Indirect determination of thallium by differential-pulse polarography

The method is based on the separation of Tl(I) as Tl(2)HPMo(12)O(40), stripping of the molybdate, and measurement of the peak current in differential-pulse polarography of the molybdenum. The calibration graph is linear over the range 2-12 ppm of thallium. The relative standard deviation is 1.2% (7 replicates each containing 500 microg of thallium). The current due to reduction of the molybdenum is three times that for reduction of the equivalent amount of Tl(I) in the thallous phosphomolybdate precipitate, making the indirect approach more sensitive than direct polarographic determination of the Tl(I).     

Determination of elemental sulfur, mercaptan and disulfide in petroleum naphtha by differential-pulse polarography

Summary The polarographic behaviour of elemental sulfur, mercaptan and disulfide in 0.032 mol/l sulfuric acid-ethanolnaphtha is described. The peak potentials for elemental sulfur and mercaptan are about 200 mV apart, which allows simultaneous determination of these compounds. The calibration plot is linear up to 1 mg·1^–1 for elemental sulfur and it is a curve depending on molecular weight for mercaptan. The disulfide present a peak close to the peak of the mercaptans but with a lower sensitivity and therefore they do not interfere. The polarographic properties, diffusion, reversibility and electrocapillary curves are discussed.     

Determination of subnanomolar concentrations of tungsten (VI) by catalytic adsorption polarography

A new differential pulse polarographic method for the determination of W(VI) using a catalytic adsorption wave is described. W(VI) is first chelated by 7-iodo-8-hydroxyquinoline-5-sulfonic acid at pH 0.5. The complex ion formed is strongly adsorbed on the surface of a dropping mercury electrode. At a potential of –0.95 V versus the Ag/AgCl (3M KCl) reference electrode the adsorbed complex is reduced by the polarographic current and oxidized very fast by hydrated hydrogen ions providing the oxidized form of the complex ion for repeated redox cycles. As the redox process taking place in the electric double layer, the diffusion of the complex does not limit the polarographic current. Therefore, high currents occur, and consequently, a very high sensitivity is obtained. The practical detection limit (PDL) is 3.7 ng W/kg solution corresponding to 2 × 10^–11 M. The standard deviation of single values is 1.2 ng/kg at the concentration of 91 ng/kg lying in the middle of the linear part of the calibration curve. Because Mo (VI) gives a very similar catalytic adsorption wave, serious mutual interferences occur in the analysis of mixtures of both species. An effective separation of Mo(VI) was worked out. Using 1% (w/v) solution of trioctylphosphinoxide in kerosene, Mo(VI) can almost completely be extracted from 1.8M HCl with a threefold extraction resulting in a separation factor of 40000.     

Metal chelates in adsorption polarography I: Mo(VI) and derivatives of oxine

The formation of complexes between Mo(VI) and 8-hydroxy-quinoline (oxine) and four oxine derivatives were investigated by multiwavelength molecular absorption spectrometry, potentiometry, and polarography. The following pK_OH- and pK_NH- values of the ligands and logK ₂₁₁-values of the complexes MoO₂(OH)₂L ^x– (x=1 or 2) were obtained at 25° C and an ionic strength of 1M(NaClO₄): 5,7-dinitro8-hydroxyquinoline 4.59, <0, 14.50; 7-nitro-8-hydroxyquinoline-5-sulfonic acid 5.34, 0.41, 15.70; 7-iodo-8-hydroxyquinoline-5-sulfonic acid 6.98, 2.62, 17.65; 8-hydroxyquinoline-5-sulfonic acid 8.33, 4.13, 18.71; and 8-hydroxyquinoline 9.62, 5.28, 19.69. A good linearity was found between logK ₂₁₁ and the sum of the pK-values of the OH- and NH⁺-groups. The dependence of the peak current of Mo(VI)-determinations by adsorption polarography of the 7-nitro-8-hydroxyquinoline-5-sulfonate complex of Mo(VI) MoO(OH)₃L^– can quantitatively be described at pH 0.8–2 using the corresponding pK-values and the log K₃₁₁ of 18.54±0.03, determined by polarography.     

