Cesium ion selective electrode based on calix[4]crown ether-ester

The potentiometric response characteristics of cesium ion selective PVC membrane electrode employing calix[4]crown ether-ester as an ionophore were investigated. The electrode exhibit a good response for cesium ion over wide concentration range of 5.0x10(-6)-1.0x10(-1) M with a Nernstian slope of 59 mV per decade. The detection limit of electrode is 5.0x10(-6) M. The electrode was found to have selectivity for cesium ion over alkali, alkaline and transition metals. The response time of the electrode is less than 20 s and can be used for more than 4 months without observing any divergence in potentiometric response. The electrode response was stable over wide pH range.     

In vivo measurements with a potassium ion-selective microelectrode based on a new bis(crown ether)

Potassium ion-selective microelectrodes with a tip diameter of 10 μm are described. The ionophore used is 2,2′-bis[3,4-(15-crown-5)-2-nitrophenylcarbamoxymethyl] tetradecane in a conventional mixture with sodium tetraphenylborate, an ether and PVC. The electrode provides Nernstian response over the range 10^?5?10^?1 M potassium activity. Its selectivity is shown to be similar to that of a valinomycin-based microelectrode. After the electrode has aged for 24 h, the 95% response time at the 10^?3 M potassium ion level is 2.0 ± 0.5 s. The applicability of the bis(crown ether) electrode for measurements in vivo is proved by monitoring the changes in potassium activity in different areas of the brain of anaesthetized rats after administration of veratrine.     

Studies with an inorganic ion-exchange membrane exhibiting selectivity for Pb(II) ions

A solid membrane electrode made with titanium arsenate as membrane material and "Araldite" as binder has been used to measure the activity of lead in the concentration range from 0.1 M to 5 x 10(-6)M. The electrode is unaffected by many cations, nitrate and acetate. The response time is 40-60 sec over the whole concentration range (in a static system) and the electrode has a working life of at least four months. The electrode can work in the pH range 2-5 and is tolerant of ethanol up to a content of 30% v v . It has been successfully used for end-point indication in potentiometric titration of lead. A membrane treated with cationic surfactant exhibits better selectivity.     

Cesium-ion selective electrodes based on calix[4]arene dibenzocrown ethers

Four calix[4]arene dibenzocrown ether compounds have been prepared and evaluated as Cs(+)-selective ligands in solvent polymeric membrane electrodes. The ionophores include 25,27-bis(1-propyloxy)calix[4]arene dibenzocrown-6 1, 25,27-bis(1-alkyloxy)calix[4]arene dibenzocrown-7s 2 and 3, and 25,27-bis(1-propyloxy)calix[4]arene dibenzocrown-8 4. For an ion-selective electrode (ISE) based on 1, the linear response concentration range is 1x10(-1) to 1x10(-6) M of Cs(+). Potentiometric selectivities of ISEs based on 1-4 for Cs(+) over other alkali metal cations, alkaline earth metal cations, and NH(4)(+) have been assessed. For 1-ISE, a remarkably high Cs(+)/Na(+) selectivity was observed, the selectivity coefficient (K(Cs,Na)(Pot)) being ca. 10(-5). As the size of crown ether ring is enlarged from crown-6 (1) to crown-7 (2 and 3) to crown-8 (4), the Cs(+) selectivity over other alkali metal cations, such as Na(+) and K(+), is reduced successively. Effects of membrane composition and pH in the aqueous solution upon the electrode properties are also discussed.     

Potentiometric determination of trace silver based on the use of a carbon paste electrode

A carbon paste electrode used as a sensor for silver has been developed and electrode response characteristics have been investigated. The electrode exhibits linear response to the logarithm of the concentration of silver from 5 x 10(-7)M to 1 x 10(-2)M, with a response slope of 63 +/- 2 mV. The detection limit according to IUPAC recommendations is 1 x 10(-7)M. This electrode has been used to determine trace silver in fixing solutions and waste electroplate solutions with good results.     

