负载型金基催化剂Au/Fe(OH)3催化苯乙烯环氧化反应

用共沉淀法制备了Au/Fe(OH)3催化剂, 以叔丁基过氧化氢为氧化剂, 考察焙烧温度和金担载量等对苯乙烯环氧化反应的影响. 结果表明, 催化剂的焙烧温度、金担载量对苯乙烯环氧化反应有较大影响. 在室温下直接合成的质量分数为4.67%的Au/Fe(OH)3催化剂对苯乙烯环氧化反应显示了很好的催化活性, 于80 ℃反应3 h苯乙烯的转化率达到84.1%, 环氧苯乙烷的选择性达到71.5%. 通过X射线粉末衍射(XRD)、X射线光电子能谱(XPS)和Mössbauer分析, 发现催化剂的催化活性与金的价态及铁的化学存在状态有很大关系. 离子态Au3+与载体Fe(OH)3的协同作用对苯乙烯环氧化反应显示出很好的催化活性.     

硫醚功能化离子液体固定纳米金粒子的制备及其催化性能

合成了一种新型的硫醚功能化离子液体(TFIL),以其为稳定剂在1-甲基-3-丁基咪唑六氟磷酸离子液体中制备了TFIL固定的纳米金粒子(GNP-TFIL)催化剂.采用红外光谱、紫外-可见光谱和透射电子显微镜等方法对GNP-TFIL催化剂进行了表征.结果表明,TFIL在固定纳米金粒子之后仍保持着离子液体的基本结构;纳米金粒子的分布均匀,粒径为2.0～3.6nm.GNP-TFIL催化剂对苯乙烯环氧化反应具有较高的催化活性,且可以重复使用.在45℃下反应6h时,苯乙烯的转化率和环氧苯乙烷的选择性分别可达100%和88.5%.     

纳米磁性颗粒负载的银催化剂催化苯乙烯环氧化反应

采用简单浸渍和液相还原法制备了Ag/KOH-γ-Fe2O3催化剂,并采用X射线衍射、透射电镜和X射线光电子能谱等方法对催化剂进行了表征.结果表明,在乙酸乙酯介质中,以叔丁基过氧化氢为氧化剂,该催化剂具有较高的催化苯乙烯环氧化活性,KOH的添加可大幅度提高环氧化反应活性和选择性.表征结果显示,反应前后催化剂性质没有发生明...     

纳米SnO2高效催化烯烃与H2O2环氧化反应研究

构建了用于催化烯烃与过氧化氢环氧化反应的高效、 绿色催化反应体系. 首先, 通过水热合成法制备了纳米SnO₂, 并在320 ℃下煅烧. 随后, 对所有催化剂进行X射线衍射(XRD)、 紫外-可见漫反射光谱(UV-Vis)、 傅里叶变换红外光谱(FTIR)、 扫描电子显微镜(SEM)和透射电子显微镜(TEM)表征. 进一步将催化剂用于以H₂O₂水溶液为氧化剂环氧化各种官能化烯烃(包括环烯烃, 苯乙烯和直链烯烃)的反应, 以高转化率和高选择性得到了环氧化物. 在相似的反应条件下, 发现合成的纳米SnO₂-170催化剂在催化1-甲基环己烯与H₂O₂的环氧化反应中的活性最佳, 在2 h内1-甲基环己烯的转化率达到100%, 环氧化物选择性达到100%.     

聚酰胺酸盐稳定的金纳米催化剂用于羧酸的绿色合成

使用一锅法成功制备了水溶性聚酰胺酸盐稳定的金纳米催化剂(AuNPs-PAAS),将该催化剂用于伯醇的催化氧化.利用紫外-可见分光光度计,X射线衍射仪(XRD),透射电子显微镜(TEM)等表征方法对催化剂进行了表征.结果表明,金纳米粒子在聚酰胺酸溶液中处于均匀分散状态,金纳米尺寸约为5 nm.将制备的纳米金催化剂用于伯醇的氧化,评价了其在伯醇氧化成羧酸反应中的催化性能,结果显示,在空气为氧化剂,水为溶剂的条件下,AuNPs-PAAS对伯醇的催化氧化为高效的准均相催化过程,高选择性得到羧酸产物,通过调节溶液的pH值,可以很容易的实现产物与反应体系分离和催化剂的回收和循环利用.     

