Using effusive molecular beams and microcanonical unimolecular rate theory to characterize CH4 dissociation on Pt(111)

The dissociative sticking coefficient for CH4 on Pt(111) has been measured as a function of both gas temperature (Tg) and surface temperature (Ts) using effusive molecular beam and angle-integrated ambient gas dosing methods. The experimental results are used to optimize the three parameters of a microcanonical unimolecular rate theory (MURT) model of the reactive system. The MURT calculations allow us to extract transition state properties from the data as well as to compare our data directly to other molecular beam and thermal equilibrium sticking measurements. We find a threshold energy for dissociation of E0 = 52.5 +/- 3.5 kJ mol(-1). Furthermore, the MURT with an optimized parameter set provides for a predictive understanding of the kinetics of this C-H bond activation reaction, that is, it allows us to predict the dissociative sticking coefficient of CH4 on Pt(111) for any combination of Ts and Tg even if the two are not equal to one another, indeed, the distribution of molecular energy need not even be thermal. Comparison of our results to those from recent thermal equilibrium catalysis studies on CH4 reforming over Pt nanoclusters ( approximately 2 nm diam) dispersed on oxide substrates indicates that the reactivity of Pt(111) exceeds that of the Pt nanocatalysts by several orders of magnitude.     

Dynamically biased RRKM model of activated gas-surface reactivity: vibrational efficacy and rotation as a spectator in the dissociative chemisorption of CH4 on Pt(111)

The reactivity of CH(4) impinging on a Pt(111) surface was examined using a precursor-mediated microcanonical trapping model of dissociative chemisorption wherein the effects of rotational and vibrational energy could be explored. Dissociative sticking coefficients for a diverse range of non-equilibrium effusive beam, supersonic beam, and eigenstate-resolved experiments were simulated and an average relative discrepancy between theory and experiment of better than 50% was achieved by treating molecular rotations and translation parallel to the surface as spectator degrees of freedom, and introducing a dynamically-biased vibrational efficacy. The model parameters are {E(0) = 57.9 kJ mol(-1), s = 2, η(v) = 0.40} where E(0) is the apparent threshold energy for reaction, s is the number of surface oscillators participating in energy exchange within each gas-surface collision complex formed, and η(v) is the mean vibrational efficacy for reaction relative to normal translational energy which figures in the assembly of the active exchangeable energy which is available to surmount the activation barrier to dissociative chemisorption. GGA-DFT electronic structure calculations provided vibrational frequencies for the transition state for dissociative chemisorption. The asymmetry of the rotational state populations in supersonic and effusive molecular beam experiments allowed kinetic analysis to establish that taking rotation as a spectator degree of freedom is a good approximation. Surface phonons, rather than the incident molecules, are calculated to play the dominant role in supplying the energy required to overcome the activation barrier for dissociative chemisorption under the thermal equilibrium conditions relevant to high pressure catalysis. Over the temperature range 300 K ≤T≤ 1000 K, the thermal dissociative sticking coefficient is predicted to be well described by S(T) = S(0) exp(-E(a)/RT) where S(0) = 0.62 and E(a) = 62.6 kJ mol(-1).     

Microcanonical unimolecular rate theory at surfaces. II. Vibrational state resolved dissociative chemisorption of methane on Ni(100)

A three-parameter microcanonical theory of gas-surface reactivity is used to investigate the dissociative chemisorption of methane impinging on a Ni(100) surface. Assuming an apparent threshold energy for dissociative chemisorption of E(0)=65 kJ/mol, contributions to the dissociative sticking coefficient from individual methane vibrational states are calculated: (i) as a function of molecular translational energy to model nonequilibrium molecular beam experiments and (ii) as a function of temperature to model thermal equilibrium mbar pressure bulb experiments. Under fairly typical molecular beam conditions (e.g., E(t)>/=25 kJ mol(-1), T(s)>/=475 K, T(n)/=100 K the dissociative sticking is dominated by methane in vibrationally excited states, particularly those involving excitation of the nu(4) bending mode. Fractional energy uptakes f(j) defined as the fraction of the mean energy of the reacting gas-surface collision complexes that derives from specific degrees of freedom of the reactants (i.e., molecular translation, rotation, vibration, and surface) are calculated for thermal dissociative chemisorption. At 500 K, the fractional energy uptakes are calculated to be f(t)=14%, f(r)=21%, f(v)=40%, and f(s)=25%. Over the temperature range from 500 K to 1500 K relevant to thermal catalysis, the incident gas-phase molecules supply the preponderance of energy used to surmount the barrier to dissociative chemisorption, f(g)=f(t)+f(r)+f(v) approximately 75%, with the highest energy uptake always coming from the molecular vibrational degrees of freedom. The predictions of the statistical, mode-nonspecific microcanonical theory are compared to those of other dynamical theories and to recent experimental data.     

