Time-dependent ion selectivity in capacitive charging of porous electrodes

In a combined experimental and theoretical study, we show that capacitive charging of porous electrodes in multicomponent electrolytes may lead to the phenomenon of time-dependent ion selectivity of the electrical double layers (EDLs) in the electrodes. This effect is found in experiments on capacitive deionization of water containing NaCl/CaCl(2) mixtures, when the concentration of Na(+) ions in the water is five times the Ca(2+)-ion concentration. In this experiment, after applying a voltage difference between two porous carbon electrodes, first the majority monovalent Na(+) cations are preferentially adsorbed in the EDLs, and later, they are gradually replaced by the minority, divalent Ca(2+) cations. In a process where this ion adsorption step is followed by washing the electrode with freshwater under open-circuit conditions, and subsequent release of the ions while the cell is short-circuited, a product stream is obtained which is significantly enriched in divalent ions. Repeating this process three times by taking the product concentrations of one run as the feed concentrations for the next, a final increase in the Ca(2+)/Na(+)-ratio of a factor of 300 is achieved. The phenomenon of time-dependent ion selectivity of EDLs cannot be explained by linear response theory. Therefore, a nonlinear time-dependent analysis of capacitive charging is performed for both porous and flat electrodes. Both models attribute time-dependent ion selectivity to the interplay between the transport resistance for the ions in the aqueous solution outside the EDL, and the voltage-dependent ion adsorption capacity of the EDLs. Exact analytical expressions are presented for the excess ion adsorption in planar EDLs (Gouy-Chapman theory) for mixtures containing both monovalent and divalent cations.     

A Potentiometric Multisensor System of Anion-Selective Electrodes Based on Ionic Liquids

The possibility of using solid-state and liquid PVC-membrane electrodes based on ionic liquids to design a potentiometric multisensor system is assessed. Ionic liquids with 1,3-dihexadecylimidazolium cation and chloride, bromide, iodide, and nitrate anions are used. The sensitivity parameters of the sensors are determined. A multisensor array is applied to detect chloride and iodide anions in the multicomponent mixture. The designed system is used to discriminate between mineral waters of different compositions by applying the method of principal component analysis (PCA).     

Investigation of ion/molecule reactions as a quantification method for phosphorylated positional isomers. an FT-ICR approach

A rapid and accurate method of quantifying positional isomeric mixtures of phosphorylated hexose and N-acetylhexosamine monosacchrides by using gas-phase ion/molecule reactions coupled with FT-ICR mass spectrometry is described. Trimethyl borate, the reagent gas, reacts readily with the singly charged negative ions of phosphorylated monosaccharides to form two stable product ions corresponding to the loss of one or two neutral molecules of methanol from the original adduct. Product distribution in the ion/molecule reaction spectra differs significantly for isomers phosphorylated in either the 1- or the 6-position. As a result, the percents of total ion current of these product ions for a mixture of the two isomers vary with its composition. In order to determine the percentage of each isomer in an unknown mixture, a multicomponent quantification method is utilized in which the percents of total ion current of the two product ions for each pure monosaccharide phosphate and the mixture are used in a two-equation, two-unknown system. The applicability of this method is demonstrated by successfully quantifying mock mixtures of four different isomeric pairs: Glucose-1-phosphate and glucose-6-phosphate; mannose-1-phosphate and mannose-6-phosphate; galactose-1-phosphate and galactose-6-phosphate; N-acetylglucosamine-1-phosphate and N-acetylglucosamine-6-phosphate. The effects of mixture concentrations and ion/molecule reaction conditions on the quantification are also discussed. Our results demonstrate that this assay is a fast, sensitive, and robust method to quantify isomeric mixtures of phosphorylated monosaccharides.     

Retention in analytical ion exchange chromatography-1. Strong electrolytes on strong ion exchangers

A retention equation of general validity is adapted to ion exchange chromatography providing a self-consistent interpretation of retention of solutes and system peaks. Discussion is limited to eluent mixtures containing ions of invariant charge and to stationary phases with pH-independent surface charge. An interpretation is proposed for the retention volume of system peaks in binary eluents (mixtures of two eluent counter-ions). Retention volumes of labelled counter-ions of the eluent appear to provide useful information about the chromatographic system with clear interpretation in any multicomponent eluent.     

