Discrete Rh(III)/Fe(II) and Rh(III)/Fe(II)/Co(III) cyanide-bridged mixed valence compounds

The heterotrinuclear complexes trans- and cis-[{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+) are unprecedented examples of mixed valence complexes based on ferrocyanide bearing three different metal centers. These complexes have been assembled in a stepwise manner from their {trans-III-L(14S)Co(III)}, {cis-VI-L(15)Rh(III)}, and {Fe(II)(CN)(6)} building blocks. The preparative procedure follows that found for other known discrete assemblies of mixed valence dinuclear Cr(III)/Fe(II) and polynuclear Co(III)/Fe(II) complexes of the same family. A simple slow substitution process of [Fe(II)(CN)(6)](4-) on inert cis-VI-[Rh(III)L(15)(OH)](2+) leads to the preparation of the new dinuclear mixed valence complex [{cis-VI-L(15)Rh(III)(μ-NC)}Fe(II)(CN)(5)](-) with a redox reactivity that parallels that found for dinuclear complexes from the same family. The combination of this dinuclear precursor with mononuclear trans-III-[Co(III)L(14S)Cl](2+) enables a redox-assisted substitution on the transient {L(14S)Co(II)} unit to form [{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+). The structure of the final cis-[{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+) complex has been established via X-ray diffraction and fully agrees with its solution spectroscopy and electrochemistry data. The new species [{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+) and [{cis-VI-L(15)Rh(III)(μ-NC)}Fe(II)(CN)(5)](-) show the expected electronic spectra and electrochemical features typical of Class II mixed valence complexes. Interestingly, in the trinuclear complex, these features appear to be a simple addition of those for the Rh(III)/Fe(II) and Co(III)/Fe(II) moieties, despite the vast differences existent in the electronic spectra and electrochemical properties of the two isolated units.     

Amperometric sensor for hydrogen peroxide, based on Cu2O or CuO modified carbon paste electrodes

Carbon paste electrodes, modified by Cu₂O or CuO, were prepared and tested as sensors for hydrogen peroxide in aqueous solutions. They show a cathodic response to the analyte ranging from 0.45 to 0.14 mA/cm² for 1 mmol/L hydrogen peroxide for solutions of pH 5.2 and 7.3, respectively, at a working potential of –0.4 V vs. Ag/AgCl. The cathodic operation mode used diminishes or excludes the possibility of anodic discharge of contaminants usually present in biological fluids, and enables the use of the sensors in bioanalytical systems based on enzymes. Received: 18 April 1997 / Accepted: 24 June 1997     

Amperometric sensor for hydrogen peroxide, based on Cu2O or CuO modified carbon paste electrodes

Carbon paste electrodes, modified by Cu₂O or CuO, were prepared and tested as sensors for hydrogen peroxide in aqueous solutions. They show a cathodic response to the analyte ranging from 0.45 to 0.14 mA/cm² for 1 mmol/L hydrogen peroxide for solutions of pH 5.2 and 7.3, respectively, at a working potential of –0.4 V vs. Ag/AgCl. The cathodic operation mode used diminishes or excludes the possibility of anodic discharge of contaminants usually present in biological fluids, and enables the use of the sensors in bioanalytical systems based on enzymes.     

Cu(I) and Fe(II) complexes with N,N-dimethylthioformamide and Fe(II) complexes with N,N-dimethylformamide

The synthesis of the following Cu(I) and Fe(II) complexes with N,N-dimethylthioformamide (DMTF) and N,N-dimethylformamide (DMF) are described: Cu(DMTF)₄ClO₄, Cu(DMTF)₂Cl, Cu(DMTF)₂Br, Cu(DMTF)₂I, Fe(DMTF)₆(ClO₄)₂, Fe(DMTF)₂Cl₂, Fe(DMTF)₂Br₂, Fe(DMTF)₂I₂, Fe(DMF)₆(ClO₄)₂, Fe(DMF)₂Cl₂, Fe(DMF)Br₂ and Fe(DMF)₃I₂. Electronic absorption spectra, IR spectra, magnetic susceptibilities of the solids and in solution as well as conductivities have been measured of these compounds in order to obtain information on the nature of the interaction between the cations and the ligands, the coordination in the crystalline state, in solution and the dissociation of these compounds in the respective solvents.     

