Mixed-ligand complexes of alkaline-earth metal trifluoroacetates with monoethanolamine

The mixed-ligand complexes of the formula [M(CF₃COO)₂(MEA) _n ] (MEA is monoethanolamine; M = Ca (I) and Sr (II), n = 1.5; M = Ba (III), (n = 1) were obtained from appropriate salts M(CF₃COO)₂ · nH₂O and MEA in ethanol. Complexes I–III were characterized by elemental analysis data and IR spectra. Slow crystallization of a solution of complex III in air gave a single crystal of the formula [Ba(CF₃COO)₂(MEA)(H₂O)], which is a coordination polymer with C.N.(Ba) 9 (X-ray diffraction data). Thermal analysis showed that complexes I–III decompose under argon and in air to the corresponding fluorides at T < 400°C.     

Rigid ferrocenophane and its metal complexes with transition and alkaline-earth metal ions

The rigid [6]ferrocenophane, L¹, was synthesised by condensation of 1,1′-ferrocene dicarbaldehyde with trans-1,2-diaminocyclohexane in high dilution at r.t. followed by reduction. When other experimental conditions were employed, the [6,6,6]ferrocenephane (L²) was also obtained. Both compounds were characterised by single crystal X-ray crystallography. The protonation of L¹ and its metal complexation were evaluated by the effect on the electron-transfer process of the ferrocene (fc) unit of L¹ using cyclic voltammetry (CV) and square wave voltammetry (SWV) in anhydrous CH₃CN solution and in 0.1 M ⁿBu₄NPF₆ as the supporting electrolyte. The electrochemical process of L¹ between −300 and 900 mV is complicated by amine oxidation. On the other hand, an anodic shift from the fc/fc⁺ wave of L¹ of 249, 225, 81 and 61 mV was observed by formation of Zn²⁺, Ni²⁺, Pd²⁺ and Cu²⁺ complexes, respectively. Whereas Mg²⁺ and Ca²⁺ only have with L¹ weak interactions and they promote the acid-base equilibrium of L¹. This reveals that L¹ is an interesting molecular redox sensor for detection of Zn²⁺ and Ni²⁺, although the kinetics of the Zn²⁺ complex formation is much faster than that of the Ni²⁺ one. The X-ray crystal structure of [PdL¹Cl₂] was determined and showed a square–planar environment with Pd(II) and Fe(II) centres separated by 3.781(1) Å. The experimental anodic shifts were elucidated by DFT calculations on the [ML¹Cl₂] series and they are related to the nature of the HOMO of these complexes and a four-electron, two-orbital interaction.     

Gas-phase formation of large neutral alkaline-earth metal tryptophan complexes

We report on the first observation of isolated large neutral metal amino acid complexes such as Trp(n)Me(k), with Me=Ca, Ba, Sr, cluster combinations covering n=1...33, k=0..2 and masses beyond 6500 u. The cluster beam is generated using UV laser desorption from a mixed powder of alkaline-earth metal salts and tryptophan inside a cluster mixing channel. The particles are detected using VUV photoionization followed by time-of-flight mass spectroscopy. The enhanced stability of metal amino acid clusters over pure amino acid clusters is substantiated in molecular dynamics simulations by determining the gain in binding energy related to the inclusion of the metal atoms.     

Formation constants of alkaline-earth metal complexes with xylenol orange and methylthymol blue

The complexes of the alkaline-earth metals with Xylenol Orange and Methythymol Blue have been studied. Three 1:1 and two 2:1 (metal:ligand) complex species for each indicator and each element have been found to be formed in aqueous solutions, and the formation constants and the arrangements of these complexes have been determined.     

Formation constants of alkaline-earth metal complexes with semi-xylenol orange and semi-methylthymol blue

Potentiometric and spectrophotometric studies on the interactions of Semi-Xylenol Orange and Semi-Methylthymol Blue and alkaline-earth metal ions are reported. Two complex species, MHL(-) and ML(2-), for each indicator and element have been found to be formed in aqueous solutions, and the formation constants and the arrangements of these complexes have been determined.     

The temperature dependence of saturated vapor pressure over alkaline-earth metal pivaloyltrifluoroacetonate complexes

The temperature dependences of saturated vapor pressure over M(PTA)₂ · 15-crown-5, where M = Ca, Sr, or Ba and PTA is the pivaloyltrifluoroacetonate anion, were studied by the Knudsen effusion method, and the enthalpies of compound sublimation were calculated. Changes in volatility depending on the central metal atom were determined.     

