Simultaneous Determination of Iron,Copper, and Cadmium by Adsorptive Stripping Voltammetry in the Presence of Thymolphthalexone

A novel, sensitive and selective adsorptive stripping procedure for simultaneous determination of iron, copper and cadmium is presented. The method is based on the adsorptive accumulation of thymolphthalexone (TPN) complexes of these elements onto a hanging mercury drop electrode, followed by reduction of adsorbed species by voltammetric scan using differential pulse modulation. The influences of control variables on the sensitivity of the proposed method for the simultaneous determination of iron, copper and cadmium were studied using the Derringer desirability function. The optimum analytical conditions were found to be TPN concentration of 2.0 μM, pH of 9.5, and accumulation potential at ?0.4 V vs. Ag/AgCl with an accumulation time of 60 s. The peak currents are proportional to the concentration of iron, copper and cadmium over the 1–80, 0.5–100 and 1–100 ng mL^?1 ranges with detection limits of 0.5, 0.4 and 0.9 ng mL^?1_, respectively. The R.S.D. at a concentration level of 20 ng mL^?1 of iron, copper and cadmium were 2.5%, 0.9% and 1.5% (n=6), respectively. The procedure was applied to the simultaneous determination of iron, copper and cadmium in the tap water and some synthetic samples with satisfactory results.     

Extracting stoichiometry, thermodynamics, and kinetics for the interaction of DNA with cadmium ion by capillary electrophoresis on-line coupled with electrothermal atomic absorption spectrometry

Understanding the binding of cadmium with DNA is of great importance for elucidating the mechanism of cadmium genotoxicity and carcinogenicity. In the present work, CE on-line coupled with electrothermal atomic absorption spectrometry was employed to study the binding electrophoretic behaviors, stoichiometry, thermodynamics, and kinetics for the interaction of cadmium cation (Cd(II)) with DNA. The stoichiometry (Cd(II) to DNA (as the concentration of base pairs)) for the interaction was determined to be 1:5. Two types of binding sites on DNA were observed with the binding constants of 10(6) and 10(5) L/mol, respectively, showing strong affinity of Cd(II) to DNA. The interaction of Cd(II) with both types of binding sites on DNA were driven by negative enthalpy change with a large positive entropy change. The binding of Cd(II) to DNA followed a first-order kinetics for Cd(II) with the apparent activation energy of 45.7 +/- 1.9 kJ/mol. The results obtained in present investigation would be helpful to understanding the genotoxicity and carcinogenicity of cadmium.     

Solid-phase extraction and determination of ultra trace amounts of lead,mercury and cadmium in water samples using octadecyl silica membrane disks modified with 5,5′-dithiobis(2-nitrobenzoic acid) and atomic absorption spectrometry

A simple and fast method for preconcentration and determination of ultra trace amounts of lead(II), mercury(II) and cadmium(II) in water samples is presented. Lead, mercury and cadmium adsorbed quantitatively during passage of water samples (pH?=?7, flow rate?=?20 mL min^?1) through octadecyl silica membrane disks modified with 5,5′-dithiobis(2-nitrobenzoic acid). The retained lead, mercury and cadmium are then stripped from the disk with a minimal amount of 1 M hydrochloric acid solution as eluent, and determined by atomic absorption spectrometry. The influence of flow rates of the eluent and sample solution, the amount of ligand, type and least amount of eluent, pH of sample, effect of other ions and breakthrough volume are determined. The breakthrough volume of the method is greater than 2000 mL for lead and greater than 1500 mL for mercury and cadmium, which results in an enrichment factor of 200 for lead and an enrichment factor of 150 for both mercury and cadmium. The limit of detection of the proposed method is 177, 2 and 13 ng l^?1 for lead, mercury and cadmium, respectively.     

Spectrophotometric determination of micro amounts of mercury,cadmium, and zinc by stepwise extraction with tribenzylamine

A rapid spectrophotometric method has been developed for the stepwise determination for mercury, cadmium, and zinc in mixtures. Optimal conditions have been established for the extraction efficiency of cadmium and mercury with a chloroform solution of tribenzylamine pre-equilibrated with hydrobromic acid. After addition of dithizone solution to the organic layers the absorbance at 490 nm or 510 nm is measured for mercury or cadmium, respectively. Even when the ratio of mercury, cadmium, and zinc is 10^-1 : 1 : 10^-5 , the metals can be determined successively.     

