Magnetic studied of a binuclear Cu(II) complex constructed from Cu(II) macrocyclic complex

A new binuclear copper(II) compound [(CuL)₂(Tpha)](ClO₄)₂ · 4H₂O (I), where L = 1,3,6,9,11,14-hexaazatricyclo[12.2.1.1^6,9]octadecane, Tpha = terephthalate dianion, has been constructed and structurally characterized by X-ray crystallography. Crystal analysis denotes that complex I crystallizes in the monoclinic system, space group P2₁/c with a = 11.115(2), b = 13.185(3), c = 16.184(3) Å and β = 105.68(3)°. Magnetic measurements confirm that I present an antiferromagnetic interaction between the paramagnetic ions.     

Silica iminopyridine-functionalized nanomaghemite enhances the oxygenation activity and durability of simple Co(II) salophen complex

A novel magnetically recoverable catalyst was produced by coordinative attachment of Co(II) salophen complex to silica iminopyridine (SIPy)-functionalized-γ-Fe₂O₃ magnetic nanoparticles (SMNP@SIPy/Co(II) salophen). The vibration spectra and compositional data provided sufficient evidences for the structural integrity of as-prepared organic–inorganic nanohybrid. The magnetic nanocatalyst proved to be an efficient and selective heterogeneous catalyst for oxidation of different benzylic alcohols and featured higher catalytic activity and stability than that of homogenous counterpart. A TOF of 151 h⁻¹ and TON of more than 322 were obtained for oxidation of 4-cholrobenzyl alcohol in this catalytic system. The supported catalyst could easily be recovered from the reaction mixture by an external magnetic field and reused for subsequent experiments with consistent catalytic activity.     

Kinetics of Cu(II) reduction by natural organic matter

The kinetics of Cu(II) reduction by Suwannee River fulvic acid (SRFA) at concentrations from 0.25 to 8 mg L(-1) have been investigated in 2 mM NaHCO(3) and 0.7 M NaCl at pH 8.0. In the absence of oxygen, SRFA reduced Cu(II) to Cu(I) in a biphasic manner, with initial rapid formation of Cu(I) followed by a much slower increase in Cu(I) concentration over time. When present, oxygen only had a noticeable effect on Cu(I) concentrations in the second phase of the reduction process and at high [SRFA]. In both the absence and presence of oxygen, the rate of Cu(I) generation increased with increasing [SRFA]. At 8 mg L(-1) [SRFA], nearly 75% of the 0.4 μM Cu(II) initially present was reduced to Cu(I) after 20 min, although the yield of Cu(I) relative to [SRFA] decreased at [SRFA] > 1 mg L(-1). Two plausible kinetic modeling approaches were found to satisfactorily describe the experimental data over a range of [SRFA]. Despite some uncertainty as to which approach is correct, common features of both approaches were complexation of Cu(II) by SRFA and reduction of Cu(II) by two different electron donor groups within SRFA: a relatively labile electron donor (with a concentration of 1.1 × 10(-4) equiv of e(-) (g of SRFA)(-1)) that reduced Cu(II) relatively rapidly and a less labile donor (with a concentration of 3.1 × 10(-4) equiv of e(-) (g of SRFA)(-1)) that reduced Cu(II) more slowly.     

Chiral Cu(II) complex catalyzed enantioselective addition of phenylacetylene to N-aryl arylimines

Chiral tridentate N-tosylated aminoimine ligands were used in the Cu(II)-catalyzed enantioselective addition of phenylacetylene to N-aryl arylimines, affording products up to 92% ee.     

Enantioselective addition of terminal alkynes to aldehydes catalyzed by a Cu(I)-TRAP complex

The addition of terminal alkynes to aromatic aldehydes was carried out under mild conditions in the presence of a Cu-phosphine complex, which was prepared in situ from Cu(O-t-Bu) and TRAP chiral bisphosphine, to yield enantiomerically enriched propargyl alcohols with moderate enantioselectivities. Furthermore, according to stoichiometric reactions, the reaction presumably involves the addition of a TRAP-coordinated Cu(I) acetylide to an aldehyde.     

