Ion–polymer and ion–ion interaction in PEO‐based polymer electrolytes having complexing salt LiClO4 and/or ionic liquid, [BMIM][PF6]

Ion–polymer and ion–ion association in polymer electrolyte films of PEO complexed with salt LiClO₄, ionic liquid (1‐butyl‐3‐methylimidazolium hexafluorophosphate, BMIMPF₆) and (LiClO₄ + BMIMPF₆) have been studied by laser Raman spectroscopy. The cations (Li⁺ and/or BMIM⁺) of the dopant salt/IL are shown to complex with the ether oxygen of the polymer backbone (i.e. C O C bond of PEO). The polymer–cation complexation results in the appearance of an additional peak at ∼1131 cm⁻¹ apart from the C O C stretching vibrations of PEO at ∼1062 and 1141 cm⁻¹. This peak due to polymer–cation complexation is relatively strong for LiClO₄ than BMIMPF₆, indicating stronger interaction for the former. In the PEO:LiClO₄ and PEO:BMIMPF₆ spectra, Raman peaks at 937 and 747 cm⁻¹, respectively related to Li⁺· ClO and BMIM⁺· PF ‘contact ion pairs’, have also been observed as a result of ion–ion association. In the polymer electrolyte PEO:LiClO₄ + BMIMPF₆ which contained two different anions, viz. ClO and PF, an interesting observation of the formation of ‘cross contact ion pairs’ viz. Li⁺· PF and BMIM⁺· ClO is also reported. Copyright © 2011 John Wiley & Sons, Ltd.     

Role of salt concentration on conductivity optimization and structural phase separation in a solid polymer electrolyte based on PMMA-LiClO4

Although a large number of ionic conductors based on poly(methyl-methacrylate) (PMMA) are reported in literature, an optimization of salt concentration with respect to conductivity and stability properties remains by and large neglected. We report, perhaps for the first time, such an optimization of salt (LiClO₄) concentration on structural, morphological, electrical, and ion–polymer interaction in PMMA-based solid polymer films. The active coordination site for the cation (Li⁺), out of the two possible electron donating functional groups (i.e. C=Ö and Ö–CH₃) in PMMA, has been ascertained on the basis of evidences recorded in Fourier transform infrared spectrum. The results suggested C=Ö as the only possible site in PMMA matrix for coordination with Li⁺ cation. The X-ray diffraction results have clearly indicated an optimum limit of salt dissolution in PMMA matrix corresponding to O/Li = 4 (i.e., ~21wt.%) above which “phase-separation” occurs distinctly. The effect of salt concentration on amorphous → crystalline phase changes in PMMA and its correlation to morphology have been clearly observed in terms of their impact on electrical properties. An optimum electrical conductivity of ~7.2 × 10^?5S cm^?1 has been recorded at 100°C (~PMMA glass transition). The temperature dependence of conductivity follows typical Vogel–Tamman–Fulcher behavior.     

Improved Ionic Conductivity of NBR/Epoxy Resin/LiClO4 Composites by Adding Ionic Liquid

Solid polymer electrolyte with high ionic conductivity was prepared by adding an ionic liquid, 1-butyl-3-methylimidazolium trifluoromethanesulfonate (BMIMOTF) to the nitrile butadiene rubber/epoxy resin/LiClO₄ (NBR-EP-Li) system. The addition of BMIMOTF into NBR-EP-Li composites, with the LiClO₄/BMIMOTF mole ratio of 1/0.54, improved the conductivity by 6–17 times depending on the amount of LiClO₄. Infrared difference spectroscopy and nuclear magnetic resonance spectroscopy analysis confirmed the interaction between LiClO₄ and BMIMOTF, which caused a decreasing interaction between ClO₄ ^? and Li⁺. X-ray diffraction and field emission scanning electron microscopy analysis indicated BMIMOTF improved the dissolution of LiClO₄ and contributed to the increase of conductivity by an increase of free Li⁺.     

