Well-defined protein-polymer conjugates via in situ RAFT polymerization

Biotechnology, biomedicine, and nanotechnology applications would benefit from methods generating well-defined, monodisperse protein-polymer conjugates, avoiding time-consuming and difficult purification steps. Herein, we report the in situ synthesis of protein-polymer conjugates via reversible addition-fragmentation chain transfer polymerization (RAFT) as an efficient method to generate well-defined, homogeneous protein-polymer conjugates in one step, eliminating major postpolymerization purification steps. A water soluble RAFT agent was conjugated to a model protein, bovine serum albumin (BSA), via its free thiol group at Cys-34 residue. The conjugation of the RAFT agent to BSA was confirmed by UV-visible spectroscopy, matrix-assisted laser desorption ionization--time of flight (MALDI-TOF), and 1H NMR. BSA-macroRAFT agent was then used to control the polymerization of two different water soluble monomers, N-isopropylacrylamide (NIPAAm) and hydroxyethyl acrylate (HEA), in aqueous medium at 25 degrees C. The growth of the polymer chains from BSA-macroRAFT agent was characterized by size exclusion chromatography (SEC), 1H NMR, MALDI-TOF, and polyacrylamide gel electrophoresis (PAGE) analyses. The controlled character of the RAFT polymerizations was confirmed by the linear evolution of molecular weight with monomer conversion. The SEC analyses showed no detectable free, nonconjugated polymer formation during the in situ polymerization. The efficiency of BSA-macroRAFT agent to generate BSA-polymer conjugates was found to be ca. 1 by deconvolution of the SEC traces of the polymerization mixtures. The structural integrity and the conformation-related esterase activity of BSA were found to be unaffected by the polymerization conditions and the conjugation of the polymer chain. BSA-poly(NIPAAm) conjugates showed hybrid temperature-dependent phase separation and aggregation behavior. The lower critical solution temperature values of the conjugates were found to increase with the decrease in molecular weight of poly(NIPAAm) block conjugated to BSA.     

Temperature-regulated activity of responsive polymer-protein conjugates prepared by grafting-from via RAFT polymerization

A facile route to well-defined "smart" polymer-protein conjugates with tunable bioactivity is reported. Protein modification with a reversible addition-fragmentation chain transfer (RAFT) agent and subsequent room temperature polymerization in aqueous media led to conjugates of poly(N-isopropylacrylamide) and a model protein. Representing the first example of polymer-protein conjugation with RAFT agent immobilization via the "R-group" approach, high molecular weight and reductively stable conjugates were accessible without extensive purification or adverse effects on the protein structure. An increase in molecular weight with conversion was observed for the chains grafted from the protein surface, confirming the controlled nature of the polymerization. The responsive behavior of the immobilized polymer facilitated conjugate isolation and also allowed environmental modulation of bioactivity.     

Well‐Defined Polymer–Paclitaxel Prodrugs by a Grafting‐from‐Drug Approach

We report on the design of a polymeric prodrug of the anticancer agent paclitaxel (PTX) by a grafting‐from‐drug approach. A chain transfer agent for reversible addition fragmentation chain transfer (RAFT) polymerization was efficiently and regioselectively linked to the C2′ position of paclitaxel, which is crucial for its bioactivity. Subsequent RAFT polymerization of a hydrophilic monomer yielded well‐defined paclitaxel–polymer conjugates with high drug loading, water solubility, and stability. The versatility of this approach was further demonstrated by ω‐end post‐functionalization with a fluorescent tracer. In vitro experiments showed that these conjugates are readily taken up into endosomes where native PTX is efficiently cleaved off and then reaches its subcellular target. This was confirmed by the cytotoxicity profile of the conjugate, which matches those of commercial PTX formulations based on mere physical encapsulation.     

Synthesis of well-defined conjugated copolymers by RAFT polymerization using cysteine and glutathione-based chain transfer agents

Novel cysteine and glutathione-based chain transfer agents were synthesized and successfully applied to the straightforward synthesis of well-defined conjugates via a RAFT process.     