Determination of cadmium, copper, lead and zinc in water samples by flame atomic absorption spectrometry after cloud point extraction

Cloud point extraction (CPE) has been used for the simultaneous pre-concentration of cadmium, copper, lead and zinc after the formation of a complex with 1-(2-thiazolylazo)-2-naphthol (TAN), and later analysis by flame atomic absorption spectrometry (FAAS) using octylphenoxypolyethoxyethanol (Triton X-114) as surfactant. The chemical variables affecting the separation phase and the viscosity affecting the detection process were optimized. At pH 8.6, pre-concentration of only 50 ml of sample in the presence of 0.05% Triton X-114 and 2×10⁻⁵ mol l⁻¹ TAN permitted the detection of 0.099, 0.27, 1.1 and 0.095 ng ml⁻¹ cadmium, copper, lead and zinc, respectively. The enhancement factors were 57.7, 64.3, 55.6 and 63.7 for cadmium, copper, lead and zinc, respectively. The proposed method has been applied to the determination of cadmium, copper, lead and zinc in water samples and a standard reference material (SRM).     

Dynamics of mononuclear cadmium beta-lactamase revealed by the combination of NMR and PAC spectroscopy

The two metal sites in cadmium substituted beta-lactamase from Bacillus cereus 569/H/9 have been studied by NMR spectroscopy ((1)H, (15)N, and (113)Cd) and PAC spectroscopy ((111m)Cd). Distinct NMR signals from the backbone amides are identified for the apoenzyme and the mononuclear and binuclear cadmium enzymes. For the binuclear cadmium enzyme, two (113)Cd NMR signals (142 and 262 ppm) and two (111m)Cd PAC nuclear quadrupole interactions are observed. Two nuclear quadrupole interactions are also observed, with approximately equal occupancy, in the PAC spectra at cadmium/enzyme ratios < 1; these are different from those derived for the binuclear cadmium enzyme, demonstrating interaction between the two metal ion binding sites. In contrast to the observation from PAC spectroscopy, only one (113)Cd NMR signal (176 ppm) is observed at cadmium/enzyme ratios < 1. The titration of the metal site imidazole (N)H proton signals as a function of cadmium ion-to-enzyme ratio shows that signals characteristic for the binuclear cadmium enzyme appear when the cadmium ion-to-enzyme ratio is between 1 and 2, whereas no signals are observed at stoichiometries less than 1. The simplest explanation consistent with all data is that, at cadmium/enzyme ratios < 1, the single Cd(II) is undergoing exchange between the two metal sites on the enzyme. This exchange must be fast on the (113)Cd NMR time scale and slow on the (111m)Cd PAC time scale and must thus occur in a time regime between 0.1 and 10 micros.     

Improved separation of cadmium from indium,zinc, gallium and other elements by anion-exchange chromatography in hydrobromic nitric acid mixtures

The separation of cadmium from indium, zinc and many other elements is considerably improved by eluting these elements with 0.1 M hydrobromic–0.5 M nitric acid solution from a column of AG1-X8 resin. Cadmium is retained very strongly and can be eluted with 2 M nitric acid or 1 M ammonia–0.2 M ammonium nitrate solution. Separations are sharp and quantitative and from microgram amounts up to 2 g of indium and zinc are separated from amounts of cadmium ranging from micrograms up to 100 mg on a 2-g (4.6 ml) resin column. Ga(II), Fe(III). Mn(II), Co(II), U(VI) and Ni(II) can be separated quantitatively from cadmium in the same way. The behaviour of numerous elements is discussed, with special attention to lead, and relevant elution curves and results from the analysis of synthetic mixtures are presented.     