Microcanonical transition state theory for activated gas-surface reaction dynamics: application to H2/CU(111) with rotation as a spectator

A microcanonical unimolecular rate theory (MURT) model incorporating quantized surface vibrations and Rice-Ramsperger-Kassel-Marcus rate constants is applied to a benchmark system for gas-surface reaction dynamics, the activated dissociative chemisorption and associative desorption of hydrogen on Cu(111). Both molecular translation parallel to the surface and rotation are treated as spectator degrees of freedom. MURT analysis of diverse experiments indicates that one surface oscillator participates in the dissociative transition state and that the threshold energy for H2 dissociation on Cu(111) is E0 = 62 kJ/mol. The spectator approximation for rotation holds well at thermally accessible rotational energies (i.e., for Er less than approximately 40 kJ/mol). Over the temperature range from 300 to 1000 K, the calculated thermal dissociative sticking coefficient is ST = S0 exp(-Ea/kBT) where S0 = 1.57 and Ea = 62.9 kJ/mol. The sigmoid shape of rovibrational eigenstate-resolved dissociative sticking coefficients as a function of normal translational energy is shown to derive from an averaging of the microcanonical sticking coefficient, with threshold energy E0, over the thermal surface oscillator distribution of the gas-surface collision complexes. Given that H2/Cu(111) is one of the most dynamically biased of gas-surface reactive systems, the simple statistical MURT model simulates and broadly rationalizes the H2/Cu(111) reactive behavior with remarkable fidelity.     

Effusive molecular beam study of C2H6 dissociation on Pt(111)

The dissociative sticking coefficient for C2H6 on Pt(111) has been measured as a function of both gas temperature (Tg) and surface temperature (Ts) using effusive molecular beam and angle-integrated ambient gas dosing methods. A microcanonical unimolecular rate theory (MURT) model of the reactive system is used to extract transition state properties from the data as well as to compare our data directly with supersonic molecular beam and thermal equilibrium sticking measurements. We report for the first time the threshold energy for dissociation, E0 = 26.5 +/- 3 kJ mol(-1). This value is only weakly dependent on the other two parameters of the model. A strong surface temperature dependence in the initial sticking coefficient is observed; however, the relatively weak dependence on gas temperature indicates some combination of the following (i) not all molecular excitations are contributing equally to the enhancement of sticking, (ii) that strong entropic effects in the dissociative transition state are leading to unusually high vibrational frequencies in the transition state, and (iii) energy transfer from gas-phase rovibrational modes to the surface is surprisingly efficient. In other words, it appears that vibrational mode-specific behavior and/or molecular rotations may play stronger roles in the dissociative adsorption of C2H6 than they do for CH4. The MURT with an optimized parameter set provides for a predictive understanding of the kinetics of this C-H bond activation reaction, that is, it allows us to predict the dissociative sticking coefficient of C2H6 on Pt(111) for any combination of Ts and Tg even if the two are not equal to one another.     

Nonequilibrium activated dissociative chemisorption: SiH4 on Si(100)

A three-parameter local hot spot model of gas-surface reactivity is employed to analyze and predict dissociative sticking coefficients for SiH4 incident on Si(100) under varied nonequilibrium conditions. Two Si surface oscillators and the molecular vibrations, rotations, and translational energy directed along the local surface normal are active degrees of freedom in the 15 dimensional microcanonical kinetics. The threshold energy for SiH4 dissociative chemisorption is found to be 19 kJ/mol, in quantitative agreement with recent GGA-DFT calculations. A simple scheme for increasing the rate of chemical vapor deposition of silicon from SiH4 at low surface temperatures is modeled.     

State-resolved reactivity of CH4(2nu3) on Pt(111) and Ni(111): effects of barrier height and transition state location

Quantum state-resolved sticking coefficients on Pt(111) and Ni(111) surfaces have been measured for CH4 excited to the first overtone of the antisymmetric C-H stretch (2nu3) at well-defined kinetic energies in the range of 10-90 kJ/mol. The ground-state reactivity of CH4 is approximately 3 orders of magnitude lower on Ni(111) than on Pt(111) for kinetic energies in the range of 10-64 kJ/mol, reflecting a difference in barrier height of 28+/-6 kJ/mol. 2nu3 excitation of CH4 increases its reactivity by more than 4 orders of magnitude on Ni(111), whereas on Pt(111) the reactivity increase is lower by 2 orders of magnitude. We discuss the observed differences in the state-resolved reactivity for the ground state and 2nu3 excited state of methane in terms of a difference in barrier height and transition state location for the dissociation reaction on the two metal surfaces.     

