Electrochemical masking of large amounts of copper in dpasv and the determination of thallium in the presence of a large excess of copper

The influence of the following surfactants on the peak of copper in 0.2M EDTA at pH 4.5 was investigated: polyoxyethylated alkylphenols having an average of 3 and 9.5 ethylene oxide units; polyoxyethylene alcohols having 4 and 7 ethylene oxide units; poly(ethylene glycols) having M.W. 4000, 9000 and 20000; hexadecyltributylphosphonium bromide (HDTBPB), tetraphenylphosphonium bromide (TPPB),N,N,N,N,N',N',N-examethylhexamethylenediammonium bromide (HMB), benzyl(di-isobutylphenoxyethoxy) dimethylammonium chloride (Hyamine 1622), hexadecyltrimethylammonium bromide (HDTMAB), hexadecyldimethylbenzylammonium chloride (HDDMBAC) and tetrabutylammonium chloride (TBAC). HDDMBAC, as well as all the substances examined which contained an ethylene oxide chain, completely suppressed the copper peak. HDTBPB and TPPB partially suppressed the peak, whereas HDTMAB, HMB and Hyamine 1622 enhanced it. TBAC was without effect. In 0.2M EDTA at pH 4.5 containing TBAC at 0.01M concentration and 10 ppm of Rokafenol N-3, Cu(II), Pb(II) and Bi(III) can be tolerated at concentrations of up to 0.05M, the height of the thallium peak being unaffected. The precision of the determination (3–10%) and the recovery are satisfactory. A 10³-fold ratio of Fe(III) to Tl(I) does not interfere with the determination.     

Effect of surfactant adsorbed on encapsulation of fine inorganic powder with soapless emulsion polymerization

The encapsulation of fine inorganic powder was carried out with the soapless emulsion polymerization of methyl methacrylate in water in the presence of the powder, a layer of surfactant being adsorbed. The powder used was titanium dioxide. Surfactants added prior to the polymerization were sodium dodecyl sulfate, dodecyltrimethyl ammonium bromide, and polyoxyethylene sorbitan mono-oleate. The encapsulation state of the powder with polymer was closely related to the amount of surfactant adsorbed on the powder; and an amount of adsorption above a certain value was necessary for uniform encapsulation. Ionic surfactants were more useful than nonionic in the surfactants used, and could be adsorbed utilizing the electrostatic interaction between powder and the ionic end group. The combination of electric charges between the ionic end groups of surfactant and initiator was found to influence the molecular weight of capsulating polymer.     

稳态荧光探针研究Guerbet醇聚氧乙烯醚羧酸钠的聚集行为

以芘为荧光探针、二苯甲酮为猝灭剂,用稳态荧光探针法测定了合成的4种具有支链结构的Guerbet醇聚氧乙烯醚羧酸钠的临界胶束浓度和胶团的聚集数.结果表明,用稳态荧光探针法得到的临界胶束浓度(CMC)数值与表面张力法相差不大.结合临界胶束浓度、胶束微环境的极性和胶束聚集数的变化规律,推测了这类表面活性剂形成的胶束聚集体的结构形态.     

The Viscous Properties of Anionic/Cationic and Cationic/Nonionic Mixed Surfactant Systems

The behavior of mixed cationic/anionic and cationic/nonionic surfactants solutions have been studied by viscosimetry. The systems studied were sodium dodecyl sulfate (SDS)/cetyltrimethylammonium bromide (CTAB) and CTAB/Brij (polyoxyethylene lauryl ether, n = 10 and 23) in aqueous and sodium chloride solutions. The relative viscosity of single nonionic surfactant solutions is larger than that of SDS or CTAB solutions. It increases with the number of ethylene oxide groups. In the mixed systems, viscosity deviates from ideal behavior. The deviation results from electrostatic interactions. The surfactant mixture composition affects the self-assembled microstructure and rheology. A new mixed system that forms clear micellar solution above CMC was detected. In CTAB/Brij systems, the experimental data also deviate from ideal behavior due to mixed micelle formation and electroviscous effect. This effect is less pronounced than that of SDS/CTAB system and could be suppressed by adding an electrolyte (NaCl).     