Manual and fia methods for the determination of cadmium with malachite green and iodide

A sensitive and rapid spectrophotometric method for the determination of cadmium is described, based on the formation of a blue complex at pH 4 between the anionic iodide complex of cadmium(II) and Malachite Green; the colour is stabilized with poly(vinyl alcohol). The calibration graph for measurement at 685 nm is linear over the range 1-50 mug of cadmium per 25 ml of final solution, with a relative standard deviation of +/-1.7% for 1 mug/ml cadmium. The molar absorptivity is 6.1 x 10(4) 1.mole(-1).cm(-1). The method can be successfully adapted for FIA, the peak height being proportional to the cadmium concentration over the range 0.1-3 mug/ml; a two-channel manifold is used and an improvement in selectivity is obtained. The use of a gradient tube is demonstrated to give a good calibration for Cd(II) over the range 2 x 10(-2) -2 x 10(-6)M.     

Polarographic and potentiometric determination of the stability constants of lead, cadmium and zinc complexes with dithiocarbaminoacetic acid

The stability constants of lead, cadmium and zinc dithio-carbaminoacetic acid (TCA) complexes have been determined. Lead and cadmium TCA complexes were studied by means of a polarographic method. A competitive polarographic method was used for the study of zinc TCA complexes. Zinc and cadmium TCA complexes were also studied potentiometrically with an amalgam electrode. The stability constants found were: lead, log beta(2) = 13.2; cadmium, log beta(1) = 5.4 (pot.), log beta(2) = 9.3 (pot.), log beta(3) = 13.7 (pot.), 13.6 (pol.); zinc, logbeta(1) = 3.4(pot.), <3.8(pol.), logbeta(2) = 6.6 (pot.), 6.4(pol.), logbeta(3) = 8.9 (pot.), 9.3 (pol.).     

Experimental evidence for a variable first coordination shell of the cadmium(II) ion in aqueous, dimethyl sulfoxide, and N,N'-dimethylpropyleneurea solution

A combined extended X-ray absorption fine structure (EXAFS) and large angle X-ray scattering (LAXS) investigation has been performed to evaluate the coordination structure of the cadmium(II) ion in aqueous, dimethyl sulfoxide, and N,N'-dimethylpropyleneurea (dmpu) solutions. This approach has singled out the existence of a flexible coordination shell around the cadmium(II) ion in aqueous and dimethyl sulfoxide solutions, whereas a regular octahedral complex is detected in dmpu. The EXAFS and LAXS techniques provide different values of the Cd-O first shell distance (2.27(1) A and 2.302(5) A, respectively) for the hydrated and dimethyl sulfoxide solvated complexes, and this discrepancy is originated by the simultaneous presence of hexa- and heptacoordinated complexes in solution, giving rise to a broad distribution of distances around the ion. These findings demonstrate that, in solution, the cadmium(II) ion forms quite flexible hydration and dimethyl sulfoxide solvate complexes undergoing a solvent exchange with unusually stable seven-coordinated intermediate complexes, and therefore the mean ion-solvent distance is longer in solution than in the solid state. In the dmpu solution, due to the bulkiness of the solvent molecules, the octahedral cadmium(II) solvate is extremely crowded and it is not possible for a seventh ligand to enter the inner-coordination shell. This investigation shows that the combined analysis of the EXAFS and LAXS data allows a reliable determination of the structural properties of electrolyte solutions, also in the presence of flexible coordination shell with a variable number of coordinating molecules.     

Determination of Stability Constants of Cadmium(II) Complexes with Diallyl Disulfide,Dimethyl Disulfide and Diallyl Sulfide Using Differential Pulse Voltammetry

The study of the binding of heavy metal ions by organosulfur compounds of garlic is especially important for the understanding of many biological systems. Cadmium is a non-essential heavy metal known to be one of the most toxic environmental pollutant.Interactions between cadmium and diallyl disulfide (DADS), dimethyl disulfide (DMDS) and diallyl sulfide (DAS) were investigated by differential pulse voltammtery. Determination of the stability constants of cadmium(II) with DADS, DMDS and DAS complexes was based on the DeFord–Hume methodology that calculated from the dependence of the shift of cadmium( II) peak potential upon addition of the ligands DADS, DMDA and DAS separately. The results of this study provide evidence of the formation of 1: 1 and 1: 2 complexes between cadmium(II) and DADS, DMDS and DAS with stability constants (β) in the range of ca. 10^5.8–10^6.2 and 10^9.6–10^10.6 respectively.     

