Kinetics of adsorption of oxalic acid on different titanium dioxide samples

FTIR-ATR kinetic studies on the adsorption of oxalic acid on different TiO(2) films were performed. The particulate films were obtained through the evaporation of TiO(2) suspensions. The evolution of the IR bands followed a pseudo-first-order behavior, as previously observed. Systematic studies as a function of the oxalic acid concentration afforded the specific rate constant for adsorption (k(a)) and desorption (k(d)). The influence of physical parameters of the samples, i.e., specific BET area, crystalline domain size, TiO(2) load, film area, and pore size, on the kinetic parameters k(a) and k(d) was analyzed. A mechanism in which the adsorption and desorption processes are controlled by the diffusion through the pores of the films is proposed (intraparticle diffusion). It is concluded that all the samples behave in the same way. Thicker films or those with smaller particle size (higher specific surface area, smaller pores) show the slowest rates of adsorption and desorption. These results are relevant for the design of efficient heterogeneous catalysts and sensors, and for the interpretation of pollutant adsorption.     

Isolation of radioactive strontium from natural samples: A semi-automatic procedure

A procedure for semi-automatic isolation and determination of radioactive strontium from natural samples was developed. The method was tested by the determination of⁹⁰Sr in soil samples and the results obtained were compared to those obtained by the standard procedure. The procedure consists of leaching of strontium (and other cations as well) from soil samples with a water suspension of the cation exchanger Amberlite IR-20, the separation of strontium from other cations, e.g., potassium, calcium, sodium, barium by the anion exchangers Amberlite CG-400 or Dowex Ag 1×8 with 0.25M HNO₃ in ethanol-methanol mixture as eluent in the apparatus specially constructed for this purpose. Determination of⁹⁰Sr was done on the low-level gas-flow β-counter and by Cherenkow counting on the liquid-scintillation counter few hours after the separation. It was shown that this procedure might be successfully applied for rapid determination of⁹⁰Sr in soil samples and other natural samples in a timesaving manner.     

Kinetic and isothermal studies of lead ion adsorption onto palygorskite clay

The use of a natural palygorskite clay for the removal of Pb(II) from aqueous solutions for different contact times, pHs of suspension, and amounts and particle sizes of palygorskite clay were investigated. The variations of the pH value of Pb(II) solutions on natural palygorskite in the adsorption process were determined. Batch adsorption kinetic experiments revealed that the adsorption of Pb(II) onto palygorskite clay involved fast and slow processes. It was found that the adsorption mechanisms in the lead/palygorskite system follow pseudo-second-order kinetics with a significant contribution from film diffusion. SEM observations demonstrated that an important interaction at the lead-granule interface occurred during the adsorption process. The adsorption isotherms were described by means of the Langmuir and Freundlich isotherms and the Langmuir model represents the adsorption process better than the Freundlich model. The maximum adsorption capacity of Pb(II) onto natural palygorskite was 104.28 mg g(-1).     

Kinetics of water vapor adsorption by ion exchange polyacrylonitrile fibres

Kinetics of water vapor adsorption by ion exchange PAN fibres has been studied. Adsorption can be described by an exponential kinetic equation. Experimental results permit the assumption that the surface of the materials studied behaves as uniformly nonhomogeneous with more strongly expressed entropy nonhomogeneity, connected with cross-linking of the modified fibres. The dependence between the kinetic characteristics and the solubility of the materials in DMF shows that the main factor affecting unfavorably the adsorption kinetics is cross-linking. Increase of N-containing anion exchange groups reduces the effect of adsorption delay due to cross-linking.

---

. , . , , , . , , - , . N- -- .

     

Kinetics of Pu(IV) sorption by smectite-rich natural clay

Kinetics of sorption of Pu(IV) by smectite-rich clay has been studied at varying metal ion concentrations. Different concentrations were achieved using different isotopes of Pu, namely, ²³⁹Pu, ²³⁸Pu and ²³⁷Pu. ²³⁷Pu was produced by alpha induced reaction on ²³⁵U, followed by radiochemical separation of Pu from irradiated U₃O₈ target. The concentrations used are above and below the solubility of Pu(IV) under neutral pH conditions, thereby, indicating the mechanism of sorption reactions of Pu(IV) in typical laboratory experiments and field level observations. Kinetics of Pu(IV) at 10^?13 M concentration was found to be fast whereas at higher metal concentration the rate is governed by a slow step, indicating the role of formation of Pu(IV) polymeric species at the sorbent surface.     

