Preconcentration of trace amounts of manganese from natural waters by means of a macroreticular poly(dithiocarbamate) resin

A chelating poly(dithiocarbamate) resin (PDTC) with macroreticular support is characterized as effective collector for traces of manganese from natural waters. Using small PDTC columns preconcentration of manganese can be achieved even at high flow-rates (5-6 ml/min) and sample volumes (1500 ml). Accordingly, PDTC resin is used for the preconcentration of manganese from water samples prior to its determination by flame atomic-absorption spectrometry. A series of ions abundant in natural waters do not interfere. The sensitivity and detection limit were 2.5 and 0.5 mug/l., respectively. The relative standard deviations of the results for a manganese concentration of 40-400 mug/l. are in the range 1.1-6.2%. In mineral and tap waters analysed, the manganese concentration range was between 2.9 and 30.8 mug/l.     

Determination of Manganese(II) with Preconcentration on Almond Skin and Determination by Flame Atomic Absorption Spectrometry

Almond skin was used as a biosorbent by solid-phase extraction for the preconcentration of manganese(II) before the determination by flame atomic absorption spectrometry. Characterization of almond skin was performed by infrared spectroscopy. The functional groups of the almond skin surface were shown to be beneficial for the adsorption of manganese(II). At pH 6.0, the manganese(II) ions were retained on the almond skin and afterward quantitatively eluted using 1.5?mol?L^?1 nitric acid. The pH, flow rate and volume of sample, concentration, and flow rate of eluent and interfering ions were characterized. Using a sample size of 30?mL, a linear dynamic range of 1–120?µg?L^?1 was obtained. A detection limit of 0.24?µg?L^?1 manganese(II) and a relative standard deviation of 1.6% at 30?µg?L^?1 were achieved. The accuracy of the present procedure was evaluated by the determination of manganese(II) in a certified reference material (GSB07-1189-2000). The protocol was also used for the determination of manganese(II) in wastewater. The fortified recoveries were from 99.0 to 99.4%.     

First Synthesis of a Binuclear [Mn(II)(bipy)-Fe(III)(porphyrin)] Complex: Spectroscopic Characterization and First Evidence of Reversible Formation of Manganese(III) as Manganese Peroxidase

A [(P)Fe(III)-Mn(II)] bimetallic complex, mimicking the active site of manganese peroxidase, has been synthesized. A modified highly fluorinated porphyrin, 5,10,15-tris(pentafluorophenyl)-20-(o-aminophenyl)porphyrin, has been used to introduce, through a short spacer linked to the amino function, a manganese auxiliary ligand, 6-aminomethyl-2,2'-bipyridine. Two successive metalations by FeCl(2) and MnCl(2) afforded the [(P)Fe(III)-Mn(II)] bimetallic complex that has been characterized by elemental analysis and FAB(+) mass spectrometry. X-band EPR spectroscopy and magnetic susceptibility measurements were in agreement with two high spin Fe(III) and Mn(II) centers without magnetic exchange interaction. Moreover, there is no higher intermolecular association through &mgr;-chloro bridging as observed by EPR with a simpler chloromanganese complex, Mn(bipy)(2)Cl(2), at high concentration. Addition of pentafluoroiodosobenzene in methanol at 0 degrees C led to the progressive and complete disappearance of the EPR Mn(II) signals, that were recovered after addition of a phenol. This result is consistent with Mn(III) formation. This production of Mn(III) requires the presence of the iron porphyrin and is proposed to occur through the intermediate formation of a Fe(IV) dimethoxide species which can be related to the oxidation of Mn(II) catalyzed by manganese peroxidase compound II.     

Determination of heavy metals at sub-ppm levels in seawater and dialysis solutions by FAAS after tetrakis(pyridine)-nickel(II)bis(thiocyanate) coprecipitation.