Communication: angle-resolved thermal dissociative sticking of CH4 on Pt(111): further indication that rotation is a spectator to the gas-surface reaction dynamics

Effusive molecular beam measurements of angle-resolved thermal dissociative sticking coefficients for CH(4) impinging on a Pt(111) surface, at a temperature of 700 K, are reported and compared to theoretical predictions. The reactivity falls off steeply as the molecular angle of incidence increases away from the surface normal. Successful modeling of the thermal dissociative sticking behavior, consistent with existent CH(4) supersonic molecular beam experiments involving rotationally cold molecules, required that rotation be treated as a spectator degree of freedom.     

On the dynamics of H2 adsorption on the Pt(111) surface

The dynamics and kinetics of the dissociation of hydrogen over the hexagonal close packed platinum (Pt(111)) surface are investigated using Car–Parrinello molecular dynamics and static density functional theory calculations of the potential energy surfaces. The calculations model the reference energy‐resolved molecular beam experiments, considering the degrees of freedom of the catalytic surface. Two‐dimensional potential energy surfaces above the main sites on Pt(111) are determined. Combined with Car–Parrinello trajectories, they confirm the dissociative adsorption of H₂ as the only adsorption pathway on this surface at H₂ incindence energies above 5 kJ/mol. A direct determination of energy‐resolved sticking coefficients from molecular dynamics is also performed, showing an excellent agreement with the experimental data at incidence energies in the 5–30 kJ/mol range. Application of dispersion corrections does not lead to an improvement in the prediction of the H₂ sticking coefficient. The adsorption reaction rate obtained from the calculated sticking coefficients is consistent with experimentally derived literature values.     

Microcanonical unimolecular rate theory at surfaces. III. Thermal dissociative chemisorption of methane on Pt(111) and detailed balance

A local hot spot model of gas-surface reactivity is used to investigate the state-resolved dynamics of methane dissociative chemisorption on Pt(111) under thermal equilibrium conditions. Three Pt surface oscillators, and the molecular vibrations, rotations, and the translational energy directed along the surface normal are treated as active degrees of freedom in the 16-dimensional microcanonical kinetics. Several energy transfer models for coupling a local hot spot to the surrounding substrate are developed and evaluated within the context of a master equation kinetics approach. Bounds on the thermal dissociative sticking coefficient based on limiting energy transfer models are derived. The three-parameter physisorbed complex microcanonical unimolecular rate theory (PC-MURT) is shown to closely approximate the thermal sticking under any realistic energy transfer model. Assuming an apparent threshold energy for CH(4) dissociative chemisorption of E(0)=0.61 eV on clean Pt(111), the PC-MURT is used to predict angle-resolved yield, translational, vibrational, and rotational distributions for the reactive methane flux at thermal equilibrium at 500 K. By detailed balance, these same distributions should be observed for the methane product from methyl radical hydrogenation at 500 K in the zero coverage limit if the methyl radicals are not subject to side reactions. Given that methyl radical hydrogenation can only be experimentally observed when the CH(3) radicals are kinetically stabilized against decomposition by coadsorbed H, the PC-MURT was used to evaluate E(0) in the high coverage limit. A high coverage value of E(0)=2.3 eV adequately reproduced the experimentally observed methane angular and translational energy distributions from thermal hydrogenation of methyl radicals. Although rigorous application of detailed balance arguments to this reactive system cannot be made because thermal decomposition of the methyl radicals competes with hydrogenation, approximate applicability of detailed balance would argue for a strong coverage dependence of E(0) with H coverage--a dependence not seen for methyl radical hydrogenation on Ru(0001), but not yet experimentally explored on Pt(111).     

Adsorption dynamics of water on Pt{110}-(1 x 2)

The dynamics of H(2)O adsorption on Pt{110}-(1 x 2) is studied using supersonic molecular beam and temperature programed desorption techniques. The sticking probabilities are measured using the King and Wells method at a surface temperature of 165 K. The absolute initial sticking probability s(0) of H(2)O is 0.54+/-0.03 for an incident kinetic energy of 27 kJmol. However, an unusual molecular beam flux dependence on s(0) is also found. At low water coverage (theta<1), the sticking probability is independent of coverage due either to diffusion in an extrinsic precursor state formed above bilayer islands or to incorporation into the islands. We define theta=1 as the water coverage when the dissociative sticking probability of D(2) on a surface predosed with water has dropped to zero. The slow falling H(2)O sticking probability at theta>1 results from compression of the bilayer and the formation of multilayers. Temperature programed desorption of water shows fractional order kinetics consistent with hydrogen-bonded islands on the surface. A remarkable dependence of the initial sticking probability on the translational (1-27 kJ/mol) and internal energies of water is observed: s(0) is found to be essentially a step function of translational energy, increasing fivefold at a threshold energy of 5 kJ/mol. The threshold migrates to higher energies with increasing nozzle temperature (300-700 K). We conclude that both rotational state and rotational alignment of the water molecules in the seeded supersonic expansion are implicated in dictating the adsorption process.     