Synthesis,characterization and crystal structures of two alkaline-earth metal complexes of olsalazine

Two one-dimensional linear coordination polymers, [Mg(L)?·?4(H₂O)] (H₂L?=?olsalazine) and 2 [Ca(L)?·?4(H₂O)] were obtained from self-assembly of CaCl₂ or MgSO₄ with olsalazine and their structures determined by single crystal X-ray diffraction. Both complexes are one-dimensional polymers, for complex 1 with crystal data: P2(1)/c, a?=?9.5224(18), b?=?11.309(2), c?=?16.211(3)?Å, β?=?106.648(3)°, V?=?1672.6(6)?ų, Z?=?4, R ₁?=?0.0695, wR ₂?=?0.2183, for complex 2 with crystal data: P4(3)2(1)2, a?=?10.4006(2), b?=?10.4006(2), c?=?32.0746(10)?Å, V?=?3469.59(14)?ų, Z?=?8, R ₁?=?0.0332, wR ₂?=?0.1015. In the complexes, Mg and Ca adopt totally different coordination modes. Alkaline-earth Mg is six-coordinate octahedronal geometry, however, in 2, the local coordination geometry around calcium atom can be best described as a slightly distorted pentagonal bipyramid crystallizing in a homo-chiral space group. Olsalazine in both compounds also adopts dissimilar coordination modes.     

Determination of stability constants for alkaline-earth and alkali metal ion complexes of glycine by spectrophotometry

The complex equilibria between alkaline-earth and alkali metal ions with glycine were studied by a spectrophotometric method. The following stability constant (concentration) values valid at 25 degrees and ionic strength 1.0M were found: K(HL) = 10(9.57), K(LiL) = 10(-1.2), K(BaL) = 10(-0.40), K(SrL) = 10(0.14), K(CaL) = 10(0.55), K(MgL) = 10(1.17).     

Hydroamination of 2-vinylpyridine,styrene, and isoprene with pyrrolidine catalyzed by alkali and alkaline-earth metal complexes

The complexes (dpp-bian)Mg(thf)₃, (dpp-bian)Ca(thf)₄ and (dpp-bian)Mg(pyr)₃ (dpp-bian is the 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene dianion; pyr is the pyrrolidine) catalyze the addition of pyrrolidine to 2-vinylpyridine at room temperature. The compound (dppbian)Mg[N(SiMe₃)₂] containing a dpp-bian radical anion catalyzes the addition of pyrrolidine to styrene at 60 °C. The dpp-bian radical anion lithium-sodium salt [(dpp-bian)Li{N-(SiMe₃)₂}][Na(C₇H₈)] is an active catalyst of the addition of pyrrolidine to styrene and isoprene at 60 °C. In all the case, the content of the catalyst was from 1 to 2 mol.%. For styrene and 2-vinylpyridine, the reactions proceeded with the formation of anti-Markovnikov addition product, while 1,4-addition product was obtained in the case of isoprene.     

Photoinduced recoordination in the complexes of bis-aza-18-crown-6-containing dibenzylidenecyclobutanone with alkali and alkaline-earth metal cations

Complexation with strong competitors (i.e., Ba²⁺, Ca²⁺, and K⁺) shortens the length of the chromophore in bis-aza-18-crown-6-containing dienones of 2,4-dibenzylenecyclo-butanone series due to the weakening of π–LP conjugation as well as disruption of the quinonoid structure in the ground state of the dye (LP is the lone electron pair of the crown nitrogen atom). In the excited state, recoordination of metal cations in the crown cavity takes place. The complexation as well as the newly discovered photorecoordination in these metal complexes may be used to control the chromophore properties of the samples.     

Simultaneous determination of copper, bismuth and lead by adsorptive stripping voltammetry in the presence of thymolphthalexone.

A novel, sensitive and selective adsorptive stripping procedure for simultaneous determination of copper, bismuth and lead is presented. The method is based on the adsorptive accumulation of thymolphthalexone (TPN) complexes of these elements onto a hanging mercury drop electrode, followed by reduction of adsorbed species by voltammetric scan using differential pulse modulation. The influences of control variables on the sensitivity of the proposed method for the simultaneous determination of copper, lead and bismuth were studied using the Derringer desirability function. The optimum analytical conditions were found to be TPN concentration of 4.0 microM, pH of 9.0, and accumulation potential at -800 mV vs. Ag/AgCl with an accumulation time of 80 s. The peak currents are proportional to the concentration of copper, bismuth and lead over the 0.4-300, 1-200 and 1-100 ng mL(-1) ranges with detection limits of 0.4, 0.8 and 0.7 ng mL(-1), respectively. The procedure was applied to the simultaneous determination of copper, bismuth and lead in the tap water and some synthetic samples with satisfactory results.     

