Metal complexes of 4-(2'-thiazolylazo)-resorcinol A comparative study with 4-(2'-pyridylazo)-resorcinol

The acid dissociation constants of 4-(2'-thiazolylazo)-resorcinol (TAR) and the formation constants of the metal complexes formed by this reagent with Cu(II), Ni(II), Co(II), Zn(II) and Mn(II) have been determined potentiometrically at 25° in 50% v/v mixtures of dioxane and water. The values obtained for TAR and the metal complexes are contrasted with similar values for the reagent 4-(2'-pyridylazo)-resorcinol (PAR). Differences and similarities between the co-ordinating tendencies of these two reagents are revealed in terms of the proton displacement constant and the acid dissociation constants of the metal complexes. Evidence is presented which suggests that both TAR and PAR may act as terdentate ligands toward some bivalent metal ions.     

Use of tetracyanoplatinate (ii) for the luminescent detection of metalions

The tetracyanoplatinate(II) (TCP) ion forms insoluble fluorescent compounds with many metal ions. This property has not hitherto been exploited for analytical use. The soluble sodium TCP salt has been applied as a reagent for metal ion detection. Fluorescent precipitates useful for detection of the metal ions were obtained with Y(III), Zr(IV), Ag(I), Zn(II), Cd(II), Hg(I), Hg(II), A1(III), Pb(II), La(III) and Th(IV). Limits of detection ranged from 5 to 200 ppm. With ammonium acetate as a masking agent, selective detection of 10 ppm of silver was achieved in the presence of the other metal ions. As little as 20 ppm of zirconium can be detected in the presence of hafnium, which yields a non-fluorescent precipitate.     

Invetigations into the use of an auxiliary metal ion for indirect amperometri detection

Summary A method for determination of metal ions subsequent to separation by ion chromatography has previously been developed. The method is based on Indirect Amperometric Detection whereby the decrease in the oxidation current, due to a dithiocarbamate ligand added post column, is monitored. Upon elution from the chromatographic column the metal ions are complexed by the ligand. As the complexes formed are electroinactive at the applied potential, the background current decreases according to the metal ion concentration. The method developed in this work involves addition to the reagent of Zn(II) as a auxiliary metal ion to displace the analyte metals from the chromatographic eluent ligand complexes after separation. Sodium bis(2-hydroxy-ethyl) dithiocarbamate was used as the postcolumn derivatising reagent. The addition of Zn(II) to the reagent causes some unforeseen behaviour in the chromatographic system.     

Solid-phase extraction of some heavy metal ions on a double-walled carbon nanotube disk and determination by flame atomic absorption spectrometry

A new preconcentration method was developed for the determination of trace amounts of Cu(II), Fe(III), Pb(II), Ni(II), and Cd(II) on a double-walled carbon nanotube disk. 4-(2-Thiazolylazo) resorcinol was used as a complexing reagent. The effects of parameters, including pH of the solutions, amounts of complexing reagent, eluent type, sample volume, flow rates of solutions, and matrix ions were examined for quantitative recoveries of the studied analyte ions. The retained metal ions were eluted by 2 M HNO3. The LOD values for the analytes were in the range of 0.7-4.4 microg/mL. Natural water samples and standard reference materials were analyzed by the presented method.     

8-Quinolinol-5-sulfonic acid-loaded resin as a preconcentrating agent in the neutron activation analysis of the chalcophile elements (author's transl)]

A chelating agent-loaded resin consisting of 8-quinolinol-5-sulfonic acid and an anion-exchange resin (HOx-resin) was prepared in order to concentrate trace chalcophile elements in natural water samples selectively before neutron activation analysis. The exchange capacity of the Diaion SA No. 100 for the reagent (1.8 meq . g-1 resin) corresponds approximately to that for chloride ion (1.83 meq . g-1 resin), indicating that 8-quinolinol-5-sulfonic acid is adsorbed quantitatively on the exchange site of the resin through the sulfonate anion in the reagent. The basic conditions for the adsorption of the metal ions on the resin were investigated by employing the column method. The nitrate concentration and the pH of the sample solution affect the adsorption behavior of metal ions. Several solutions containing metal ions with varying pH or varying nitrate concentration were applied to the resin column (35 mm x 7 mm phi) with a flow rate of 2.0 cm3 . min-1. As a result, the optimum conditions for the quantitative adsorption of copper(II), zinc(II), cadmium(II), cobalt(II), nickel(II) and manganese(II) were as follows: NO3- less than 0.01 mol . dm-3 pH greater than 4.6. Furthermore, the feasibility of the above conditions as well as quantitative adsorption of the chalcophile elements was confirmed through the neutron activation analysis of the synthesized metal solutions.     