Determination of copper,nickel, and cadmium in sea water by apdc chelate coprecipitation and flameless atomic absorption spectrometry

Copper, nickel, and cadmium can be determined in 100 ml of sea water by coprecipitation with cobalt pyrrolidinedithiocarbamate and graphite atomizer atomic absorption spectrometry. Concentration ranges likely to be encountered and estimated (1 σ ) analytical precisions are 1–6 nmol kg^-1 (±0.1) for copper, 3–12 nmol kg^-1 (±0.3) for nickel and 0.0–1.1 nmol kg^-1 (±0.1) for cadmium. The technique may be applied to fresh-water samples with slight modification.     

过敏性哮喘患者血清中镉铅铍含量的探讨

３４例过敏性哮喘患者血清中镉，铅，铍的含量与对照组比较，研究结果揭示：（１）铍的含量明显升高，差异有高度显著性，Ｐ〈０．０１；（２）镉和铅的含量明显下降，差异有高度显著性，Ｐ〈０．０１。     

Determination of selenium, zinc and cadmium in antidandruff shampoos by atomic spectrometry after microwave assisted sample digestion

Microwave assisted pre-treatments for atomic spectrometric determination (inductive coupled plasma-optical emission spectrometry, ICP-OES or flame atomic absorption spectrometry, FAAS) of metallic elements, usually present in antidandruff shampoos, are proposed. They are based on the digestion of the sample with HNO₃ into a closed reactor, which is irradiated at 800 W for a few minutes. Selenium was determined by ICP-OES. The limit of detection was 0.11 mg l⁻¹; the relative standard deviation (R.S.D.) for the selenium content in the samples was in the 0.6–3.6% range. The results obtained were in agreement with the label contents and the recovery of the proposed method was in the 100–106% range. Zinc and cadmium were determined by FAAS. The limit of detection for zinc determination was 0.078 mg l⁻¹; the R.S.D. for zinc contents was in the 0.8–8.6% range. A limit of detection of 0.09 mg l⁻¹ was obtained for cadmium determination; the R.S.D. for cadmium contents was in the 0.7–2.7% range. The determinations were performed after two different sample mineralization pre-treatments — dry ashing (in an electric furnace) and wet mineralization (in a microwave oven). Both methodologies provided comparable results for zinc and cadmium determination in shampoos. The proposed microwave assisted digestion procedures allow a precise and accurate determination of selenium, zinc and cadmium in commercial antidandruff shampoos, and the sample pre-treatment is less time-consuming than the classic methods.     

Synthesis,characterization, and crystal structures of two new divalent metal complexes of N,N'-bis(phosphonomethyl)-1,10-diaza-18-crown-6: a hydrogen-bonded 1D array and a 3D network with a large channel

Reaction of N,N'-bis(phosphonomethyl)-1,10-diaza-18-crown-6 (H(4)L) with copper(II) acetate in 1:1 ethanol/water mixed solvents afforded a new crystal-engineered supramolecular metal phosphonate, Cu(H(2)L) (complex 1). By reaction of the same ligand with cadmium(II) nitrate in a 2:1 (M/L) ratio in methanol, a cadmium(II) complex with a 3D network structure was isolated, Cd(2.75)(L)(H(2)O)(7) x 1.5NO(3) x 7H(2)O x MeOH (complex 2). The copper(II) complex crystallized in the monoclinic space group P2(1)/c, with a =10.125(4), b = 14.103(6), and c = 14.537(6) A, beta = 91.049(8) degrees, V = 2075.4(16) A(3), and Z = 2. The Cu(II) ions in complex 1 are 6-coordinated by two phosphonate oxygen atoms, two nitrogen, and two oxygen atoms from the crown ether ring. Their coordination geometry can be described as Jahn-Teller-distorted octahedral, with elongated Cu-O(crown) distances (2.634(4) and 2.671(4) A for Cu(1) and Cu(2), respectively). The other two crown oxygen atoms remain uncoordinated. Neighboring two Cu(H(2)L) units are further interlinked via a pair of strong hydrogen bonds between uncoordinated phosphonate oxygen atoms, resulting in a one-dimensional supramolecular array along the a axis. The cadmium(II) complex is tetragonal, P4(2)/n (No. 86) with a = 20.8150(9) and c = 18.5846(12) A, V = 8052.0(7) A(3), and Z = 8. Among four cadmium(II) atoms in an asymmetric unit, one is 8-coordinated by four chelating phosphonate groups, the second one is 8-coordinated by 6 coordination atoms from a crown ring and two oxygen atoms from two phosphonate groups, the third Cd(II) atom is octahedrally coordinated by three aqua ligands and three phosphonate oxygen atoms from three phosphonate groups, and the fourth one is 6-coordinated by four aqua ligands and two oxygen atoms from two phosphonate groups in a distorted octahedral geometry. These cadmium atoms are interconnected by bridging phosphonate tetrahedra in such a way as to form large channels along the c direction, in which the lattice water molecules, methanol solvent, and nitrate anions reside. The effect of extent of deprotonation of phosphonic acids on the type of complex formed is also discussed.     

