MCM-41-HY复合分子筛的合成及其在深度加氢脱硫中的应用

在水热条件下合成了包覆型MCM-41-HY复合分子筛.采用XRD、N2气吸附和SEM等方法对其进行了表征.结果表明,MCM-41-HY复合分子筛和MCM-41与H型Y沸石(HY)的机械混合物明显不同,在复合分子筛MCM-41-HY中,中孔相MCM-41附晶生长在HY沸石上,将HY包覆起来.以二苯并噻吩为模型化合物,考察了该材料担载NiMo催化剂的加氢脱硫活性.结果表明,MCM-41-HY复合分子筛与MCM-41和HY的机械混合物担载NiMo催化剂的加氢脱硫(HDS)活性相当,但MCM-41-HY复合分子筛担载NiMo催化剂的裂化活性较低.其裂化活性不同的原因在于其载体孔道结构和酸性位的分布不同.     

HY／MCM-41／γ-A12O3负载的硫化态Ni-Mo-P催化剂上萘的加氢

采用水热法合成了不同SiO2／Al2O3比的MCM-41介孔分子筛．并分别以HY／MCM-41／γ-A1203，HY／γ-A12O3和γ-Al2O3为载体，用浸渍法制备了Mo-Ni-P催化剂．以萘为模型化合物，考察了硫化态Mo-Ni-P催化剂的加氢活性．结果表明，不同载体负载的催化剂催化活性均随着活性组分负载量的增大而提高，其中掺杂大比表面MCM-41的HY／MCM-41/γ-Al2O3所负载的催化剂催化活性提高幅度最大．由于MCM-41与HY分子筛在酸性和孔结构上存在互补性，因而催化剂对萘加氢存在协同作用．提出了萘加氢的反应机理，认为反应网络包括两个平行路径：-是萘加氢生成四氢萘后发生异构化或开环反应；二是萘加氢生成四氢萘后进-步加氢生成十氢萘，继而发生异构化或开环反应．     

双组元Y／MCM-41中微孔复合分子筛的合成和表征

通过原位处理分步晶化、水热合成的方法，首次从NaY凝胶出发制备了含有Y和 MCM-41两种分子筛成分的Y/MCM-41中微孔复合分子筛新材料，考察了合成条件对复 合分子筛晶化的影响。利用层厚法和相对结晶度工作曲线法确定了复合材料中两种 分子筛的相对含量。通过XRD，MAS NMR，SEM，XPS，IR，N_2吸附脱附、热处理等 手段对复合材料进行了表征，并与MCM-41和Y型分子筛的有关性能进行了对比研究 。结果表明，复合分子筛材料的热和水热稳定性高于相同分子筛比例的机械混合样 品。与机械混合物样品相比，其中孔表现出孔径缩小、也道规整性变差、孔壁增厚 和部发结晶化的特点，复合材料中两种分子筛之间存在界面效应，推测Y/MCM-41复 合分子筛材具有“包覆式”结构特征。以模型化合物理学，3，5-三异丙基为进料 考察了其催化裂化活性，中微孔复合分子筛的催化裂化活性优于机械混合样品。     

一种合成高水热稳定性微孔-介孔复合分子筛β沸石/MCM-41的新方法

首次以β沸石作为硅铝源制备了β沸石/MCM-41微孔-介孔复合分子筛材料，通过XRD、IR、N₂吸附脱附、SEM和水热处理等手段对复合材料进行了表征，并与MCM-41和β沸石及二者的机械混合物的有关性能进行了对比研究。结果表明，复合分子筛明显不同于机械混合物，其水热稳定性远远高于普通方法合成的介孔分子筛，而且发现通过改变体系的n_Na/n_Si比，可以调变复合样品中的微孔、介孔相的相对含量。     

负载型铜系分子筛催化剂在苯酚羟基化反应中的应用

以介孔分子筛MCM-41、MCM-48和AIMCM-41以及微孔分子筛Naβ和MOR为载体,分别采用有机官能团化法和分步水热合成法制备了系列负载型催化剂,考察了其在苯酚羟基化反应中的活性;得到了不同载体类型、不同负载方法及不同助剂与反应活性的对应关系．结果表明：以微孔分子筛为载体的催化剂对副产物有明显的抑制作用．介孔分子筛AIMCM-41,MCM-41,MCM--48为载体时,催化剂在苯酚羟基化反应中的活性顺序为AIMCM-41〉MCM-48〉MCM-41,助剂镧和钴的引入可以有效抑制副产物的产生．     