胺功能化的拟薄水铝石纳米颗粒负载的Mn-V复合物：高效的烯烃环氧化催化剂

将具有高比表面积和表面高度羟基化的拟薄水铝石纳米颗粒与3-(3甲氧基硅烷)-正丙胺进行共价结合而官能团化,再用于负载硫酸氧钒和六羰基钼络合物。所得样品采用红外光谱、粉末X射线衍射、热重-差热分析、X射线光电子能谱、元素分析、电感耦合等离子体和透射电镜等技术进行了表征,并用于顺-环辛烯的环氧化反应中,优化了诸如溶剂和氧化剂等反应条件。反应过程采用气-液色谱进行监测。重复使用实验表明,该纳米催化剂可重复使用多次,并保持顺-环辛烯接近完全环氧化。所得到的优化反应条件也成功用于其它的取代烯烃的环氧化反应中。     

聚离子液体固载金纳米粒子的制备及其催化性能

合成了氨基功能化乙烯基咪唑离子液体(AIL),利用氨基固定金纳米粒子以及双键的聚合作用,获得了聚离子液体固载金纳米粒子的催化剂(GNPs-P-AIL).采用红外光谱、紫外-可见光谱和透射电子显微镜等方法对GNPs-P-AIL进行了表征.结果表明,AIL在固定金纳米粒子并聚合后仍然保持着离子液体的基本结构,金纳米粒子分布均匀,粒径为6～8 nm.GNPs-P-AIL催化剂对苯乙烯环氧化具有较好的催化活性,以双氧水为氧化剂,在60℃下反应6 h时,苯乙烯的转化率和环氧苯乙烷的选择性分别可达81.5%和88.3%.     

Au/γ-Al2O3的制备与表征及其催化苯甲醛直接酯化

采用直接浸渍-还原法和赖氨酸保护浸渍-还原法制备了γ-Al2O3负载的纳米金催化剂(3%Au/γ-Al2O3),并考察了其在苯甲醛与醇直接酯化反应中的催化性能.在常压无碱条件下,以赖氨酸保护浸渍-还原法制备的Au/γ-Al2O3在苯甲醛与不同脂肪醇直接酯化的反应中表现出优良的催化性能,在该催化剂催化下,苯甲醛与乙醇反应中苯甲醛的转化率可达到94.0%,苯甲酸乙酯选择性为98.5%.通过催化剂的X射线粉末衍射(XRD)、透射电镜(TEM)及X射线光电子能谱(XPS)、N2物理吸附-脱附等表征结果分析了影响催化剂性能的因素.结果表明:赖氨酸浸渍还原法制备的Au/γ-Al2O3表面上纳米金粒径小、分散性好.高分散的纳米金颗粒是提高苯甲醛与醇直接酯化反应催化性能的关键因素.     

MgO催化剂上以H2O2为氧源的苯乙烯环氧化反应

采用直接焙烧Mg(NO3)2·6H2O制备了固体MgO催化剂,并以H2O2为氧源,乙腈为溶剂,考察了其对苯乙烯环氧化反应的催化性能.运用X射线衍射、N2吸附-脱附、热重和CO2程序升温脱附对催化剂进行了表征.结果表明,MgO表面碱的强度在苯乙烯环氧化反应中起主导作用,而其表面的碱量、比表面积及孔体积等的影响较小.经75...     

扩孔硅胶担载锰卟啉配合物的催化性能研究

通过吸附作用制备了护孔硅胶担载的阳离子锰卟啉配合物MnTMPyP/SG,运用 XPS和DR-UV/vis技术对其进行了表征。将制得的催化剂用于苯乙烯和环己烯的环氧 化反应,考察了反应方式对环氧化产率的影响,结果表明超声辐射有利于环氧产率 的提高。在两种条件下考察了轴向配体对反应的影响,同时还考察了超声辐射下催 化剂的重复使用情况。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.