Trapping of Thiol Terminated Acrylate Polymers with Divinyl Sulfone to Generate Well-Defined Semi-Telechelic Michael Acceptor Polymers

Herein we report the synthesis of vinyl sulfone end functionalized PEGylated polymers by reversible addition-fragmentation chain transfer (RAFT) polymerization for conjugation to proteins. Poly(ethylene glycol) methyl ether acrylate (PEGA) was polymerized in the presence of 1-phenylethyl dithiobenzoate with 2,2'-azobis(2-methylpropionitrile) as the initiator to generate well-defined polyPEGAs with number-average molecular weights (M(n)) by gel permeation chromatography (GPC) of 6.7 kDa, 11.8 kDa and 16.1 kDa. Post-polymerization, the majority of polymer chains contained the dithioester functional group at the omega chain end, and the polydispersity indexes (PDI) of the polymers ranged from 1.08 to 1.24. The dithioester was subsequently reduced via aminolysis, and the resulting thiol was trapped with a divinyl sulfone in situ to produce semi-telechelic, vinyl sulfone polyPEGAs with efficiencies ranging between 85% and 99%. It was determined that the retention of vinyl sulfone was directly related to reaction time, with the maximum dithioester being transformed into a vinyl sulfone within 30 minutes. Longer reaction times resulted in slow decomposition of the vinyl sulfone end group. The resulting semi-telechelic vinyl sulfone polymers were then conjugated to a protein containing a free cysteine, bovine serum albumin (BSA). Gel electrophoresis demonstrated that the reaction was highly efficient and that conjugates of increasing size were readily prepared. After polymer attachment, the activity of the BSA was 92% of the unmodified biomolecule.     

DNA–Polymer Nanostructures by RAFT Polymerization and Polymerization‐Induced Self‐Assembly

Nanostructures derived from amphiphilic DNA–polymer conjugates have emerged prominently due to their rich self‐assembly behavior; however, their synthesis is traditionally challenging. Here, we report a novel platform technology towards DNA–polymer nanostructures of various shapes by leveraging polymerization‐induced self‐assembly (PISA) for polymerization from single‐stranded DNA (ssDNA). A “grafting from” protocol for thermal RAFT polymerization from ssDNA under ambient conditions was developed and utilized for the synthesis of functional DNA–polymer conjugates and DNA–diblock conjugates derived from acrylates and acrylamides. Using this method, PISA was applied to manufacture isotropic and anisotropic DNA–polymer nanostructures by varying the chain length of the polymer block. The resulting nanostructures were further functionalized by hybridization with a dye‐labelled complementary ssDNA, thus establishing PISA as a powerful route towards intrinsically functional DNA–polymer nanostructures.     

Synthesis of Maleimide-End Functionalized Star Polymers and Multimeric Protein-Polymer Conjugates

Protein-polymer conjugates exhibit superior properties to unmodified proteins, generating a high demand for these materials in the fields of medicine, biotechnology, and nanotechnology. Multimeric conjugates are predicted to surpass the activity of monomeric conjugates. Herein, we report a straightforward method to synthesize multimeric polymer-conjugates. Four armed poly(N-isopropylacrylamide) (pNIPAAm) was synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization in the presence of a tetra-functionalized trithiocarbonate chain transfer agent (CTA). The polymer molecular weight, architecture and polydispersity index (PDI) were verified by gel permeation chromatography (GPC), dynamic light scattering gel permeation chromatography (DLS-GPC), and matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry. This approach afforded well-defined polymers (PDI's < 1.06) and the ability to target various molecular weights. Maleimide functional groups were introduced at the chain ends by heating the polymers in the presence of a furan-protected azo-initiator. This allowed for site-specific conjugation of V131C T4 lysozyme to the polymers to generate multimeric protein-polymer conjugates. MALDI-TOF mass spectrometry, electrospray ionization gas-phase electrophoretic-mobility macromolecule analysis (ESI-GEMMA), gel electrophoresis, and liquid chromatography tandem mass spectrometry (LC-MS/MS) of the trypsin digests demonstrated that multimeric protein-polymer conjugates had formed. This simple strategy provides ready access to star protein-polymer conjugates for application in the fields of drug discovery, drug delivery, and nanotechnology.     

