Sorption-catalytic determination of cadmium using bromobenzothiazo noncovalently bound to silica and paper

Cadmium (along with Fe(II), Co(II), Zn(II), and Pb(II) ions) decreases the rate of oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) with KIO4 conducted either without or with Mn(II) as a catalyst. Cadmium(II) is preconcentrated from aqueous solutions on silica plates or paper filters physically modified with a reagent for selective determination of Cd(II), namely 1-[(6-bromo-2-benzothiazolyl)azo]-2-naphthol (bromobenzothiazo, or BBT). The modifier is strongly retained on the both supports at pH 6-10 and does not affect the inhibiting effect of Cd(II) in the indicator reaction. Cadmium is determined by its inhibiting action directly on the sorbents by measuring transmittance (BBT/paper) or reflectance (BBT/silica) with limits of detection of 2 x 10(-4) and 0.03 mg/L, respectively. The proposed hybrid combination of sorption with catalytic detection on the sorbent allows to increase the selectivity factors several times (up to 2 orders) relatively to the determination in solution. Tap water samples and soil extracts were analyzed.     

Separation of (3R, 3′ R)-, (3R, 3′ S; meso)-, (3S, 3′ S)- Zeaxanthin, (3R, 3′ R, 6′ R)-, (3R, 3′ S, 6′ S)- and (3S, 3′ S, 6′ S)-Lutein via the dicarbamates of (S)-(+)-α-(1-naphthyl) ethyl isocyanate

A method is described for the qualitative and quantitative determination of configurational isomers of zeaxanthin (=3,3′ -dihydroxy-β, β -carotene) and lutein (=3,3′ -dihydroxy-α -cartotene). It is based on the reaction of these zeaxathin and lutein isomers with (S)-(+)-α-(1-naphthyl) ethyl isocyanate to afford diastereomeric dicarbamates, which are analyzed by HPLC.     

Spectrophotometric determination of molybdenum based on charge transfer complex in PVA medium

A very simple, selective and sensitive method was developed for the spectrophotometric determination of Mo in the presence of W. The method was based on the formation of color charge transfer complex, molybdotungstophosphate-3,3',5,5'-tetramethylbezidine anion, which was solubilized and stabilized in PVA medium. Following the recommended procedure, molybdenum could be determined in the linear range of 0.04-2.5 mug ml(-1) and the molar absorptivity was 1.47x10(4) l mol(-1) cm(-1) at 660 nm. The proposed method had been applied to the determination of trace molybdenum in tungsten ore with satisfactory results.     

Urea and Thiourea Derivatives of Bis(dimethyl-phosphinoylmethyl)-amine

A group of hitherto unknown 1-aryl-3,3-bis(dimethyl-phosphinoylmethyl)-, 1-benzyl-3,3-bis(dimethyl-phosphinoylmethyl)- and 1-cyclohexyl-3,3-bis(dimethyl-phosphinoylmethyl) ureas and thioureas 1-10 have been synthesized, characterized, and are reported in this article. The compounds were prepared via reaction of corresponding isocyanates or isothiocyanates with the secondary phosporus-containing amine: bis(dimethyl-phosphinoylmethyl)-amine. The composition of the novel compounds was proved by elemental analysis, corresponding structures were confirmed by IR, 1 H-, 31 P-, 31 P{ 1 H}-NMR spectroscopy and by mass spectrometry.     

Sorption-catalytic determination of cadmium using bromobenzothiazo noncovalently bound to silica and paper

Cadmium (along with Fe(II), Co(II), Zn(II), and Pb(II) ions) decreases the rate of oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB) with KIO₄ conducted either without or with Mn(II) as a catalyst. Cadmium(II) is preconcentrated from aqueous solutions on silica plates or paper filters physically modified with a reagent for selective determination of Cd(II), namely 1-[(6-bromo-2-benzothiazolyl)azo]-2-naphthol (bromobenzothiazo, or BBT). The modifier is strongly retained on the both supports at pH 6–10 and does not affect the inhibiting effect of Cd(II) in the indicator reaction. Cadmium is determined by its inhibiting action directly on the sorbents by measuring transmittance (BBT/paper) or reflectance (BBT/silica) with limits of detection of 2 × 10^–4 and 0.03 mg/L, respectively. The proposed hybrid combination of sorption with catalytic detection on the sorbent allows to increase the selectivity factors several times (up to 2 orders) relatively to the determination in solution. Tap water samples and soil extracts were analyzed.     