Alignment dependent chemisorption of vibrationally excited CH4(ν3) on Ni(100), Ni(110), and Ni(111)

We present a stereodynamics study of the dissociative chemisorption of vibrationally excited methane on the (100), (110), and (111) planes of a nickel single crystal surface. Using linearly polarized infrared excitation of the antisymmetric C-H stretch normal mode vibration (ν(3)), we aligned the angular momentum and C-H stretch amplitude of CH(4)(ν(3)) in the laboratory frame and measured the alignment dependence of state-resolved reactivity of CH(4) for the ν(3) = 1, J = 0-3 quantum states over a range of incident translational energies. For all three surfaces studied, in-plane alignment of the C-H stretch results in the highest dissociation probability and alignment along the surface normal in the lowest reactivity. The largest alignment contrast between the maximum and minimum reactivity is observed for Ni(110), which has its surface atoms arranged in close-packed rows separated by one layer deep troughs. For Ni(110), we also probed for alignment effects relative to the direction of the Ni rows. In-plane C-H stretch alignment perpendicular to the surface rows results in higher reactivity than parallel to the surface rows. The alignment effects on Ni(110) and Ni(100) are independent of incident translational energy between 10 and 50 kJ/mol. Quantum state-resolved reaction probabilities are reported for CH(4)(ν(3)) on Ni(110) for translational energies between 10 and 50 kJ/mol.     

平动能对激光诱导气-固表面蚀刻反应的增强效应

本文采用超声分子束和时间分辨质谱技术研究了入射分子平动能对激光诱导气-固表面反应的增强效应. 对于由可见激光(56 nm)诱导的Cl_2与Ge(111)、Si(111)和GaAS(100)表面蚀刻反应, 研究发现提高Cl_2分子的入射平功能将明显地增加反应产率, 而且都存在一个入射平动能的反应阈值, 其数值为5～7 kJ·mol~(-1). 此外, 从反应产物的飞行时间谱测得入射分子平动能对产物平动温度的影响. 这些结果可以通过平动能促进Cl_2分子在表面上解离化学吸附过程来解释。     

Dynamics of HCl collisions with hydroxyl- and methyl-terminated self-assembled monolayers

Molecular beam scattering techniques are used to explore the energy exchange and thermal accommodation efficiencies of HCl in collisions with long-chain OH- and CH(3)-terminated self-assembled monolayers (SAMs) on gold. Upon colliding with the nonpolar methyl-terminated SAM, HCl (E(i) = 85 kJ/mol) is found to transfer the majority, 83%, of its translational energy to the surface. The extensive energy loss for HCl helps to bring the molecules into thermal equilibrium with the monolayer. Specifically, 72% of the HCl approaches thermal equilibrium prior to desorption. For the molecules that do not thermally accommodate, but scatter after an impulsive collision with the surface, the final translational energy is observed to be directly proportional to the surface temperature as the thermal surface energy and gas translational energy exchange during the collision. For the OH-terminated SAM, the impulsively scattered HCl escapes from the surface with slightly more average energy. The rigid nature of the OH-terminated SAM is due to the extended intra-monolayer hydrogen-bonding network that restricts some of the low-energy modes of the surface. However, despite the rigid nature of this system, the extent of thermal accommodation for HCl on these two surfaces is remarkably similar. It appears that the potential energy well between the impinging HCl and the polar surface groups is sufficient enough to trap HCl molecules that would otherwise scatter impulsively from this rigid SAM.     