Titration curves in complexometric titrations with the redox system Fe(III)/Fe(II)

Potentiometric titrations of metal ions with EDTA have been carried out with a platinum or graphite electrode and the Fe(III)/Fe(II) redox system. In the absence of oxygen and for pH < 2 the titration curves may be described by an equation similar to that given previously for titrations with silver and mercury electrodes. Titration curves for bismuth and indium, which are more strongly complexed than iron, are asymmetrical and useful for analytical purposes. When the titrated ions are complexed less strongly than iron(III) ions the kinetics of metal complexation have a pronounced effect. The titration curves of thorium and copper, which react more rapidly than iron, are analytically useful. The curves recorded rapidly after titrant additions have a better end-point break than those which correspond to thermodynamic equilibrium. When a metal, e.g., nickel, is weakly bound by EDTA, and reacts more slowly than iron, a very small end-point break or none at all is observed.     

The reactions of isotopically labeled N15NO+ with CO,NO, O2, N2, NO2, and N2O

The reactions of labeled N¹⁵NO⁺ with CO, NO, O₂, ¹⁸O₂, N₂, NO₂, and N₂O have been investigated using a tandem ICR instrument. In each case the total rate coefficient, product distribution, and kinetic energy dependence were measured. The results indicate that very specific reaction mechanisms govern these reactions. This conclusion is suggested by the lack of isotopic scrambling in many cases and by the complete absence of energetically allowed products in almost all of the systems. The kinetic energy studies indicate that most of the reaction channels proceed through an intermediate complex at low energies and via a direct mechanism at higher kinetic energies. Such direct mechanisms include long range charge transfer and atom or ion transfer.     

Crystal structure and heat capacity of the mixed-valence trinuclear iron monoiodoacetate complex, [Fe(III)2Fe(II)O(O2CCH2I)6(H2O)3][Fe(III)3O(O2CCH2I)6(H2O)3]I

The crystal structure of a trinuclear iron monoiodoacetate complex was determined. Although it has been incorrectly characterized as [Fe₃O(O₂CCH₂I)₆(H₂O)₃], the correct chemical formula turned out to be [Fe(III)₂Fe(II)O(O₂CCH₂I)₆(H₂O)₃]-[Fe(III)₃O(O₂CCH₂I)₆(H₂O)₃]I (1). The two kinds of Fe₃O molecules (Fe(III)₂Fe(II)O and Fe(III)₃O) are crystallographically indistinguishable. All the Fe atoms are crystallographically equivalent because of a crystallographic threefold symmetry. Heat capacities of 1 seem to exhibit no thermal anomaly in the temperature range 5.5–309 K, although the valence detrapping phenomenon has been observed in this temperature range. This fact indicates that the valence-detrapping phenomenon in 1 occurs without any phase transition, leading 1 to a glassy state, probably because the crystal of 1 is just like a solid solution of distorted mixed-valence Fe(III)₂Fe(II)O molecules and permanently undistorted Fe(III)₃O molecules which may act as an inhibitor for a cooperative valence-trapping.     

Concatenation of two molecular switches via a Fe(II)/Fe(III) couple

[reaction: see text] Modulation of the fluorescein fluorescence in the presence of spiropyran and ferric ion by light was observed. Such fluorescence modulation was due to the low oxidation potential of complex MC.Fe(2+), which made the electron transfer from MC.Fe(2+) to Flu(+)()(*)() thermodynamically favorable. As a result, the communication between two molecular switches based on fluorescein and spiropyan, respectively, was realized via the reversible Fe(III)/Fe(II) redox couple. The communicating behavior corresponds well to the function of an INHIBIT logic gate.     