分散固相萃取净化/液相色谱-串联质谱法测定化妆品中7种氨基苯甲醚

建立了同时测定化妆品中7种氨基苯甲醚类化合物(邻氨基苯甲醚、间氨基苯甲醚、对氨基苯甲醚、2,4-二氨基苯甲醚、2,5-二氨基苯甲醚、3,4-二氨基苯甲醚、3,3'-二甲氧基联苯胺)的分散固相萃取净化液相色谱-串联质谱(LC-MS/MS)分析方法。样品用甲醇-水(1∶1,含0.1%甲酸)溶液提取,经PSA分散固相萃取净化后,样液经Welch Ultimats XB-C_(18)(4.6 mm×150 mm,5μm)色谱柱分离,多反应监测(MRM)模式检测,以保留时间和特征离子对定性,外标法定量。结果表明,7种氨基苯甲醚类化合物在0.10~200.0μg/L浓度范围内线性关系良好,相关系数均大于0.998;方法检出限(S/N=3)为0.4~10.9μg/kg。样品日内回收率为64.7%~98.1%,相对标准偏差(RSD,n=6)为1.2%~10.6%;日间精密度(n=5)为2.3%~9.8%。对30个不同水剂类化妆品检测发现,其中1个样品检出3,3'-二甲氧基联苯胺,含量为5.3μg/kg。该方法准确可靠,适用于化妆品中7种氨基苯甲醚的同时测定。     

Analysis of six aromatic amines stability in workplace measurement

For aromatic amine determination in workplaces, stabilities of six types of carcinogenic aromatic amines (2,4-diaminotoluene, 4,4'-diamino-3,3'-dimethyldiphenylmethane, o-tolidine, 3,3'-dichlorobenzidine, 4,4'-methylenebis(2-chloroaniline), and o-dianisidine) were evaluated with air or argon gas bubbling for 45 min in aqueous solution under light irradiation (desk lamp) and heating conditions. Gas chromatography–mass spectrometry (GC–MS) was used to identify and quantify the aromatic amines. The following conditions were selected: temperature program 70°C (1 min), 7 grad/min up to 120°C (1 min), 10 grad/min up to 300°C (5 min), carrier gas flow rate 1.0 mL/min. 3,3'-Dichlorobenzidine concentration decreased by approximately 10% after irradiation with a desk lamp for 45 min in distilled water, and a monochloro compound was detected by GC–MS. The other aromatic amines were rarely different from the 0-min concentration. The shielding prevented the decomposition of 3,3'-dichlorobenzidine in distilled water.     

Simultaneous spectrophotometric determination of cyanide and thiocyanate after separation on a melamine-formaldehyde resin

A simple indirect spectrophotometric method for the determination of cyanide, based on the oxidation of the cyanide with chlorine (Cl(2)) is described. The residual chlorine is determined by the color reaction with o-tolidine (3,3'-dimethylbenzidine). The maximum absorbance for Cl(2) is at 437 nm. A linear calibration graph (0-4.0x10(-5) M CN(-)) is obtained under optimal reaction conditions at room temperature and pH 11-12. The stoichiometric mole ratio of chlorine to cyanide is 1:1. The effective molar absorptivity for cyanide is 5.87x10(4) l mol(-1) cm(-1) at pH 1.6. The limit of quantification (LOQ) is 3.6x10(-7) M or 9.4 ppb. Effects of pH, excess reagent, sensitivity, reaction time and tolerance limits of interferent ions are reported. The method was applied to the determination of cyanide in a real sample. The basic interferent usually accompanying CN(-), i.e. thiocyanate, is separated from cyanide by sorption on a melamine-formaldehyde resin at pH 9 while cyanide is not retained. Thiocyanate is eluted with 0.4 M NaOH from the column and determined spectrophotometrically using the acidic FeCl(3) reagent. The initial column effluent containing cyanide was analyzed by both the developed chlorine-o-tolidine method and the conventional barbituric acid-pyridine (Spectroquant 14800) procedure, and the results were statistically compared. The developed method is relatively inexpensive and less laborious than the standard (Spectroquant) procedure, and insensitive to the common interferent, cyanate (CNO(-)).     