A novel PEO-based blends solid polymer electrolytes doping liquid crystalline ionomers

A novel PEO-based blends solid polymer electrolytes doping liquid crystalline ionomers (LCI), PEO/PMMA/LiClO₄/LCI, and PEO/LiClO₄/LCI were prepared by solution casting technology. Scanning electron microscope (SEM) and energy-dispersive spectroscopy (EDS) analysis proved that LCI uniformly dispersed into the solid electrolytes and restrained phase separation of PEO and PMMA. Differential scanning calorimetry (DSC) results showed that LCI decreases the crystallinity of blends solid polymer electrolytes. Thermogravimetric analysis (TGA) proved LCI not only improved thermal stability of PEO/PMMA/LiClO₄ blends but also prevent PEO/PMMA from phase separation. Infrared spectra results illustrated that there exists interaction among Li⁺ and O, and LCI that promotes the synergistic effects between PEO and PMMA. The EIS result revealed that the conductivity of the electrolytes increases with LiClO₄ concentration in PEO/PMMA blends, but it increases at first and reaches maximum value of 2.53?×?10^?4 S/cm at 1.0 % of LCI. The addition of 1.0 % LCI increases the conductivity of the electrolytes due to that LCl promoting compatibility and interaction of PEO and PMMA. Under the combined action of rigidity induced crystal unit, soft segment and the terminal ionic groups in LCI, PEO/PMMA interfacial interaction are improved, the reduction of crystallinity degree of PEO leads Li⁺ migration more freely.     

A comparative study of coordination between host polymers and Li ions in UV-cured gel polymer electrolytes

Crosslinked gel polymer electrolytes are prepared via free radical photo-polymerization of 1,6-hexanediol diacrylate (HDDA) or tri(ethylene glycol) diacrylate (TEGDA) with 1 M LiClO₄ dissolved in a solvent mixture of ethylene carbonate (EC) and propylene carbonate (PC). TEGDA-based gel polymer electrolytes containing a polar moiety of ethylene oxide exhibit relatively high ionic conductivities over a temperature range from − 15 to 65 °C in comparison to those based on HDDA. The coordination structure between polar moieties of a polymer backbone and Li⁺ ions is examined using a Fourier transform infrared (FT-IR) spectroscopy. The results of FT-IR analyses manifest that the CO and COC groups of TEGDA-based polymer matrix form the complex with Li⁺ ions.     

High ionic conductive behavior of cyanoethylated polyvinylalcohol- and polyacrylonitrile-based electrolytes

New type polymer electrolyte films based on poly(acrylonitrile), (PAN), and cyanoethylated poly(vinyl alcohol), (CN-PVA), were prepared and their conducting behaviors were investigated. CN-PVA was prepared from poly(vinyl alcohol), (PVA) and acrylonitrile in the presence of sodium hydroxide and quaternary ammonium halide as a phase transfer catalyst. Free standing PAN- and CN-PVA-based electrolyte films were prepared by casting the propylene carbonate (PC) solution containing PAN, CN-PVA and LiClO₄ and removing some amount of PC. Ionic conductivity of the electrolyte film, (PAN)10(CN-PVA) 10(LiClO₄)8(PC)4 composite film was 14.6 mS cm^− 1 at 30 °C and 22.4 mS cm^− 1 at 60 °C. FTIR results for the electrolyte films suggest that the nitrile groups in the CN-PVA matrix mainly interact with the lithium ions in the films and enhance dissolution of the lithium salt in the electrolyte films.     

Characterization of thin film lithium electrode materials

Thin rf-sputtered films of Li₄Fe_0.5±xTi_4.5±yO_11.75±z, Li₄Co_0.5±xTi_4.5±yO_11.5±z, Li₄Ti_5±xO_12±y, LiCo_1±xO_2±y and C were investigated by X-ray diffraction, thickness and weight determination, ICP/AAS, EDX and coulometric titration experiments employing the following liquid electrolytes (PC:EC:DMC=1:1:3, 1 M LiPF₆), (PC:DEC=1:4, 1 M LiPF₆), (EC:DMC=1:1, 1 M LiPF₆), (PC:DME=1:1, 1 M LiClO₄) and (γ-buthyrolactone, 1M LiClO₄). For comparison, cold isostatically pressed monolithic pellets of Li₄Fe_0.5Ti_4.5O_11.75, Li₄Co_0.5Ti_4.5O_11.5 and Li₄Ti₅O₁₂ were examined. The slope of the coulometric titration curves depends strongly on the employed liquid electrolyte. In the case of thin films, the stoichiometric width of the liquid electrolyte salt may have an additional impact on the results.     

