New orthopalladated complexes of phosphorus ylides: Crystal structure of [Pd{CH{P(C7H6)(p-tolyl)2}COCH3}Cl{P(p-tolyl)3}]

This work reports on the preparation of the complexes [PdCl₂(Y¹)₂], [PdCl₂(Y²)₂] (Y¹ = (p-tolyl)₃PCHCOCH₃ (1a); Y² = Ph₃PCHCO₂CH₂Ph (1b)), [Pd{CHP(C₇H₆)(p-tolyl)₂COCH₃}(μ-Cl)]₂ (2a), [Pd{CHP(C₆H₄)Ph₂CO₂CH₂Ph}(μ-Cl)]₂ (2b), [Pd{CH{P(C₇H₆)(p-tolyl)₂}COCH₃}Cl(L)] (L = PPh₃ (3a), P(p-tolyl)₃ (4a)) and [Pd{CH{P(C₆H₄)Ph₂}CO₂CH₂Ph}Cl(L)] (L = PPh₃ (3b), P(p-tolyl)₃ (4b)). Orthometallation and ylide C-coordination in complexes 2a–4b are demonstrated by an X-ray diffraction study of 4a.     

Syntheses and X-ray crystallographic studies of {[Ni(en)2(pot)2]0.5CHCl3} and [Ni(en)2](3-pytol)2

Two novel Ni(II) complexes {[Ni(en)₂(pot)₂]0.5CHCl₃} (3) {pot = 5-phenyl-1,3,4-oxadiazole-2-thione} (1) and [Ni(en)₂](3-pytol)₂ (4) {3-pytol = 5-(3-pyridyl)-1,3,4-oxadiazole-2-thiol} (2) have been synthesized using en as coligand. The metal complexes have been characterized by physical and analytical techniques and also by single crystal X-ray studies. The complexes 3 and 4 crystallize in monoclinic system with space group P21/a and P121/c, respectively. The complex 3 has a slightly distorted octahedral geometry with trans (pot)⁻ ligands while 4 has a square planar geometry around the centrosymmetric Ni(II) center with ionically linked trans (3-pytol)⁻ ligands. The π?π (face to face) interaction plays an important role along with hydrogen bondings to form supramolecular architecture in both complexes.     

Synthesis and structures of crystalline lithium 1-azaallyls and a 1,3-diazaallyl derived from Li{CH(SiMe3)(SiMe3−n(OMe)n)} (n=1 or 2) and Li{CH(SiMe2OMe)2} and RCN (R=Bu, Ph, 2,5-Me2C6H3, or Ad)

Crystalline [Li{N(SiMe₂OMe)C(^tBu)C(H)(SiMe₃)}]₂ (5), [Li{N(SiMe₂OMe)C(Ph)C(H)(SiMe₃)}]₂ (6), [C(C₆H₃Me₂-2,5)C(H)(SiMe₃)}(TMEDA)](7), [Li{N(SiMe(OMe)₂)C(^tBu)C(H)(SiMe₃)}(THF)]₂ (8), Li{N(SiMe(OMe)₂)C(Ph)C(H)(SiMe₃)}(TMEDA) (9) and [Li{N(SiMe₂OMe)C(^tBu)C(H)(SiMe₂OMe)}]₂ (10) were readily obtained at ambient temperature from (i) [Li{CH(SiMe₃)(SiMe₂OMe)}]₈ (1) and an equivalent portion of RCN (R=^tBu (5), Ph (6) or 2,5-Me₂C₆H₃ (7)); (ii) [Li{CH(SiMe₃)(SiMe(OMe)₂)}]_∞ (2) and an equivalent portion of ^tBuCN (8) or PhCN (9); and (iii) [Li{CH(SiMe₂OMe)₂}]_∞ (3) and one equivalent of ^tBuCN (10). Reactions (i) and (ii) were regiospecific with SiMe_3−n(OMe)_n>SiMe₃ in 1,3-migration from C (in 1 or 2)→N. The 1-azaallyl ligand was bound to the lithium atom as a terminally bound κ¹-enamide (8 and 10), a bridging η³-1-azaallyl (6), or a bridging κ¹-enamide (5). The stereochemistry about the CC bond was Z for 5, 8 and 10 and E for 7. X-ray data are provided for 5, 6, 7, 8 and 10 and multinuclear NMR spectra data in C₆D₆ or C₆D₅CD₃ for each of 5-10.     