High-performance liquid chromatography with sequential injection for online precolumn derivatization of some heavy metals

HPLC was coupled with sequential injection (SI) for simultaneous analyses of some heavy metals, including Co(II), Ni(II), Cu(II), and Fe(II). 2-(5-Nitro-2-pyridylazo)-5-[N-propyl-N-(3-sulfopropyl)amino]phenol (nitro-PAPS) was employed as a derivatizing reagent for sensitive spectrophotometric detection by online precolumn derivatization. The SI system offers an automated handling of sample and reagent, online precolumn derivatization, and propulsion of derivatives to the HPLC injection loop. The metal-nitro-PAPS complexes were separated on a C(18)-muBondapak column (3.9x300 mm(2)). Using the proposed SI-HPLC system, determination of four metal ions by means of nitro-PAPS complexes was achieved within 13 min in which the parallel of derivatization and separation were processed at the same time. Linear calibration graphs were obtained in the ranges of 0.005-0.250 mg/L for Cu(II), 0.007-1.000 mg/L for Co(II), 0.005-0.075 mg/L for Ni(II), and 0.005-0.100 mg/L for Fe(II). The system provides means for automation with good precision and minimizing error in solution handling with the RSD of less than 6%. The detection limits obtained were 2 microg/L for Cu(II) and Co(II), and 1 microg/L for Ni(II) and Fe(II). The method was successfully applied for the determination of metal ions in various samples, including milk powder for infant, mineral supplements, local wines, and drinking water.     

Steady-state and flow-injection response of a metallic silver electrode for potentiometric detection of metal cyanide complex formartion

A metallic silver electrode provides a potentiometric response to Ag(I), Hg(II), Fe(III), Cu(II), Zn(II), Co(II) and Ni(II) ions, and large changes in the electrode potential of up to 400 mV are observed when these ions are injected into a 0.29 mM soulution of cyanide ion. Injection 10-μl aliquots into a reagent stream with a cyanide concentration of 0.1 mM is shown to give the expected sigmoidal-shaped response curve for peak height as a function of metal ion concentration. Sub-nanomole quantities of metal ions are detectable with a peak height of ca. 20 mV, depending on the cyanide concentration.     

Extraction of copper(II) with 1,2-diacylhydrazines in the presence of associated metals

Conditions of Cu(II), Zn(II), Ni(II), Co(II), and Fe(III) ions extraction (pH values, effect of reagent amount) with symmetrical 1,2-diacylhydrazines derived from straight-chain aliphatic carboxylic acids and α-branched higher carboxylic acids Versatic-10 were studied. The separation coefficients of element pairs and pH of half extraction were calculated. The values of [Cu(II)]: [reagent] ratios in extracted complexes were determined. 1,2-Diacylhydrazines were shown to be more selective extractants toward nonferrous metal ions as compared with carboxylic acids, while the branching and elongation of alkyl chain in the reagents enhances their extraction properties and compatibility with hydrocarbon solvents.     

Use of tube radial distribution of ternary mixed carrier solvents for introduction of absorption reagent for metal ion separation and online detection into capillary

When ternary mixed solvents consisting of water-hydrophilic/hydrophobic organic solvents are fed into a micro-space under laminar flow conditions, the solvent molecules are radially distributed in the micro-space. The specific fluidic behavior of the solvents is called the "tube radial distribution phenomenon (TRDP)". A novel capillary chromatography method was developed based on the TRDP that creates the inner major and outer minor phases in a tube, where the outer phase acts as a pseudo-stationary phase. This is called "tube radial distribution chromatography (TRDC)". In this study, Chrome Azurol S as an absorption reagent was introduced into the TRDC system for metal ion separation and online detection. The fused-silica capillary tube (75 μm id and 110 cm length) and water-acetonitrile-ethyl acetate mixture (3:8:4 volume ratio) including 20 mM Chrome Azurol S as a carrier solution were used. Metal ions, i.e. Co(II), Cu(II), Ni(II), Al(III), and Fe(III), as models were injected into the present TRDC system. Characteristic individual absorption characteristics and elution times were obtained as the result of complex formation between the metal ions and Chrome Azurol S in the water-acetonitrile-ethyl acetate mixture solution. The elution times of the metal ions were examined based on their absorption behavior; Co(II), Ni(II), Al(III), Fe(III), and Cu(II) were eluted in this order over the elution times of 4.7-6.8 min. The elution orders were determined from the molar ratios of metal ion to Chrome Azurol S and Irving-Williams series for bivalent metal ions.     

