The influence of Nd-Co substitution on the magnetic properties of non-stoichiometric strontium hexaferrite nanoparticles

Non-stoichiometric Nd-Co substituted hexaferrites of composition Sr_1−xNd_xFe_12(1−x)Co_xO₁₉ (x=0-0.4) were prepared by the self-propagating combustion method and subsequent heat treatments. Structural characterization of samples showed that the M-type hexagonal structure can be maintained for substitutions x<0.4 without the segregation of secondary phases on samples calcined at 1100 °C. The crystallites sizes range between 50 and 70 nm. Mössbauer spectroscopy results indicate that the iron vacancies are not evenly distributed over the lattice and that Co/Fe substitution mainly takes place in site 4f2. Magnetic measurements reveal that values of saturation magnetization M_S increased from 72 to 76 Am²/kg (x=0-0.2), while coercivity H_c increased from 26.40 to 58.70 A/m (x=0-0.3). Nd-Co substitutions enhance magnetic properties in deficient iron Sr hexaferrites.     

Magnetic and Microwave Absorbing Properties of Electrospun Ba(1−x)LaxFe12O19 Nanofibers

Ba_(1−x)La_xFe₁₂O₁₉ (0.00≤x≤0.10) nanofibers were fabricated via the electrospinning technique followed by heat treatment at different temperatures for 2 h. Various characterization methods including scanning electron microscopy (SEM), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and microwave vector network analyzer were employed to investigate the morphologies, crystalline phases, magnetic properties, and complex electromagnetic parameters of nanofibers. The SEM images indicate that samples with various values of x are of a continuous fiber-like morphology with an average diameter of 110±20 nm. The XRD patterns show that the main phase is M-type barium hexaferrite without other impurity phases when calcined at 1100 °C. The VSM results show that coercive force (H_c) decreases first and then increases, while saturation magnetization (M_s) reveals an increase at first and then decreases with La³⁺ ions content increase. Both the magnetic and dielectric losses are significantly enhanced by partial substitution of La³⁺ for Ba²⁺ in the M-type barium hexaferrites. The microwave absorption performance of Ba_0.95La_0.05Fe₁₂O₁₉ nanofibers gets significant improvement: The bandwidth below −10 dB expands from 0 GHz to 12.6 GHz, and the peak value of reflection loss decreases from −9.65 dB to −23.02 dB with the layer thickness of 2.0 mm.     

Preparation and magnetic properties of La-Mn and La-Co doped barium hexaferrites prepared via an improved co-precipitation/molten salt method

La-Mn and La-Co doped barium hexaferrites of formula Ba_(1−x)La_xFe_(12−x)M_xO₁₉ (M=Mn, Co) (x=0.05 to 0.40) were prepared with an improved co-precipitation/molten salt method. For the synthesis, aqueous solutions of the appropriate metal chlorides were prepared in the ratio required except that the initial mole ratio of Fe and dopants to Ba was chosen to be 11:1, and then mixed with excess Na₂CO₃. The solutions were then cooled, filtered off, dried, then mixed with KCl flux, and heated at 450 °C and for 2 h. The temperature was then raised to 950 °C and kept for 4 h, then cooled. This new synthesis method, which employs a lower temperature and shorter reaction time, gives products with improved crystallinity and purity while the saturation magnetization and coercivity values are comparable with those synthesized via the high temperature method.     

Magnetic properties of nanocrystalline Co1−xZnxFe2O4 prepared by forced hydrolysis method

Nanocrystalline zinc-substituted cobalt ferrite powders, Co_1−xZn_xFe₂O₄ (x=0, 0.2, 0.4), were for the first time prepared by forced hydrolysis method. Magnetic and structural properties in these specimens were investigated. The average crystallite size is about 3.0 nm. When the zinc substitution increases from x=0 to x=0.4, at 4.2 K, the saturation magnetization increases from 72.1 to 99.7 emu/g and the coercive field decreases from 1.22 to 0.71 T. All samples are superparamagnetic at room temperature and ferrimagnetic at temperatures below the blocking temperature. The high value of the saturation magnetization and the very thin thickness of the disorder surface layer of all samples suggests that this forced hydrolysis method is suitable not only for preparing two metal element systems but also for three or more ones.     