A ferrocenyl-bridged intramolecularly coordinated bis(diorganostannylene): Synthesis, molecular structure and reactivity of [4-t-Bu-2,6-{P(O)(O-i-Pr)2C6H2Sn}C5H4]2Fe

The intramolecularly coordinated heteroleptic stannylene [4-t-Bu-2,6-{P(O)(O-i-Pr)₂}₂C₆H₂]SnCl serves as synthon for the synthesis of the ferrocenyl-bridged bis(diorganostannylene) [4-t-Bu-2,6-{P(O)(O-i-Pr)₂}₂C₆H₂SnC₅H₄]₂Fe (1) which in turn reacts with W(CO)₆ and Cr(CO)₄(C₇H₈) to provide the corresponding transition metal complexes [4-t-Bu-2,6-{P(O)(O-i-Pr)₂}₂C₆H₂Sn{W(CO)₅}C₅H₄]₂Fe (2) and [4-t-Bu-2,6-{P(O)(O-i-Pr)₂}₂C₆H₂SnC₅H₄]₂Fe · Cr(CO)₄ (3), respectively. Reaction of compound 1 with sulphur and atmospheric moisture gave, under partial tin-carbon and oxygen-carbon bond cleavage, a tetranuclear organotin-oxothio cluster 5. All compounds were characterized by ¹H, ¹³C, ³¹P, and ¹¹⁹Sn NMR, and IR spectroscopy, as well as by single-crystal X-ray diffraction analysis. Compounds 1 and 3 were also investigated by Mössbauer spectroscopy. Cyclovoltametric studies reveal the influence of the organostannyl moieties on the redox-behaviour of compounds 1-3 in comparison with unsubstituted ferrocene.     

Syntheses and structures of [Me2Si{As(PBu)3}2] and [(CyP)3SiMe2] (Cy = cyclohexyl, C6H11)

The reaction of the anion [(^tBuP)₃As]⁻ (1) with Me₂SiCl₂ results in nucleophilic substitution of the Cl⁻ anions, giving the di- and mono-substituted products [Me₂Si{As(P^tBu)₃}₂] (3a) and [Me₂Si(Cl){As(P^tBu)₃}] (3b). Analogous reactions of the pre-isolated [(CyP)₄As]⁻ anion (2) (Cy = cyclohexyl) with Me₂SiCl₂ produced mixtures of products, from which no pure materials could be isolated. However, reaction of 2 [generated in situ from CyPHLi and As(NMe₂)₃] gives the heterocycle [(CyP)₃SiMe₂] (4). The X-ray structures of 3a and 4 are reported.     

Chemically modified oximato complexes of titanium(IV) isopropoxide as new precursors for the sol-gel preparation of nano-sized titania: Crystal and molecular structure of [Ti{ONC10H16}4·2CH2Cl2]

Reactions of [Ti(OPrⁱ)₄] with various oximes, in anhydrous refluxing benzene yielded complexes of the type [Ti{OPrⁱ}_4−n{L}_n], where, n = 1-4 and LH = (CH₃)₂CNOH (1-4), C₉H₁₆CNOH (5-8) and C₉H₁₈CNOH (9-12). The compounds were characterized by elemental analyses, molecular weight measurements, FAB-mass, FT-IR and NMR (¹H, ¹³C{¹H}) spectral studies. The FAB-mass spectra of mono- (1), and di- (2), (6), (10) substituted products indicate their dimeric nature and that of tri- (3) and tetra- (4), (8) substituted derivatives suggest their monomeric nature. Crystal and molecular structure of [Ti{ONC₁₀H₁₆}₄·2CH₂Cl₂] (8A) suggests that the oximato ligands bind the metal in a dihapto η²-(N, O) manner, leading to the formation of an eight coordinated species. Thermogravimetric curves of (3), (6) and (10) exhibit multi-step decomposition with the formation of TiO₂ as the final product in each case, at 900 °C. Low temperature (∼600 °C) sol-gel transformations of (2), (3), (4), (6), (7) and (8) yielded nano-sized titania (a), (b), (c), (d), (e) and (f), respectively. Formation of anatase phase in all the titania samples was confirmed by powder XRD patterns, FT-IR and Raman spectroscopy. SEM images of (a), (b), (c), (d), (e) and (f) exhibit formation of nano-grains with agglomer like surface morphologies. Compositions of all the titania samples were investigated by EDX analyses. The absorption spectra of the two representative samples, (a) and (f) indicate an energy band gap of 3.17 eV and 3.75 eV, respectively.     