Immobilized tris(hydroxymethyl)aminomethane as a scaffold for ion-selective ligands: the auxiliary group effect on metal ion binding at the phosphate ligand

The metal ion affinities of a ligand in a polymer-supported reagent can be enhanced by the presence of a proximate group capable of hydrogen bonding. A new polymer-supported reagent has been synthesized by immobilizing tris(hydroxymethyl)aminomethane (Tris) onto cross-linked poly(vinylbenzyl chloride) and then phosphorylating the -OH moieties. The -NH- acts as the auxiliary group to increase the extent of complexation by the phosphate ligand. Additionally, Tris acts as a scaffold, wherein the phosphate ligands are in a known stereochemical arrangement. The Tris resin is mono-, di-, and triphosphorylated, depending on the concentration of the phosphorylating agent. The highest metal ion affinities are found with the resin having a phosphorus-to-nitrogen ratio of 2.36, consistent with one-third of the ligands being triphosphorylated and the remainder being diphosphorylated. The unphosphorylated Tris and phosphonate diester resins have no ionic affinities under the same conditions. Trivalent ions (Fe(III), Al(III), La(III), Eu(III), Lu(III)) are preferred over divalent ions (Pb(II), Cd(II), Cu(II), Zn(II)) from solutions at pH 2. The distribution coefficients of the divalent ions correlate with the Misono softness parameters, indicating that the polarizability of the phosphoryl oxygen is important to binding of the metal ions. The mechanism of complexation is probed with Fe(III) in 0.01-5 M HNO3 and HCl. The high affinities are ascribed to activation of the P=O ligand toward metal ion binding by the N-H moieties acting as auxiliary groups, coupled with intraligand cooperation among the phosphate moieties at a given site. FTIR spectra show that the P=O band at 1261 cm-1 shifts as a function of the extent of hydrogen bonding. Binding at the P=O requires a balance between activation by hydrogen bonding and availability of the lone pair electrons to the metal ions.     

Thiacalix[4]arenetetrasulfonate as specific pre-column chelating reagent for nickel(II) ion in kinetic differentiation mode high-performance liquid chromatography

Thiacalix[4]arenetetrasulfonate (TCAS) has been examined as a pre-column chelating reagent for the determination of trace metal ions by kinetic differentiation mode (KD) ion-pair reversed-phase high-performance liquid chromatography (HPLC) with spectrophotometric detection. Among 14 kinds of common metal ions tested here, viz. Al(III), Ca(II), Cd(II), Co(II), Cr(III), Cu(II), Fe(III), Hg(II), Mg(II), Mn(II), Ni(II), Pb(II), V(V), and Zn(II) ion, only Ni(II) ion was detected as the TCAS chelate in the HPLC separation stage in spite of TCAS forming the chelates with various metal ions except for Al(III), Ca(II), and Mg(II) at the pre-column chelation stage. The undetected metal-TCAS chelates seemed to be dissociated on an HPLC column where no added TCAS was present in the mobile phase because of their kinetic unstability. The calibration graph for Ni(II) ion gave a wide linear dynamic range (40-20,000 nM) with the very low detection limit (DL) (3σ base-line fluctuation) to be 5.4 nM (0.32 ng ml⁻¹). The practical applicability of the KD-HPLC method with TCAS was demonstrated with the determination of trace Ni in coal fly ash.     