A coprecipitation method has been developed for the determination of Cr(III), Mn(II), Fe(III), Co(II), Cu(II), Cd(II) and Pb(II) ions in aqueous samples by flame atomic absorption spectrometry (FAAS) with the combination of pyridine, nickel(II) as a carrier element and potassium thiocyanate as an auxiliary complexing agent. The obtained coprecipitates were dissolved with nitric acid and measured by FAAS. The coprecipitation conditions, such as the effect of the pH, amounts of nickel, pyridine and potassium thiocyanate, sample volume, and the standing time of the precipitate formation were examined in detail. It was found that the metal ions studied were quantitatively coprecipitated with tetrakis(pyridine)-nickel(II)bis(thiocyanate) precipitate (TP-Ni-BT) in the pH range of 9.0 - 10.5. The reliability of the results was evaluated by recovery tests, using synthetic seawater solutions spiked with the analyte metal ions. The obtained recoveries ranged from 96 to 101% for all of the metal ions investigated. The proposed method was validated by analyses of two certified reference materials (NIST SRM 2711 Montana soil and HPS Certified Waste Water Trace Metals Lot #D532205). It was also successfully applied to seawater and dialysis solution samples. The detection limits (n = 25, 3s) were in the range of 0.01-2.44 microg l(-1) for the studied elements and the relative standard deviations were < or =6%, which indicated that this method could fully satisfy the requirements for analysis of such samples as seawater and dialysis solution having high salt contents.     

The microstructures of biomineralized surfaces: a spectroscopic study on the exoskeletons of fresh water (Apple) snail, Pila globosa

In view of the importance in understanding biomineralization processes in different molluskan species, the common fresh water apple snail Pila globosa in Indian origin was taken to explore its mineralized exoskeleton structures. The detailed structural studies of the exoskeletons of P. globosa have been undertaken. The isolated layers present in these shells were studied by electron paramagnetic resonance (EPR), optical absorption, and infrared spectral techniques. The EPR spectra of the organic protein layer periostracum show the characteristic signals corresponding to Fe(3+) ions at g = 4.1 and 2.0. The EPR spectra of the ostracum (middle) layer at room temperature gives a complicated spectrum consisting of a number of Mn(2+) signals of at least three sets due to the aragonite nature of the material. The results indicate the presence of the multivalent manganese ions, which undergo the redox mechanisms. The thermal variation of the EPR spectra show marked effect on these samples both in g-values and the basic spectral pattern.     

Electrosynthesis of a new selective chelating agent for solid phase extraction of Ni(II) from water samples: characterisation and analytical applications

A new polymer as a selective chelating agent for separation and preconcentration of nickel ions from water samples was prepared by electropolymerisation of 4-nitrophenol. Electrosynthesis was carried out on the lead cathode in aqueous sodium acetate solution. The electrode-product is a dark-brown powder, insoluble in water but soluble in methanol, N,N-dimethylformamide (DMF) and tetrahydrofuran (THF). The electrode-product was characterised by differential scanning calorimetry (DSC), gel permeation chromatography (GPC), FT-IR, ¹H-NMR, cyclic voltammetry (CV) and UV-Vis spectrometry. A proper mechanism and structure of the prepared polymer was suggested. A few drops of methanolic solution of electrode-product formed a blue complex with nickel ions in an aqueous medium in the pH range of 6 to 10. This new chelating reagent was used as a coating material on activated charcoal and applied for solid phase extraction of trace amounts of nickel ions from natural and waste waters. The effect of different parameters such as type of eluent, elution conditions, sample volume and sample flow rate and mass of coating material were studied. In the presence of co-existing ions, no significant interferences were observed. Under the optimal conditions, limits of detection (LOD) and quantification (LOQ) were 0.32 and 1 µg L^?1 Ni(II), respectively. The proposed method was used for determination of Ni(II) in some lagoons south of the Caspian Sea and waste waters of factories. The validity of this method was confirmed by the comparison of the obtained results with the results of ICP-OES.     