Combined experimental and theoretical approach to understand the reactivity of a mononuclear Cu(II)-hydroperoxo complex in oxygenation reactions

A copper(II) complex bearing a pentadentate ligand, [Cu(II)(N4Py)(CF(3)SO(3))(2)] (1) (N4Py = N,N-bis(2-pyridylmethyl)bis(2-pyridyl)methylamine), was synthesized and characterized with various spectroscopic techniques and X-ray crystallography. A mononuclear Cu(II)-hydroperoxo complex, [Cu(II)(N4Py)(OOH)](+) (2), was then generated in the reaction of 1 and H(2)O(2) in the presence of base, and the reactivity of the intermediate was investigated in the oxidation of various substrates at -40 degrees C. In the reactivity studies, 2 showed a low oxidizing power such that 2 reacted only with triethylphosphine but not with other substrates such as thioanisole, benzyl alcohol, 1,4-cyclohexadiene, cyclohexene, and cyclohexane. In theoretical work, we have conducted density functional theory (DFT) calculations on the epoxidation of ethylene by 2 and a [Cu(III)(N4Py)(O)](+) intermediate (3) at the B3LYP level. The activation barrier is calculated to be 39.7 and 26.3 kcal/mol for distal and proximal oxygen attacks by 2, respectively. This result indicates that the direct ethylene epoxidation by 2 is not a plausible pathway, as we have observed in the experimental work. In contrast, the ethylene epoxidation by 3 is a downhill and low-barrier process. We also found that 2 cannot be a precursor to 3, since the homolytic cleavage of the O-O bond of 2 is very endothermic (i.e., 42 kcal/mol). On the basis of the experimental and theoretical results, we conclude that a mononuclear Cu(II)-hydroperoxo species bearing a pentadentate N5 ligand is a sluggish oxidant in oxygenation reactions.     

Selective oxidation of sulfides and oxidative bromination of organic substrates catalyzed by polymer anchored Cu(II) complex

A new polymer-anchored Cu(II) complex has been synthesized and characterized. The catalytic performance of the complex has been tested for the oxidation of sulfides and in oxidative bromination reaction with hydrogen peroxide as the oxidant. Sulfides have been selectively oxidized to the corresponding sulfoxides in excellent yields and in the presence of KBr as the bromine source, organic substrates have been selectively converted to mono bromo substituted compounds using polymer-anchored Cu(II) catalyst. This catalyst showed excellent catalytic activity, high selectivity, and recyclability. The polymer-anchored Cu(II) catalyst could be easily recovered by filtration and reused more than five times without appreciable loss of its initial activity.     

A Cu(II)-mediated C-H oxygenation of sterically hindered tripyridine ligands to form triangular Cu(II)3 complexes

Two sterically hindered tris-pyridyl methane ligands, tris(6-methyl-2-pyridyl)methane (L1) and bis(6-methyl-2-pyridyl)pyridylmethane (L2), are newly synthesized. Under aerobic conditions, Ln (n = 1 or 2) reacts with CuX2 (X = Cl or Br), oxygenated at the methine position to LnOH or LnOMe. The former alcoholate ligand creates trinuclear Cu(II) complexes [Cu3(X)(LnO)3](PF6)2 [(X, n) = (Br, 1) 1, (C1, 1) 2, (Br, 2) 3, or (C1, 2) 4] in which the alkoxide oxygen atoms bridge copper centers. The crystal structures of 1-4 are presented along with their magnetic susceptibility data. The weak antiferromagnetic coupling between the Cu(II) centers in this trinuclear arrangement is due to weak interaction of the magnetic orbitals (dz2) which are oriented along three alternate sides in a hexagon of the Cu3O3 core in 1-4. Under anaerobic conditions, L1 reacts with CuBr2 to form a square pyramidal complex [CuL1Br2] (9) with the ligand facially capping. [Cu(Br)2(L1OMe)] (10) was obtained after the suspension of 9 in MeOH was stirred under air for 48 h. In the presence of cyclohexene, 9 is converted to [Cu(Br)(L1)]m (m = 1 or 2) 5 quantitatively to give trans- 1,2-dibromocyclohexane, indicating that Br2 is generated during the reaction. The FAB MS spectrum of [18O]-1 prepared by the reaction of L1 with CuBr2 under 18O2 shows that the ligand of [18O]-1 is L1(18O-.) L1(18OH), L1OCD3, and bis(6-methyl-2-pyridyl) ketone were obtained from reaction of L1 with CuBr2 in CD3OD under 18O2. These results indicate that the origins of the O atom in L1OH and L1OMe are O2 and MeOH, respectively. On the basis of these results, a mechanism of the oxygenation of L1 in the present system will be proposed.     