Lithium garnet oxide dispersed polymer composite membrane for rechargeable lithium batteries

Free-standing composite polymer membranes comprising of high molecular weight poly (ethylene oxide) (PEO) complexed with lithium perchlorate (LiClO₄) and Li₆La₂BaTa₂O₁₂ (LLBTO) garnet oxide as filler were developed via standard solution-casting method. The as-synthesized composite membranes were investigated through powder x-ray diffraction (PXRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and impedance spectroscopy techniques for their phase, thermal, morphological, and electrical properties, respectively. The lithium ion conductivity of polymer composite membranes consisting of PEO₈/LiClO₄ with various weight percents (5, 10, 15, 20, 25, and 30) of LLBTO were evaluated. We demonstrated a significant enhancement in Li⁺ conductivity with the addition of LLBTO to the polymer-lithium salt complex. Among the investigated membranes, the composite containing 20 LLBTO wt% garnet oxide exhibits maximized room temperature (30 °C) Li⁺ conductivity of 2.03 × 10^?4 S cm^?1 and electrochemical stability greater than 4.5 V.     

Study on the effect of PEG in ionic transport for CMC-NH<Subscript>4</Subscript>Br-based solid polymer electrolyte

The present study investigates the ion transport properties and structural analysis of plasticized solid polymer electrolytes (SPEs) based on carboxymethyl cellulose (CMC)-NH₄Br-PEG. The SPE system was successfully prepared via solution casting and has been characterized by using electrical impedance spectroscopy (EIS), Fourier transform infrared (FTIR) spectroscopy, and x-ray diffraction (XRD) technique. The highest conductivity of the SPE system at ambient temperature (303 K) was found to be 1.12?×?10^?4 S/cm for un-plasticized sample and 2.48?×?10^?3 S cm^?1 when the sample is plasticized with 8 wt% PEG. Based on FTIR analysis, it shows that interaction had occurred at O–H, C=O, and C–O moiety from CMC when PEG content was added. The ionic conductivity tabulation of SPE system was found to be influenced by transport properties and amorphous characteristics as revealed by IR deconvolution method and XRD analysis.     

Solid polymer electrolytes in a poly(butadiene-acrylonitrile)–LiBr system

Poly(nitriles) are among the polymer matrices providing high salt solubility and, in some cases, superionic lithium conductivity at ambient temperatures observed in highly concentrated solvent-free polymer electrolytes. However, the properties of these electrolytes in which ionic aggregation prevails remain difficult to reproduce and predict, as current theories do not adequately model their attributes. The development of new concepts for ion transport in highly concentrated solid polymer electrolytes (SPEs) requires a better understanding of the fundamentals of structure formation in a polymer–salt system over a wide concentration range including salt precipitation. In an attempt to approach this goal, a series of fundamental studies was carried out on the systems based on a rubbery random copolymer of butadiene and acrylonitrile (abbreviated as PBAN). In the present work, LiBr with monatomic halide anion was used as a lithium salt. The effect of LiBr concentration (0.05 to 3.35 mol kg^?1) on phase composition, ion–molecular interactions, glass transition temperature, and ionic conductivity was studied by optical microscopy, FTIR, X-ray diffraction, DSC, and impedance measurements. The results were compared with those of PBAN–LiClO₄ and PBAN–LiAsF₆ studied previously. Low salt solubility and separation of a metastable cubic CsCl-type polymorph of LiBr were established. The highest conductivity of ～10^?4 S cm^?1 at >50 °C was observed for heterogeneous samples comprising this phase. While the conductivity of PBAN–LiBr was lower than that of PBAN–LiClO₄ and PBAN–LiAsF₆, this study provides a new insight into the nature of polymer electrolyte systems.     