Preparation of biodegradable and thermoresponsive enzyme–polymer conjugates with controllable bioactivity via RAFT polymerization

The preparation of biodegradable and thermoresponsive enzyme–polymer bioconjugates with controllable enzymatic activity via reversible addition−fragmentation chain transfer (RAFT) polymerization and amidation conjugation reaction is presented. A new 2-mercaptothiazoline ester functionalized RAFT agent with intra-disulfide linkage was synthesized and used as chain transfer agent (CTA) to generate a biocompatible homopolymer, poly(ethyleneglycol) acrylate (polyPEG-A) and a thermoresponsive copolymer of poly(ethyleneglycol) acrylate with di(ethyleneglycol)ethyl ether acrylate [poly(PEG-A-co-DEG-A)]. These biodegradable and thermoresponsive polymers were then conjugated to the surface of glucose oxidase (GOx) under mild condition to afford the biodegradable and thermoresponsive enzyme–polymer conjugates. Cleavage of the polymer chains from the GOx surface obviously recovered the enzymatic activity. The thermoresponsive test of GOx-poly(PEG-A-co-DEG-A) revealed that the bioconjugate exhibited regular enzymatic activity fluctuation upon the temperature change below or above the lower critical solution temperature (LCST). The as-prepared enzyme–polymer conjugates were also characterized using ¹H NMR, UV–vis spectroscopy, polyacrylamide gel electrophoresis (PAGE) and biocatalytic activity tests. These smart enzyme–polymer conjugates would envision promising applications in biotechnology and biomedicine.     

Cyclic peptide–polymer conjugates: Grafting‐to vs grafting‐from

A systematic comparison between the grafting‐to (convergent) and grafting‐from (divergent) synthetic routes leading to cyclic peptide–polymer conjugates is described. The reversible addition–fragmentation chain transfer (RAFT) process was used to control the polymerizations and the couplings between cyclic peptide and polymer or RAFT agent were performed using N‐hydroxysuccinimide (NHS) active ester ligation. The kinetics of polymerization and polymer conjugation to cyclic peptides were studied for both grafting‐to and grafting‐from synthetic routes, using N‐acryloyl morpholine as a model monomer. The cyclic peptide chain transfer agent was able to mediate polymerization as efficiently as a traditional RAFT agent, reaching high conversion in the same time scale while maintaining excellent control over the molecular weight distribution. The conjugation of polymers to cyclic peptides proceeded to high conversion, and the nature of the carbon at the α‐position to the NHS group was found to play a crucial role in the reaction kinetics. The study was extended to a wider range of monomers, including hydrophilic and temperature responsive acrylamides, hydrophilic and hydrophobic acrylates, and hydrophobic and pH responsive methacrylates. Both approaches lead to similar peptide–polymer conjugates in most cases, while some exceptions highlight the advantages of one or the other method, thereby demonstrating their complementarity. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1003–1011     

Synthesis of dendritic carbohydrate end‐functional polymers via RAFT: Versatile multi‐functional precursors for bioconjugations

Well‐defined pyridyl disulfide (PDS) end‐functionalized polymer‐dendritic carbohydrate scaffolds are reported as novel precursors for the attachment of biomolecules. This synthetic approach combines reversible addition fragmentation chain transfer (RAFT) polymerization and “click” reactions. Poly(N‐(2‐hydroxypropyl) methacrylamide) (PHPMA) with 2‐mercaptothiozalidine end‐groups was prepared by RAFT polymerization yielding molecular weights of M_n = 4300 and 9900, both with a polydispersity of less than 1.2. These polymers were then attached to dendritic mannose scaffolds preconstructed via consecutive “click” reactions. Finally, the ω‐dithiobenzoate RAFT end‐group of PHPMA was modified to yield PDS functionality, by aminolysis in the presence of 2,2′‐dithiodipyridine. This PDS end‐functionalized PHPMA‐dendritic carbohydrate scaffold is a versatile precursor for bioconjugations, as the synthetic procedure can easily accommodate a range of sugar functionalities. In addition, the PDS groups can be used to react with any thiol present in a biomolecule (e.g., cysteine residue in proteins, or ? SH terminal nucleotides). To demonstrate the utility of these scaffolds we describe their bioconjugation to short interfering RNA. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4302–4313, 2009     

