氢化物发生-原子荧光光谱法测定铝合金中痕量砷

建立了测定铝合金中痕量砷HG-AFS分析方法.采用王水溶解样品,在硫脲和抗坏血酸的存在下将As(Ⅴ)还原为As(Ⅲ),以KBH4溶液(20g/L)作为还原剂,HCl(5+95)溶液作为载流,用原子荧光光谱法测定样品中痕量砷.在选定的实验务件下,方法的线性范围为0.05～40μg/L,线性回归方程为,If=108.17+272.49ρ(μg/L),相关系数r=0.9997,检出限0.019μg/L.并与ICP-AES法进行了对照试验.     

分散固液微萃取在线热洗脱原子荧光法测定矿泉水中的痕量汞

研究制备了CI/SiO2/PDMS固相萃取剂,建立了分散固液微萃取在线热洗脱原子荧光联用测定矿泉水中痕量汞的方法。方法使用分散剂将CI/SiO2/PDMS均匀分散于样品溶液中,吸附并富集Hg2+与DDTC形成的Hg-DDTC螯合物。用磁子吸附收集固相萃取剂,并置于石英管中。利用电磁感应加热技术,在线加热洗脱,原子荧光法定量。方法的富集倍数达30倍,检出限为6.0ng/L;精密度RSD为3.8%(n=11,ρ=0.1μg/L)。     

HG-AFS测定垃圾焚烧炉烟道气中锑的形态

以某垃圾焚烧厂焚烧炉产生的烟道气为研究对象,采用酒石酸提取,对烟道气中sb形态进行了分析,用HG-AFS分别测出样品中Sb（Ⅲ）和总Sb的量,差减法得到Sb（V）的量。结果表明,sb（Ⅲ）和总sb检出限分别为0．13μg／L和0．11μg/L,相对标准偏差（RSD,n=11）分别为5．8％和6．3％,加标回收率在84．8％-113％。     

微波消解-原子荧光光谱法同时测定鱼体中砷和汞

为建立微波消解-原子荧光光谱法同时测定鱼体中砷和汞的测定方法,采用微波消解方法,双道原子荧光光谱法同时测定了鱼体中砷和汞的含量。结果表明,砷与汞的线性范围分别为0.2~2.0μg/L,0.0~50.0μg/L;相关系数分别为r=0.999 8和r=0.999 5;砷回收率为96.5%~101.5%之间,相对标准偏差(n=11)为1.22%,检出限为0.004 2μg/L;汞回收率为98.6%~103.0%,相对标准偏差(n=11)为0.67%,检出限为0.009 6μg/L。用该法测定鱼类中砷和汞,方法灵敏度高、操作简便快速、结果准确可靠。     

微波消解/ICP-MS法测定食品级润滑油(脂)中的锑、砷、镉、铅、汞、硒

建立了微波消解样品,ICP-MS同时测定食品级润滑油(脂)中Pb,Cd,As,Se,Sb,Hg 6种微量元素的分析方法。通过优化实验条件,方法测试食品级润滑油(脂)样品中6种微量元素的检出限在0.001~0.020μg/g之间,Pb,Cd,As,Se,Sb在5.00~100.00μg/L范围内呈现良好的线性关系,Hg在0.50~10.0μg/L范围内呈现良好的线性关系,线性相关系数均大于0.999,回收率在93.3%~116%之间,相对标准偏差(n=10)在2.3%~4.2%之间。方法能够满足食品级润滑油(脂)中微量有毒有害元素的定量测定要求。     

双道原子荧光光谱法测定蔬菜中的砷和汞

采用湿法消解蔬菜样品,用AFS-230E型双道原子荧光光度计测定蔬菜中的As和Hg重金属含量。在最佳实验条件下,As和Hg元素的工作曲线相关系数(r)分别为0.999 2和0.999 6,检出限分别为0.011 9和0.013 9μg/L,加标回收率分别为:91.6%~101.5%和89.8%~97.3%,相对标准偏差(RSD,n=7)分别为1.4%和0.52%,方法可供各地测定各类蔬菜中As和Hg等重金属元素含量作参考。     

HPLC–AFS联用测定海产品中砷的形态

建立了高效液相色谱–原子荧光分光光度法测定海产品中无机砷(As V,AsⅢ)、有机砷(DMA,MMA,AsB)含量的方法。样品经含10%(体积分数)HCl的提取液振荡提取、离心分离、二路形态分析预处理、高效液相色谱分离,用原子荧光光度计检测As(Ⅲ),DMA,MMA,As(V);四路条件(过氧化氢氧化和开启紫外灯)形态分析预处理装置处理,高效液相色谱分离,原子荧光光度计测定AsB。As(Ⅲ)线性范围为0～100.00μg/L,r2=0.999 7;DMA线性范围为0～100.00μg/L,r2=0.999 3;MMA线性范围为0～100.00μg/L,r2=0.999 0;As(V)线性范围为0～100.00μg/L,r2=0.999 1;AsB线性范围为0～200.00μg/L,r2=0.999 4。3个样品加标回收率为As(Ⅲ)86.7%～89.4%,DMA 111.2%～117.0%,MMA 109.7%～111.6%,As(V)83.8%～90.7%,AsB 88.3%～90.4%。用该方法测定虾仁(干)5个价态测定结果的相对标准偏差为3.07%～9.93%(n=6)。5个价态的检出限(S/N=2)为As(Ⅲ)0.29μg/L,DMA 0.36μg/L,MMA 0.27μg/L,As(V)0.56μg/L,AsB 1.46μg/L。该方法适用于海产品中As(Ⅲ),DMA,MMA,As(V),AsB含量的测定。     

离子交换色谱-氢化物发生双道原子荧光法同时测定砷和硒形态

建立了离子交换色谱-氢化物发生双道原子荧光联用同时测定4种As形态和3种Se形态的方法,并优化了各种实验参数。采用PRP-X100阴离子交换分析柱可以在10min内同时分离、检测As和Se形态。在8%HCl和1.5%(m/V)KBH4的氢化物反应条件下,进样量100μL,各形态的检出限为:As(Ⅲ)0.2μg/L、DMA0.3μg/L、MMA0.2μg/L、As(Ⅴ)0.3μg/L、SeCys0.6μg/L、Se(Ⅳ)0.5μg/L、SeMet3μg/L。当各As形态浓度为100μg/L、各Se形态浓度为200μg/L,各形态的精密度RSD(n=7)均小于5%。当各As形态浓度范围为5～100μg/L、SeCys和Se(Ⅳ)浓度范围为10～200μg/L、SeMet浓度范围为50～200μg/L时,各形态均可得到良好的线性关系,线性相关系数均大于0.9992。用建立的方法测定了富硒营养品中的As和Se形态,加标回收率在91%～115%之间。     

电化学氢化物发生原子荧光法同时测定砷和锑

采用电化学氢化物发生与原子荧光联用技术，同时测定了样品中的As和Sb含量。对各种实验参数和干扰情况进行了详细研究。As在0～500μg/L，sb在0～300μg/L之间均有良好的线性关系；相对标准偏差(RSD)(10μg/L，n=11)分别是3．7％和1．8％；检出限分别为0．14μg/L和0．20μg/L。     

电磁感应在线消化-原子荧光光谱法测定茶水中的砷

利用电磁感应加热原理,研制了在线消化还原、氢化物发生原子荧光法分析装置,实现了茶水中As量的在线测定.对各种实验参数和干扰情况进行了研究.方法的检出限为0.063 μg/L;样品分析精密度(RSD)为2.5%(n=11).     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.