Synthesis of amphiphilic copolymer brushes: Poly(ethylene oxide)‐graft‐polystyrene

A well‐defined amphiphilic copolymer brush with poly(ethylene oxide) as the main chain and polystyrene as the side chain was successfully prepared by a combination of anionic polymerization and atom transfer radical polymerization (ATRP). The glycidol was first protected by ethyl vinyl ether to form 2,3‐epoxypropyl‐1‐ethoxyethyl ether and then copolymerized with ethylene oxide by the initiation of a mixture of diphenylmethylpotassium and triethylene glycol to give the well‐defined polymer poly(ethylene oxide‐co‐2,3‐epoxypropyl‐1‐ethoxyethyl ether); the latter was hydrolyzed under acidic conditions, and then the recovered copolymer of ethylene oxide and glycidol {poly(ethylene oxide‐co‐glycidol) [poly(EO‐co‐Gly)]} with multiple pending hydroxymethyl groups was esterified with 2‐bromoisobutyryl bromide to produce the macro‐ATRP initiator [poly(EO‐co‐Gly)_(ATRP). The latter was used to initiate the polymerization of styrene to form the amphiphilic copolymer brushes. The object products and intermediates were characterized with ¹H NMR, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, Fourier transform infrared, and size exclusion chromatography in detail. In all cases, the molecular weight distribution of the copolymer brushes was rather narrow (weight‐average molecular weight/number‐average molecular weight < 1.2), and the linear dependence of ln[M₀]/[M] (where [M₀] is the initial monomer concentration and [M] is the monomer concentration at a certain time) on time demonstrated that the styrene polymerization was well controlled. This method has universal significance for the preparation of copolymer brushes with hydrophilic poly(ethylene oxide) as the main chain. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4361–4371, 2006     

Kinetics of the M-Intermediate in the Photocycle of Bacteriorhodopsin upon Chemical Modification with Surfactants

The spectroscopic and kinetic studies of the interaction between bacteriorhodopsin in the M-intermediate and several surfactants (cetyl trimethyl ammonium bromide, dodecyl trimethyl ammonium bromide, diethylene glycol mono-n-hexyl ether, ethylene glycol mono-n-hexyl ether, sodium 1-decanesulfonate and sodium 1-heptanesulfonate) have been investigated using steady-state UV–VIS spectrometry and time-resolved absorption techniques. The steady-state spectral results show that bR retains its trimeric state. Time-resolved observations indicate that the rate of deprotonation of the protonated Schiff base increases in the presence of the cationic surfactants, whereas insignificant changes are observed in the neutral or anionic surfactants. The rate of the reprotonation of the Schiff base in the transition M → N is accelerated in anionic and neutral surfactants, but is decelerated in the presence of the cationic surfactants. Surfactants with a longer hydrocarbon tail have a greater effect on the kinetics when compared with surfactants having shorter hydrocarbon tails. The opposite effect is observed when the hydrophilic head of the surfactants contains opposite charges. These distinct kinetics are discussed in terms of the difference in the modified surface hydrophilicity of the bR and the possible protein configurational changes upon surfactant treatments.     

Interaction between cationic, anionic, and non-ionic surfactants with ABA block copolymer Pluronic PE6200 and with BAB reverse block copolymer Pluronic 25R4

The interaction in aqueous solution between either the normal block copolymer poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide): Pluronic PE6200 [(EO)(11)-(PO)(28)-(EO)(11)], or the reverse block copolymer poly(propylene oxide)-poly(ethylene oxide)-poly(propylene oxide): Pluronic 25R4 [(PO)(19)-(EO)(33)-(PO)(19)] and the surfactants sodium decylsulfate, C(10)OS, decyltrimethyl ammonium bromide, C(10)TAB, and pentaethylene glycol monodecyl ether, C(10)E(5), was investigated and the aggregation behavior of these surfactants with Pluronics was compared. Surface tension measurements show that Pluronics in their non-aggregated state better interact with the anionic surfactant C(10)OS than with cationic and non-ionic ones. The presence of the two Pluronics induces the same lowering of the aggregation number of C(10)OS as shown by fluorescence quenching measurements. The number of polymer chains necessary to bind each C(10)OS aggregate has been estimated to be approximately 6 for PE6200 and approximately 2 for 25R4. Furthermore, this surfactant also induces the same increment in the gyration radius of the polymers as revealed by viscosimetry. Calorimetric results have been reasonably reproduced by applying a simple equilibrium model to the aggregation processes.     