Separation of radioactive strontium from natural samples by means of mixed-solvent anion exchange

A new procedure for isolation and determination of⁹⁰Sr in real natural samples is presented. It consists of bringing natural samples in a soluble form suitable for separation on an ion-exchange column, separation of calcium from strontium by means of the anion exchanger Amberlite CG-400 and 0.25M HNO₃ in methanol as eluent for calcium, and the determination of⁹⁰Sr using a low level -counter after elution with H₂O, scavenging steps and SrCO₃ precipitation. The method was tested with IAEA standards of natural samples with known contents of⁹⁰Sr, and water samples, where the concentration of⁹⁰Sr was previously determined by the standard IAEA procedure. The results obtained show that it is possible to isolate and determine low levels of⁹⁰Sr in natural samples. The procedure is favorable because of the simple separation of radioaactive strontium without using fuming nitric acid.     

Rydberg states of the strontium ion

We report on the spectroscopy of highly excited strontium ions after resonant multistep laser excitation. The states observed belonged to then s (26≦n≦79),n d (25≦n≦83),n f (28≦n≦86) andn g (30≦n≦81) series of Sr⁺. A least squares fit has been applied to determine the quantum defects and their linear energy dependence in each series, together with the ionisation limit of Sr⁺. The analysis of our data lead to a revised value for this ionisation limit of 88 965.18±0.02 cm^?1, with respect to the ground state of the Sr⁺ ion. Analysis of the non core-penetratingn g states yielded experimental values for the dipole and quadrupole polarizability of Sr⁺⁺, which are in satisfactory agreement with previous calculations.     

Comparative study of strontium adsorption on dioctahedral and trioctahedral smectites

Slovak bentonites characterized by good rheological, mineralogical and chemical stability are considered as suitable sealing barriers for construction of Slovak deep geological repository for high-level radioactive waste and spent nuclear fuel. There is several Slovak bentonite deposits, bentonites of which have appropriate adsorption properties meeting the geotechnical requirements for this type of barriers. Study of adsorption properties of bentonites (mainly smectites) is an essential step for developing the migration model long-lived corrosion and activation products, and fission products of uranium. Nuclear wastes contain the most important nuclear fission products, β-emitter ⁹⁰Sr with long half-life, biological half-life and high mobility. The present paper investigates and compares the strontium adsorption properties of bentonites of different mineral composition consisted mainly of dioctahedral and trioctahedral smectites.     

Kinetics of oxygen adsorption on silver films

Kinetics of oxygen adsorption on silver films prepared by metal vacuum evaporation and condensation technique has been studied. The adsorption proceeds in accordance with the kinetic law of Zeldovich-Roginskii. Oxygen dissolution in the silver subsurface layers result in a decrease of the initial adsorption rate and an enhanced exponential decrease of the adsorption rate as a function of surface coverage.     

Hydroxide ion adsorption on self-assembled monolayers

It is argued, on the basis of density functional calculations, that a self-assembled monolayer of oligo(ethylene glycol) or n-alkanes in contact with water will preferentially adsorb hydroxyl ions (either from autoionization of water or added to the solution) on both methoxy- and hydroxide-terminated endgroups, thus charging the surface region of the SAM negatively with an estimated charge density of about 1 microC/cm(2) in agreement with recent experiments. The negative charging can explain long-ranged forces between opposing SAM surfaces. On dense SAMs, hydroxyl ions are highly mobile. Hydronium ions can absorb by penetration into the SAM provided there is enough lateral space for their encapsulation. The important role of hydration is demonstrated by calculating the excess binding energy of adsorption using a Born-Haber cycle.     

Influences of salt concentration,loading and pH on strontium adsorption

The adsorption of Sr on clay which contains zeolites and montmorillonite mixtures was investigated in solutions of NaCl by means of a batch technique. Sr retention was reduced with increasing NaCl concentration from 5·10^–4 to 5·10^–1M. Distribution coefficients (K _d ) linearly increased with pH in the acidic region but they were almost independent of pH in neutral and alkaline solutions. By fitting the data of the Dubinin-Radushkevich (D-R) isotherm, the mean energies of adsorption and adsorption capacities of Sr at different pH values were calculated. The results showed that the mode of adsorption below pH 4.5 is ion exchange, while above that value a multilayer adsorption occurs. Adsorption data were fitted to the Freundlich isotherm and from empirical Freundlich parameters a site distribution function was calculated.     

Effect of Cs(I) and Cr(III) on the adsorption of strontium ion by living irradiated Saccharomyces cerevisiae

Journal of Radioanalytical and Nuclear Chemistry - In this paper, the effects of three coexisting ion systems (Cs, Sr), (Cr, Sr) and (Cs, Cr, Sr) on the adsorption of Sr(II) by irradiated...     

A characterization study of some aspects of the adsorption of aqueous Co2+ ions on a natural bentonite clay

The natural bentonite used in this study contained montmorillonite in addition to low cristobalite. The uptake of aqueous Co(2+) ions was investigated as a function of time, concentration, and temperature. In addition, the change in the interlayer space of montmorillonite was analyzed using XRPD, and the distribution of fixed Co(2+) ions on the heterogeneous clay surface was recorded using EDS mapping. The sorbed amount of Co(2+) appeared to closely follow Freundlich isotherm, with the sorption process showing apparent endothermic behavior. The relevance of the apparent DeltaH(o) values is briefly discussed. Analysis of the Co-sorbed bentonite samples using SEM/EDS showed that the montmorillonite fraction in the mineral was more effective in Co(2+) fixation than the cristobalite fraction. XRPD analysis demonstrated that the interlayer space of montmorillonite was slightly modified at the end of sorption.     