Thermal behaviour of Cu(II)-urea complex

The urea complex of copper was synthesized and its structure was established by Fourier transform infrared (FTIR), electron spin resonance (ESR) and atomic absorption spectroscopy and elemental analysis to be Cu(urea)₄Cl₂. The thermal behaviour of this complex has been studied by thermogravimetry and differential thermal analysis and FTIR and ESR. Thermal analysis shows that the decomposition of the complex occurs in four stages of weight loss of different intermediates followed by three endothermal effects. The complex is thermally stable up to 428 K. The ESR and FTIR behaviour of the Cu(II)-urea complex during thermolysis was studied between 428 and 633 K. The experimental results suggest that in this temperature range the complex decomposition occurred forming thermodynamically stable regions of Cu(II) which are ferromagnetically coupled.

---

Zusammenfassung Der Harnstoffkomplex von Kupfer wurde hergestellt, seine Zusammen-setzung ergab sich anhand von FTIR-, ESR- und Atomabsorptionsspektroskopie-Untersuchungen sowie Elementaranalyse mit der Formel Cu(Harnstoff)₄Cl₂.Mittels TG, DTA, FTIR und ESR wurde auch das thermische Verhalten dieser Komplexe untersucht. Die Thermoanalyse zeigte, daß der Zersetzungsprozeß über verschiedene Zwischen-produkte in vier Stufen mit Massenverlust verläuft, gefolgt von insgesamt drei endothermen Effekten. Bis 428 K ist der Komplex thermisch stabil. Das ESR- und FTIR-Verhalten des Cu(II)-harnstoffkomplexes bei der Thermolyse wurde im Temperaturbereich 428–633 K untersucht. Die experimentellen Ergebnisse lassen darauf schließen, daß bei der Zersetzung des Komplexes in diesem Temperaturbereich thermodynamisch stabile Regionen von ferromagnetisch gekoppeltem Cu(II) gebildet werden.

     

Metal exchange kinetics: uncatalyzed replacement of Ni(II) from tetramethylenediaminetetraacetatonickel(II) complex by Cu(II)

The kinetics of metal exchange between copper(II) and tetramethylenediaminetetraacetatonickel(II), [Ni(TMDTA)] has been studied between pH 3.4 and 4.8 at an ionic strength of 1.25 M (NaClO₄) and a temperature of 25.0 ± 0.1 °C. The reaction is first order in [Ni(TMDTA)]. The reaction order in [Cu²⁺] varies from first to zero and then back to first as [Cu²⁺] is increased. At low copper concentration, the first-order rate constant is pH independent and represents the attack of copper on the nickel complex through a pathway in which TMDTA is partially uncoordinated before reaction with copper. Evidence is presented for a stepwise dechelation mechanism followed by attack of copper to give a dinuclear intermediate. The zero-order rate is pH dependent. At higher [Cu²⁺], the swing back to first order is due to the formation of a weak copper-tetramethylenediaminetetraacetatonickelate complex which then converts to products through a dinuclear intermediate. A plausible mechanism, consistent with all the kinetic data, is presented.     

A trinucleating ligand based on 1,8-naphthalenediol: synthesis, structural and magnetic properties of a linear Cu(II)Cu(II)Cu(II) complex

The extension of Robson-type ligands from dinucleating based on 2,6-diformylphenol to trinucleating based on 2,7-diformyl-1,8-naphthalenediol is demonstrated by the synthesis, structural and magnetic characterization of the first trinuclear Cu(II) complex using a 1,8-naphthalenediol derived ligand.     

Trinuclear, antiferromagnetically coupled Cu(II) complex with an EPR spectrum of mononuclear Cu(II): effect of alcoholic solvents

A rigid trinuclear copper pyrazolato framework supports the solvolytic exchange of mu3-X by mu3-OR ligands (X = Cl and Br; R = alkyl group), converting the trinuclear ferromagnetically coupled S = 3/2 system to antiferromagnetically coupled S = 1/2 in the solid state. In contrast, we propose that, in alcoholic solutions, solvolysis results in unsymmetrical coordination of the Cu3 cluster, magnetically decoupling one Cu center from the other two. This disguises the intact triangular Cu(II)3 system as a mononuclear Cu(II) complex in its electron paramagnetic resonance spectrum.     