Investigation of the micropolarity in reverse micelles of nonionic poly(ethylene oxide) surfactants using 4-nitropyridine-N-oxide as absorption probe

The micropolarities of the reverse micelle (RM) interior of nonionic poly(ethylene oxide) surfactants of the alkyl ether type (poly(ethylene oxide)[4] lauryl ether (C12E4, Brij 30)), alkyl-aryl ethers (poly(ethylene oxide)[4] nonylphenyl ether (C9PhiE4), poly(ethylene oxide)[5] nonylphenyl ether (C9PhiE5), and poly(ethylene oxide)[5] octylphenyl ether (C8PhiE5)), and poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers (Pluronics P123, F127) were investigated as a function of the water content by applying the absorption probe technique, using 4-nitropyridine-N-oxide (NP) as a probe. The change in the micellar aggregate micropolarity in different solvents (cyclohexane, decane, n-butanol, and n-butyl acetate) at various water contents has been investigated. The research was focused on the determination of the effects of surfactant structure and solvent type on the hydration degrees of the PEO chains in the region at the core limit, where the NP probe was located. All results regarding the polarities in RM and PEO/water calibration mixtures have been expressed in terms of Kosower's Z values, using the linear dependence of E(NP) on Kosower's Z. The PPO/butanol mixtures have also been used for RM in butanol as a reference system. The data revealed that local polarity in RM is dependent on the surfactant type, block copolymer composition, solvent nature, and water content. At the same water content, the results clearly indicate a lower hydration degree of triblock copolymers, as compared to the surfactants of the alkyl ether and alkyl-aryl ether type, but for P123 and F127 Pluronics in n-butanol the hydration is higher owing to the behavior of butanol as cosurfactant and to its hydration.     

Binding of hexadecylammonium surfactants to water-soluble neutral polymers

The binding of hexadecyltrimethylammonium bromide and hexadecyldimethyl-2-hydroxyethylammonium bromide to neutral polymers was measured by a potentiometric titration method using surfactant selective electrodes. Binding to poly(vinyl alcohol) was slightly cooperative, while that to poly(ethylene oxide) lacked the co-operativity. Poly(vinyl pyrrolidone) did not bind them at all. Binding affinity as estimated by a distribution coefficient of the cationic surfactants between the bulk and polymer phases is about 2 orders of magnitude smaller than that of anionic sodium dodecyl sulfate. The heat of binding was estimated from the temperature dependence of the distribution coefficient and found to be endothermic. It is imagined that the cationic surfactants are simply partitioned between the aqueous bulk phase and the polymer coil phase which is regarded as aqueous organic mixed solvent.     

Electromotive force study on interaction between a triblock copolymer and cationic surfactants in water

The interaction between a poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) triblock copolymer F127 and three cationic surfactants with varying alkyl chain length in water were investigated in detail by electromotive force (EMF) studies. The cationic surfactants investigated are hexadecyltrimethylammonium bromide (HTAB), myristytrimethylammonium bromide (MTAB), and lauryltrimethylammonium bromide (LTAB) which have carbon numbers of 16, 14, and 12 in the alkyl chain, respectively. Obvious binding was detected by EMF measurements between F127 and HTAB. For MTAB, the binding has also been detected with a weaker strength than that of HTAB. The LTAB/F127 mixed system exhibits the weakest binding, presumably due to the too short alkyl chain. This indicates that the binding between cationic surfactants and F127 is mainly dominated by the hydrophobic/hydrophobic interaction. In addition, the interaction also shows considerable dependence on the concentration of F127 and solution parameters such as the salinity.     