Sensor Analysis of Gases Emitted in Basic Organic Synthesis

A matrix comprised of eight different sensors based on piezoelectric-crystal resonators was used for analysis of multicomponent gas mixtures. The resonator electrodes were modified with both known and unconventional gas-chromatographic sorbents.     

Chromatography of inorganic ions on diethyl-(2-hydroxy-propyl)aminoethyl cellulose layers in hydrochloric acid and in HCl-ammonium chloride media

Summary Thin-layer chromatographic behavior of 49 inorganic ions has been systematically studied on diethyl-(2-hydroxy-propyl)aminoethyl (QAE)-cellulose, a strongly basic anion exchanger, in aqueous hydrochloric acid and in acid-ammonium chloride media (0.01 to 1.0 mol dm^–3). Aspects of the adsorption behavior of the ions on the cellulose are compared with those on other anion exchangers in the same eluent system. Feasibilities of separation of multicomponent mixtures are proposed on QAE-cellulose in both media. In particular, the selective separation of Re(VII) from many other ions can be accomplished on these systems.     

Utilization of MS3 spectra for the multicomponent quantification of diastereomeric N-acetylhexosamines

A rapid and accurate means of quantifying mixtures of diastereomeric N-acetylhexosamine monosaccharides using MS³ product ions is introduced. The method involves derivatizing the monosaccharides with [Co(DAP)₂Cl₂]Cl (where DAP is diaminopropane), and subjecting the derivatized products to collision-induced dissociation (CID) in a quadrupole ion trap mass spectrometer. Each diastereomer provides unique MS³ product ion abundances. The abundances for the pure monosaccharide standards are used in a system of equations in order to quantify mixtures of these diastereomers. Using the system of equations is quite advantageous, as it is the only mass spectrometric method that has been shown to successfully quantify mixtures of more than two isomers. The utility of the method is demonstrated by successfully quantifying various two and three component mixtures of the diastereomeric monosaccharides. Furthermore, the method is used to quantify the recovery of a single diastereomeric monosaccharide from an acidic resin. Although the multicomponent quantification method described herein is used to quantify mixtures of N-acetylhexosamine diastereomers, it could be applied to any group of isomers, provided distinguishing CID spectra are obtained. This is the first known report of utilizing MS³ product ions for quantification of structural isomeric mixtures.     

Thin-Layer chromatography of inorganic ions on cellulose phosphate in sulfuric acid-organic solvent media

Summary Thin-layer chromatographic behavior of 49 inorganic ions on cellulose phosphate (P-cellulose) has systematically been surveyed with binary solvent mixtures consisting of sulfuric acid and an organic solvent such as methanol or acetone. The R_f values of many bivalent and monovalent ions as well as Te(VI) decrease on the P-cellulose layer with an increasing concentration of the organic solvent. Polyvalent ions which form strong phosphato-complexes and precipitate insoluble sulfate are strongly retained on P-cellulose. Oxy-anions, Au(III) and Pt(IV) are not adsorbed on the cellulose to any great extent. Feasibilities of the separation of multicomponent mixtures are demonstrated on the P-cellulose layer.     

Utilization of MS spectra for the multicomponent quantification of diastereomeric N-acetylhexosamines

A rapid and accurate means of quantifying mixtures of diastereomeric N-acetylhexosamine monosaccharides using MS³ product ions is introduced. The method involves derivatizing the monosaccharides with [Co(DAP)₂Cl₂]Cl (where DAP is diaminopropane), and subjecting the derivatized products to collision-induced dissociation (CID) in a quadrupole ion trap mass spectrometer. Each diastereomer provides unique MS³ product ion abundances. The abundances for the pure monosaccharide standards are used in a system of equations in order to quantify mixtures of these diastereomers. Using the system of equations is quite advantageous, as it is the only mass spectrometric method that has been shown to successfully quantify mixtures of more than two isomers. The utility of the method is demonstrated by successfully quantifying various two and three component mixtures of the diastereomeric monosaccharides. Furthermore, the method is used to quantify the recovery of a single diastereomeric monosaccharide from an acidic resin. Although the multicomponent quantification method described herein is used to quantify mixtures of N-acetylhexosamine diastereomers, it could be applied to any group of isomers, provided distinguishing CID spectra are obtained. This is the first known report of utilizing MS³ product ions for quantification of structural isomeric mixtures.     