Disproportionation reaction of NO2/N2O4 with a Ru(II) porphyrin

A Ru(II) porphyrin rapidly reacts with NO2/N2O4 with the formation of a stable Ru(II) nitrosyl nitrato complex.     

Thermal Decomposition of CF3C(O)O2NO2, CClF2C(O)O2NO2, CCl2FC(O)O2NO2, and CCl3C(O)O2NO2

Haloacetyl, peroxynitrates are intermediates in the atmospheric degradation of a number of haloethanes. In this work, thermal decomposition rate constants of CF₃C(O)O₂NO₂, CClF₂C(O)O₂NO₂, CCl₂FC(O)O₂NO₂, and CCl₃C(O)O₂NO₂ have been determined in a temperature controlled 420 l reaction chamber. Peroxynitrates (RO₂NO₂) were prepared in situ by photolysis of RH/Cl₂/O₂/NO₂/N₂ mixtures (R = CF₃CO, CClF₂CO, CCl₂FCO, and CCl₃CO). Thermal decomposition was initiated by addition of NO, and relative RO₂NO₂ concentrations were measured as a function of time by long-path IR absorption using an FTIR spectrometer. First-order decomposition rate constants were determined at atmospheric pressure (M = N₂) as a function of temperature and, in the case of CF₃C(O)O₂NO₂ and CCl₃C(O)O₂NO₂, also as a function of total pressure. Extrapolation of the measured rate constants to the temperatures and pressures of the upper troposphere yields thermal lifetimes of several thousands of years for all of these peroxynitrates. Thus, the chloro(fluoro)acetyl peroxynitrates may play a role as temporary reservoirs of Cl, their lifetimes in the upper troposphere being limited by their (unknown) photolysis rates. Results on the thermal decomposition of CClF₂CH₂O₂NO₂ and CCl₂FCH₂O₂NO₂ are also reported, showing that the atmospheric lifetimes of these peroxynitrates are very short in the lower troposphere and increase to a maximum of several days close to the tropopause. The ratio of the rate constants for the reactions of CF₃C(O)O₂ radicals with NO₂ and NO was determined to be 0.64 ± 0.13 (2σ) at 315 K and a total pressure of 1000 mbar (M = N₂). © 1994 John Wiley & Sons, Inc.     

Bismercaptoethanediazacyclooctane as a N2S2 chelating agent and Cys-X-Cys mimic for Fe(NO) and Fe(NO)2

The N-protonated bismercaptoethanediazacyclooctane serves as a bidentate dithiolate ligand to oxidized Fe(NO)(2) of Enemark-Feltam notation, E-F [Fe(NO)(2)],(9) mimicking Cys-X-Cys binding of Fe(NO)(2) to proteins or thio-biomolecules. The neutral compound is characterized by the well-known g = 2.03 EPR signal which is a hallmark of dinitrosyl iron complexes, DNIC's. The Fe(NO)(2) unit can be removed from the chelate by excess PhS(-), producing (PhS)(2)Fe(NO)(2)(-). Transfer of NO from Fe(H(+)bme-daco)(NO)(2) (nu(NO) = 1740, 1696 cm(-)(1)) to Fe(II) of [(bme-daco)Fe](2) yields the five-coordinate, square-pyramidal N(2)S(2)Fe(NO) (nu(NO) = 1649 cm(-)(1)), where NO is in the apical position. Its isotropic EPR signal at g = 2.05 is consistent with E-F [Fe(NO)](7) formulation. In excess NO, Roussin's red ester-type molecules are formed as dinuclear or tetranuclear species, [(micro-SRS)[Fe(2)(NO)(4)]](n)() (n =1, 2). These well-characterized molecules furnish reference points for positions and patterns in nu(NO) vibrational spectroscopy expected to be useful for in vivo studies of NO degradation of iron-sulfur clusters in ferredoxins.     