载体性质对Pd催化剂加氢脱硫性能的影响

以Si O2、全硅MCM-41(Si-MCM-41)、通过机械混合Si-MCM-41与ZSM-5得到的Z-MCM-41-M以及通过在ZSM-5外部包覆MCM-41制备得到的Z-MCM-41四种材料为载体,制备了四种负载型Pd催化剂。采用XRD、HRTEM、N2吸附-脱附、NH3-TPD手段对Pd催化剂进行了表征;以二苯并噻吩(DBT)为模型化合物,在固定床反应器上对四种催化剂的加氢脱硫(HDS)活性、加氢路径选择性和加氢裂化活性进行了考察,研究了不同类型载体对Pd催化剂加氢脱硫性能的影响。结果表明,载体的性质会显著影响负载型Pd催化剂的加氢脱硫性能。载体的比表面积对负载型Pd催化剂加氢脱硫活性影响不大,但是HYD路径的选择性与载体的孔道结构有关;具有介孔孔道结构有利于加氢路径选择性的提高。酸性载体负载的Pd催化剂表现出较好加氢脱硫活性和加氢选择性,这与氢溢流有关。介孔材料的孔道结构与微孔沸石的酸性有机结合,所得到的Z-M CM-41复合材料是是潜在的贵金属Pd加氢脱硫催化剂优良载体,可有效提升其加氢脱硫活性。     

HY/MCM-41/γ-Al2O3负载的硫化态Ni-Mo-P催化剂上萘的加氢

 采用水热法合成了不同SiO2/Al2O3比的MCM-41介孔分子筛. 并分别以HY/MCM-41/γ-Al2O3, HY/γ-Al2O3和γ-Al2O3为载体,用浸渍法制备了Mo-Ni-P催化剂. 以萘为模型化合物,考察了硫化态Mo-Ni-P催化剂的加氢活性. 结果表明,不同载体负载的催化剂催化活性均随着活性组分负载量的增大而提高,其中掺杂大比表面MCM-41的HY/MCM-41/γ-Al2O3所负载的催化剂催化活性提高幅度最大. 由于MCM-41与HY分子筛在酸性和孔结构上存在互补性,因而催化剂对萘加氢存在协同作用. 提出了萘加氢的反应机理,认为反应网络包括两个平行路径: 一是萘加氢生成四氢萘后发生异构化或开环反应; 二是萘加氢生成四氢萘后进一步加氢生成十氢萘,继而发生异构化或开环反应.     

含NiY分子筛的加氢裂化催化剂载体研究

采用水热晶化法,合成出了含骨架杂原子Ni的NiY分子筛。分别以Y分子筛和NiY分子筛作为载体,通过等体积浸渍法担载金属活性组分Ni、Mo,制备加氢裂化催化剂。通过NH₃-TPD表征催化剂的表面酸性、固定床反应器评价催化剂的加氢裂化性能。结果表明,将Ni引入分子筛骨架中,可以调变催化剂的表面酸性,提高其裂化和脱硫活性,并减少催化剂上的积炭。     

全硅MCM-41担载的加氢脱硫催化剂的TPR研究

用TRP技术研究了以全硅MCM-41(Si-MCM-41)和HNO3交换的全硅MCM-41(H-MCM-41)为载体制备的Ni-Mo、Co-Mo和Ni-W加氢脱硫(HDS)催化剂的还原性能，并以0．8(wt)％二苯并噻吩(DBT)的十氢萘溶液为模型化合物，在高压固定床反应器上考察了上述催化剂的加氢脱硫(HDS)反应性能。结果表明，Si-MCM-41经稀HNO3交换后，所担载的Ni-Mo和Ni-W催化剂还原性能、HDS活性和加氢活性有显著变化，但对Co-Mo催化剂影响不大。这说明在Ni-Mo／H-MCM-41和Ni-W／H-MCM-41中可能存在氢溢流现象，DBT的HDS活性与载体表面酸性和氢溢流有关。     

NiMo催化剂载体中纳米HY分子筛和氧化铝混合方式对柴油加氢脱硫性能的影响

以纳米HY分子筛-氧化铝混合物为载体,根据两者混合方式的不同（溶胶凝胶法和机械混合法）制备了两种NiMo加氢脱硫催化剂,并对其进行了XRD、BET、TPD、H₂-TPR、HRTEM和FT-IR等表征。与溶胶凝胶法催化剂相比,机械混合法催化剂表现出了较好的纹理结构和更高酸量,其金属相更易还原,边角位Mo原子的分散度更高,表现出了更高的加氢脱硫性能。但溶胶凝胶法催化剂的type-Ⅱ Ni-Mo-S活性相前驱物比例更高,MoS₂晶片长度更大,堆垛程度更高,活性组分分散度较差。虽然溶胶凝胶法有利于提高type-Ⅱ Ni-Mo-S活性相前驱物比例,但是该方法导致的较差孔结构抑制了这种优势,并且降低了活性组分分散度,减弱了催化活性。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.