The first bidentate phosphanylborohydride: Synthesis, structure, and reactivity towards [CpFe(CO)2I]

Deprotonation of the phosphane-borane adduct rac/meso-(HP(BH₃)(Ph)CH₂)₂ (2) with KH provides facile access to the bidentate phosphanylborohydride rac/meso-K₂[(P(BH₃)(Ph)CH₂)₂] (3). Treatment of 3 with two equivalents of [CpFe(CO)₂I] gives the dinuclear complex rac/meso-[(CpFe(CO)₂)₂-μ-(P(BH₃)(Ph)CH₂)₂] (4). Single crystals of the pure diastereomers meso-2, meso-3(thf)₄, and rac-4 have been grown from toluene/pentane, diethyl ether/thf, and benzene/pentane, respectively. The molecular structures of all three compounds have been determined by X-ray crystallography.     

Coordination chemistry of ester-functionalized cp ligands: synthesis and catalytic activity of [Rh{CpCO2(CHPh)2OH}(NBD)] and [Rh{CpCO2(CH2)3OH}(NBD)]

Two new sodium hydroxyalkoxycarbonylcyclopentadienide salts Na[rac-CpCO₂(CHPh)₂OH] (1) and Na[(2S,3S)-CpCO₂(CHPh)₂OH] (2) were prepared by reaction of NaCp with the five-membered cyclic carbonates cis-4,5-diphenyl-1,3-dioxolan-2-one and (4S,5S)-4,5-diphenyl-1,3-dioxolan-2-one. The reaction of these salts with [Rh(NBD)Cl]₂ gave [Rh{rac-CpCO₂(CHPh)₂OH}(NBD)] (3) and (−)-[Rh{(2S,3S)-CpCO₂(CHPh)₂OH}(NBD)] (4) whose catalytic activity in the hydroformylation of hex-1-ene and styrene has been investigated and compared with that of the previously reported rhodium complexes [Rh{CpCO₂(CHR)₂OH}(NBD)] (R=H, Me). In addition we also discuss some preliminary results regarding the behavior of these complexes in the hydrogenation of the same substrates. The reactivity of NaCp toward the six-membered cyclic carbonate 1,3-dioxan-2-one has also been studied and it has been found that the reaction leads to two cyclopentadienide anions [CpCO₂(CH₂)₃OH]⁻ (5) and [CpCO₂(CH₂)₃OC(O)O(CH₂)₃OH]⁻ (6) in amounts strictly dependent on the carbonate/NaCp stoichiometric ratio.     

Preparation and structural characterization of [RuCl2(CO)2{Te(CH2SiMe3)2}2] and [RuCl2(CO){Te(CH2SiMe3)2}3]

The objective of the present work was to synthesize mononuclear ruthenium complex [RuCl₂(CO)₂{Te(CH₂SiMe₃)₂}₂] (1) by the reaction of Te(CH₂SiMe₃)₂ and [RuCl₂(CO)₃]₂. However, the stoichiometric reaction affords a mixture of 1 and [RuCl₂(CO){Te(CH₂SiMe₃)₂}₃] (2). The X-ray structures show the formation of the cis(Cl), cis(C), trans(Te) isomer of 1 and the cis(Cl), mer(Te) isomer of 2. The ¹²⁵Te NMR spectra of the complexes are reported. The complex distribution depends on the initial molar ratio of the reactants. With an excess of [RuCl₂(CO)₃]₂ only 1 is formed. In addition to the stoichiometric reaction, a mixture of 1 and 2 is observed even when using an excess of Te(CH₂SiMe₃)₂. Complex 1 is, however, always the main product. In these cases the ¹²⁵Te NMR spectra of the reaction solution also indicates the presence of unreacted ligand.     