SET‐RAFT of MMA mediated by ascorbic acid‐activated copper oxide

In this work, cupric oxide (CuO) or cuprous oxide (Cu₂O) was used as the catalyst for the single electron transfer‐reversible addition‐fragmentation chain transfer (SET‐RAFT) polymerization of methyl methacrylate in the presence of ascorbic acid at 25 °C. 2‐Cyanoprop‐2‐yl‐1‐dithionaphthalate (CPDN) was used as the RAFT agent. The polymerization occurred smoothly after an induction period arising from the slow activation of CuO (or Cu₂O) and the “initialization” process in RAFT polymerization. The polymerizations conveyed features of “living”/controlled radical polymerizations: linear evolution of number‐average molecular weight with monomer conversion, narrow molecular weight distribution, and high retention of chain end fidelity. From the polymerization profile, it was deduced that the polymerization proceeded via a conjunct mechanism of single electron transfer‐living radical polymerization (SET‐LRP) and RAFT polymerization, wherein CPDN acting as the initiator for SET‐LRP and chain transfer agent for RAFT polymerization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Sieving polymer synthesis by reversible addition fragmentation chain transfer polymerization

Replaceable sieving polymers are the fundamental component for high‐resolution nucleic acids separation in CE. The choice of polymer and its physical properties play significant roles in influencing separation performance. Recently, reversible addition fragmentation chain transfer (RAFT) polymerization has been shown to be a versatile polymerization technique capable of yielding well‐defined polymers previously unattainable by conventional free‐radical polymerization. In this study, a high molecular weight poly‐(N,N‐dimethylacrylamide) (PDMA) at 765 000 gmol^?1 with a polydispersity index of 1.55 was successfully synthesized with the use of chain transfer agent—2‐propionic acidyl butyl trithiocarbonate in a multistep sequential RAFT polymerization approach. This study represents the first demonstration of RAFT polymerization for synthesizing polymers with the molecular weight range suitable for high‐resolution DNA separation in sieving electrophoresis. Adjustment of pH in the reaction was found to be crucial for the successful RAFT polymerization of high molecular weight polymer as the buffered condition minimizes the effect of hydrolysis and aminolysis commonly associated with trithiocarbonate chain transfer agents. The separation efficiency of 2‐propionic acidyl butyl trithiocarbonate PDMA was found to have marginally superior separation performance compared to a commercial PDMA formulation, POP?‐CAP, of similar molecular weight range.     

A simple methodology for the synthesis of heterotelechelic protein–polymer–biomolecule conjugates

A synthetic protocol for the preparation of hetero‐biofunctional protein–polymer conjugates is described. A chain transfer agent, S,S‐bis (α,α′‐dimethyl‐α″‐acetic acid) trithiocarbonate was functionalized with α,ω‐pyridyl disulfide (PDS) groups, Subsequently, one of the PDS groups was covalently attached to bovine serum albumin (BSA) at the specific free thiol group on the cysteine residue through a disulfide linkage. The second PDS group remained intact, as it was found to be inaccessible to further BSA functionalization. The BSA‐macro‐reversible addition‐fragmentation chain transfer (RAFT) agent was then used to prepare BSA‐polymer conjugates via in situ polymerization of oligo (ethyleneglycol) acrylate and N‐(2‐hydroxypropyl) methacrylamide using an ambient temperature initiator, 4,4′‐azobis [2,9‐imidazolin‐2‐ethyl)propane] dihydrochloride in an aqueous medium. Sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS‐PAGE) confirmed that the in situ polymerization occurred at the protein surface where the RAFT agent was attached and the molecular weights of the BSA–polymer conjugates were found to increase concomitantly with monomer conversion and polymerization time. After polymerization the remaining terminal PDS groups were then utilized to attach thiocholesterol and a flurophore, rhodamine B to the protein–polymer conjugates via disulfide coupling. UV–Vis and fluorescence analyses revealed that ～80% of the protein conjugates were found to retain integral PDS end groups for further attachment to free thiol‐tethered precursors. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1399–1405, 2010     

