Liquid-liquid extraction of zinc from aqueous thiocyanate solutions with 5-(-4-pyridyl)nonane in benzene

5-(4-Pyridyl)nonane dissolved in benzene has been applied to the extraction of zinc, down to very low concentration (< 10(-6)M), from aqueous thiocyanate solutions. The metal can be quantitatively extracted from neutral and acidic thiocyanate solutions (up to 5M HCl, 0.25M HNO(3) or 0.25M H(2)SO(4)) in a single extraction. Equilibration times of 5 min are sufficient for almost complete extraction. The optimum thiocyanate concentration range is 0.05-0.5M. Among the common anions chloride exerts a slight depressing effect on extraction from neutral solution when present in high concentration. The extraction mechanism and the composition of the extracted complexes of zinc are discussed. The metal is predominantly extracted by means of a solvate mechanism. The effect of chloride, nitrate, sulphate, acetate, citrate, oxalate and ascorbate ions on the extraction of zinc is described. Several elements, including those of interest in separation of zinc, have been tested for extraction from O.1M KSCN at the optimal concentrations of the mineral acids, and the separation factors estimated.     

Extraction of zinc, cadmium and mercury salicylates

A systematic study of the solvent extraction of Zn, Cd and Hg salicylates is reported. Optimum conditions for extraction and separation of Zn, Cd and Hg are evaluated from a critical study of pH, sodium salicylate concentration, mesityl oxide concentration, period of equilibration, and effect of diverse ions. A separation scheme is described and results are reported for analysis of synthetic mixtures and commercial samples.     

Extraction and separation studies of uranium/VI/with tris-/2-ethyl hexyl/phosphate

A solvent extraction method is proposed for the extraction and separation of uranium from salicylate media using tris-/2-ethyl hexyl/ phosphate dissolved in xylene as an extractant. The optimum conditions were evaluated from a critical study of pH, salicylate concentration, extractant concentration, period of equilibration and diluent. The method permits the separation of uranium from thorium, cerium, titanium, zirconium, hafnium, copper, vanadium and chromium from binary mixtures and is applicable to the analysis of uranium in synthetic samples. The method is precise, accurate, fast and selective.     

Liquid-liquid distribution studies of thorium salicylate with tris-(2-ethylhexyl)phosphate

A method is proposed for the extraction of thorium(IV) from salicylate media using tris-(2-ethylhexyl)phosphate dissolved in toluene as an extractant. The optimum conditions were evaluated from a critical study of pH, salicylate concentration, extractant concentration, period of equilibration and diluent. The method permits the separation of thorium from the associated elements and is applicable to the analysis of monazite sand. The method is precise, accurate, fast and selective.     

Extraction of cadmium,lead, cobalt,copper, and zinc ions from aqueous solutions into hydrophilic–hydrophobic ionic liquids

Extraction of cadmium(II), lead(II), cobalt(II), copper(II), and zinc(II) into ionic liquids tetraoctylammonium N-lauroyl sarcosinate and trioctylmethylammonium salicylate is studied. Cadmium(II), lead(II), copper(II) in tetraoctylammonium N-lauroyl sarcosinate and copper(II) in trioctylmethylammonium salicylate are quantitatively extracted from neutral and weakly alkaline solutions in the absence of additional reagents. The effect of the composition of aqueous and organic phases, as well as the contact time, on metal extraction is investigated.     

Liquid-liquid extraction of mercury(II) with triphenylphosphine sulphide: Application to medicinal and environmental samples

A method is proposed for the separation and determination of mercury(II) in environmental samples after its extraction from salicylate solution using triphenylphosphine sulphide (TPPS) as an extractant. The extraction conditions are optimized and reported. The nature of the extracted species is ascertained by a plot of log of distribution ratio versus log of concentration of salicylate and TPPS.     

Extraction separation of thallium (III) from thallium (I) with n-octylaniline

A novel method is developed for the extraction separation of thallium(III) from salicylate medium with n-octylaniline dissolved in toluene as an extractant. The optimum conditions have been determined by making a critical study of weak acid concentration, extractant concentration, period of equilibration and effect of solvent on the equilibria. The thallium (III) from the pregnant organic phase is stripped with acetate buffer solution (pH 4.7) and determined complexometrically with EDTA. The method affords the sequential separation of thallium(III) from thallium(I) and also commonly associated metal ions such as Al(III), Ga(III), In(III), Fe(III), Bi(III), Sb(III) and Pb(II). It is used for analysis of synthetic mixtures of associated metal ions and alloys. The method is highly selective, simple and reproducible. The reaction takes place at room temperature and requires 15-20 min for extraction and determination of thallium(III).     

Liquid–liquid extraction of uranium(VI) using cyanex 272 in toluene from sodium salicylate medium

Liquid–liquid extraction and separation studies of uranium have been carried out from sodium salicylate media using cyanex 272 in toluene. Uranium was quantitatively extracted by 1 × 10⁻³ M sodium salicylate with 5 × 10⁻⁴ M cyanex 272 in toluene. The extracted uranium(VI) was stripped out quantitatively from the organic phase with 1.0 M hydrochloric acid and determined spectrophotometrically with arsenazo(III) at 660 nm. The effect of concentration of sodium salicylate, extractant, diluents, metal ion and strippants has been studied. Separation of uranium(VI) from other elements was achieved from binary as well as from multicomponent mixtures. The method was extended for the separation and determination of uranium(VI) in geological samples. The method is simple, rapid and selective with good reproducibility (approximately ± 2%).     