Ab initio calculations of nitrogen oxide reactions: formation of N2O2, N2O3, N2O4, N2O5, and N4O2 from NO, NO2, NO3, and N2O

Ab initio computational methods were used to obtain Delta(r)H(o), Delta(r)G(o), and Delta(r)S(o) for the reactions 2 NO <=> N(2)O(2) (I), NO+NO(2) <=> N(2)O(3) (II), 2 NO(2) <=> N(2)O(4) (III), NO(2)+NO(3) <=> N(2)O(5) (IV), and 2 N(2)O <=> N(4)O(2) (V) at 298.15 K. Optimized geometries and frequencies were obtained at the CCSD(T) level for all molecules except for NO, NO(2), and NO(3), for which UCCSD(T) was used. In all cases the aug-cc-pVDZ (avdz) basis set was employed. The electronic energies of all species were obtained from complete basis set extrapolations (to aug-cc-pV5Z) using five different extrapolation methods. The [U]CCSD(T)/avdz geometries and frequencies of the N(x)O(y) compounds are compared with literature values, and problems associated with the values and assignments of low-frequency modes are discussed. The standard entropies are compared with values cited in the NIST/JANAF tables [NIST-JANAF Thermochemical Tables, J. Phys. Chem. Ref. Data Monograph No. 9, 4th ed. edited by M. W. Chase, Jr. (American Chemical Society and American Institute of Physics, Woodbury, NY, 1988)]. With the exception of I, in which the dimer is weakly bound, and V, for which thermodynamic data appears to be lacking, the calculated standard thermodynamic functions of reaction are in good agreement with literature values obtained both from statistical mechanical and various equilibrium methods. A multireference-configuration interaction calculation (MRCI+Q) for I provides a D(e) value that is consistent with previous calculations. The combined uncertainties of the NIST/JANAF values for Delta(r)H(o), Delta(r)G(o), and Delta(r)S(o) of II, III, and IV are discussed. The potential surface for the dissociation of N(2)O(4) was explored using multireference methods. No evidence of a barrier to dissociation was found.     

Influence of freezing of aqueous samples on the Fe(II)/Fe(III) equilibrium

The influence of freezing of aqueous samples on the Fe(II)/Fe(III) equilibrium has been investigated by ion chromatography. No change has been observed in the pH-range 2–5, irrespective of the freezing temperature.     

Structural and magnetic investigations of the mixed-valence Fe(II,III) two-dimensional layer complex, [Fe2(II) Fe2(III)(HCOO)10(C6H7N)6]n.

The structure of the complex, [Fe2(II)Fe2(III)(HCOO)10(C6H7N6)n, (1) exhibits a neutral two-dimensional layer network of alternating iron(II) and iron(III) ions, bridged equatorially by formate groups. All iron atoms are octahedrally coordinated, with iron(III) coordinating axially to one gamma-picoline and one formate group, while the iron(II) centers interact axially with two gamma-picoline groups, above and below the layer plane. The complex crystallizes in the triclinic space group P1 at all studied temperatures [at 120 K, the cell dimensions are: a = 10.228(1), b = 12.071(1), c = 12.072(1) A, alpha = 89.801(2), beta = 71.149(2), gamma = 73.371(2) degrees]. An intralayer antiferromagnetic exchange interaction of J = -2.8 cm(-1) between iron(II) and iron(III) was observed in the magnetic studies. Decreasing the temperature to close to 20 K causes a magnetic-ordering phenomenon to occur and a low-temperature phase with a long-range antiferromagnetic spin orientation appears. The magnetic phase transition was confirmed by M?ssbauer spectroscopic studies at temperatures above and below the critical temperature. Structural information of 1 from synchrotron X-ray diffraction data collected at room temperature and 16 K suggests that the antiferromagnetic ordering is caused by an enhanced pi-pi interaction between chi-picoline groups from adjacent layers.     