Thermoresponsive Block Copolymer–Protein Conjugates Prepared by Grafting‐from via RAFT Polymerization

Well‐defined “smart” block copolymer–protein conjugates were prepared by two consecutive “grafting‐from” reactions via reversible addition–fragmentation chain transfer (RAFT) polymerization. The initiating portion (R‐group) of the RAFT agent was anchored to a model protein such that the thiocarbonylthio moiety was readily accessible for chain transfer with propagating chains in solution. Well‐defined polymer‐protein conjugates of poly(N‐isopropylacrylamide) (PNIPAM) and bovine serum albumin (BSA) were prepared at room temperature in aqueous media. The retained trithiocarbonate moiety on the free end group of the immobilized polymer allowed the homopolymer conjugate to be extended by polymerization of N,N‐dimethylacrylamide. Polyacrylamide gel electrophoresis, size exclusion chromatography, and NMR spectroscopy confirmed the synthesis of the various conjugates and revealed that the polymerizations were well controlled. As expected, the resulting block copolymer–protein conjugates demonstrated thermoresponsive behavior due to the temperature‐sensitivity of the PNIPAM block, as evidenced by turbidity measurements and dynamic light scattering analysis.

     

Well-defined backbone degradable polymer–drug conjugates synthesized by reversible addition-fragmentation chain-transfer polymerization

Despite the recent advances of controlled polymerization methods over the last decades, the lack of backbone degradability of well-defined polymers remains a major synthetic challenge that limits the full exploitation of polymer–drug conjugates (PDCs) in clinical practice. Here, we report the copolymerization of a cyclic ketene acetal (CKA) and a vinyl-based drug-monomer as a proof-of-concept approach to prepare model polyester-based prodrugs via reversible addition-fragmentation chain-transfer (RAFT) polymerization. We demonstrate the versatility of the system toward backbone degradability and control over the chain length while maintaining both low dispersity (Đ_M) and homogenous distribution of degradation points along the main polymer chain. The resulting PDCs exhibit unique self-assembly properties and potent cytotoxicity against pancreatic cancer cells. A methacrylate prodrug is copolymerized with a CKA co-monomer using RAFT polymerization producing a backbone degradable PDC with well-defined molecular structure. The resulting PDC undergoes controlled backbone degradation and produces by-products of narrow dispersity and low toxicity. In addition, it is demonstrated that the insertion of degradation segments does not affect the cytotoxic properties of the PDC under in vitro conditions.     

Kinetic modeling of two-step RAFT process for the production of novel fluorosilicone triblock copolymers

Well-defined poly(dimethylsiloxane)-b-poly(2,2,3,3,4,4,4-heptafluorobutylmethacryl-ate-b-poly(styrene) (PDMS-b-PHFBMA-b-PS) triblock copolymers were prepared by two-step reversible addition-fragmentation chain transfer (RAFT) polymerization. A comprehensive mathematical model for the two-step RAFT polymerization in a batch reactor was presented using the method of moments. The model described molecular weight, monomer conversion and polydispersity index as a function of polymerization time. Good agreements in the polymerization kinetics were achieved for fitting the kinetic profiles with the suggested model. In addition, the model was used to predict the effects of initiator concentration, chain transfer agent concentration and monomer concentration on the two-step RAFT polymerization kinetics. The simulated results showed that for the two-step RAFT polymerizations, the effects initiator concentration, chain transfer agent concentration and monomer concentration are identical and the influence degrees are different yet.     