Physico-chemical properties of the copper(II)-poly-4-vinylpyridine complexes

Water-soluble Cu(II) complexes of poly-4-vinylpyridine, partially quaternized by methyl bromide or dimethylsulphate (PP, Mt) and of the analogue (4-ethylpyridine) were studied by physicochemical technique such as visible spectrophotometry, viscosity, speed sedimentation and EPR spectroscopy. Peculiarities of the complex formation reaction were observed for the polymer compared to the analogue. The predominant formation of tetrapyridinate-Cu(II) species [(CuL₄)]²⁴ was found to take place in aqueous solution for PP, Mt with degree of quaternization (β) 20,24,37,49,57,65 per cent over a wide range of P_YJ Cu(II) molar ratios. In addition, not all the free polymer pyridine residues are capable of forming [Cu L4 ]² complexes even though there is a large excess of Cu(II) ions. The maximum value of the pyridine fraction forming [Cu L₄ ]²¹ in PP_YMt-20, 24, 37, 49 (obtained by spectroscopic titration) was found to be 45–50 per cent. Addition of Cu(NO₃)₂ to the aqueous polymer solution causes strong reduction of specific viscosity and increase of sedimentation coefficient from - 1 S to - 6 S. These data lend to the suggestion of the existence of macromolecular associates bound by Cu(II) ions and approximate estimation of their average molecular weight. It was shown also that Bjerrum's procedure cannot be used to account for the polymer stability constants. The differences between complex formation for polymer pyridine and monomer pyridine seem to be due to the high local pyridine concentration in the coil of the macromolecule and the hydration effects of the polymer chain on the characteristics of the pyridine residues.     

EPR study of copper(II) complexes of hydroxysalen derivatives in order to be used in the DNA cleavage

Two series of functionalized hydroxy-salen-copper(II) complexes with various side chain lengths have been synthesized. The first one is characterised by amino side chain protected by the tert-butyloxycarbonyl group (Boc) whereas, the second series is obtained by removal of the Boc-protecting group under acidic conditions and formation instead of it an ammonium salt. EPR studies were carried out on the copper(II) complexes. EPR signals attributed to monomers and dimers of Cu2+ species were evidenced. Determination of the copper(II) environment in each complex was attempted using all the experimental results. Square planar and tetrahedral symmetries were found for the copper(II) monomers. From the fine structure observed for the pair signal, the distance between the Cu2+ ions in the pair has been calculated (3.9-4.3A). From these values, it seems that the formation of pairs is obtained by a face-to-face bimolecular association.     

Rapid automated in-situ monitoring of total dissolved iron and total dissolved manganese in underground water by reverse-flow injection with chemiluminescence detection during the process of water treatment

Measurement of iron and manganese is very important in evaluating the quality of natural waters. We have constructed an automated Fe(II), total dissolved iron(TDI), Mn(II), and total dissolved manganese(TDM) analysis system for the quality control of underground drinking water by reverse flow injection analysis and chemiluminescence detection(rFIA-CL). The method is based on the measurement of the metal-catalyzed light emission from luminol oxidation by potassium periodate. The typical signal is a narrow peak, in which the height is proportional to light emitted and hence to the concentration of metal ions. The detection limits were 3 x 10(-6)mug ml(-1) for Fe(II) and the linear range extents up to 1.0 x 10(-4) and 5 x 10(-6)mug ml(-1) for Mn(II) cover a linear range to 1.0 x 10(-4)mug ml(-1). This method was used for automated in-situ monitoring of total dissolved iron and total dissolved manganese in underground water during water treatment.     

Solution chemistry of copper(II)-gentamicin complexes: relevance to metal-related aminoglycoside toxicity

The adverse effect to the inner ear of aminoglycosides, drugs widely administered for the treatment of serious infections, appears to result from the interaction of these drugs with Cu(II) or Fe(II)/Fe(III) ions. To understand more completely the metal-induced side effects of one such antibiotic, gentamicin, we studied copper(II) coordination to gentamicin C1a by potentiometry, UV-vis, CD, and EPR spectroscopies, and ESI mass spectrometry. Only monomeric complexes of the CuH(n)L stoichiometry, with n ranging from 3 to -2, were detected over the pH range of 4-12. CuH(3)L and CuH(2)L complexes exhibit the same coordination mode, binding copper(II) through the amino nitrogen atom and a deprotonated alcoholic oxygen atom of the garosamine ring. In the CuHL and CuL complexes a second amino nitrogen atom of the purpurosamine ring participates in central ion coordination. Finally, the additional axial binding of the deprotonated oxygen of the hydroxyl group of the 2-deoxystreptamine moiety occurs in the CuH(-)(1)L and CuH(-)(2)L complexes. Interactions of the Cu(II)-gentamicin-H(2)O(2) system at pH 7.4 with N,N-dimethyl-p-nitrosoaniline, arachidonic acid, and plasmid DNA confirmed that gentamicin complexes facilitate oxidative reactions leading to peroxidation of arachidonic acid and scission of double-stranded DNA mediated by copper-bound reactive oxygen species. However, the stability constants of Cu(II)-gentamicin complexes are inferior to the binding constants of copper(II) complexes with other components of human serum or cells. Computer simulations of copper(II) distribution in the human blood plasma showed that the concentration of gentamicin would have to be at impossible levels (100 M) before a significant fraction of Cu(II) ions would be bound to gentamicin. Further, once introduced into aqueous solution, histidine replaces gentamicin in Cu(II)-gentamicin complexes. Therefore, Cu(II)-gentamicin complexes might not exist under physiological conditions.     