Magnetic and microwave absorption properties of BaFe12−x (Mn0.5Cu0.5Zr)x/2O19 synthesized by sol–gel processing

BaFe_12−x (Mn_0.5Cu_0.5Zr)_x/2O₁₉ hexaferrites with x=1, 2 and 3 were prepared by sol–gel process. The ferrite powders possess hexagonal shape and are well separated from one another. The powders of these ferrites were mixed with polyvinylchloride (PVC) plasticizer to be converted into a microwave absorbing composite ferrite with a thickness of 1.8 mm. X-ray diffractometer (XRD), scanning electron microscope (SEM), ac susceptometer, vibrating sample magnetometer and vector network analyzer were used to analyze its structure, electromagnetic and microwave absorption properties. The results showed that magnetoplumbite structures for all samples were formed. The sample with higher magnetic susceptibility and coercivity exhibits a larger microwave absorbing ability. Also the present investigation demonstrates that a microwave absorber using BaFe_12−x(Mn_0.5Cu_0.5Zr)_x/2O₁₉ (x=2 and 3)/PVC with a matching thickness of 1.8 mm can be fabricated for applications over 15 GHz, with reflection loss more than −25 dB for specific frequencies, by controlling the molar ratio of the substituted ions.     

Magnetic properties and formation of Sr ferrite nanoparticle and Zn,Ti/Ir substituted phases

Strontium hexaferrite nanoparticles are prepared by the chemical sol–gel route. Specific saturation magnetization σ_s and coercive field strength H_c are determined depending on the heat treatment of the gel and iron/strontium ratio in the starting solution. These ultrafine powders with single-domain behavior have specific saturation magnetization σ_s=74 emu/g and coercive field strength H_c=6.4 kOe. Experimental results show that it is necessary to preheat the gel between 400 and 500°C for several hours . It can prevent the formation of intermediate γ-Fe₂O₃ and help to obtain ultrafine strontium ferrite single phase with narrow size distribution at a low annealing temperature. Additionally, the magnetic properties of sol–gel derived strontium ferrite with iron substituted by Zn²⁺, Ti⁴⁺ and Ir⁴⁺ are discussed. For an amount of substitution 0<x⩽0.6, the (Zn, Ti)_x substituted strontium ferrite shows higher values of both coercive field strength and saturation magnetization than the (Zn, Ir)_x substituted phase.     

Analysis of magnetic disaccommodation in La-Co-substituted strontium ferrites

M-type strontium ferrites substituted by La³⁺-Co²⁺(Sr_1−xLa_xFe_12−xCo_xO₁₉) were prepared by ceramic process. Effects of the substituted amount of La³⁺ and Co²⁺ on structure and magnetic properties of Sr_1−xLa_xFe_12−xCo_xO₁₉ compounds have systematically been investigated by X-ray diffraction (XRD), vibrating sample magnetometer (VSM) and magnetic disaccommodation. In the measurement range from 80 to 500 K, the magnetic disaccommodation is represented by means of isochronal curves. It is well known that magnetic disaccommodation cannot be obviously found in the M-type of pure strontium ferrites. However, three peaks were observed in Sr_1−xLa_xFe_12−xCo_xO₁₉, and this behavior is explained in terms of the presence of Fe²⁺ cation and to the site occupation by the magnetic Co²⁺ ionic within the hexagonal structure.     

Effect of annealing temperature on the structural, photoluminescence and magnetic properties of sol-gel derived Magnetoplumbite-type (M-type) hexagonal strontium ferrite

Magnetoplumbite-type (M-type) hexagonal strontium ferrite particles were synthesized via sol-gel technique employing ethylene glycol as the gel precursor at two different calcination temperatures (800 and 1000 °C). Structural properties were systematically investigated via X-ray diffraction (XRD), field emission scanning electron microscopy, high resolution transmission electron microscopy (HRTEM), energy dispersive spectroscopy (EDS), thermogravimetric analysis (TGA), photoluminescence spectrophotometry and superconducting quantum interference device magnetometer. XRD results showed that the sample synthesized at 1000 °C was of single-phase with a space group of P6₃/mmc and lattice cell parameter values of a=5.882 Å and c=23.048 Å. EDS confirmed the composition of strontium ferrite calcined at 1000 °C being mainly of M-type SrFe₁₂O₁₉ with HRTEM micrographs confirming the ferrites exhibiting M-type long range ordering along the c-axis of the crystal structure. The photoluminescence (PL) property of strontium ferrite was examined at excitation wavelengths of 260 and 270 nm with significant PL emission peaks centered at 350 nm being detected. Strontium ferrite annealed at higher temperature (1000 °C) was found to have grown into larger particle size, having higher content of oxygen vacancies and exhibited 83-85% more intense PL. Both the as-prepared strontium ferrites exhibited significant oxygen vacancies defect structures, which were verified via TGA. Higher calcination temperature turned strontium ferrite into a softer ferrite.     