Preparation and evaluation of magnetic carbonaceous materials for pesticide and metal removal

When diluted solutions of giant micelles are under turbulent flow, large attenuations of the turbulence can be observed due to the action of the micelles on the dissipative vortices formed within the flow. This particular property is rapidly lost when the solution is heated due breakup of the giant micelles. Based on this property, we present a thermal-flow study of a mixed giant micelle formed by the combination of two surfactants and sodium salicylate. One of the surfactants, cetyltrimethylammonium bromide (C(16)TAB) was kept fixed, and the others were dodecyltrimethylammonium bromide (C(12)TAB), tetradecyltrimethylammonium bromide (C(14)TAB), octadecyltrimethylammonium bromide (C(18)TAB), polyoxyethylene (10) oleyl ether (Brij 97) or sodium dodecyl sulfate (SDS). Thermal diagrams for the combinations of the surfactants reveal deviations of the ideality. For the cationic surfactants, a synergistic effect was only observed when C(16)TAB was combined with the shorter surfactants.     

支链化甜菜碱和阳离子表面活性剂在聚甲基丙烯酸甲酯表面的吸附及其润湿性质

利用座滴法研究了两性离子表面活性剂支链十六烷基(聚氧乙烯)_n醚羟丙基羧酸甜菜碱(n = 0, 3)和阳离子表面活性剂支链十六烷基(聚氧乙烯)_n醚羟丙基季铵盐溶液在聚甲基丙烯酸甲酯(PMMA)表面上的润湿性质,考察了表面活性剂类型、结构及浓度对接触角的影响趋势。研究发现,表面活性剂浓度低于临界胶束浓度(cmc)时,分子通过氢键以平躺的方式吸附到PMMA界面,亲水基团靠近固体界面, PMMA表面被轻微疏水化;表面张力和粘附张力同时降低,导致此阶段接触角随浓度变化不大。浓度高于cmc时,表面活性剂通过疏水作用吸附,亲水基团在外, PMMA表面被明显亲水改性,接触角随浓度升高显著降低。由于具有相同的支链烷基,表面活性剂类型变化和聚氧乙烯基团的引入对接触角影响不大。     

Physicochemical properties of alcohol polyoxyethylene ether acetate/alkyl ethoxy polyglycoside surfactant mixtures

Alcohol polyoxyethylene ether acetates (AECs) containing 10 ethylene oxide (EO) groups and a fatty chain of C_16-18 mixed with alkyl ethoxy polyglycoside can incorporate the excellent properties compared to the individual surfactants, which can broaden the range of applications in daily chemical industry. The physicochemical properties of the mixed surfactant systems were investigated by surface tension, wetting, foaming, and emulsification measurements. The phase behavior of the mixed systems was also studied. Synergism was obtained in surface tension, wetting, and foaming ability.     

阳离子和两性表面活性剂在聚甲基丙烯酸甲酯表面的吸附行为

利用座滴法研究了阳离子表面活性剂十六烷基醚羟丙基季铵盐(C₁₆PC)、十六烷基聚氧乙烯醚羟丙基季铵盐(C₁₆(EO)₃PC)和两性离子表面活性剂十六烷基醚羟丙基羧酸甜菜碱(C₁₆PB)、十六烷基聚氧乙烯醚羟丙基羧酸甜菜碱(C₁₆(EO)₃PB)溶液在聚甲基丙烯酸甲酯(PMMA)表面上的润湿性质, 考察了表面活性剂类型及浓度对接触角的影响趋势. 研究发现: 低浓度条件下表面活性剂分子可能以平躺的方式吸附到固体界面, 且亲水基团靠近固体界面, PMMA表面被轻微疏水化; 在高浓度时则通过Lifshitz-van der Waals 作用吸附, 亲水基团在外, PMMA表面被亲水改性. 聚氧乙烯基团(EO基团)的引入对阳离子表面活性剂的接触角影响不大; 而含有聚氧乙烯基团的两性离子表面活性剂在PMMA界面上以类似半胶束的聚集体吸附, 大幅度降低接触角.     