PET‐RAFT as a facile strategy for preparing functional lipid–polymer conjugates

From readily available starting materials, we report a facile synthesis of lipid–polymer conjugates (LPCs). Easy access to multigram quantities of a dialkyl lipid chain transfer agent allows a range of LPCs to be prepared bearing well‐defined hydrophilic polymer head‐groups, controlled molecular weights and low dispersity by photoelectron transfer RAFT polymerization (PET‐RAFT). As dictated by the lipid packing parameters, the resulting LPCs were suitable for solution‐phase self‐assembly, both independently and in combination with naturally occurring phospholipids, affording micelles, smaller vesicle‐like structures, or stabilized large unilamellar vesicles. Notably, co‐assembly of LPCs and phospholipids bearing mutually orthogonal fluorophores showed negligible phase separation/aggregation. To demonstrate the versatility of these LPCs, the RAFT chain‐end was removed, affording thiol‐terminated LPCs that could be used for the manipulation and stabilization of gold nanoparticle assemblies. Facile access to structurally diverse LPC building blocks enables a variety of biotechnology and biomedical applications, including drug‐delivery, cell engineering, and 3D‐printed biomaterials. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1259–1268     

Aqueous RAFT polymerization of N‐isopropylacrylamide‐mediated with hydrophilic macro‐RAFT agent: Homogeneous or heterogeneous polymerization?

Aqueous RAFT polymerization of N‐isopropylacrylamide (NIPAM) mediated with hydrophilic macro‐RAFT agent is generally used to prepare poly(N‐isopropylacrylamide) (PNIPAM)‐based block copolymer. Because of the phase transition temperature of the block copolymer in water being dependent on the chain length of the PNIPAM block, the aqueous RAFT polymerization is much more complex than expected. Herein, the aqueous RAFT polymerization of NIPAM in the presence of the hydrophilic macro‐RAFT agent of poly(dimethylacrylamide) trithiocarbonate is studied and compared with the homogeneous solution RAFT polymerization. This aqueous RAFT polymerization leads to the well‐defined poly(dimethylacrylamide)‐b‐poly(N‐isopropylacrylamide)‐b‐poly(dimethylacrylamide) (PDMA‐b‐PNIPAM‐b‐PDMA) triblock copolymer. It is found, when the triblock copolymer contains a short PNIPAM block, the aqueous RAFT polymerization undergoes just like the homogeneous one; whereas when the triblock copolymer contains a long PNIPAM block, both the initial homogeneous polymerization and the subsequent dispersion polymerization are involved and the two‐stage ln([M]_o/[M])‐time plots are indicated. The reason that the PNIPAM chain length greatly affects the aqueous RAFT polymerization is discussed. The present study is anticipated to be helpful to understand the chain extension of thermoresponsive block copolymer during aqueous RAFT polymerization. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of Cobalt Bis(Dicarbollide)—Curcumin Conjugates for Potential Use in Boron Neutron Capture Therapy

A series of novel cobalt bis(dicarbollide)—curcumin conjugates were synthesized. Two conjugates were obtained through the nucleophilic ring-opening reaction of the 1,4-dioxane and tetrahydropyran derivatives of cobalt bis(dicarbollide) with the OH group of curcumin, and using two equiv. of the oxonium derivatives, two other conjugates containing two cobalt bis(dicarbollide) units per molecule were obtained. In contrast to curcumin, the conjugates obtained were found to be non-cytotoxic against both tumor and normal cell lines. The analysis of the intracellular accumulation of the conjugates by flow cytometry showed that all cobalt bis(dicarbollide)—curcumin conjugates entered HCT116 colorectal carcinoma cells in a time-dependent manner. New non-cytotoxic conjugates contain a large amount of boron atoms in the biomolecule and can potentially be used for further biological research into boron neutron capture therapy (BNCT).     

In Situ Synthesis of Block Copolymer Nano-assemblies by Polymerization-induced Self-assembly under Heterogeneous Condition

Controlled synthesis of amphiphilic block copolymer nanoparticles in a convenient way is an important and interest topic in polymer science. In this review, three formulations of polymerization-induced self-assembly to in situ synthesize block copolymer nanoparticles are briefly introduced, which perform by reversible addition-fragmentation chain transfer(RAFT) polymerization under heterogeneous conditions, e.g., aqueous emulsion RAFT polymerization, dispersion RAFT polymerization and especially the recently proposed seeded RAFT polymerization. The latest developments in several selected areas on the synthesis of block copolymer nano-assemblies are highlighted.