Computerized flow constant-current stripping analysis for nickel(II) and cobalt(II) with carbon fibre and modified carbon fibre electrodes

Nickel (II) and cobalt (II) are determined by constant-current stripping analysis, with mercury- coated carbon fibre electrodes, in non-deoxygenated solutions after potentiostatic adsorptive accumulation of their dimethylglyoxime complexes. By adding several stripping scans, each obtained after a short period of potentiostatic deposition, instead of a single scan obtained after the same total time of potentiostatic adsorption, the linear range between the analytical signal and the analyte concentration can be extended. By using pulsed-potential procedures for adsorptive accumulation, cobalt (II) can be determined in the presence of a larger amount of nickel (II) and vice versa. Carbon fibre electrodes were modified by sucking ethanolic solutions of either dimethylglyoxime (of Nafion and dimethylglyoxime) through the electrodes; Nafion did not affect the general behaviour of this electrode. The background of the modified electrodes was lower than that of the unmodified electrodes. The accuracy of the method was confirmed by analysis of sea- water reference samples. The detection limit for nickel (II) was about 40 ng l^?1 for a total potentiostatic deposition time of 100 s (5×20 s); the reagent blank was about 150 ng l^?1 under these conditions.     

Quenching of I(2P1/2) by NO2, N2O4, and N2O

Quenching of excited iodine atoms (I(5p5, 2P1/2)) by nitrogen oxides are processes of relevance to discharge-driven oxygen iodine lasers. Rate constants at ambient and elevated temperatures (293-380 K) for quenching of I(2P1/2) atoms by NO2, N2O4, and N2O have been measured using time-resolved I(2P1/2) --> I(2P3/2) 1315 nm emission. The excited atoms were generated by pulsed laser photodissociation of CF3I at 248 nm. The rate constants for I(2P1/2) quenching by NO2 and N2O were found to be independent of temperature over the range examined with average values of (2.9 +/- 0.3) x 10(-15) and (1.4 +/- 0.1) x 10(-15) cm3 s(-1), respectively. The rate constant for quenching of I(2P1/2) by N2O4 was found to be (3.5 +/- 0.5) x 10(-13) cm3 s(-1) at ambient temperature.     

Mechanism of superoxide dismutase-like activity of Fe(II) and Fe(III) complexes of tetrakis-N,N,N',N'(2-pyridylmethyl)ethylenediamine

The superoxide dismutase (SOD) activity of iron(II) tetrakis-N,N,N',N'(2-pyridylmethyl)ethylenediamine complex (Fe-TPEN) was reexamined using a pulse radiolysis method. In our previous study (J. Biol. Chem., 264, 9243-9249 (1989)), we reported that this complex has a potent SOD activity in a cyt. c (cytochrome c)-based system (IC50 = 0.8 microM) and protects E. coli cells against paraquat toxicity. The present pulse radiolysis experiment revealed that Fe(II)TPEN reacts stoichiometrically with superoxide to form Fe(III)TPEN with a second-order rate constant of 3.9 x 10(6) M-1 S-1 at pH 7.1, but superoxide did not reduce Fe(III)TPEN to Fe(II)TPEN. The reaction of Fe(III)TPEN and superoxide was biphasic. In the fast reaction, an adduct (Fe(III)TPEN-superoxide complex) was formed at the second-order rate constant of 8.5 x 10(5) M-1 S-1 at pH 7.4. In the slow one, the adduct reacted with another molecule of the adduct, regenerating Fe(III)TPEN. In the cyt. c method with catalase, this Fe(III)TPEN-superoxide complex showed cyt. c oxidation activity, which had led to overestimation of its SOD activity. Based on the titration data, the main species of complex in aqueous media at neutral pH was indicated to be Fe(III)TPEN(OH-). A spectral change after the reduction with hydrated electron indicates that the OH- ion coordinates directly to Fe(III) by displacing one of the pyridine rings. The X-ray analysis of [Fe(II)TPEN]SO4 supported this structure. From the above results we propose a novel reaction mechanism of FeTPEN and superoxide which resembles a proton catalyzed dismuting process, involving Fe(III)TPEN-superoxide complex.