Experimental investigations on plasticized PMMA/PVA polymer blend electrolytes

Blend based polymer electrolytes composed of poly (methyl methacrylate) (PMMA), poly(vinylalcohol) (PVA) and LiClO₄ are prepared using solvent casting technique. The polymer films are characterized by XRD and FTIR studies to determine the molecular environment for the conducting ions. These polymer films have been investigated in terms of ionic conductivity using the results of impedance studies. The influence of the blend composition on the electrochemical behaviour is also discussed. The highest room temperature conductivity obtained for the film consisting of PMMA, PVA, LiClO₄ and DMP is 0.06×10⁻³ S/cm at 303 K. The PMMA-PVA blend based polymer electrolytes look very desirable and promising for lithium battery applications.     

Electrical and structural studies of a LiBOB-based gel polymer electrolyte

A series of gel polymer electrolytes (GPEs) containing lithium bis(oxalato)borate (LiBOB), propylene carbonate (PC), and ethylene carbonate (EC) have been investigated. Poly(ethylene oxide) (PEO) was used as the polymer. First, a series of liquid electrolytes was prepared by varying the Li:O ratio and obtained the best composition giving the highest conductivity of 7.1?×?10^?3 S cm^?1 at room temperature. Then, the PEO-based GPEs were prepared by adding different amounts of LiBOB and PEO into a mixture of equal weights of EC and PC (40 % of each from the total weight). The gel electrolyte comprises of 12.5 % of LiBOB, 7.5 % of PEO, 40 % of EC, and 40 % of PC gave the highest ionic conductivity of 5.8?×?10^?3 S cm^?1 at room temperature. From the DC polarization measurements, ionic nature of the gel electrolyte was confirmed. Fourier transform infrared (FTIR) spectra of electrolytes showed the Li⁺ ion coordination with EC and PC molecules. These interactions were exhibited in the peaks corresponding to ring breathing of EC at 893 cm^?1 and ring bending of EC and symmetric ring deformation of PC at 712 and 716 cm^?1 respectively. The presence of free Li⁺ ions and ion aggregates is evident in the peaks due to the symmetric stretching of O–B–O at 985 cm^?1.     

Properties of a gel polymer electrolyte based on lithium salt with poly(vinyl butyral)

Poly(vinyl butyral) (PVB) is of particular interest because of its low cost, extremely wide temperature work range (? 20 to 120 °C), and efficient chemical stability. In this study, a gel polymer electrolyte (GPE) containing Li⁺ ions was fabricated by using dimethylacetylamine (DMA), lithium perchlorate (LiClO₄), and PVB. The experimental results indicated that a highly transparent GPE with a high ionic conductivity (σ) could be obtained by mixing glue (DMA with a PVB content of 10 wt%) with a LiClO₄ content of 6 wt%. It was found that the ionic conductivity (σ) of the GPE depended on the LiClO₄ content, and the GPE with a LiClO₄ content of 6 wt% exhibited a maximum σ of 7.73 mS cm^?1, a viscosity coefficient of 3360 mPa s, and a transmittance greater than 89% (visible region) at room temperature. Furthermore, PVB improved the electrolyte solution leakage, and the LiClO₄ was used as an ion supply source for the high σ of the GPE.     

Enhanced electrical properties of polyethylene oxide (PEO) + polyvinylpyrrolidone (PVP):Li<Superscript>+</Superscript> blended polymer electrolyte films with addition of Ag nanofiller

Polymer blended films of polyethylene oxide (PEO)?+?polyvinyl pyrrolidone (PVP):lithium perchlorate (LiClO₄) embedded with silver (Ag) nanofiller in different concentrations have been synthesized by a solution casting method. The semi-crystalline nature of these polymer films has been confirmed from their X-ray diffraction (XRD) profiles. Fourier transform infrared spectroscopy (FTIR) and Raman analysis confirmed the complex formation of the polymer with dopant ions. Dispersed Ag nanofiller size evaluation study has been done using transmission electron microscopy (TEM) analysis. It was observed that the conductivity increases when increasing the Ag nanofiller concentration. On the addition of Ag nanofiller to the polyethylene oxide (PEO)?+?polyvinyl pyrrolidone (PVP):Li⁺ electrolyte system, it was found to result in the enhancement of ionic conductivity. The maximum ionic conductivity has been set up to be 1.14?×?10^?5 S cm^?1 at the optimized concentration of 4 wt% Ag nanofiller-embedded (45 wt%) polyethylene oxide (PEO)?+?(45 wt%) polyvinyl pyrrolidone (PVP):(10 wt%) Li⁺ polymer electrolyte nanocomposite at room temperature. Polyethylene oxide (PEO)?+?polyvinyl pyrrolidone (PVP):Li⁺ +Ag nanofiller (4 wt%) cell exhibited better performance in terms of cell parameters. This is ascribed to the presence of flexible matrix and high ionic conductivity. The applicability of the present 4 wt% Ag nanofiller-dispersed polyethylene oxide (PEO)?+?polyvinyl pyrrolidone (PVP):Li⁺ polymer electrolyte system could be suggested as a potential candidate for solid-state battery applications. Dielectric constants and dielectric loss behaviours have been studied.     