Research on La–Co-substituted strontium ferrite magnets for high intrinsic coercive force

M-type strontium ferrites with substitution of Sr²⁺ by rare-earth La³⁺, and a little amount of Fe³⁺ by Co²⁺ according to the formula Sr_1−xLa_xFe_12−xCo_xO₁₉, are prepared by the ceramic process. Effects of the substituted amount of La³⁺ and Co²⁺ on structure and magnetic properties of Sr_1−xLa_xFe_12−xCo_xO₁₉ compounds have systematically been investigated by X-ray diffraction (XRD), vibrating sample magnetometer (VSM) and B–H hysteresis curve measurements. In our results, the suitable amount of La³⁺–Co²⁺ substitution may remarkably increase saturation magnetization. Intrinsic coercive force (H_cj) of Sr ferrite magnets is evidently increased without significant decrease in residual flux density (B_r) by La³⁺–Co²⁺ substitution.     

Complex permittivity and complex permeability of Sr ions substituted Ba ferrite at X-band

M-type hexagonal ferrite composition, Ba_(1−x)Sr_xFe₁₂O₁₉ (x=0.0, 0.2, 0.4, 0.6, 0.8 and 1.0), was prepared by a two route ceramic method. Complex permittivity (ε′−jε″) and complex permeability (μ′−jμ″) have been measured using a network analyzer from 8.2 to 12.4 GHz X-ray diffraction confirmed the M-type hexagonal structure and a scanned electron micrograph was used to analyze the grain size distribution of ferrite. Substitution of Sr²⁺ ions causes an increase in porosity that deteriorates the electromagnetic and microstructural properties in the doped samples. Both dielectric constant and dielectric loss are enhanced in comparison to the permeability and magnetic loss over the entire frequency region. This is due to a resistivity variation and the formation of Fe²⁺ ions, which increases the hopping mechanism between Fe²⁺ and Fe³⁺ ions.     

Correlation between site preference and magnetic properties of substituted strontium ferrite thin films

SrFe_12−x(Sn_0.5Zn_0.5)_xO₁₉ thin films with x=0−5 were synthesized by a sol-gel method on thermally oxidized silicon wafer (Si/SiO₂). The site preference and magnetic properties of Zn-Sn substituted strontium ferrite thin films were studied using ⁵⁷Fe Mössbauer spectroscopy and magnetic measurements. Mössbauer spectra displayed that the Zn-Sn ions preferentially occupy the 2b and 4f₂ sites. The preference for these sites is responsible for the anomalous increase in the magnetization at high Zn-Sn substitutions. X-ray diffraction (XRD) patterns and field emission scanning electron microscope (FE-SEM) micrographs demonstrated that single phase c-axis hexagonal ferrite films with rather narrow grain size distribution were obtained. Vibrating sample magnetometer (VSM) was employed to probe magnetic properties of samples. The maximum saturation of magnetization and coercivity at perpendicular direction were 265 emu/g and 6.3 kOe, respectively. It was found that the complex susceptibility has linear variation with static magnetic field.     

Room-temperature ferromagnetism in Zn1−xMnxO

In view of recent controversies on above room-temperature ferromagnetism (RTFM) in transition-metal-doped ZnO, the present paper aims to shed some light on the origin of ferromagnetism by investigating annealing effects on structure and magnetism for polycrystalline Zn_1−xMn_xO powder samples prepared by solid-state reaction method and annealed in air at different temperatures. Magnetic measurements indicate that the samples are ferromagnetic at room temperature (RTFM). Room temperature ferromagnetism has been observed in the sample annealed at a low temperature of 500 °C with a saturated magnetization (M_s) of 0.159 emu/g and a coercive force of 89 Oe. A reduction in RTFM is clearly observed in the sample annealed at 600 °C. Furthermore, the saturation magnetic moment decreases with an increase in grain size, suggesting that ferromagnetism is due to defects and/or oxygen vacancy confined to the surface of the grains. The experimental results indicate that the ferromagnetism observed in Zn_1−xMn_xO samples is intrinsic rather than associated with secondary phases.     

Improving magnetic properties of barium hexaferrites by La or Pr substitution

La or Pr substituted barium hexaferrites, Ba_1−x(La or Pr)_xFe₁₂O₁₉, x=0.00-0.20, were successfully prepared by a citrate combustion process. The sintered bodies were structurally and magnetically studied by powder X-ray diffraction (XRD) and vibrating sample magnetometry (VSM). All XRD patterns show the single phase of the magnetoplumbite barium ferrite without other intermediate phases. Magnetization (M_S) and coercive field (H_C) could be improved by substitutions of La or Pr ions on Ba ion basis sites. The M_S reveal magnetic behavior with respect to La or Pr ions content, showing an increase at first and then a decrease. The H_C increases remarkably with increasing La or Pr ions content.     