Dissociation constants of thymolphthalexone

For the dissociation constants of thymolphthalexone the following values have been found: pK(3) = 7.03 +/- 0.02, pK(4) = 8.05 +/- 0.09 (by potentiometric titration), pK(5) = 10.83 +/- 0.10, pK(6) = 12.99 +/- 0.11 (by spectrophotometry). They were determined at I = 0.4 and at 25 degrees.     

Electron capture dissociation of peptides metalated with alkaline-earth metal ions

The possible use of divalent alkaline-earth metal ions, including Mg2+, Ca2+, Sr2+, and Ba2+, as charge carrier for electron capture dissociation of peptides was investigated. Model peptides of RGGGVGGGR and NGGGWGGGN were used to simplify the interpretation of spectral information. It was demonstrated that useful electron capture dissociation (ECD) tandem mass spectra of these metalated peptides could be generated. Interestingly, peptides metalated with different alkaline-earth metal ions generated very similar ECD tandem mass spectra. Metalated c-ions and z-ions were the predominant fragment ions. Only Mg2+-metalated peptides gave somewhat different results. Some nonmetalated c-ions were observed from ECD of [RGGGVGGGR + Mg]2+ but not from [NGGGWGGGN + Mg]2+. Together with some ab initio calculations, it was established that the bound metal ions might activate the acidity of the amide hydrogen. With the presence of high proton affinity moiety, such as N-terminal amino group and/or side chain of the arginine residues, the metalated peptide ions could exist predominantly in their zwitterion forms, in which one or two backbone amide group(s) was deprotonated and the high proton affinity functional group(s) was protonated. It was believed that electron capture leads primarily to the reduction of the mobile proton rather than the metal ions. With this zwitterion model, the formation of nonmetalated c-fragments and the generation of similar ECD spectra for peptides metalated with various alkaline-earth metal ions could readily to be explained. Another interesting observation in the ECD mass spectra of metalated peptides is related to the enhanced formation of the minor ECD products, i.e., (c - 1)(+*) and (z + 1)+ ions. Together with ab initio calculations using a truncated peptide model, various possible reaction mechanisms for the formation of these minor ECD products were evaluated. It was concluded that hydrogen transfer between the initiated formed c and z(.) species plays an important role in the formation (c - 1)(+*) and (z + 1)+ ions. Although peptides metalated with these metal ions do not have better ECD efficiency compared to the multiply-protonated peptides, it provides practical accessibility of ECD methods to analyze small peptides with no basic amino acid residues.     

Stripping voltammetric determination of traces of catechol compounds preceded by adsorptive accumulation of metal complexes

Catechol compounds are quantified by controlled adsorptive accumulation of their metal complexes onto a hanging mercury drop electrode followed by stripping voltammetry. By using tin(IV) as a redox marker for quantifying the surface-bound species, selectivity can be improved relative to conventional oxidative methods; dopamine can be quantified in the presence of ascorbic acid. The method allows measurements of micromolar levels of catechol, dopamine, l-dopa, 3,4-dihydroxyphenylacetic acid and caffeic acid. The adsorptive stripping response is evaluated with respect to preconcentration time and potential, tin(IV) and analyte concentrations, stripping mode, reproducibility and possible interferences. Analogously, solochrome violet RS and dimethylglyoxime can be quantified after accumulation of their iron(III) and nickel(II) complexes, respectively. Detection limits are 7×10^?9 M for solochrome violet RS and 5×10^?8 M for caffeic acid (1- and 5-min preconcentration, respectively).     

Stability constants and thermodynamic data for complexes of 12-crown-4 with alkali metal and alkaline-earth cations in methanol solutions

The formation of 1:1- and 2:1-complexes of the crown ether 12C4 with mono- and bivalent cations was studied in methanol solutions by calorimetric, potentiometric and conductometric titrations. It is shown that not all donor atoms of the ligand 12C4 take part in complex formation. The accuracy of the three experimental methods are checked by comparing the results for the complexation of alkali ions with crown ether 18C6.     

A study of the stability of alkaline-earth metal complexes with fluoride and chloride ions at various temperatures by potentiometry with ion-selective electrodes

The complexes of the alkaline earth metals with fluoride and chloride were studied over the temperature range 15-85 degrees . The stability constants of the MX(+) complexes were determined by potentiometry with fluoride and chloride ion-selective electrodes and the appropriate thermodynamic functions (DeltaH(0)(298), DeltaS(0)(298) and DeltaG(0)(298)) were calculated.     

Synthesis of first representatives of alkaline-earth metal diselenophosphinates

A three-component reaction between secondary phosphines, elemental selenium, and calcium or barium hydroxides in a molar ratio of 1: 2: 0.5 proceeds under mild conditions (70?C75 °C, 10 min, aqueous ethanol) to give previously unknown Ca and Ba diselenophosphinates (78?C89%).