Voltammetric determination of vitamin E (α-Tocopherol acetate) in multicomponent vitaminized mixtures

The conditions are found for the voltammetric determination of fat-soluble vitamin E (α-tocopherol acetate) in nonaqueous media using carbon electrodes of different types. The electrochemical behavior of vitamin E is studied, and some parameters of the electrode reaction that are of analytical importance are estimated. The stage of sample preparation is optimized by the multifactorial design of experiments. Procedures for determining vitamin E in multicomponent vitaminized mixtures by differential voltammetry are developed and metrologically certified.     

主成分分析同时测定多组分金属离子

将主成分分析用于同时单点pH络合滴定,可同时测定多组分金属离子。讨论了方法原理、pH值的选择,建立了主成分分析常数矩阵。对四元金属离子混合样进行了多次测定,均获得满意结果。     

Metal ion capillary zone electrophoresis with direct UV detection: Comparison of different migration modes for negatively charged chelates

Summary Several migration modes suitable for capillary zone electrophoretic (CZE) separation of metal ions in the form of 8-hydroxyquinoline-5-sulphonic acid complexes are described and compared. Superior analysis time, resolution, efficiency and detectability were achieved using reversed movement of anionic metal complexes (in the anode-to-cathode direction) under the action of the electroosmotic flow. This method allows the CZE analysis of multicomponent mixtures of transition metal ions as well as aluminium within about six minutes.     

The use of chemisorption technologies in separation of multicomponent mixtures of metal ions

The concept of using hemisorption technologies for selective removal of individual ions from multicomponent mixtures was suggested and practically confirmed. Results obtained in experimental separation of the Ni²⁺-Fe³⁺-Pb²⁺ mixture with phosphate sorbents are reported.     

Case-based reasoning (CBR) for multicomponent analysis using sensor arrays: application to water quality evaluation

This paper reports by the first time the use of a simple, convenient and improved method of artificial intelligence (case-based reasoning, CBR) for multicomponent analysis, involving the data treatment afforded by electrochemical sensor arrays. The suitability of this method has been shown in aqueous solutions containing mixtures of ions of different nature and concentration, being applied in this case to a rapid recognition and evaluation of mineral water samples chosen as an illustrative example. The convenience of such a procedure opens the way to dispose of a versatile tool applicable for obtaining analytical information about ions present in a wide range of other multicomponent systems, and also to ascribe properties inherent to the examined samples.     

Modulation of drug transport properties by multicomponent diffusion in surfactant aqueous solutions

Diffusion coefficients of drug compounds are crucial parameters used for modeling transport processes. Interestingly, diffusion of a solute can be generated not only by its own concentration gradient but also by concentration gradients of other solutes. This phenomenon is known as multicomponent diffusion. A multicomponent diffusion study on drug-surfactant-water ternary mixtures is reported here. Specifically, high-precision Rayleigh interferometry was used to determine multicomponent diffusion coefficients for the hydrocortisone-tyloxapol-water system at 25 degrees C. For comparison, diffusion measurements by dynamic light scattering were also performed. In addition, drug solubility was measured as a function of tyloxapol concentration, and drug-surfactant thermodynamic interactions using the two-phase partitioning model were characterized. The diffusion results are in agreement with a proposed coupled multicomponent diffusion model for ternary mixtures relevant to nonionic drug and surfactant molecules. Theoretical examination of diffusion-based drug transport in the presence of concentration gradients of micelles shows that drug fluxes and drug concentration profiles are significantly affected by coupled multicomponent diffusion. This work provides guidance for the development of accurate models of diffusion-based controlled release in multicomponent systems and for the applications of micelle concentration gradients to the modulation of diffusion-based drug transport.     