Convenient syntheses of fluorous phenols of the formula HOC6H5−n((CH2)3(CF2)7CF3)n (n=1, 2) and the corresponding triarylphosphites

The aldehydic benzyl ethers PhCH₂OC₆H₄CHO (2; a/b = para/meta series) are readily available from the corresponding phenols and react with Wittig reagents derived from [Ph₃PCH₂CH₂R_f8]⁺I⁻ (R_f8=(CF₂)₇CF₃) to give PhCH₂OC₆H₄CHCHCH₂R_f8 (86-93%, Z major). Reactions with H₂ over Pd/C give the fluorous phenols HOC₆H₄(CH₂)₃R_f8(4a,b; 87-91%). Condensations with PCl₃ and NEt₃ (3.0:1.0:3.3 mol ratio) give the fluorous phosphites P[OC₆H₄(CH₂)₃R_f8]₃(5a,b; 92-94%), but traces of 4a,b are difficult to remove. The phthalate-based benzyl ethers PhCH₂OC₆H₃(COOR)₂ (7; ,5/3,4 OC₆H₃-3,n-(R)₂ series) are easily accessed and reduced with LiAlH₄ to the diols PhCH₂OC₆H₃(CH₂OH)₂(8c,d; 89-90%). Diol 8c and the Dess-Martin periodinane react to give the dialdehyde PhCH₂OC₆H₃(CHO)₂ (9c; 95%). This is elaborated by a sequence analogous to 2→4→5 to the fluorous phenol HOC₆H₃((CH₂)₃R_f8)₂ (11c; 97%/96%, two steps) and phosphite P[OC₆H₃((CH₂)₃R_f8)₂]₃ (12c, 92%), from which traces of 11c are difficult to remove. Diol 8d can be similarly elaborated to 11d, but the dialdehyde 9d is labile and the combined yield of the Dess-Martin/Wittig steps is 32%. The CF₃C₆F₁₁/toluene partition coefficients of 11c,d, and 12c (two pony tails; 70:30, 72:28, 92:8) are much higher than those of 4a and b (one pony tail; 12:88, 14:86).     

X-ray and multinuclear NMR study of the mixed aggregate [(Ph2P(O)N(CH2Ph)CH3) · LiOC6H2-2,6-{C(CH3)3}2-4-CH3) · C7H8]2: a model for the directed metalation of phosphinamides

The addition of LiBuⁿ to a toluene solution of Ph₂P(O)N(CH₂Ph)CH₃1 and 2,6-di-tert-butyl-4-methylphenol 5 leads to the formation of the mixed dimer [(Ph₂P(O)N(CH₂Ph)CH₃) · LiOC₆H₂-2,6-{C(CH₃)₃}₂-4-CH₃) · C₇H₈]₂6. The single crystal X-ray structure shows that two lithium aryloxide moieties dimerize giving rise to a Li₂O₂ core in which each lithium atom is additionally coordinated to a phosphinamide 1 ligand. The multinuclear magnetic resonance study (¹H, ⁷Li, ¹³C, ³¹P) indicates that the solid-state structure is preserved in toluene solution. Complex 6 may be considered as a model for the pre-complexation step preceding the metalation of phosphinamides by an organolithium base.     