Ni–Zn–Sm nanopowder ferrites: Morphological aspects and magnetic properties

Ni–Zn ferrites have been widely used in components for high-frequency range applications due to their high electrical resistivity, mechanical strength and chemical stability. Ni–Zn ferrite nanopowders doped with samarium with a nominal composition of Ni_0.5Zn_0.5Fe_2−xSm_xO₄ (x=0.0, 0.05, and 0.1 mol) were obtained by combustion synthesis using nitrates and urea as fuel. The morphological aspects of Ni–Zn–Sm ferrite nanopowders were investigated by X-ray diffraction, nitrogen adsorption by BET, sedimentation, scanning electron microscopy and magnetic properties. The results indicated that the Ni–Zn–Sm ferrite nanopowders were composed of soft agglomerates of nanoparticles with a high surface area (55.8–64.8 m²/g), smaller particles (18–20 nm) and nanocrystallite size particles. The addition of samarium resulted in a reduction of all the magnetic parameters evaluated, namely saturation magnetization (24–40 emu/g), remanent magnetization (2.2–3.5 emu/g) and coercive force (99.3–83.3 Oe).     

Study on electro-magnetic properties of La substituted Ni–Cu–Zn ferrite synthesized by auto-combustion method

(Ni_0.25Cu_0.20Zn_0.55)La_xFe_2−xO₄ ferrite with x=0.00, 0.025, 0.050 and 0.075 compositions were synthesized through nitrate–citrate auto-combustion method. Crystalline spinel ferrite phase with about 16–19 nm crystallite size was present in the as-burnt ferrite powder. These powders were calcined, compacted and sintered at 950 °C for 4 h. Initial permeability, magnetic loss and AC resistivity of different compositions were measured in the frequency range from 10 Hz to 10 MHz. Saturation magnetization and hysteresis parameters were measured at room temperature with a maximum magnetic field of 10 kOe. Permeability and AC resistivity were found to increase and magnetic loss decreased with La substitution for Fe, up to x=0.025. Saturation magnetization and coercive field also increases up to that limit. The electromagnetic properties were found best in the ferrite composition of x=0.025, which would be better for more miniaturized multi layer chip inductor.     

Preparation and magnetic studies of nickel ferrite nanoparticles substituted by Sn and Cu

The mixed ferrite systems, namely NiFe_2−2xSn_xCu_xO₄ (x=0, 0.1, 0.2, and 0.3) nanoparticles have been studied to understand their structural and magnetic parameters. The NiFe_2−2xSn_xCu_xO₄ nanoparticles were prepared by high energy ball milling (HEBM). The samples were characterized by the X-ray diffraction technique. All samples exhibited spinel structures. The crystalline size and internal strain were evaluated by XRD patterns using Williamson-Hall and Scherrer methods. Magnetic properties of the nanoparticles ferrite were studied by means of alternating gradient force magnetometry (AGFM) and Faraday balance.     

Preparation, and magnetic and electromagnetic properties of La-doped strontium ferrite films

SrLa_xFe_12−xO₁₉ films (x=0-1.0) with large magneto-crystalline anisotropy were synthesized on SiO₂ substrate by sol-gel and self-propagating high-temperature synthesis technique. The films were characterized by various experimental techniques including X-ray diffraction analysis, Field Emission Scanning Electron Microscope, Atomic Force Microscopy, Vibrating Sample Magnetometry and vector network analyzer. The results show that La ions completely enter into strontium ferrite lattice without changing the ferrite appearance; its grain size is approximately 40-80 nm, its length is 100 nm; the magnetoplumbite structure is proved through testing a concertina form of the crystal grain; the maximum coercivity is 5986 Oe at x=0.2; La-doped films possess a wider microwave absorption frequency range with better gross loss angle tangent (tan δ>0.1), from 9 to 10.5 GHz at x=0.2, where the maximum value of tan δ reaches 0.2709. The La-doped films reach smaller nanometer size, better magnetic properties and microwave absorption properties with the doping of lanthanum.     