Cu(II)-triggered release of paclitaxel from a supramolecular complex

The research on the stimuli-responsive property of biological or synthetic macromolecules in a wide range of scientific fields is a crucial subject for the achievements of the targeted drug release and the precise control of the functions of the supramolecules at a molecular level. We used an anthraquinone-functioned cyclodextrin (1) bridged by an aza-arm to solubilise paclitaxel (PTX) by forming a supramolecular complex (1/PTX). The possible inclusion mode was given based on the experimental results of ultraviolet–visible spectroscopy, Fourier transform infrared, X-ray diffraction, fluorescence spectra, nuclear magnetic resonance, transmission electron microscope, scanning electron microscope and dynamic light scattering characterisations. The controlled release of PTX can be achieved by adding Cu²⁺ to the solution. This study provides useful references in developing stimuli-responsive drug-carrying and drug-releasing materials.     

A liquid-state copper(II) ion-selective electrode containing a complex of Cu(II) with salicylaniline

A new liquid-state ion-selective electrode based on a complex of Cu(II) with salicylaniline is described. The electrode shows linear dependence of potential on the activity of Cu(2+) in the range from 5 x 10(-6) to 0.1M, with a slope of 28.3 mV/pCu at 18 degrees . The electrode shows a better selectivity relative to Ag(I) and Hg(II) than other copper(II) ion-selective electrodes. The possibilities for using the electrode for determination of copper in the presence of interfering cations are described.     

Liquid-phase catalytic oxidation of organic substrates by a recyclable polymer-supported copper(II) complex

Chloromethylated polystyrene beads cross-linked with 6.5 % divinylbenzene were functionalized with 2-(2′-pyridyl) benzimidazole (PBIMH) and on subsequent treatment with Cu(OAc)₂ in methanol gave a polymer-supported diacetatobis(2-pyridylbenzimidazole)copper(II) complex [PS-(PBIM)₂Cu(II)], which was characterized by physicochemical techniques. The supported complex showed excellent catalytic activity toward the oxidation of industrially important organic compounds such as phenol, benzyl alcohol, cyclohexanol, styrene, and ethylbenzene. An effective catalytic protocol was developed by varying reaction parameters such as the catalyst and substrate concentrations, reaction time, temperature, and substrate-to-oxidant ratio to obtain maximum selectivity with high yields of products. Possible reaction mechanisms were worked out. The catalyst could be recycled five times without any metal leaching or much loss in activity. This catalyst is truly heterogeneous and allows for easy work up, as well as recyclability and excellent product yields under mild conditions.     

Syntheses and structures of isoindoline complexes of Zn(II) and Cu(II): an unexpected trinuclear Zn(II) complex

Deprotonation of the tridentate isoindoline ligand 1,3-bis[2-(4-methylpyridyl)imino]-isoindoline, 4'-MeLH, and reaction with hydrated zinc(II) perchlorate produces an unexpected trinuclear Zn(II) complex, [Zn(3)(4'-MeL)(4)](ClO(4))(2).5H(2)O (1), whereas reaction with hydrated copper(II) perchlorate in methanol produces the expected mononuclear product, [Cu(4'-MeL)(H(2)O)(2)]ClO(4) (2). X-ray diffraction shows that the trinuclear Zn(II) complex (1) contains a linear zinc backbone, and the arrangement of ligands about the outer chiral zinc(II) atoms is helical. The two terminal zinc ions exhibit approximate C(2) site symmetry, with tetrahedral coordination by two pyrrole and two pyridyl nitrogen atoms of the potentially tridentate isoindoline ligands. The central zinc ion exhibits approximate tetrahedral symmetry, with coordination by four pyridyl nitrogen atoms of four different isoindoline ligands. Pyridyl-pyrrole intramolecular pi-stacking interactions contribute to the stability of the trinuclear cation. The structure of the mononuclear copper(II) complex cation in 2 is best described as a distorted trigonal bipyramid. The isoindoline anion binds Cu(II) in both axial positions and one of the equatorial positions; water molecules occupy the other two equatorial positions.