An EPR study of various compounds of copper (II) and silver (II)

The electron paramagnetic resonance (EPR) spectra in the three-centimeter and decimeter wavelength ranges have been studied in liquid and frozen solutions of copper(II) and silver(II) in ortho-, pyro-, and metaphosphoric acids, sulfuric acid, and nitric acid, and also in liquid and frozen solutions of Cu(II) in fluorosilicic acid. The parameters of the spin Hamiltonian have been determined. It has been shown that the magnetic ion M(II) in these compounds is situated in an axially distorted octahedron, formed by six oxygen atoms. The EPR spectra of frozen solutions of M(II) in ortho-, pyro-, and metaphosphoric acids, obtained by the procedure described in the present paper, do not differ from one another. Study of the EPR spectra over a wide range of frequencies has shown that for the Cu(II) compounds the condition of strong fields is satisfied as far as 800–1000 MHz, but on going to lower frequencies the condition of intermediate fields is satisfied. For the Ag(II) compounds the condition of strong fields is satisfied throughout the entire range of frequencies studied. It can be seen from the experimental results obtained that the values of the anisotropic hyperfine splitting (HFS) constants, reduced to unit magnetic moment of the corresponding nuclei, increase on going from the Cu(II) ions with n=3 to the Ag(II) ions with larger principal quantum number (n=4).In conclusion the authors thank B. M. Kozyrev for extensive discussion of the results and L. F. Shatrukov for assistance with the calculation of the spectra on the electronic computer.     

THERMODYNAMICS ADSORPTION OF MANGANESE ION ON 1-（2-PYRIDYLAZO）-2-NAPHTHOL-6-SULPHONIC ACID IMPREGNATED RESIN

An ion-exchange resin of type 201×7 was impregnated with the reagent 1-（2-Pyridylazo）-2-naphthol-6-sulphonic Acid （PAN-S）. The adsorption characteristics of PAN-S resin for manganese ion were studied on the static equilibrium adsorption. Within temperature range of 288K-313K and the concentration range investigated, equilibrium data for the adsorption of manganese ions from aqueous solutions by PAN-S resin were obtained and correlated with Freundlich and Langmuir equation. The results showed that the process of the adsorption of manganese ions from aqueous solution by PAN-S was an exothermic process. Estimations of the isothermic enthalpy change of adsorption, free energy change and entropy of adsorption are reported, and the adsorption behaviors are reasonably interpreted.     

Detection of low molecular weight aldehydes in aqueous solution by membrane introduction mass spectrometry

Membrane introduction mass spectrometry (MIMS) is used to detect low molecular weight aldehydes in aqueous solutions. The best sensitivity was obtained by aqueous phase derivatization of aldehydes with O-(2,3,4,5,6-pentafluorobenzyl)-hydroxylamine (PFBOA) and electron capture detection. This negative chemical ionization mass spectrometry procedure allowed the measurement of C(1)C(6) aldehydes at low concentrations in mixtures. The characteristic ion signals in the mass spectrum of the mixture were verified by examining the full mass spectra and product ion MS/MS spectra of the derivatives of individual aldehydes. A reaction scheme is proposed to explain the fragmentation pattern of the molecular anions (M(-.)) of the derivatives. The processes observed include loss of HF to form (MHF)(-.) ions which then competitively fragment by elimination of H(R)CN and NO(.) to produce ions of m/z 178 and (M-50)(-.), respectively. Multiple reaction monitoring was applied to establish the lower limits of detection. Formaldehyde could be detected without preconcentration at 1 ppb with S/N = 3/1. The detection limits of acetaldehyde, propanal and butanal were found to be 10 ppb and that of pentanal and hexanal were found to be 20 ppb. Response curves vs. concentration are linear in the ppb range. This method is not as readily applicable to the corresponding ketones.     