A tripodal [2]rotaxane on the surface of gold

Tripodal [2]rotaxane, 3, and the structurally related axle, 2, incorporating a viologen moiety, a crown ether, and three thiol anchoring groups have been synthesized. Analogous monopodal derivatives, 1, have also been prepared. Self-assembled monolayers of the above tripodal and monopodal systems on gold have been studied by cyclic voltammetry. It has been shown that a thiol anchoring group is required to attach the monopodal viologen 1 to the surface of gold and that the maximum surface coverage of 1 corresponds to 2.7 x 10(-10) mol.cm(-2). The adsorbed monopodal viologen 1 does not thread bis-p-phenylene-34-crown-10 ether, 6. However, the tripodal axle 2 adsorbed on the surface of gold threads the crown ether 6 to form a hetero [2]rotaxane. In the case of the tripodal axle 2, the surface coverage is 7 x 10(-11) mol.cm(-2), while for the tripodal [2]rotaxane 3 the surface coverage reaches 1.1 x 10(-10) mol.cm(-2).     

A 15-crown-5-functionalized carbosilane dendrimer as ionophore for ammonium selective electrodes

The synthesis of CH(2)CHCH(2)OCH(2)[15-crown-5] (III) is achieved by the treatment of HOCH(2)- [15-crown-5] (I) with equimolar amounts of CH(2)CHCH(2)Br (II) in the presence of KOH. The hydrosilylation of III with Si(CH(2)CH(2)CH(2)SiMe(2)H)(4) (IV) in the presence of the Karstedt catalyst affords the crown ether end-capped carbosilane dendrimer Si(CH(2)CH(2)CH(2)Si-Me(2)CH(2)CH(2)CH(2)OCH(2)[15-crown-5])(4) (V). PVC-based membranes of V as ionophore with sodium tetraphenyl borate (NaTPB) as anion excluder and dioctyl phthalate (DOP), diphenyl ether (DPE), dibutyl amine (DBA) and dibutyl phthalate (DBP) as plasticizing solvent mediators were prepared and investigated as NH(4)(+)-selective electrode. The response of the electrode was linear with a Nernstian slope of 53.3mV/decade over an NH(4)(+) ion concentration range of 7.60x10(-6) to 1.0x10(-1)M and a detection limit of 3.9x10(-6)M. The response time to achieve a steady potential for NH(4)(+) ions was between 6 and 10s, and the electrode is suitable for use within the pH range of 2.2-8.5. The selectivity relative to alkali, alkaline earth, and transition heavy metal ions is good. The newly developed ionophore showed higher NH(4)(+) selectivity over K(+) ( [Formula: see text] ) and Na(+) ( [Formula: see text] ). The electrode could be used for at least 45 days without considerable alteration in its potential. The electrode also shows a better working concentration range and slope in comparison to other NH(4)(+)-selective electrodes reported in literature.     

Lead Ion‐Selective Polypyrrole Solid‐Contact Electrode Based on Crown Ether

Abstract

The lead(II) ion selective solid‐contact electrode based on polypyrrole film, covered with a polyvinyl chloride membrane has been prepared. Polypyrrole film was used as a mediating layer of the solid‐contact electrode due to the conductivity. Crown ether has been used as ionophores in polyvinyl chloride cocktail solutions. This solid‐contact electrode based on benzo‐15‐crown‐5 exhibited Nernstian‐response within 30 s response time over concentration range, 1×10^?1～5×10^?7 M. The selectivity of this electrode to other metal cations was comparatively good. This electrode showed much better results, such as detection range, slope, response time and reproducibility than conventional ion selective electrode and coated wire electrode.     