The separation of aluminum(III) ions from the aqueous solution on membrane filter using Alizarin Yellow R

The membrane filtration was examined as an effective and selective method for collection of Al(III) ions from aqueous solutions using Alizarin Yellow R, one of a pH-indicator, as a precipitating reagent. For preparation of aqueous solutions without precipitate or turbidity, a non-ionic surfactant, Triton X-100, was used as a solubilizing reagent for insoluble materials. Three metal ions, Al(III), V(III) and Cu(II) ions, were able to be collected as yellow-orange precipitates from aqueous solutions controlled in a range of pH 4-7, pH 4-9, and pH 5.5-12, respectively, on a membrane filter by filtration under suction. Hydrogen peroxide and o-phenanthroline were found to be capable of masking V(III) and Cu(II) ions in a range of pH 5.5-8 in which Al(III) ions were collected. This membrane filtration was applied to selective separation and determination of Al(III) ions in tap water.     

Spectrophotometric determination of metal ions in electroplating solutions in the presence of EDTA with the aid of multivariate calibration and artificial neural networks

Metal ions such as Co(II), Ni(II), Cu(II), Fe(III) and Cr(III), which are commonly present in electroplating baths at high concentrations, were analysed simultaneously by a spectrophotometric method modified by the inclusion of the ethylenediaminetetraacetate (EDTA) solution as a chromogenic reagent. The prediction of the metal ion concentrations was facilitated by the use of an orthogonal array design to build a calibration data set consisting of absorption spectra collected in the 370-760 nm range from solution mixtures containing the five metal ions earlier. With the aid of this data set, calibration models were built based on 10 different chemometrics methods such as classical least squares (CLS), principal component regression (PCR), partial least squares (PLS), artificial neural networks (ANN) and others. These were tested with the use of a validation data set constructed from synthetic solutions of the five metal ions. The analytical performance of these chemometrics methods were characterized by relative prediction errors and recoveries (%). On the basis of these results, the computational methods were ranked according to their performances using the multi-criteria decision making procedures preference ranking organization method for enrichment evaluation (PROMETHEE) and geometrical analysis for interactive aid (GAIA). PLS and PCR models applied to the spectral data matrix that used the first derivative pre-treatment were the preferred methods. They together with ANN-radial basis function (RBF) and PLS were applied for analysis of results from some typical industrial samples analysed by the EDTA-spectrophotometric method described. DPLS, DPCR and the ANN-RBF chemometrics methods performed particularly well especially when compared with some target values provided by industry.     

Cation complexation with p-tert-butylcalix[5]arene pentacarboxylic acid derivative: an allosteric regulation of the first metal ion for stepwise extraction of the second ion

A calix[5]arene based solvent extraction reagent 3, appending carboxylic acid groups at the lower rim, has been developed and its complexation behavior towards some transition metal ions has been studied. The host 3 can selectively and quantitatively extract Pb(II) ions above pH 1.8 while other divalent ions such as Cu(II), Zn(II), Co(II), Ni(II) are extracted quantitatively only above pH 3.0. The outstanding Pb(II) selectivity of 3 comes from the size fit complementarity effect of the Pb(II) ion in the calix[5]arene cavity. One molecule of 3 extracts two Pb(II) ions in a stepwise manner. The first Pb(II) ion is extracted into the deep cavity of the calix[5]arene defined by phenoxy oxygen atoms. The first complexed Pb(II) ion acts as a template to bring the host into a cone conformation and induces a positive allosteric effect for the extraction of the second Pb(II) ion at an oxygen rich coordinating site composed of carboxyl groups. Both the Pb(II) ions are extracted through an ion exchange mechanism and the electroneutral complex in the organic phase is formed by the release of an equivalent number of hydrogen ions into aqueous solution. The loaded Pb(II) is easily back-extracted from Pb(II)-complexed 3 using dilute acid solution.     

Studies on coordination polymers : Part II. Coordination polymers of 1,6-dihydroxyphenazine

Coordination polymers of 1, 6-dihydroxyphenazine (I) with Cu(II), Zn(II), Ni (II), Co(II) and Hg(II) were prepared and studied. All the polymers formed were dark blue to black powders, very insoluble in the common solvents, apparently of low molecular weight, and decomposed at temperatures ranging from 200 to 280°. The zinc polymer was the most stable, mercury the least. Infrared studies confirmed the proposed chelation reaction between the metal ion and (I). The polymers of Co and Hg were amorphous, whereas those of Cu, Zn, and Ni were crystalline. When used as a spot test reagent, (I) gave instant color reactions with 15 common ions but neither the sensitivity nor selectivity of the reagent is impressive.     