Novel EPR characterization of the antioxidant activity of tea leaves

Electron paramagnetic resonance (EPR) spectroscopy is utilized to investigate several categories of green and black tea: Twining green tea (TGT), Chinese green tea (CGT), Red-labels black tea (RBT). Basically, two EPR signals from all the studied samples are observed: One of them is a very weak sharp EPR signal with deltaHpp approximately 10 G and g-factor = 2.00023 superimposed on the other broad signal with deltaHpp approximately 550 G and g-factor = 2.02489. The broad signal is a characteristic one of manganese(II) complex, while the sharp signal is related to a stable radical of aromatic origin exist in a powder condition. The feature of the manganese EPR signal is attributed to manganese(II) complex and reflected the molecular behavior of Mn(II) in the protein system of the natural leaves. The sharp signal, which is most probably due to a semiquinones radicals, is observed at room temperature and its intensity is remarkably affected by photo degradation of the studied samples. The intensity of manganese(II) EPR signal is found to be related to ageing and disintegration of the tea leaves. Moreover, direct relation between the relative intensity of the semiquinones radical signal and antioxidant activity of the studied samples was also correlated.     

Indirect spectrophotometric determination of chloride by solvent extraction as tris(1,10-phenanthroline)iron(II) thiocyanate

An indirect spectrophotometric method for the determination of small amounts of chloride in fresh waters is described. Chloride ions react with mercury(II) thiocyanate to liberate thiocyanate ions, which can be selectively extracted into nitrobenzene with tris(1,10-phenanthroline)iron(II) chelate cations. The red color (516 nm) of the organic phase measured against a reagent blank is proportional to the initial concentration of chloride ions in the aqueous phase. At least an equimolar amount of tris(1,10-phenanthroline)iron(II) chelate and a 3-fold amount of mercury(II) thiocyanate are needed; the optimal pH range is 1.5–3.5. Beer's law is obeyed over the concentration range of 0.8–5.6 10^-5 M of chloride. The color stability and the apparent sensitivity are better than those of the mercury(II) thiocyanate-iron(III) method. Large amounts of sulphate, phosphate, fluoride, carbonate, acetate, potassium, sodium, and ammonium ions had negligible or no effect ; bromide, iodide, cyanide, sulphide, and thiocyanate interfere.     

Pyridine analogues of the antimetastatic Ru(III) complex NAMI-A targeting non-covalent interactions with albumin

A series of pyridine-based derivatives of the antimetastatic Ru(III) complex imidazolium [trans-RuCl(4)(1H-imidazole)(DMSO-S)] (NAMI-A) have been synthesized along with their sodium-ion compensated analogues. These compounds have been characterized by X-ray crystallography, electron paramagnetic resonance (EPR), NMR, and electrochemistry, with the goal of probing their noncovalent interactions with human serum albumin (hsA). EPR studies show that the choice of imidazolium ligands and compensating ions does not strongly influence the rates of ligand exchange processes in aqueous buffer solutions. By contrast, the rate of formation and persistence of interactions of the complexes with hsA is found to be strongly dependent on the properties of the axial ligands. The stability of noncovalent binding is shown to correlate with the anticipated ability of the various pyridine ligands to interact with the hydrophobic binding domains of hsA. These interactions prevent the oligomerization of the complexes in solution and limit the rate of covalent binding to albumin amino acid side chains. Electrochemical studies demonstrate relatively high reduction potentials for these complexes, leading to the formation of Ru(II) species in aqueous solutions containing biological reducing agents, such as ascorbate. However, EPR measurements indicate that while noncovalent interactions with hsA do not prevent reduction, covalent binding produces persistent mononuclear Ru(III) species under these conditions.     