Dielectric properties and fluctuating relaxation processes of poly(methyl methacrylate) based polymeric nanocomposite electrolytes

Solid polymer nanocomposite electrolytes (SPNEs) consisted of poly(methyl methacrylate) (PMMA) and lithium perchlorate (LiClO₄) of molar ratio C=O:Li⁺=4:1 with varying concentration of montmorillonite (MMT) clay as nanofiller have been prepared by classical solution casting and high intensity ultrasonic assisted solution casting methods. The dielectric/electrical dispersion behaviour of these electrolytes was studied by dielectric relaxation spectroscopy at ambient temperature. The dielectric loss tangent and electric modulus spectra have been analyzed for relaxation processes corresponding to the side groups rotation and the segmental motion of PMMA chain, which confirm their fluctuating behaviour with the sample preparation methods and also with change of MMT concentration. The feasibility of these relaxation fluctuations has been explained using a transient complex structural model based on Lewis acid–base interactions. The low permittivity and moderate dc ionic conductivity at ambient temperature suggest the suitability of these electrolytes in fabrication of ion conducting electrochromic devices and lithium ion batteries. The amorphous behaviour and the exfoliated/intercalated MMT structures of these nanocomposite electrolytes were confirmed by X-ray diffraction measurements.     

Preparation and characterizations of PVAc/P(VdF-HFP)-based polymer blend electrolytes

A novel group of polymer blend electrolytes based on the mixture of poly(vinyl acetate) (PVAc), poly(vinylidene fluoride-hexafluoropropylene) (PVdF-HFP), and the lithium salt (LiClO₄) are prepared by solvent casting technique. Ionic conductivity of the polymer blend electrolytes has been investigated by varying the PVAc and PVdF-HFP content in the polymer matrix. The maximum ionic conductivity has been obtained as 0.527 × 10⁻⁴ Scm⁻¹ at 303 K for PVAc/PVdF-HFP ((25/75) wt.%)/LiClO₄ (8 wt.%). The complex formations ascertained from XRD and FTIR spectroscopic techniques and the thermal behavior of the prepared samples has been performed by DSC analysis. The surface morphology and the surface roughness are studied using SEM and AFM scanning techniques respectively.     

Lithium conducting solid polymer electrolytes based on polyacrylonitrile copolymers: Ion solvation and transport properties

The systems poly(butadiene-co-acrylonitrile) (PBAN) - lithium salts have been studied by means of X-ray and IR spectroscopy, optical microscopy and ac- and dc-conductivity measurements. X-ray and microscopy studies have confirmed that PBAN dissolves LiClO₄ up to [CN]/[Li] ≈ 2: 1. IR spectra of the samples with LiAsF₆, LiCF₃SO₃ and LiClO₄ have indicated the coordination between Li⁺ and the polar CN groups of PBAN. So, PBAN was found to be a suitable polymer matrix for SPE. The polymer films exhibited predominant ionic conductivity. Measurements of conductivity and Li transport numbers versus temperature over a wide range of salt concentrations revealed the existence of two concentration regions (within the limits of salt solubility) corresponding to liquid-like and glass-like ion transport mechanisms. New solid polymer electrolyte with lithium single-ion conductivity of 10⁻³ S cm⁻¹ at 25 – 95 °C was obtained. Paper presented at the 4th Euroconference on Solid State Ionics, Renvyle, Galway, Ireland, Sept. 13–19, 1997     