Metallacarboranes as building blocks for polyanionic polyarmed aryl-ether materials

Polyanionic species have been obtained in high yield by a new route in the ring-opening reaction of cyclic oxonium [3,3'-Co(8-C4H8O2-1,2-C2B9H10)(1',2'-C2B9H11)] (2) by using carboxylic acids, Grignard reagents, and thiocarboranes as nucleophiles. The crystal structures of Na3(H2O)(C2H5OH)[1',3',5'-{3,3'-Co(8-O(CH2CH2O)2-1,2-C2B9H10)(1',2'-C2B9H11)}3-C6H3] and Na(H2O)[3,3'-Co(8-O(CH2CH2O)2C(O)CH3-1,2-C2B9H10)(1',2'-C2B9H11)] show that the chain contributes three or two oxygen atoms for coordination to Na(+), and interestingly, the [3,3'-Co(1,2-C2B9H11)2](-) moiety provides extra B-H coordination sites. These B-H...Na interactions in the solid state have also been confirmed by dynamic NMR studies in solution. These new polyanionic compounds that contain multiple carborane or metallacarborane clusters at their periphery may prove useful as new classes of boron neutron capture therapy compounds with enhanced water solubility and as a core to make a new class of dendrimers.     

Determination of trace phosphate ion with 3,3',5,5'-tetramethylbenzidine using a flotation-extraction preconcentration method and spectrophotometric detection

A flotation-extraction method for sensitivity enhancement in spectrophotometry is proposed. The method is based on the reaction among molybdate, phosphate and 3,3',5,5'-tetramethylbenzidine (TMB) in acidic medium to form an color charge transfer complex ion. It forms an ion associate with positive ions and floated at the water/benzene interface simultaneously, and then extracted by the DMSO-formic acid directly and determined by spectrophotometry. The proposed method is simple and convenient. The apparent molar absorptivity is 4.03x10(5) L mol(-1) cm(-1) at 458 nm. The proposed method has been applied to the determination of phosphate in wastewater with satisfactory results.     

Highly stable neutral and positively charged dicarbollide sandwich complexes

Novel sandwich metallacarboranes commo-[3,3'-Ni(8-SMe2-1,2-C2B9H10)2] (1), commo-[3,3'-Co(8-SMe2-1,2-C2B9H10)2]+ (2+), commo-[3,3'-Ru(8-SMe2-1,2-C2B9H10)2] (4) and commo-[3,3'-Fe(8-SMe2-1,2-C2B9H10)2] (5) have been prepared by reaction of [10-SMe2-7,8-nido-C2B9H10]- with NiCl2 x 6 H2O, CoCl2, [RuCl2(dmso)4] and [FeCl2(dppe)], respectively. Reduction of 2+ with metallic Zn leads to the neutral and isolable complex commo-[3,3'-Co(8-SMe2-1,2-C2B9H10)2] (3). Theoretical calculations using the ZINDO/1 semiempirical method show three energy minima for complexes 1-3 and 5 that agree with the presence of three different rotamers in solution at low temperature, while four relative energy minima have been found for 4. The calculated rotational energy barriers for complexes 1-5 have been found in the range 5.2+/-0.2 and 11.5+/-0.2 kcal mol(-1). These values are in agreement with the experimental data calculated for complexes 2+ and 5. Only one rotamer is found in the X-ray crystal structure of complexes 1-3, while two are observed for 4. Neutral complexes 1, 3 and 4 exhibit a gauche conformation, whereas a cisoid conformation is found for the 2+ ion. Rotamers evident from X-ray diffraction studies are in agreement with the global energy minimum calculated by the ZINDO/1 method. The electrochemical studies conducted on 1, 3, 4 and 5 support the proposal that the charge-compensated ligand [10-SMe2-7,8-nido-C2B9H10]- stabilises lower oxidation states in metals than the dianionic [7,8-nido-C2B9H11]2- and even the [C5H5]- ligands.     