Differential pulse anodic stripping voltammetric determination of lead(II) with a 1,4-bis(prop-2'-enyloxy)-9,10-anthraquinone modified carbon paste electrode

A sensitive and selective method for the determination of lead(II) with a 1,4-bis(prop-2'-enyloxy)-9,10-anthraquinone (AQ) modified carbon paste electrode has been developed. The method is based on non-electrolytic preconcentration via complex formation with modifier, followed by an accumulation period with a negative potential (-1.5 V), and then by a proper anodic stripping. The analytical performance was evaluated with respect to the quantity of modifier in the paste, concentration of electrolyte solution, preconcentration time, lead(II) concentration, and other variables. A linear calibration graph was obtained in the concentration range 2.00x10(-9)-1.06x10(-5) M Pb(II) (n=21, r=0.9999) with 30 s preconcentration time. The detection limit was found to be 1x10(-9) M. For eight preconcentration/determination cycles, the differential pulse voltammetric response was reproduced with 5.0 and 3.7% relative standard deviations at 2.00x10(-8) and 2.00x10(-6) M Pb(II), respectively. Rapid and convenient renewal of electrode surface allows the use of a single modified electrode surface in multiple analytical determinations over several weeks. Many coexisting metal ions had little or no effect on the determination of lead(II). The developed method was applied to lead determination in waste waters.     

Lead(II)-selective electrode based on phenyl disulfide.

A PVC membrane electrode for lead ions based on phenyl disulfide as the membrane carrier was developed. The electrode exhibits a good Nernstian slope of 29.3 +/- 0.7 mV/decade and a linear range of 2.0 x 10(-6)-1.0 x 10(-2) M for Pb(NO3)2. The limit of detection is 1.2 x 10(-6) M. It has a response time of 45 s and can be used for at least fifty days without any divergence in potential. The proposed membrane sensor revealed high selectivity for Pb2+ over a wide variety of other metal ions and could be used in the pH range of 3.5-6.3. The electrode was used as an indicator electrode in potentiometric titration of lead ions.     

Cationic Surfactant Ion-Selective PVC Membrane Electrode Containing Macrocyclic Diimine Crown Ether

ABSTRACT

DP⁺ ion-selective PVC membrane electrode based on 2,3,11,12-dibenzo-5,9-diaza-4,9(10)-cis-diimino-1,13-dioxacyclopentadecane as a novel macrocyclic diimine crown ether is proposed. o-Nitrophenyl octyl ether as plasticizer and potassium tetrakis(4-chlorophenyl)borate as lipophilic salt were used. The electrode exhibits a Nernstian response for 1.0 x 10^?2-1.0 x 10^?6 mol 1^?1 DPCl with a slope of 58 mVdecade^?1. The detection limit is 2.5 x 10^?7 mol 1^?1. The electrode response was stable over a wide pH range (3-11). The lifetime of the electrode was about 2 months. The electrode shows a high selectivity towards inorganic cations. Among the organic cations tested, only hexadecyltrimethylammonium ion interferes. The electrode was suitable for determining the critical micelle concentration and as an end-point detector in the potentiometric titration of the cationic surfactants.     

Electroanalytical study of sulphamerazine at a glassy-carbon electrode and its determination in pharmaceutical preparations by HPLC with amperometric detection

An electroanalytical study of the oxidation of sulphamerazine at a glassy-carbon electrode has been made by use of different voltammetric techniques. The limiting current is diffusion-controlled, at pH 7.0, for sulphamerazine in the concentration range 2.0 x 10(-5)-1.0 x 10(-4)M. The limits of determination found for differential pulse voltammetry at a stationary electrode and at a rotating electrode were 5.9 x 10(-6) and 3.3 x 10(-6)M respectively. A reversed-phase HPLC method with amperometric detection for the analysis of sulphamerazine, sulphadiazine and phthalylsulphathiazole mixtures has been developed, and applied to a commercial pharmaceutical preparation.     

Bis(2-hydroxyacetophenone)ethylenediimine as a neutral carrier in a coated-wire membrane electrode for lead(II).

A coated-wire ion-selective electrode (CWISE), based on a Schiff base as a neutral carrier, was successfully developed for the detection of Pb(II) in aqueous solution. CWISE exhibited a linear response with a Nernstian slope of 29.4 +/- 0.5 mV/decade within the concentration range of 1.0 x 10(-5) - 1.0 x 10(-1) M lead ion. CWISE has shown detection limits of 5.0 x 10(-6) M. The electrode exhibited good selectivity over a number of alkali, alkaline earth, transition and heavy metal ions. This sensor yielded a steady potential within 10 to 20 s at a linear dynamic range. The electrode was suitable for use in aqueous solutions in a pH range of 2.0 to 5.0. Applications of this electrode for the determination of lead in real samples and as indicator electrode for potentiometric titration of Pb2+ ion using K2CrO4 are reported.     