Polymer electrolytes based on copolymer of poly(ethylene glycol) dimethacrylate and imidazolium ionic liquid

Polymer electrolytes based on the copolymer of N-vinylimidazolium tetrafluoroborate (VyImBF₄) and poly(ethylene glycol) dimethacrylate (PEGDMA) have been prepared. Ethylene carbonate (EC) and LiClO₄ are added to form gel polymer electrolytes. The chemical structure of the samples and the interactions between the various constituents are studied by FT-IR. TGA results show that these polymer electrolytes have acceptable thermal stability, are stable up to 155 °C. Measurements of conductivity are carried out as a function of temperature, VyImBF₄ content in poly(VyImBF₄-co-PEGDMA), and the concentration of EC and LiClO₄. The conductivity increases with PEGDMA and EC content. The highest conductivity is obtained with a value of 2.90 × 10^? 6 S cm^? 1 at room temperature for VP1/EC(25 wt.%)–LiClO₄ system, corresponding to the LiClO₄ concentration of 0.70 mol kg^? 1 polymer.     

Effect of anion of lithium salt on the property of lithium salt-epoxidized natural rubber polymer electrolytes

Lithium salt, LiX (where X = BF ₄ ^? , I^?, CF₃SO ₃ ^? , COOCF ₃ ^? or ClO ₄ ^? ), was incorporated into epoxidized natural rubber (ENR). Thin films of LiX-ENR polymer electrolytes (PEs) were obtained via solvent casting method. These electrolytes were characterized using SEM/X-mapping, FTIR, differential scanning calorimeter, thermogravimetry analysis, and impedance spectroscopy. The trend in thermal stability and ionic conductivity of LiX-ENR PEs follow LiBF₄ > > LiCF₃SO₃ ~ LiCOOCF₃ > LiI > > LiClO₄. The LiClO₄ hardly dissociates and formed LiClO₄ aggregates within the polymer matrix that resulted in a PE with low thermal stability and low ionic conductivity. The LiCF₃SO₃, LiCOOCF₃, and LiI, however, exert moderate interactions with the ENR, and their respective PEs exhibit moderate ionic conductivity and thermal property. The occurrence of epoxide ring opening and complexation or cross-linking reactions in and between the ENR chains that involve BF ₄ ^? ions have produced a LiBF₄-ENR PE with superior thermal property and ionic conductivity as compared to other PEs studied in this work.     

Raman and FTIR spectroscopy study of LiFeTiO<Subscript>4</Subscript> and Li<Subscript>2</Subscript>FeTiO<Subscript>4</Subscript>

We report the Fourier transform infrared (FTIR)–Raman spectroscopy study of spinel Li–Fe–Ti–O oxides viz., LiFeTiO₄ and Li₂FeTiO₄ in order to probe structural details such as type of bonding networks viz., octahedral and tetrahedral, and type of different atomic bonds present in those materials. Both the samples were prepared through solid-state reaction route prior to high-energy ball-milling. All the phases prepared through solid-state reaction and ball-milled were probed using X-ray diffraction, field emission scanning electron microscopy, and FTIR–Raman spectroscopy. X-ray diffraction study indicates spinel phase formation with Fd3m space group symmetry for both LiFeTiO₄ and Li₂FeTiO₄. However, pure phase of Li₂FeTiO₄ was not achieved in these preparation routes, rather mixed phases of Li₂FeTiO₄ and Fe₂TiO₄ were achieved. Field emission scanning electron microscopy (FESEM) analysis indicated porous microstructure for LiFeTiO₄ while more agglomerated microstructure for Li₂FeTiO₄. Ball-milling reduces the grain size partly for both the samples. FTIR–Raman spectroscopy indicates the presence of LiO₄ tetrahedral, LiO₆ and TiO₆ octahedral in the spinel network. Presence of Li–Li–O type bonding was also indicated from spectroscopy analysis. Existence of Fe₂TiO₄ phase with Li₂FeTiO₄ was also identified from both FTIR and Raman spectrum. Effect of ball-milling on the spectrum has been exhibited by broadening and peak shifting the FTIR–Raman spectrum, arising from the enhanced lattice strain and structural disorder.