Fluorometric and isothermal titration calorimetric studies on binding interaction of a telechelic polymer with sodium alkyl sulfates of varying chain length

Steady-state fluorescence measurements and isothermal titration calorimetric experiments have been performed to study the interaction between a telechelic polymer, pyrene-end-capped poly(ethylene oxide) (PYPY), and sodium alkyl sulfate surfactants having decyl, dodecyl, and tetradecyl hydrocarbon tails. Fluorometric results suggest polymer-surfactant interaction in the very low range of polymer concentrations. The relative variation in the excimer to monomer pyrene emission intensities with varying surfactant concentration reveals that initial addition of surfactant favors intramolecular preassociation until the surfactant molecules start binding with the ethylene oxide (EO) chain. With the growing number of surfactant aggregates along the EO chain, the association becomes hindered due to the polyelectrolyte effect. The results from microcalorimetric titrations in the low concentration range of PYPY solution (approximately 10(-6) M) with alkyl sulfates suggest two kinds of surfactant-polymer interactions, one with the polymer hydrophobic end groups and the other with the ethylene oxide backbone. The overall polymer-surfactant interaction starts at a much lower surfactant concentration for the hydrophobically modified polymers compared to that in the case of unsubstituted poly(ethylene oxide) homopolymer. From the experiments critical aggregation concentration values and the second critical concentration where free micelles start forming have been determined. An endeavor has been made to unveil the mechanism underlying the corresponding associations of the surfactants with the polymer.     

Mixed micelle formation and solubilization behavior toward polycyclic aromatic hydrocarbons of binary and ternary cationic-nonionic surfactant mixtures

Water solubility enhancements of polycyclic aromatic hydrocarbons (PAHs), viz., naphthalene, anthracene and pyrene, by micellar solutions at 25 degrees C using two series of surfactants, each involving two cationic and one nonionic surfactant in their single as well as equimolar binary and ternary mixed states, were measured and compared. The first series was composed of three surfactants, benzylhexadecyldimethylammonium chloride (C16BzCl), hexadecyltrimethylammonium bromide (C16Br), and polyoxyethylene(20)mono-n-hexadecyl ether (Brij-58) with a 16-carbon (C16) hydrophobic chain; the second series consisted of dodecyltrimethylammonium bromide (C12Br), dodecylethyldimethylammonium bromide (C12EBr), and polyoxyethylene(4)mono-n-dodecyl ether (Brij-30) with a 12-carbon (C12) chain. Solubilization capacity has been quantified in terms of the molar solubilization ratio, the micelle-water partition coefficient, the first stepwise association constant between solubilizate monomer and vacant micelle, and the average number of solubilizate molecules per micelle, determined employing spectrophoto-, tensio-, and flourimetric techniques. Cationic surfactants exhibited lesser solubilization capacity than nonionics in each series of surfactants with higher efficiency in the C16 series compared to the C12 series. Increase in hydrophobicity of head groups of cationics by incorporation of ethyl or benzyl groups enhanced their solubilization capacity. The mixing effect of surfactants on mixed micelle formation and solubilization efficiency has been discussed in light of the regular solution approximation (RSA). Cationic-nonionic binary combinations showed better solubilization capacity than pure cationics, nonionics, or cationic-cationic mixtures, which, in general, showed increase with increased hydrophobicity of PAHs. Equimolar cationic-cationic-nonionic ternary surfactant systems showed lower solubilization efficiency than their binary cationic-nonionic counterparts but higher than cationic-cationic ones. In addition, use of RSA has been extended, with fair success, to predict partition coefficients of ternary surfactant systems using data of binary surfactants systems. Mixed surfactants may improve the performance of surfactant-enhanced remediation of soils and sediments by decreasing the applied surfactant level and thus remediation cost.     