Influence of the Mn(II) and CH4 on the evolution of light induced radicals in chloroplasts

The photochemical activity of the leaves and chloroplasts of several species of plants developed in gaseous hydrocarbon environments (C_nH_2n+2) was investigated by the EPR method. The influence of different concentrations of paramagnetic ions [Mn(II), Cu(II) and VO(II), respectively] on the plants grown in dietary media containing these ions was also followed by EPR spectroscopy. The contents of paramagnetic ions, lower than 0.1%, in the nutritive solutions, are the most suitable in the biosynthesis of chlorophyll-like pigments containing paramagnetic ions in their porphyrine ring. The changes in the form, structure and photosensibility of the EPR signals corresponding to the free radicals, as well as the properties of the pheophytins containing paramagnetic ions, such as: Mn(II), Cu(II) and VO(II), were related to the photochemical synthesis in gaseous hydrocarbon environments.     

Precision and Accuracy Studies of Impaction-Electrothermal Atomization Atomic Spectrometry

Abstract

The precision of aqueous solutions of cadmium, copper, and manganese introduced as an aerosol by an pneumatic nebulizer and electrothermal vaporizer to an impaction-electrothermal atomization atomic absorption spectrometeric system was in the range of 1–3% which was similar to that obtained by manual introduction of similar concentrations of aqueous solutions of cadmium, copper, and manganese to the electrothermal atomizer and atomic absorption spectrometry. The precision of a laboratory air sample was 7.6–9.9%. Accuracy was assessed by comparison to conventional methods of sampling air by collection on a filter followed by digestion of the filter and analysis by flame atomic absorption spectrometry The levels were found to be 59–69% compared to the conventional method.     

Atomic-fluorescence characteristics and analytical determination of manganese in an air-acetylene flame

The atomic-fluorescence characteristics of manganese atoms in a premixed nitrogen-shielded air-acetylene flame are described. Excitation is obtained at 280 nm from a microwave-excited electrodeless discharge tube. A detection limit of 0-001 ppm for the determination of manganese by atomic-fluorescence spectroscopy is obtained by measurement of the resonance fluorescence observed at this wavelength. In addition to several other weaker atomic-fluorescence signals observed from manganese atoms in the flame, weak resonance fluorescence at 258 and 260 nm from manganese ions stimulated by ion line-emission from the source has been recorded. Linear calibration graphs for atomic-fluorescence measurement at 280 nm are obtained over the range 0.0025-10 ppm of manganese in aqueous solution. Of 26 foreign anions and cations examined for interference at the 1000-fold weight excess level only four produced interference. Large amounts of Si, Th and V interfere by scattering of the incident radiation, while Mg causes depression of the atomic fluorescence by a chemical effect.     

Ni(II), Cu(II), and Zn(II) dinuclear metal complexes with an aza-phenolic ligand: crystal structures,magnetic properties,and solution studies

The basicity behavior and ligational properties of the ligand 2-((bis(aminoethyl)amino)methyl)phenol (L) toward Ni(II), Cu(II), and Zn(II) ions were studied by means of potentiometric measurements in aqueous solution (298.1 +/- 0.1 K, l = 0.15 mol dm-3). The anionic L-H- species can be obtained in strong alkaline solution; this species behaves as tetraprotic base (log K1 = 11.06, log K2 = 9.85, log K3 = 8.46, log K4 = 2.38). L forms mono- and dinuclear complexes in aqueous solution with all the transition metal ions examined; the dinuclear species show a [M2(L-H)2]2+ stoichiometry in which the ligand/metal ratio is 2:2. The studies revealed that two mononuclear [ML-H]+ species self-assemble, giving the dinuclear complexes, which can be easily isolated from the aqueous solution due to their low solubility. This behavior is ascribed to the fact that L does not fulfill the coordination requirement of the ion in the mononuclear species and to the capacity of the phenolic oxygen, as phenolate, to bridge two metal ions. All three dinuclear species were characterized by determining their crystal structures, which showed similar coordination patterns, where all the single metal ions are substantially coordinated by three amine functions and two oxygen atoms of the phenolate moieties. The two metals in the dinuclear complexes are at short distance interacting together as shown by magnetic measurements performed with Ni(II) and Cu(II) complexes, which revealed an antiferromagnetic coupling between the two metal ions. The [Cu2(L-H)2]2+ cation shows a phase transition occurring by the temperature between 100 and 90 K; the characterization of the compounds existing at different temperatures was investigated using X-ray single-crystal diffraction, EPR, and magnetic measurements.