exposed to a nonuniform transverse magnetic field generated by the quadrupole magnet. A control volume technique and SIMPLEC algorithm have been used for discretizing the governing equations and pressure-velocity coupling, respectively. The two-fluid model has been used to simulate subcooled flow boiling of the refrigerant-113. The results indicate that subcooled flow boiling characteristics change not only by using nanofluid as the working fluid, but also by applying the nonuniform transverse magnetic field. In the presence of the aforementioned magnetic field due to the Kelvin force, the fluid attracted to the outer wall. This leads to higher bubble detachment frequency so that the heat pumping is increased and the void fraction on the heated wall is decreased. Thus, the critical heat flux as one of the most important parameters in boiling processes will be increased.     

Analysis of magnetic drug carrier particle capture by a magnetizable intravascular stent—2: Parametric study with multi-wire two-dimensional model

A 2-D mathematical model was developed and used to examine the capture of magnetic drug carrier particles (MDCPs) by a magnetizable intravascular stent (MIS). The roles of both non-stent system parameters, i.e., the blood flow rate, magnetic field strength and direction and MDCP properties, and stent design parameters, i.e., the MIS radius, its wire radius, number of MIS loops, interwire loop spacing and MIS ferromagnetic material were evaluated over a wide range of plausible conditions. The results showed that the MIS could be a very effective magnetic drug targeting tool with many possible applications.