Synthesis and characterization of palladium(II) complexes with chiral aminophosphine ligands: Catalytic behaviour in asymmetric hydrovinylation. Crystal structure of cis-[PdCl2(PPh((R)-NHCHCH3Ph)2)2]

Optically active ligands of type Ph₂PNHR (R = (R)-CHCH₃Ph, (a); (R)-CHCH₃Cy, (b); (R)-CHCH₃Naph, (c)) and PhP(NHR)₂ (R = (R)-CHCH₃Ph, (d); (R)-CHCH₃Cy, (e)) with a stereogenic carbon atom in the R substituent were synthesized. Reaction with [PdCl₂(COD)₂] produced [PdCl₂P₂] (1) (P = PhP(NHCHCH₃Ph)₂), whose molecular structure determined by X-ray diffraction showed cis disposition for the ligands. All nitrogen atoms of amino groups adopted S configuration. The new ligands reacted with allylic dimeric palladium compound [Pd(η³-2-methylallyl)Cl]₂ to gave neutral aminophosphine complexes [Pd(η³-2-methylallyl)ClP] (2a-2e) or cationic aminophosphine complexes [Pd(η³-2-methylallyl)P₂]BF₄ (3a-3e) in the presence of the stoichiometric amount of AgBF₄. Cationic complexes [Pd(η⁴3-2-methylallyl)(NCCH₃)P]BF₄ (4a-4e) were prepared in solution to be used as precursors in the catalytic hydrovinylation of styrene. ³¹P NMR spectroscopy showed the existence of an equilibrium between the expected cationic mixed complexes 4, the symmetrical cationic complexes [Pd(η³-2-methylallyl)P₂]BF₄ (3) and [Pd(η³-2-methylallyl)(NCCH₃)₂]BF₄ (5) coming from the symmetrization reaction. The extension of the process was studied with the aminophosphines (a-e) as well as with nonchiral monodentate phosphines (PCy₃ (f), PBn₃ (g), PPh₃ (h), PMe₂Ph (i)) showing a good match between the extension of the symmetrization and the size of the phosphine ligand. We studied the influence of such equilibria in the hydrovinylation of styrene because the behaviour of catalytic precursors can be modified substantially when prepared ‘in situ’. While compounds 3 and bisacetonitrile complex 5 were not active as catalysts, the [Pd(η³-2-methylallyl)(η²-styrene)₂]⁺ species formed in the absence of acetonitrile showed some activity in the formation of codimers and dimers. Hydrovinylation reaction between styrene and ethylene was tested using catalytic precursors solutions of [Pd(η³-2-methylallyl)LP]BF₄ ionic species (L = CH₃CN or styrene) showing moderate activity and good selectivity. Better activities but lower selectivities were found when L = styrene. Only in the case of the precursor containing Ph₂PNHCHCH₃Ph (a) ligand was some enantiodiscrimination (10%) found.     

Synthesis and crystal structure of the heteroleptic lanthanum(III) bis-diphosphinomethanide complex [La{CH(PPh2)2}2(I)(THF)2]

Treatment of CH₂(PPh₂)₂ with n-BuLi/t-BuOK in diethyl ether affords the potassium diphosphinomethanide complex [K{CH(PPh₂)₂}(OEt₂)_0.5] (1) in high yield. Metathesis of two equivalents of 1 with LaI₃(THF)₄ yields the heteroleptic bis-diphosphinomethanide complex [La{CH(PPh₂)₂}₂(I)(THF)₂] (2). X-ray crystallography shows the diphosphinomethanide ligands in 2 adopt different coordination modes in the solid state; one adopts a κ²-PP mode with no La-C contact, and the other adopts an η³-PCP mode, thus giving an eight-coordinate lanthanum centre.     