Spectrophotometric determination of oxalate ion with N,N'-diethyl-N,N'-[[4,4'-dihydroxy-1,1'-binaphthalene]-3,3'-diyl]bisbenzamide and copper(II).

A simple and rapid spectrophotometric method for the determination of oxalate ion was established by the fading of a colored complex between N,N'-diethyl-N,N'-[[4,4'-dihydroxy-1,1'-binaphthalene]-3,3'-diyl]bisbenzamide and copper(II). Beer's law was obeyed in the concentration range of 0.1 - 2.0 microg cm(-3) for oxalate ion, with an effective molar absorptivity at 533 nm and the relative standard deviation being 8.0 x 10(3) dm(3) mol(-1) cm(-1) and 1.0% (n = 5), respectively. This proposed method has excellent reproducibility, and was applied to recovery tests of oxalate ion in tap water and human urine; the results were satisfactory. This is suggested that the method is based on the reaction of copper(II) to copper(I) with oxalate ion.     

Metal-dependent reactions of bulky metal(II) amides M[N(SiMe3)2]2 with 3,3'-disubstituted binaphthols (HO)2C20H10(SiR3)2-3,3': selective conversion of one equivalent -OH group to a silyl ether -OSiMe3

The outcome of the reaction of the bulky metal(II) amides M[N(SiMe3)2]2. nTHF (M = Be, Zn, Ge, Sn, n = 0; M = Mg, Ca, n = 2) with (R)-3,3'-bis(trimethylsilyl)-1,1'-bi-2,2'-naphthol ((R)-1) or (S)-3,3'-bis(dimethylphenylsilyl)-1,1'-bi-2,2'-naphthol ((S)-9) depends on the identity of the metal and the nature of the 3,3'-substituents. When M = Be, Zn, or Ge, these amides serve as useful silylation agents that convert only one of the equivalent hydroxyl groups of the binaphthol (R)-1 to a trimethylsilyl ether, whereas the reactions of (R)-1 with the Mg, Ca, or Sn amides generate a polynuclear complex. The reaction pathway for these interconversions was qualitatively monitored using NMR ((1)H and (9)Be) spectroscopy. Treatment of Ge[N(SiMe3)2] 2 with (S)-9 yields both a silyl ether and the chelated germanium(II) binaphthoxide (S)-[Ge{O2C20H10(SiMe2Ph)2-3,3'}{NH3}], which was structurally characterized.     

Isolation of Six New Flavonoids from Melicope triphylla

Six new flavonoids-5-hydroxy-3,8-dimethoxy-3',4':6,7-bismethylenedioxyflavone (1), 3,3',4',5-tetramethoxy-7-(3-methylbut-2-enyloxy)flavone (2), 7-(2-hydroxy-3-methylbut-3-enyloxy)-3,3',4',5-tetramethoxyflavone (3), 7-(2-hydroxy-3-methylbut-3-enyloxy)-3,5-dimethoxy-3',4'-methylenedioxyflavone (4), 7-(2-hydroxy-3-methylbut-3-enyloxy)-3,3',4',5,8-pentamethoxyflavone (5), and 7-(2-hydroxy-3-methylbut-3-enyloxy)-3,5,8-trimethoxy-3',4'-methylenedioxyflavone (6)-were isolated from the leaves of Melicope triphylla. In addition, six already known flavonoids were also detected: 5-hydroxy-3,6,7-trimethoxy-3',4'-methylenedioxyflavone (7), 5,7-dihydroxy-3,3',4',8-tetramethoxyflavone (8), 4',5-dihydroxy-3,3',7,8-tetramethoxyflavone (9), 3,5,6,7,8-pentamethoxy-3',4'-methylenedioxyflavone (10), 3,5,6,7-tetramethoxy-3',4'-methylenedioxyflavone (11), and 3,3',4',5,6,7,8-heptamethoxyflavone (12). The structures of the new compounds were established by spectroscopic methods. Compound 2 displayed ichthyotoxic activity against Japanese killifish (medaka in Japanese) (Oryzias latipes var.) at 10?ppm.     