Extraction and separation of uranium and lead with liquid anion-exchangers

A method is proposed for the extraction and separation of microgram amounts of uranium(VI) and lead(II) from sodium salicylate solution with high molecular-weight amines such as Aliquat 336, TOA, TIOA, Amberlite LA-1 or Amberlite LA-2 dissolved in xylene. From a critical study of pH, salicylate concentration, amine concentration, diluent and period of equilibration, the optimum conditions were identified. The method permits separation of uranium and lead from binary mixtures with metal ions commonly associated with them, the determination of uranium, and of lead in air samples.     

Synergic extraction of zinc, cadmium and lead with hexafluoroacetylacetone and di-n-butylsulphoxide and tri-n-butyl phosphate, and the gas chromatography of the zinc adduct

The synergic solvent extraction of zinc(II), cadmium(II), and lead(II) with 1,1,1,5,5,5-hexafluoro-2,4-pentanedione, H(HFA), and tri-n-butyl phosphate (TBP) or di-n-butylsulphoxide (DBSO) as neutral donors, into cyclohexane has been investigated. Quantitative extraction occurs at pH 4.5-6.0 in extraction times of 10-30 min, depending on the metal species. The optimum pH, equilibration time, stoichiometry and stability of the extracted species, as well as the effect of fluorinated beta-diketone concentration, metal concentration and neutral donor concentration on the extraction are reported. The extracted species was found to be M(HFA)(2).2DBSO or M(HFA)(2).2TBP by mass-action studies. Thermogravimetric analysis of the complexes is reported. The gas chromatographic behaviour of the ternary complexes of the three metals has also been studied. A calibration plot of peak area vs. the amount of zinc injected was linear over the range 40-900 ng of zinc for the Zn(HFA)(2). 2DBSO species; the cadmium and lead species apparently decomposed on the column and useful chromatographic peaks were not observed. The calibration plot for zinc was determined on the basis of the averages of 3-5 replicate determinations for 14 different concentrations over the range stated. The average relative standard deviation was 2.9%.     

Tris(2-ethylhexyl)phosphate as an extractant for trivalent gallium, indium and thallium

A systematic study of solvent extraction behaviour of gallium(III), indium(III) and thallium(III) with tris(2-ethylhexyl)phosphate from salicylate media has been undertaken and a scheme for their separation is proposed. The optimum extraction conditions are evaluated and described. The method is applicable to the analysis of standard aluminium and aluminium alloys samples. The results obtained are reproducible and accurate.     

Liquid-liquid extraction of mercury(II) with triphenylphosphine sulphide: Application to medicinal and environmental samples

A method is proposed for the separation and determination of mercury(II) in environmental samples after its extraction from salicylate solution using triphenylphosphine sulphide (TPPS) as an extractant. The extraction conditions are optimized and reported. The nature of the extracted species is ascertained by a plot of log of distribution ratio versus log of concentration of salicylate and TPPS. Received: 22 January 1997 / Revised: 7 May 1997 / Accepted: 10 May 1997     

Solvent extraction of zinc by trilaurylamine N-oxide

The solvent extraction behaviour of zinc from aqueous hydrochloric acid solutions using trilaurylamine N-oxide in toluene has been studied. The distribution ratios have been studied as a function of concentration of acid and extractant. The effects of foreign agents such as nitrate, sulphate, chloride, acetate, citrate, oxalate, and ascorbic acid on the extraction of zinc from hydrochloric acid solution are also determined.     

Quantitative separation of zinc traces from cadmium matrices by solid-phase extraction with polyurethane foam

A system for separation of zinc traces from large amounts of cadmium is proposed in this paper. It is based on the solid-phase extraction of the zinc in the form of thiocyanate complexes by the polyurethane foam. The following parameters were studied: effect of pH and of the thiocyanate concentration on the zinc extraction, shaking time required for quantitative extraction, amount of PU foam necessary for complete extraction, conditions for the separation of zinc from cadmium, influence of other cations and anions on the zinc sorption by PU foam, and required conditions for back extraction of zinc from the PU foam. The results show that zinc traces can be separated from large amounts of cadmium at pH 3.0±0.50, with the range of thiocyanate concentration from 0.15 to 0.20 mol l⁻¹, and the shaking time of 5 min. The back extraction of zinc can be done by shaking it with water for 10 min. Calcium, barium, strontium, magnesium, aluminum, nickel and iron(II) are efficiently separated. Iron(III), copper(II) and cobalt(II) are extracted simultaneously with zinc, but the iron reduction with ascorbic acid and the use of citrate to mask copper(II) and cobalt(II) increase the selectivity of the zinc extraction. The anions nitrate, chloride, sulfate, acetate, thiosulphate, tartarate, oxalate, fluoride, citrate, and carbonate do not affect the zinc extraction. Phosphate and EDTA must be absent. The method proposed was applied to determine zinc in cadmium salts using 4-(2-pyridylazo)-resorcinol (PAR) as a spectrophotometric reagent. The result achieved did not show significant difference in the accuracy and precision (95% confidence level) with those obtained by ICP–AES analysis.     