Signal processing with a summing operational amplifier in multicomponent potentiometric titrations

It has been proved that application of two indicator electrodes connected to the ordinary titration apparatus through an auxiliary electronic device (a summing operational amplifier) significantly extends the scope of multicomponent potentiometric titrations in which the analytes are determined simultaneously from a single titration curve. For each analyte there is a corresponding potential jump on the titration curve. By application of the proposed auxiliary device, the sum of the electrode potentials is measured. The device also enables the relative sizes of the potential jumps at the end-points on the titration curve to be varied. The advantages of the proposed signal processing are exemplified by complexometric potentiometric titrations of Fe(III) and Cu(II) in mixtures, with a platinum electrode and a copper ion-selective electrode as the indicator electrodes.     

Probabilistic approach to evaluating the coefficient of separation of individual ions from multicomponent mixtures on nanofiltering membranes

A direct relationship between the separation coefficient and the mean probability for certain types of ions to pass through membranes was established. A probabilistic model of nanofiltration for the separation of multicomponent ionic mixtures was developed and verified experimentally. The key parameters and constants needed for probabilistic calculations of the membrane selectivity with respect to individual types of ions were calculated and interrelations between these quantities were established.     

Application of N-PLS calibration to the simultaneous determination of Cu(2+), Cd(2+) and Pb(2+) using peptide modified electrochemical sensors

The simultaneous determination of Cu(2+), Cd(2+) and Pb(2+) is demonstrated at four modified gold electrodes using N-PLS calibration. Three of the electrodes were modified with the peptides Gly-Gly-His, gamma-Glu-Cys Gly and human angiotensin I which were covalently attached to thioctic acid self-assembled monolayers and the fourth electrode was modified with thioctic acid only. Voltammetry at the modified electrodes in the presence of the three metal ions revealed one peak due to the reduction of copper and another due to the overlapping peaks of cadmium and lead which made quantification using conventional methods difficult. N-PLS was used to calibrate and predict trace concentrations (100 nM to 10 microM) of mixtures of Cu(2+), Cd(2+) and Pb(2+).     

An Empirical Approach for Estimating the Density of Multicomponent Aqueous Solutions Obeying the Linear Isopiestic Relation

An empirical approach is presented for the density of aqueous multicomponentsolutions conforming to the linear isopiestic relation. This approach can be usedto estimate the densities of multicomponent systems from data on the constituentbinary subsystems at the same water activity. Predicted and measured densitiesfor 22 mixtures have been compared, using the simple Young's rule, theisopycnotic mixing rule of Teng and Lenzi, and the present method. The present methodand Young's rule give the most accurate predictions for strong electrolyte mixtureswithout common ions and for the mixtures with strong ion complexes, respectively.There is no universal best method for the strong electrolyte mixtures with commonions. An extensive comparison has also been given between apparent molarvolume predictions by Young's rule and by the new method. The two rules arerelatively better for the strong electrolyte mixtures without common ions andmixtures containing the transition metal chlorides, respectively. However, neitheris universally better for mixtures of strong common-ion electrolytes.     

Stripping voltammetry of copper and lead using gold electrodes modified with self-assembled monolayers

One problem associated with using bare solid metal electrodes, such as gold and platinum, in stripping analysis to determine heavy metal ions such as lead and copper ions in dilute solutions is that underpotential deposition (UPD) gives multiple stripping peaks in the analysis of mixtures. These peaks are often overlapped and cannot be conveniently used for analytical purposes. Bifunctional alkylthiols, such as 3-mercaptopropionic acid, with an ionizable group on the other terminal end of the thiol can form self-assembled monolayers (SAMs) on the surface of the gold electrode. It is shown that such an SAM-modified gold electrode minimizes the UPD effects for the stripping analysis of lead and copper. The anodic peak potential shifts and the peak shape changes, indicating that the SAM changes the deposition and stripping steps of these heavy metal ions. Thus, the sensitivity levels for both single species and mixtures can be significantly improved for the conventional solid electrodes. The mechanism of the deposition reaction at the SAM-modified gold electrodes is discussed. Received: 29 May 1997 / Accepted: 24 June 1997