Synchronous fluorescence and absorbance dynamic liquid drop sensor for cr(VI) determination at the femtomole level

A novel synchronous fluorimetric and absorptiometric technique based on dynamic liquid drops coupled with flow injection is described for the determination of chromium(VI) in aqueous solutions. Drops formed continuously at the end of a quartz capillary tube serve as reactor and optical cell. The reaction between chromium(VI) and 3,3',5,5'-tetramethylbenzidine dichloride (TMB-d) results in a significant decrease in fluorescence and transmitted light intensity, proportional to the logarithm of the concentration of chromium(VI). The transmitted light and fluorescence emission are detected in counter and perpendicular positions of the excitation light by a photomultipler tube and photodiode, respectively. In HCl-NaOAc buffer solution (pH 3.29), the sensor has a wide linear calibration range of 2 x 10(-8)-1 x 10(-4) mol l(-1) chromium(VI) with an absolute mass detection limit of 12.88 fmol.     

Controlled direct synthesis of C-mono- and C-disubstituted derivatives of [3,3'-Co(1,2-C2B9H11)2]- with organosilane groups: theoretical calculations compared with experimental results

Mono- and dilithium salts of [3,3'-Co(1,2-C(2)B(9)H(11))(2)](-), (1(-)), react with different chlorosilanes (Me(2)SiHCl, Me(2)SiCl(2), Me(3)SiCl and MeSiHCl(2)) with an accurate control of the temperature to give a set of novel C(c)-mono- (C(c) = C(cluster)) and C(c)-disubstituted cobaltabis(dicarbollide) derivatives with silyl functions: [1-SiMe(2)H-3,3'-Co(1,2-C(2)B(9)H(10))(1',2'-C(2)B(9)H(11))](-) (3(-)); [1,1'-mu-SiMe(2)-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) (4(-)); [1,1'-mu-SiMeH-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) (5(-)); [1-SiMe(3)-3,3'-Co(1,2-C(2)B(9)H(10))(1',2'-C(2)B(9)H(11))](-) (6(-)) and [1,1'-(SiMe(3))(2)-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) (7(-)). In a similar way, the [8,8'-mu-(1',2'-C(6)H(4))-1,1'-mu-SiMe(2)-3,3'-Co(1,2-C(2)B(9)H(9))(2)](-) (8(-)); [8,8'-mu-(1',2'-C(6)H(4))-1,1'-mu-SiMeH-3,3'-Co(1,2-C(2)B(9)H(9))(2)](-) (9(-)) and [8,8'-mu-(1',2'-C(6)H(4))-1-SiMe(3)-3,3'-Co(1,2-C(2)B(9)H(9))(1',2'-C(2)B(9)H(10))](-) (10(-)) ions have been prepared from [8,8'-mu-(1',2'-C(6)H(4))-3,3'-Co(1,2-C(2)B(9)H(10))(2)](-) (2(-)). Thus, depending on the chlorosilane, the temperature and the stoichiometry of nBuLi used, it has been possible to control the number of substituents on the C(c) atoms and the nature of the attached silyl function. All compounds were characterised by NMR and UV/Vis spectroscopy and MALDI-TOF mass spectrometry; [NMe(4)]-3, [NMe(4)]-4 and [NMe(4)]-7 were successfully isolated in crystalline forms suitable for X-ray diffraction analyses. The 4(-) and 8(-) ions, which contain one bridging -mu-SiMe(2) group between each of the dicarbollide clusters, were unexpectedly obtained from the reaction of the monolithium salts of 1(-) and 2(-), respectively, with Me(2)SiHCl at -78 degrees C in 1,2-dimethoxyethane. This suggests that an intramolecular reaction has taken place, in which the acidic C(c)-H proton reacts with the hydridic Si-H, with subsequent loss of H(2). Some aspects of this reaction have been studied by using DFT calculations and have been compared with experimental results. In addition, DFT theoretical studies at the B3 LYP/6-311G(d,p) level of theory were applied to optimise the geometries of ions 1(-)-10(-) and calculate their relative energies. Results indicate that the racemic mixtures, rac form, are more stable than the meso isomers. A good concordance between theoretical studies and experimental results has been achieved.     