Triethylene glycol ether end-grafted carbosilane dendrimer: a potential ionophore for potassium ion recognition.

The performance of a newly synthesized carbosilane dendrimer bearing four triethylene glycol ether (TEG) units, Si(CH2CH2CH2Si(Me)2CH2CH2CH2(OCH2CH2)3Me)4 (1), as ionophores in ion-selective electrodes has been investigated. Optimization of the plasticized polyvinyl chloride membrane composition has produced electrodes that exhibit a Nernstian response for potassium ions. The best general characteristics exhibited by the electrodes were found when the membrane composition ratio of DPE:1:NaTPB:PVC 60:3:2:35 (wt%) was used. The response of the electrode was linear with a Nernstian slope of 58.3 mV/decade over the K+ ion concentration range of 1.9x10(-7) to 1.0x10(-1) M with a detection limit of 3.1x10(-7) M. The response time to achieve a 95% steady potential for the K+ concentration ranging from 1.0x10(-1) to 1.0x10(-8) M was less than 10 s, and it was found that the electrode is suitable for use within a pH range of 5.5-8.5. The selectivity coefficients (log KPotK+,Mn+)), which were determined by the fixed interference method, showed good selectivity for K+ against most of the interfering cations. The influence of this selective ion-binding behavior using electrospray ionization time-of-flight (ESI-TOF) mass spectrometric studies is discussed.     

Differential pulse anodic stripping voltammetry of lead (lI) benzoylacetonate in chloroform: Application to the analysis of free-lead gasoline and gas oil samples

The voltammetric characteristics of lead(II) benzoylacetonate in chloroform at the mercury electrode are investigated. The conditions for nearly reversible reduction of lead(II) were optimized. Anodic stripping voltammetry for the determination of trace-lead was developed using differential pulse technique to strip amalgamed lead from hanging mercury drop electrode. The experimental conditions, such as scanning rate of electrode potential and deposition time of lead were optimized. The calibration graph was linear over concentration range 5x10(-8)-10(-6) M of lead(II). The detection limit was 2.5x10(-9) and the relative standard deviation for the determination of 4x10(-7) M Pb(II) was 2%. Preceded by decomposition of organolead compounds with concentrated nitric acid, then ashing at 300 degrees C and a solvent extraction of Pb(II) benzoylacetonate in chloroform, the suitability of the proposed method for the determination of lead in free-lead gasoline and gas oil was demonstrated as a typical example of application.     

A new fluorescent calix crown ether: synthesis and complex formation with alkali metal ions

We synthesised a new N-benzylaza-21-crown-7 ether 5 with a dihydroxy coumarin as a fluorescence sensor and investigated the binding behaviour towards alkali metal cations in methanol by fluorescence titrations. The association constants are within one order of magnitude, with the exception of sodium. Potassium is the preferred binding partner (K(Na)=330 M(-1); K(K)=8600 M(-1); K(Rb)=8200 M(-1); K(Cs)=4400 M(-1)). The corresponding aza-21-crown-7 ether (6) was attached by a methylene unit to a resorcarene to give fluorescent calix crown ether 12. The binding abilities of the calix crown ether towards alkali metal ions in methanol have also been investigated, and an increasing complex stability, distinct for potassium and rubidium in comparison with 5, was found: K(Na)=440 M(-1); K(K)=110,000 M(-1); K(Rb)=63,000 M(-1); K(Cs)=20,000 M(-1). Like bis(crown ether)s, a cooperative complexation of the crown ether and the cavitand scaffold can be assumed. The proposed complex geometry is supported by Kohn-Sham DFT calculations for the potassium and caesium complexes.     