Magnetic and magnetoelastic properties of Zn-doped cobalt-ferrites—CoFe2−xZnxO4 (x=0, 0.1, 0.2, and 0.3)

Cobalt-ferrite (CoFe₂O₄) based materials are suitable candidates for magnetomechanical sensor applications owing to a strong sensitivity of their magnetostriction to an applied magnetic field. Zn-doped cobalt-ferrites, with nominal compositions CoFe_2−xZn_xO₄ (x=0–0.3), were synthesized by auto-combustion technique using Co- , Fe- , and Zn-nitrate as precursors. X-ray spectra analysis and Transmission electron microscopy studies revealed that the as-prepared powders were comprised of nano-crystalline (∼25–30 nm) cubic-spinel phase with irregularly-shaped grains morphology along with minor impurity phases. Calcination (800 °C for 3 h) of the precursor followed by sintering (1300 °C for 12 h) resulted in a single phase cubic-spinel structure with average grain size ∼2–4 μm, as revealed from scanning electron micrographs. The magnitude of coercive field decreases from ∼540 Oe for x=0 to 105 Oe for x=0.30. Saturation magnetization initially increases and peaks to ∼87 emu/g for x=0.2 and then decreases. The peak value of magnetostriction monotonically decreases with increasing Zn content in the range 0.0–0.3; however the piezomagnetic coefficient (dλ/dH) reaches a maximum value of 105×10⁻⁹ Oe⁻¹ for x=0.1. The observed variation in piezomagnetic coefficient in the Zn substituted cobalt ferrite is related to the reduced anisotropy of the system. The Zn-doped cobalt-ferrite (x=0.1) having high strain derivative could be a potential material for stress sensor application.     

Preparation, characterization and magnetic properties of the doped barium hexaferrites BaFe12−2xCox/2Znx/2SnxO19, x=0.0-2.0

A series of powders of M-typed barium hexaferrites doped with Co, Zn and Sn of general formula BaFe_12-2xCo_x/2Zn_x/2Sn_xO₁₉ (x=0-2.0) were prepared by the co-precipitation/molten salt method. The structures, particle morphology and magnetic properties of the products were characterized by X-ray powder diffraction, vibrating sample magnetometer and ESEM/EDX. The results show that the crystallinity of the samples decreases with increase in the doping amount x. When x is less than 0.6, it is possible to obtain perfectly crystallized hexagonal BaFe_12-2xCo_x/2Zn_x/2Sn_xO₁₉, where the diameters of the particles are around 500 nm. The saturation magnetization of pure barium ferrite BaFe₁₂O₁₉ produced with this method is 71.9 A m² kg⁻¹ at room temperature and the intrinsic coercivity (H_c) is 367.8 kA m⁻¹. The doped barium hexaferrite powder obtained when x is between 0.3 and 0.4 exhibits high saturation magnetization and a temperature dependence of coercivity close to zero.     

Study of magnetic and structural properties of ferrofluids based on cobalt-zinc ferrite nanoparticles

Ferrofluids are colloidal systems composed of a single domain of magnetic nanoparticles with a mean diameter around 30 nm, dispersed in a liquid carrier. Magnetic Co_(1−x)Zn_xFe₂O₄ (x=0.25, 0.50, 0.75) ferrite nanoparticles were prepared via co-precipitation method from aqueous salt solutions in an alkaline medium. The composition and structure of the samples were characterized through Energy Dispersive X-ray Spectroscopy and X-ray diffraction, respectively. Transmission Electron Microscopy (TEM) studies permitted determining nanoparticle size; grain size of nanoparticle conglomerates was established via Atomic Force Microscopy. The magnetic behavior of ferrofluids was characterized by Vibrating Sample Magnetometer (VSM); and finally, a magnetic force microscope was used to visualize the magnetic domains of Co_(1−x)Zn_xFe₂O₄ nanoparticles. X-ray diffraction patterns of Co_(1−x)Zn_xFe₂O₄ show the presence of the most intense peak corresponding to the (311) crystallographic orientation of the spinel phase of CoFe₂O₄. Fourier Transform Infrared Spectroscopy confirmed the presence of the bonds associated to the spinel structures; particularly for ferrites. The mean size of the crystallite of nanoparticles determined from the full-width at half maximum of the strongest reflection of the (311) peak by using the Scherrer approximation diminished from (9.5±0.3) nm to (5.4±0.2) nm when the Zn concentration increases from 0.21 to 0.75. The size of the Co-Zn ferrite nanoparticles obtained by TEM is in good agreement with the crystallite size calculated from X-ray diffraction patterns, using Scherer's formula. The magnetic properties investigated with the aid of a VSM at room temperature presented super-paramagnetic behavior, determined by the shape of the hysteresis loop. In this study, we established that the coercive field of Co_(1−x)Zn_xFe₂O₄ magnetic nanoparticles, the crystal and nanoparticle sizes determined by X-ray Diffraction and TEM, respectively, decrease with the increase of the Zn at%. Finally, our magnetic nanoparticles are not very hard magnetic materials given that the hysteresis loop is small and for this reason Co_(1−x)Zn_xFe₂O₄ nanoparticles are considered as soft magnetic material.