A selective PVC membrane for di- or trinitrophenol based on N,N-dibenzyl-3,3',5,5'-tetramethylbenzidine

A new fluorophore, N,N-dibenzyl-3,3',5,5'-tetramethylbenzidine (NBTMB), was prepared and shown to exhibit significant and analytical usefulness for optical sensing toward 2,4-dinitrophenol or 2,4,6-trinitrophenol (picric acid) when it was immobilized in a plasticized poly(vinyl chloride) (PVC) membrane. When the membrane was applied to aqueous nitrophenol solution, NBTMB was able to extract selectively nitrophenol into the membrane phase. Since the extraction equilibrium was accompanied by fluorescence quenching of NBTMB, the chemical recognition process could be directly translated into an optical signal. The sensor showed reversible response in the concentration range from 2.0 x 10(-7) to 6.0 x 10(-5) mol L(-1) for the detection of 2,4-dinitrophenol in NaOAc-HOAc buffer at pH 4.0. It also showed a fast response time (t95% < 1.5 min) when the sensor was applied to 2,4-dinitrophenol solution at concentration levels of 5.26 x 10(-6) and 2.10 x 10(-5) mol L(-1) alternatively. A working principle is proposed and the responses of this sensor to various kinds of nitrophenol were studied. The sensor was applied to the direct determination of 2,4-dinitrophenol in prepared water samples and the indirect assay of the drug cinchonine and the results obtained were satisfactory.     

Four new isoflavonoids from the stem bark of Erythrina variegata

Bioassay-directed fractionation of the stem bark extract of Erythrina variegata L. has resulted in the isolation of three new isoflavones: 5,4'-dihydroxy-8-(3,3-dimethylallyl)-2'-methoxyisopropylfurano[4,5:6,7]isoflavone (1), 5,7,4'-trihydroxy-6-(3,3-dimethylallyloxiranylmethyl)isoflavone (2), 5,4'-dihydroxy-8-(3,3-dimethylallyl)-2'-hydroxymethyl-2'-methylpyrano[5,6:6,7]isoflavone (3) and a new isoflavanone, 5,4'-dihydroxy-2'-methoxy-8-(3,3-dimethylallyl)-2',2'-dimethylpyrano[5,6:6,7]isoflavanone (4) together with seven known compounds, euchrenone b10 (5), isoerysenegalensein E (6), wighteone (7), laburnetin (8), lupiwighteone (9), erythrodiol (10), and oleanolic acid (11). The structures were determined on the basis of spectroscopic analyses and chemical evidence. The effect of these compounds on the proliferation of rat osteogenic sarcoma (UMR106) is also reported.     

Optimization of conditions for the determination of boron by a ruthenium(II) complex having diol moiety: A mechanistic study

Two ruthenium(II) complexes, [Ru(bpy)(2)(dhbpy-H(-1))](+) and [Ru(bpy)(2)(dhphen)](2+) (bpy=2,2'-bipyridine, dhbpy=3,3'-dihydroxy-2,2'-bipyridine, dhphen=5,6-dihydroxy-1,10-phenanthroline) were examined for use as a colorimetric reagent for the determination of boron. The reactions of boric acid with these two complexes were thermodynamically and kinetically studied in detail in order to specify the reactive species and to set up optimum condition for the determination of boron. The detailed analysis of the kinetic data for the reaction of the latter water-soluble complex showed that both boric acid and borate ion were reactive in an alkaline solution. The thermodynamically and kinetically optimum pH for the determination of boron was ca. 9 at 25 degrees C. A spectrofluorimetric determination of boron with the latter complex was attempted at 600nm with excitation at 360nm, and at pH 8.9 using CHES (N-cyclohexyl-2-aminoethanesulfonic acid) buffer. It was found that a trace amount of boron as low as ca. 2x10(-5)M ( approximately 1ppm) could be detectable.     

Synthesis of 1-[(nitroxyalkoxy)methoxy]-1-triazene 2-oxides,new hybrid nitrogen monoxide donors

1-[(Nitroxyalkoxy)methoxy]-3,3-dialkyl-1-triazene 2-oxides were obtained by the reaction of 3,3-dialkyl-1-hydroxy-1-triazene 2-oxide sodium salts with β- or γ-nitroxyalcohol chloromethyl ethers or by the reaction of 3,3-dialkyl-1-(bromoalkoxymethoxy)-1-triazene 2-oxides with silver nitrate. These compounds can be of interest as new hybrid NO donors in living organisms.