Control of photochemistry of stilbazolium ion by adsorption to poly(potassium vinylsulfate) and to hectorite clay

Adsorption or intercalation of trans-1-methyl-4-(2-phenylvinyl)pyridinium ion (stilbazolium ion, SB ( 1 )) to a polyelectrolyte, i. e., poly(potassium vinylsulfate) (PVSK), and to a hectorite clay is studied and its effect on the photochemistry of SB examined. trans-cis Photoisomerization of SB molecularly adsorbed to PVSK proceeds efficiently as with free SB in water, while that of SB molecularly intercalated in the clay is markedly suppressed. Photodimerization proceeds efficiently with SB intercalated in the clay in the aggregated form. Overall photodecoloration, however, proceeds more efficiently with SB adsorbed to PVSK under multiple adsorption conditions apparently due to the higher mobility of PVSK-adsorbed SB compared to that of clay-intercalated SB.     

Kinetics of metal ion sorption on clinoptilolite

From an investigation into the sorption kinetics of Na⁺, K⁺, and Sr²⁺ ions from standard solutions on finely dispersed clinoptilolite incorporated in a highly permeable inert polyacrylamide gel we have determined the characteristic kinetic size of clinoptilolite and the diffusion coefficients for Na⁺, K⁺, and Sr²⁺ in the clinoptilolite microcrystallites and transport pores. Diagrams have been constructed to enable a valid selection of kinetic models for sorption of the ions from any solutions on clinoptilolite.Institute of Chemistry, Far Eastern Branch of the Russian Academy of Sciences, 690022 Vladivostok. V. I. Vernadskii Institute of Geochemistry and Analytical Chemistry, Russian Academy of Sciences, 117975 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 2, pp. 273–277, February, 1992.     

Kinetics of salicylic acid adsorption on activated carbon

The adsorption and desorption of salicylic acid from water solutions was investigated in HPLC microcolumns packed with activated carbon. The adsorption isotherm was obtained by the step-up frontal analysis method in a concentration range of 0-400 mg/L and was well fitted with the Langmuir equation. The investigation of rate aspects of salicylic acid adsorption was based on adsorption/desorption column experiments where different inlet concentrations of salicylic acid were applied in the adsorption phase and desorption was conducted with pure water. The concentration profiles of individual adsorption/desorption cycles data were fitted using several single-parameter models of the fixed-bed adsorption to assess the influence of different phenomena on the column behavior. It was found that the effects of axial dispersion and extraparticle mass transfer were negligible. A rate-determining factor of fixed-bed column dynamics was the kinetics of pore surface adsorption. A bimodal kinetic model reflecting the heterogeneous character of adsorbent pores was verified by a simultaneous fit of the column outlet concentration in four adsorption/desorption cycles. The fitted parameters were the fraction of mesopores and the adsorption rate constants in micropores and mesopores, respectively. It was shown that the former rate constant was an intrinsic one whereas the latter one was an apparent value due to the effects of pore blocking and diffusional hindrances in the micropores.     

A comparative study of the adsorption of uranium on commercial and natural (Cypriot) sea sand samples

The adsorption of hexavalent uranium on two different types of sea sand [e.g. a local, Cypriot (N_SS) and a commercially available marine sediment (C_SS)] has been investigated as a function of pH, initial metal concentration, ionic strength and contact time under normal atmospheric conditions. Before carrying out the adsorption experiments, the sea sand samples have been characterized by XRD, XRF, N₂-adsorption, acid/base titrations and FTIR spectroscopy. Sample characterization showed clearly that the two sea sand types differ significantly in their composition, particularly in their calcite and FeOOH content. According to experimental data obtained from acid/base titrations and adsorption batch experiments sea sand composition affects the acid/base and the adsorption properties of the adsorbents. The extraordinary high affinity of N_SS for hexavalent uranium in the alkaline pH region can be attributed to the formation of mixed U(VI)–carbonato surface species on the FeOOH crystall phases present in N_SS, which effectively compete the formation of U(VI)–carbonato complexes in solution. On the other hand, data obtained by adsorption experiments carried out in solution of different ionic strengths don’t differ significantly from one another indicating the formation of inner-sphere complexes. Finally, the adsorption on sea sands is a relatively fast two-step process.     

On the adsorption mechanism of copper ions on bentonite clay

Russian Chemical Bulletin - The adsorption of copper ions on bentonite clay was studied as a function of the pH of the medium, contact time, and temperature. A comparative study of the...