Indirect determination of traces of thiosulphate by differential-pulse polarography

Two methods are reported for the indirect determination of thiosulphate down to ca. 0.02 microg/ml by differential-pulse polarography. Both methods involve prior oxidation of thiosulphate with iodine, either in acidic medium to tetrathionate or in alkaline medium to sulphate, whereby ultimately one and eight equivalents of iodate are obtained, respectively. The concentration of iodate in the resulting solution is then measured by differential-pulse polarography under optimum conditions. The average recovery for each method amounted to 100.1%, and the relative standard deviations were 1.3 and 1.4% for the two methods.     

Kinetic Determination of Nanogram Amounts of Mo(VI) in Solution

A new inhibitory reaction is proposed and a kinteic method developed for the determination of ultra‐micro amounts of Mo(VI) on the basis of its inhibitory activity in oxidation of trimethylenediamine ‐N,N,N′,N′‐tetraacetic acid (TDTA) by KMnO₄ in the presence of hydrochloric acid. Under optimal conditions the sensitivity of the method is 0.5 ng/cm³. The probable relative error is 2.9–3.5% for the concentration range 7.5–2.0 ng/cm³ of Mo(VI). The effect of certain foreign ions upon the reaction rate were determined for the assessment of the selectivity of the method. The selectivity of the method is relatively good. Kinetic equations were proposed for the investigated process. A method has been applied for determination of Mo(VI) in a certain kind of steel.     

Cathode ray polarography and differential pulse polarography of the catalytic molybdenum(VI) wave

The optimum conditions of electrolyte composition and pH were studied for the cathode ray polarography (c.r.p.) of the catalytic molybdenum(VI) wave; 1–2 M potassium nitrate at pH 1.6–2.2 is optimum, the detection limit is 3 × 10^-9 M (0.3 ppb) molybdenum(VI). Equal molar concentrations of foreign electroactive substances do not interfere at the potential of the molybdenum wave and 500-fold amounts of these can be tolerated if their c.r.p. peaks are separated from the molybdenum wave by 0.1 or 0.2 V. Similar conditions were used for the differential pulse polarography of the catalytic wave. The detection limit is 2 × 10^-8 M (2 ppb). being limited in part by lead impurities which contribute to the background.     

钼-槲皮素的配位化学研究

用单扫描极谱法研究了钼(Mo)与槲皮素(Qu)形成配合物的最佳实验条件及反应机理。在pH4.0的HAc NaAc缓冲溶液中,槲皮素与Mo(Ⅵ)络合并在-0.98V(vs.SCE)处产生一个灵敏的还原峰,其峰高与Mo(Ⅵ)浓度在4.0×10-6～1.8×10-5mol L范围内呈现良好的线性关系,检出限为3.0×10-6mol L。测得配合物组成Mo(Ⅵ)∶Qu=1∶3,表观稳定常数为1.33×1014。     

Determination of Fe(III), Al(III), Mo(VI) and W(VI) with tetracycline by reversed-phase high-performance liquid chromatography

Tetracycline (TC) was used as a precolumn chelating reagent for reversed-phase high-performance liquid chromatographic (HPLC) separation and determination of Fe(III), Al(III), Mo(VI) and W(VI). The metal-TC chelates were separated on a Nucleosil C(18) (5 mum) column using a mobile phase of acetonitrile-water (21:79, v/v) containing citrate buffer and sodium chloride, nanogram levels of the metals could be determined by HPLC with satisfactory precision. The proposed method was applied to the simultaneous determination of Mo(VI) and W(VI) in mineral samples.     

Determination of methylviologen (Paraquat) by differential pulse polarography

Summary Determination of Methylviologen (Paraquat) by Differential Pulse Polarography The second reduction wave of methylviologen (Paraquat) has been studied at pH 2 by different polarographic techniques. The limiting current is diffusion-controlled. Evidence for dimerization of the radical formed in the first reduction step has been obtained. The n values for the reduction process have been calculated at concentration levels where the dimer and the monomer predominate. Paraquat can be determined by differential pulse polarography in the 6.0×10^–5–4.0×10^–7 M concentration range, the limit of determination being 1.7×10^–7 M. The method has been applied to paraquat determination in commercial herbicides.     