A PVC-coated carbon rod ion-selective electrode for thallium and its application to the analysis of rocks and minerals

A new Tl(III) ion-selective electrode prepared by coating a graphite rod with a PVC membrane has been made and investigated. The optimum membrane composition is Butylrhodamine B-TlCl(-)(4) 5 mg, chlorobenzene 0.1 ml, dioctyl phthalate 0.4 ml, PVC 0.17 g. The electrode exhibits Nernstian response to Tl(III) over the concentration range 6.5 x 10(-7)-2.5 x 10(-3)M. The detection limit is 3.5 x 10(-7)M and the slope of the electrode response is 53 +/- 1 mV per decade. The electrode shows high stability and selectivity. The electrode is easy to make and store, and inexpensive.     

Phosphoryl Containing Podands as Carriers in Plasticized Membrane Electrodes Selective to Quaternary Ammonium Surfactants

Open chain polyethers with phosphoryl-containing terminal groups have been studied as carriers in plasticized membrane electrodes that are selective towards cationic surfactants. Host–guest complexation has also been studied by means of batch extraction and bulk membrane transport experiments. For the various guests, the bulk membrane (chloroform) transport rate decreases in the series tetraalkyl ammonium > alkyl pyridinium > alkyl ammonium, while the series of solvent extraction efficiency is exactly opposite; an explanation for this behaviour is proposed. The performance of electrode membranes follows the series for bulk membrane transport. Among the ISE membranes of various composition, one containing the longest (seven oxygen atoms) podand, o-nitrophenyl octyl ether (plasticizer), and sodium tetraphenyl borate (anionic additive) performs the best. The slope of the electrode function equals 58.5 mV/decade, the detection limit for dodecyltrimethylammonium is 3.2 × 10^-6 M. ISE response time is 5–10 s, the working pH range is 2–11 and lifetime is at least 6 months. The electrode selectivity is significantly better than that of conventional ion-association and crown ether based electrodes.     

Chemically modified carbon paste electrode for iodide determination on the basis of cetyltrimethylammonium iodide ion-pair.

A new carbon paste electrode (CPE) for the determination of iodide ion based on a cetyltrimethylammonium iodide (CTMAI) ion pair as an electroactive material is described. The electrode shows a linear response for iodide ion over the concentration range of 4 x 10(-5) M to 1 x 10(-1) M with a lower detection limit of 4 x 10(-5) M at 25 degrees C. The electrode has a Nemstian slope of -55.0 +/- 0.4 mV/decade and a fast potential response of 45 s, which is almost constant over a pH range of 5.0 - 9.0. Selectivity coefficient data of the CTMAI-CPE for some common ions show negligible interference, and the electrode has high selectivity towards the iodide ion. An average recovery of 101.83% with a relative standard deviation of 1.53% has been achieved for the determination of iodide in Flaxedil (gallamine triethiodide) ampoules, a muscle relaxant drug. The electrode has been examined for the determination of iodide in saline water; the results were found to compare favorably with those obtained using Metrohm iodide ISE. The electrode has been utilized as an end-point indicator electrode for the determination of Hg(II) and phenylmercury(I) in their aqueous solutions using potentiometric titration with a potassium iodide standard solution.     

Mercury(II) ion-selective electrodes based on p-tert-butyl calix[4]crowns with imine units.

A PVC membrane incorporating p-tert-butyl calix[4]crown with imine units as an ionophore was prepared and used in an ion-selective electrode for the determination of mercury(II) ions. An electrode based on this ionophore showed a good potentiometric response for mercury(II) ions over a wide concentration range of 5.0 x 10(-5) - 1.0 x 10(-1) M with a near-Nernstian slope of 27.3 mV per decade. The detection limit of the electrode was 2.24 x 10(-5) M and the electrode worked well in the pH range of 1.3 - 4.0. The electrode showed a short response time of less than 20 s. The electrode also showed better selectivity for mercury(II) ions over many of the alkali (Na+, -1.69; K+, -1.54), alkaline-earth (Ca2+, -3.30; Ba2+, -3.32), and heavy metal ions (Co2+, -3.67; Ni2+, -3.43; Pb2+, -3.31; Fe3+, -1.82). Ag+ ion was found to be the strongest interfering ion. Also, sharp end points were obtained when the sensor was used as an indicator electrode for the potentiometric titration of mercury(II) ions with iodide and dichromate ions.