Determination of chloramphenicol in pharmaceutical preparations by the cadmium ion-selective electrode, spectrophotometry and atomic-absorption spectrometry

New simple methods are described for the determination of chloramphenicol and its esters in pure powders, suppositories, injections, eye-drops, capsules and oral suspensions. These are based on reduction with cadmium metal whereby 6 equivalents of cadmium ions per mole and the corresponding amino-derivative are released. Four portions of the reduction products are used for (i) measurement of the cadmium ions by atomic-absorption spectrometry at 228.8 nm; (ii) potentiometric titration with EDTA, with use of the cadmium ion-selective electrode; (iii) visual titration with EDTA, with Eriochrome Black T as indicator, (iv) diazotization and coupling with N-(1-naphthyl)ethylenediamine and measuring the resultant colour at 550 nm. The results obtained by these procedures are in good agreement, and compare favourably with those of the official methods.     

Simultaneous Spectrophotometric Determination of Cadmium, Zinc and Copper with Kalman Filter

The compound 2-QADNm can form red complexes with caamium(II), zinc(II) and copper(II). The simultaneous determination of cadmium, zinc and copper with Kalman Filter is described in this paper, the proposed method was applied to a two-component system for determining cadmium and copper,and a three-component system for determining cadmium, zinc and copper.     

Synthesis,Structure and Thermal Stability of a Cadmium Coordination Polymer：[Cd（phen）（4,6-dimethyl-5-nitro-isophthalic Acid）]_n

One cadmium(Ⅱ)coordination polymer [Cd(phen)(4,6-dimethyl-5-nitro-isophtha-lic acid)]n(1)has been synthesized with 4,6-dimethyl-5-nitro-isophthalic acid,phen(phen = 10-phenanthroline),and cadmium nitrate in the mixture of DMSO:H2O(V:V = 2:1).Crystallogra-phic data for this complex:monoclinic,space group P21/c,with a = 11.668(2),b = 11.841(6),c = 14.446(2),β = 102.440(4)°,V = 1.9491(8)3,Dc = 1.805 g/cm3,Z = 1,F(000)= 1056,GOOF = 0.999,R = 0.0280 and wR = 0.0662.The crystal structure analysis indicates that the cadmium ion is coordinated with two nitrogen atoms of one 1,10-phenanthroline molecule and five oxygen atoms from three 4,6-dimethyl-5-nitro-isophthalic acid molecules.The curve of TGA shows that 1 is stable up to 380.0 ℃.     

Removal of p-aminophenol and p-nitrophenol from aqueous solution through adsorption on antimony, cadmium, and zirconium ferrocyanides

Adsorptive interaction of p-aminophenol and p-nitrophenol in the concentration range 10(-4)-10(-5) M and at room temperature (30+/-1 degrees C) was studied with antimony, cadmium, and zirconium ferrocyanides. The interaction followed the Langmuir type of adsorption in general. The p-nitrophenol was found to have greater affinity for the antimony, cadmium, and zirconium ferrocyanides then the p-aminophenol.