Determination of Mo(VI) with 2-benzylideneiminobenzohydroxamic acid (2-BIBH) in urine by cathodic stripping voltammetry

Summary Controlled adsorptive accumulation of Mo(VI)-2-BIBH at the hanging mercury drop electrode (HMDE) provides the basis for the direct stripping measurement of Mo(VI) in nanomolar concentration. The cathodic stripping response is evaluated with respect to experimental parameters such as preconcentration time, preconcentration potential and others. A differential pulse cathodic stripping voltammetric method for the determination of Mo(VI) with 2-BIBH in urine is proposed. The detection limit is 10^–9 mol/l Mo(VI), standard deviation for 5×10^–8 mol/l is ±1.58×10^–9 mol/l.

---

Bestimmung von MolybdÄn(VI) mit 2-BenzylideniminobenzohydroxamsÄure (2-BIBH) in Harn durch kathodische Stripping-Voltammetrie

     

The determination of chromium(VI) in natural waters by differential pulse polarography.

A method utilizing differential pulse polarography for the determination of chromium(VI) in natural water is described. Additions of 0.62 μg Cu(II) ml^-1 and 0.55 μg Fe(III) ml^-1 did not interfere with the determination of 0.050 μg Cr(VI) ml^-1. The natural water samples containing chromium(VI) were buffered to approximately pH 7 with 0.1 M ammonium acetate and 0.005 M ethylene diamine and analyzed. Natural water samples of chromium content from 0.035 μg ml^-1 to 2.0 μg ml^-1 may be analyzed directly without further preparation. The detection limit is 0.010 μg ml^-1.     

Determination of promethazine by anodic differential-pulse voltammetry

A differential-pulse voltammetric method is described for the determination of promethazine hydrochloride. The method is based on the anodic oxidation of promethazine on a glassy carbon electrode at + 0.64 V vs. SCE in Prideaux buffer of pH 2.3. The reversibility of the oxidation was tested by cyclic voltammetry; the electrode process is quasi-reversible. From the results of microcoulometric experiments and a study of acid—base equilibria, a mechanism for the electrochemical oxidation is presented. The method is applied to determine promethazine hydrochloride in pharmaceutical formulations. Calibrations are linear over the 0.1–1 and 1–5 mg/50 cm³ ranges.     

Simultaneous separation of copper, cadmium and cobalt from sea-water by co-flotation with octadecylamine and ferric hydroxide as collectors

A method is proposed for the simultaneous quantitative separation of traces ofCu(II), Cd(II) and Co(II) from sea-water samples by means of the co-flotation (adsorbing colloid flotation) technique with ferric hydroxide as co-precipitant and octadecylamine as collector. The experimental parameters have been studied and optimized. The drawbacks arising from the low solubility of octadecylamine and the corresponding sublates in water have been avoided by use of a 6M hydrochloric acid-MIBK-ethanol (1:2:2 v v ) mixture. The results obtained by means of the proposed method have been compared with those given by the usual ammonium pyrrolidine dithiocarbamate/MIBK extraction method.     

Determination of selenium(IV) and tellurium(IV) by differential pulse polarography

Differential pulse polarographic methods for the determination of selenium(IV) and tellurium(IV) in nitric acid medium are described. The peak current is maximal when 0.25M nitric acid medium is used, the DPP peaks for Se(IV) and Te(IV) being at -0.54 and -0.8 V vs. Ag/AgCl respectively. The peak current is a linear function of selenium concentration over three ranges, 5.1 x 10(-6)-1.3 x 10(-5), 1.27 x 10(-5)-1.27 x 10(-4) and 1.27 x 10(-4)-7.60 x 10(-4)M Se(IV), with different slopes. The plot for Te(IV) is linear over the range 0.78 x 10(-6)-9.40 x 10(-5)M.     

Liquid-liquid extraction of Mo(VI) and V(V) by Primene JMT

The extraction equilibrium of pentavalent vanadium and hexavalent molybdenum with a benzene solution of primary amine Primene JMT sulphate has been investigated. The comparison of the extraction of aqueous solutions containing the salts of the elements and the solutions containing the mixture of Mo(VI) and V(V) was carried out. The attention was directed to the pH 2–6 region in which the heptamolybdates and decavanadates in prevail aqueous phase and to the region ≈1M H₂SO₄ which was suitable for the extraction separation of Mo(VI). The mechanism of extraction is discussed.