Efficient Catalytic Activity of Transition Metal Ions in Vilsmeier–Haack Reactions with Acetophenones

Vilsmeier–Haack (VH) formylation reactions with acetophenones are sluggish in acetonitrile medium even at elevated temperatures. However, millimolar concentrations of transition metal ions such as Cu(II), Ni(II), Co(II), and Cd(II) were found to exhibit efficient catalytic activity in Vilsmeier–Haack Reactions with acetophenones. Reactions are accelerated remarkably in the presence of transition metal ions. The VH reactions followed second order kinetics and afforded acetyl derivatives under kinetic conditions also irrespective of the nature of oxychloride (POCl₃ or SOCl₂) used for the preparation of VH reagent along with DMF. On the basis of UV–vis spectroscopic studies and kinetic observations, participation of a ternary precursor [M(II) S (VHR)] in the rate‐limiting step has been proposed to explain the mechanism of the metal ion–catalyzed VH reaction.     

Palladium(II) Extraction from Hydrochloric Acid Solutions with 4-[(Hexylsulfanyl)methyl]-3,5-Dimethyl-1H-Pyrazole

Palladium(II) extraction from hydrochloric acid solutions with a novel weakly basic complexing reagent, 4-[(hexylsulfanyl)methyl]-3,5-dimethyl-1H-pyrazole, dissolved in chloroform was studied. Palladium(II) was found to be highly efficiently extracted from 0.1–3 mol/L HCl solutions. A coordination mechanism of palladium(II) extraction with a protonated form of the reagent via fast interphase transfer of ion associates was proposed. The composition of the extracted compound, [PdCl₂μ-L]_n (n > 2), was found, and the way of coordination of the reagent to metal ions through N(2) nitrogen atom and thioether sulfur atom was determined. The reagent can be recommended for concentrating palladium(II) and selectively separating it from platinum(IV), copper(II), nickel(II), and iron(III).     

Liquid-liquid extraction of palladium(II) with N-n-octylaniline from hydrochloric acid media

N-n-Octylaniline in xylene is used for the extractive separation of palladium(II) from hydrochloric acid medium. Palladium(II) was extracted quantitatively with 10 ml of 2% reagent in xylene from 0.5-2 M hydrochloric acid medium. It was stripped from the organic phase with 1:1 ammonia and estimated spectrophotometrically with pyrimidine-2-thiol at 420 nm. The effects of metal ion, acids, reagent concentration and of various foreign ions have been investigated. The method affords binary separation of palladium(II) from iron(III), cobalt(II), nickel(II) and copper(II) and is applicable to the analysis of synthetic mixtures and alloys. The method is fast, accurate and precise.     

Solvent extraction separation of tin (IV) with 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (PC-88A)

Solvent extraction of tin(IV) from hydrochloric acid media was carried out with 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (PC-88A) in toluene. Tin(IV) was quantitatively extracted with 2.5x10(-2) M PC-88A in toluene from 0.1-0.3 M HCl when equilibrated for 5 min. Tin(IV) from the organic phase was stripped with 4 M HCl and determined spectrophotometrically by both the morin and pyrocatechol violet method. The nature of the extracted species was determined from the log-log plots. Various other diluents such as xylene, hexane and cyclohexane also gave quantitative extraction of tin. The metal loading capacity of the reagent was found to be 0-15 ppm of tin(IV). The extraction of tin(IV) was carried out in the presence of various ions to ascertain the tolerance limit of individual ions. Tin(IV) was successfully separated from commonly associated metal ions such as antimony(III), bismuth(III), lead(II), thallium(I), copper(II), nickel(II), etc. The method was extended for determination of tin in real samples.     

Extraction and separation studies of platinum(IV) with N-n-octylaniline

N-n-octylaniline in xylene is used for the extractive separation of platinum(IV) from acidic media. Platinum(IV) was extracted quantitatively with 10 ml of 3% reagent in xylene from 0.5 to 10 and 2.5 to 10 M hydrochloric and sulphuric acid, respectively. It was stripped from organic phase with water and estimated photometrically with stannous chloride. The effect of metal ion, acids, reagent concentration and of various foreign ions has been investigated. The method affords binary separation of platinum(IV) from iron(III), cobalt(II), nickel(II) and copper(II), and is applicable to the analysis of synthetic mixtures and alloys. The method is fast, accurate and precise.