Micellization and synergistic interaction of binary surfactant mixtures based on sodium nonylphenol polyoxyethylene ether sulfate

Mixed micelle formation and synergistic interactions of binary surfactant combinations of sodium nonylphenol polyoxyethylene ether sulfate (NPES) with typical surfactants such as sodium dodecyl sulfate (SDS), Triton X-100 (TX100), cetyl trimethyl ammonium bromide (CTAB), and sodium bis(2-ethylhexyl) sulfosuccinate (AOT) at 25 degrees C in the presence of NaCl have been investigated. The critical micelle concentration of the binary mixtures has been quantitatively estimated by steady-state fluorescence measurements. The micellar characteristics such as composition, activity coefficients, and mutual interaction parameters have been estimated following different theoretical treatments. Investigation on the micellization and synergistic interaction of NPES with four kinds of surfactants showed that the behavior of the binary mixture deviated from the ideal state. The analysis revealed that the interaction parameter values (beta) varied with variation of solvent composition. Besides the strong electrostatic attraction between the oppositely charged surfactant NPES-CTAB mixture, the interaction between NPES and SDS also showed far more deviation from ideal behavior than that of TX100 and AOT. The reason for the synergism is also discussed and the results show that an ionic and a nonionic surfactant character existed concurrently in NPES due to the combination of a sulfate group and polyoxyethylene as a hydrophilic moiety. Zeta potential and diffusion coefficient measurements of micelles confirmed the synergistic interaction between the binary surfactants.     

Flow-injection chemiluminescence method for determination of critical micelle concentration of surfactants

In this study, chemiluminescence (CL) behaviour of Luminol-H₂O₂ in the presence of the different concentrations of four surfactants, cetyltrimethylammonium bromide (CTAB), cetylpyridinium bromide (CPB), sodium dodecyl sulphate (SDS) and polyoxyethylene dodecyl ether (Brij-35), was investigated. A novel method for the direct determination of critical micelle concentration (CMC) of the surfactants using flow-injection CL is described. Under the optimum conditions, the luminescence intensity of the Luminol-H₂O₂ system increased gradually with increasing concentration of the surfactants before the CMC, but rapidly reached to the emission maximum at the CMC, followed by a decrease after the CMC. The concentrations of the surfactants corresponding to the luminescence maximum are in agreement with the literature CMC values. The main factors affecting the determination of CMC are discussed. The mechanistic studies show that the luminescence peaks observed in the experiment were mainly because of the protective effect of the micelle against the transition of the excited species and the retarding effect of the micelle structures on the CL reaction rate.     

阿维菌素水乳剂的稳定性

首先将辛基酚聚氧乙烯醚(OP10)、苯乙烯基酚聚氧乙烯醚(602)和蓖麻油聚氧乙烯(40)醚(EL-40)分别与蓖麻油聚氧乙烯(20)醚(EL-20)复配制备阿维菌素水乳剂,从亲水亲油平衡(HLB)值、临界胶束浓度(cmc)、表面张力等方面分析了二元表面活性剂复配对乳液稳定性的影响;其次,在EL-40与EL-20复配基础上,将苯乙烯基酚聚氧乙烯聚氧丙烯醚(1601),嵌段共聚物(L64)和辛基酚聚氧乙烯醚磷酸酯(A)分别添加到乳液中,从粒径、表面张力和zeta电势等方面考察三元表面活性剂复配对乳液稳定性的影响.结果表明:EL-40与EL-20复配具有较低的表面张力,可制备较稳定的乳液.添加1601和L64对乳液稳定性有一定提高;而添加A大大提高了乳液的稳定性,这是由于A显著降低了液滴粒径和表面张力,增加了zeta电势.     

Surfactant/Nonionic polymer interaction. A NMR diffusometry and NMR electrophoretic investigation

The interaction between the nonionic polymer poly(ethylene oxide) (PEO) of molecular weight 20,000 and surfactants of various types [sodium dodecyl sulfate (SDS), dodecyl trimethylammonium bromide, octyl beta-D-glucoside, and potassium laurate] has been investigated in an aqueous solution at 25 degrees C by 1H NMR pulsed-gradient spin-echo self-diffusion techniques. The SDS/PEO study was further complemented by component-resolved 1H NMR-based studies of the electrophoretic mobility of PEO and the alkyl part of SDS under the same measurement conditions. Through such combined studies, a much more complete picture of the binding and aggregation processes becomes accessible.