Scattering, accommodation, and trapping of HCl in collisions with a hydroxylated self-assembled monolayer

Time-of-flight molecular beam scattering techniques are used to explore the energy exchange, thermal accommodation, and residence time of HCl in collisions with an OH-terminated self-assembled monolayer. The monolayer, consisting of 16-mercapto-1-hexadecanol (HS(CH(2))(16)OH) self-assembled on gold, provides a well-characterized surface containing hydroxyl groups located at the gas-solid interface. Upon colliding with the hydroxylated surface, the gas-phase HCl is found to follow one of three pathways: direct impulsive scattering, thermal accommodation followed by prompt desorption, and temporary trapping through HO--- HCl hydrogen bond formation. For an incident energy of 85 kJ/mol, the HCl transfers the majority, >80%, of its translational energy to the surface. The extensive energy exchange facilitates thermalization, leading to very large accommodation probabilities on the surface. Under the experimental conditions used in this work, over 75% of the HCl approaches thermal equilibrium with the surface before desorption and, for a 6 kJ/mol HCl beam, nearly 100% of the molecules that recoil from the surface can be described by a thermal distribution at the temperature of the surface. For the molecules that reach thermal equilibrium with the surface prior to desorption, a significant fraction appear to form hydrogen bonds with surface hydroxyl groups. The adsorption energy, determined by measuring the HCl residence time as a function of surface temperature, is 24 +/- 2 kJ/mol.     

甲烷在Ni表面及La薄膜上激活解离化学吸附

利用分子束技术改变甲烷的平动能E_k来研究E_k及其法向分量E_n对甲烷在Ni表面及La薄膜上激活解离吸附的影响。对CH_4/Ni及CH_4/La系统, 当甲烷的平动能E_k分别低于58.5 kJ·mol~(-1)及52.3 kJ·mol~(-1)时, 没观察到甲烷的解离吸附。当甲烷的平动能超过此阈值时, 即对CH_4/Ni系统, 当Ek=58.5增至63.8 kJ·mol~(-1)时, 初始沾着几率s_0由0至0.54线性增加; 对CH_4/La系统, 当E_k=52.3增至63.8 kJ·mol~(-1)时, S_0由0至0.49线性增加。这些结果表明, 两个系统的化学吸附是不经过前趋态的直接化学吸附。最后求出CH_4/Ni, CH_4/La系统的表观活化能分别为46.8 kJ·mol~(-1)和38.1 kJ·mol~(-1)。     

甲烷在O/Ni(100)表面上的反应动力学研究

甲烷在Ｏ／Ｎｉ（１００）表面上的反应动力学研究俞华根，程极源（中国科学院成都有机化学研究所，成都６１００１５）关键词甲烷，活化解离，预吸附氧，Ｎｉ（１００）表面，分子动力学，势能面甲烷在金属催化剂表面活化解离是重要的催化反应，受到了高度重视．近年来，...     

1064nm激光诱导Ge(111)与Cl2反应动力学

采用超声分子束和时间分辨质谱技术研究了1064nm脉冲激光辐照下Ge(111)与Cl₂的反应动力学。实验结果表明,该反应的主要产物为GeCl₂,提高入射氯分子的平动能将增加反应速率。激光能量密度对GeCl₂产率呈指数关系,而对GeCl₂的平动温度影响不大。升高Ge(111)表面温度也能提高反应产率。同时还讨论了近红外激光诱导GeCl₂反应的机理。     

Methylthiolate on Au(111): adsorption and desorption kinetics

Low energy electron diffraction, Auger electron spectroscopy, X-ray photoelectron spectroscopy and line of sight mass spectrometry have been used to study the adsorption and desorption of dimethyldisulfide (DMDS) on Au(111). At 300 K adsorption is dissociative, forming a chemisorbed adlayer of methylthiolate with a 1/3 ML, (sq rt 3 x sq rt 3)R30 degrees, structure. At 100 K adsorption is molecular, with dissociation to form the 1/3 ML (sq rt 3 x sq rt 3)R30 degrees methylthiolate structure occurring at 138-160 K. A physisorbed DMDS layer, with a coverage of 1/6 ML of DMDS, forms on top of the (sq rt 3 x sq rt 3)R30 degrees chemisorbed MT surface for T < or = 180 K, with multilayers forming for T < or = 150 K. In temperature programmed desorption, multilayers of DMDS desorbed with zero order kinetics and an activation energy of 41 kJ mol(-1); the physisorbed layer desorbed with first order kinetics, exhibiting repulsive lateral interactions with an activation energy which varied from 63 kJ mol(-1) (theta = 0) to 51 kJ mol(-1) (theta = 1); the chemisorbed methylthiolate layer desorbed associatively as DMDS via the physisorbed layer, the activation energy for the reaction, 2 methylthiolate --> physisorbed DMDS, exhibiting repulsive lateral interactions with an activation energy which varied from 65 kJ mol(-1) (theta = 0) to 61 kJ mol(-1) (theta = 1). The physisorbed disulfide layer explains the pre-cursor state adsorption kinetics observed in sticking probability measurement, while its relatively facile formation provides a mechanism by which thiolate self-assembled monolayers can become mobile at room temperature.