Determination of salicylate in beverages and cosmetics by use of an amperometric biosensor

A fast and selective enzymatic method for the determination of salicylate in beverages and cosmetics has been developed. The enzyme salicylate hydroxylase was immobilised covalently onto a glassy carbon working electrode of a wall-jet cell coupled with a flow-injection analysis system. The salicylate is enzymatically converted to catechol, which can be detected amperometrically on the glassy carbon electrode at +0.45 V. The response of the biosensor is linearly proportional to the concentration of salicylate between 725 nmol/l and 700 mol/l. A high sample throughput (60 h^-1) is possible, and the biosensor is stable for more than three months. Sample pretreatment for beverages and hair lotions is easy and fast. For creams, an extraction of salicylate is necessary. Relative standard deviations are less than 5.5% and the recoveries are between 95 and 105%.     

Extraction of nonferrous metals by bisacylated diethylenetriamine

Bisacylated diethylenetriamine (BAD) with an α,α′ branched substituent has been synthesized. Conditions for the extraction of copper(II), cobalt(II), nickel(II), zinc(II), and iron(III) chlorides from hydrochloric, chloride, and ammoniac solutions have been studied. The protonation constants of the extractant and the concentration constants of metal extraction have been calculated. The extraction in the pH range of 2–10 has a coordination mechanism; at hither acidities, the extraction occurs via ion exchange.     

Effect of sodium salicylate, sodium oxalate, and sodium chloride on the micellization and adsorption of sodium deoxycholate in aqueous solutions

The salicylate ion increases the rate of bile flow (choleretic effect) and bile salts are known to affect the colonic absorption of oxalate. Owing to this physiological relevance of salicylate and oxalate ions, critical micelle concentration (cmc) values of sodium deoxycholate (NaDC) were determined in aqueous sodium oxalate, sodium salicylate, and sodium chloride solutions by using surface tension, fluorescence, and EMF methods. The results indicate, besides a counterion effect, the influence of coanions on the cmc. In the range from 25 to 40 °C, cmc increases almost linearly with temperature. In the temperature range from 30 to 40 °C, the counterion binding constant β of NaDC micelles has the same value (0.17±0.01) in the presence of sodium chloride and sodium salicylate. On the other hand, in sodium oxalate solution β=0.05±0.02 when oxalate concentration is less than or equal to c* and β=0.48±0.04 above c*, where c*≈0.038 mol kg(-1). EMF measurements also supported this type of counterion binding to NaDC micelles in sodium oxalate solutions. In sodium oxalate solution, at c* a change in the shape of deoxycholate micelles is expected to take place. Salicylate, oxalate, and chloride coanions have a similar effect on the adsorption of NaDC. This study reveals that the choleretic effect of salicylate is not due to the influence of salicylate ions on the micellization of NaDC.     

Extraction of lead(II) and copper(II) from salicylate media by tributylphosphine oxide.

Tributylphosphine oxide (TBPO) is proposed as an extractant for the extraction of lead(II) and copper(II) from salicylate media. The optimum conditions were evaluated by varying the experimental parameters, such as the pH, sodium salicylate concentration, tributylphosphine oxide (TBPO) concentration, shaking period and various diluents. The probable extracted species, deduced from log-log plots were Pb(HSal)2.2TBPO and Cu(HSal)2.2TBPO. The extraction took place through a solvation mechanism. The method permits the binary separation of lead(II) and copper(II) from commonly associated elements as well as the mutual separation of lead(II) and copper(II). The method is applicable to the determination of lead(II) and copper(II) in various alloys as well as environmental and pharmaceutical samples.     

Extraction of zinc and cadmium thiocyanate complexes in the presence of pyridine and some metal ion separations

Extraction of zinc(II) and cadmium(II) from ammonium thiocyanate solutions has been studied in benzene in the presence of pyridine. The effect of such variables as the pH of aqueous phase and concentration of metal, thiocyanate and pyridine on extraction has been investigated and the extracting species identified. Extraction behaviour of silver(I), manganese(II), cobalt(II), mercury(II) and thallium(III) has also been studied under identical conditions and some binary metal ion separations of analytical and radiochemical importance are reported.     

Extractive separation of group IVB elements: analysis of alloy samples

A method is proposed for the extraction and mutual separation of quadrivalent titanium, zirconium and hafnium from hydrochloric acid using triphenylphosphine oxide dissolved in toluene as an extractant. The optimum conditions for the extraction and separation have been evaluated from critical study of acid concentration, extractant concentration, period of equilibration and effect of diluent. The effect of foreign ions on the extraction and determination is also discussed. The probable composition of the extracted species has been deduced from logD-logC plots. The method affords mutual separation of titanium, zirconium and hafnium and is applicable to the analysis of alloy samples.