Synthesis and derivatization, structures and transition metal (Mo(0), Fe(II), Pd(II) and Pt(II)) complexes of phenylaminobis(diphosphonite), PhN{P(OC6H4OMe-o)2}2

The synthesis, derivatization and coordination behavior of a new aminobis(diphosphonite), PhN{P(OC₆H₄OMe-o)₂}₂ (1) is described. The ligand 1 reacts with H₂O₂, elemental sulfur or selenium to give the corresponding dichalcogenides PhN{P(E)(OC₆H₄OMe-o)₂}₂ (E = O, 2; S, 3; Se, 4) in good yield. Reactions of 1 with Mo(CO)₆, Pd(NCCH₃)₂Cl₂ and Pt(COD)Cl₂ resulted in the formation of the chelate complexes, Mo(CO)₄[PhN{P(OC₆H₄OMe-o)₂}₂] (5) and MCl₂[PhN{P(OC₆H₄OMe-o)₂}₂] (M = Pd,7; M = Pt, 8) whereas in the reaction of 1 with [CpFe(CO)₂]₂, one of the P-N bonds cleaves due to the metal assisted hydrolysis to give a mononuclear complex, [CpFe(CO){P(O)(OC₆H₄OMe-o)₂}{PhN(H)(P(OC₆H₄OMe-o)₂)}] (6). The molecular structures of 1, 4, 5 and 6 are determined by X-ray studies.     

Reaction of nido-1,2-(CpRuH)2B3H7 with ethynylferrocene to yield new metallacarboranes

Addition of ethynylferrocene to nido-1,2-(Cp^∗RuH)₂B₃H₇ (1) at ambient temperature leads to nido-1,2-(Cp^∗Ru)₂(1,5-μ-C{Fc}Me)B₃H₇ (2, 3) and closo-4-Fc-1,2-(Cp^∗RuH)₂-4,6-C₂B₂H₃ (4). Compounds 2 and 3 represent a pair of geometric isomers, nido-species in which the regiochemistry of the alkyne reduction conforms to the Markovnikoff rule. Compound 4 is an octahedral structure in which the inserted alkyne is on an open face of the closo cluster.     

Trifluoroacetylacetonate rhodium(III) methyl complexes, cis-[Rh(TFA)(PPh3)2(CH3)(L)][BPh4] and cis-[Rh(TFA)(PPh3)2(CH3)(I)] (L = CH3CN, NH3, pyridine), in comparison with their acetylacetonate analogs

The oxidative addition of CH₃I to planar rhodium(I) complex [Rh(TFA)(PPh₃)₂] in acetonitrile (TFA is trifluoroacetylacetonate) leads to the formation of cationic, cis-[Rh(TFA)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] (1), or neutral, cis-[Rh(TFA)(PPh₃)₂(CH₃)(I)] (4), rhodium(III) methyl complexes depending on the reaction conditions. 1 reacts readily with NH₃ and pyridine to form cationic complexes, cis-[Rh(TFA)(PPh₃)₂(CH₃)(NH₃)][BPh₄] (2) and cis-[Rh(TFA)(PPh₃)₂(CH₃)(Py)][BPh₄] (3), respectively. Acetylacetonate methyl complex of rhodium(III), cis-[Rh(Acac)(PPh₃)₂(CH₃)(I)] (5), was obtained by the action of NaI on cis-[Rh(Acac)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] in acetone at −15 °C. Complexes 1-5 were characterized by elemental analysis, ³¹P{¹H}, ¹H and ¹⁹F NMR. For complexes 2, 3, 4 conductivity data in acetone solutions are reported. The crystal structures of 2 and 3 were determined. NMR parameters of 1-5 and related complexes are discussed from the viewpoint of their isomerism.     

Reactions of Mo(II)-tetraphosphine complex [MoCl2{meso-o-C6H4(PPhCH2CH2PPh2)2}] with a series of small molecules

Reactions of Mo(II)-tetraphosphine complex [MoCl₂(κ⁴-P4)] (2; P4 = meso-o-C₆H₄(PPhCH₂CH₂PPh₂)₂) with a series of small molecules have been investigated. Thus, treatment of 2 with alkynes RCCR′ (R = Ph, R′ = H; R = p-tolyl, R′ = H; R = Me, R′ = Ph) in benzene or toluene gave neutral mono(alkyne) complexes [MoCl₂(RCCR′)(κ³-P4)] containing tridentate P4 ligand, which were converted to cationic complexes [MoCl(RCCR′)(κ⁴-P4)]Cl having tetradentate P4 ligand upon dissolution into CDCl₃ or CD₂Cl₂. The latter complexes were available directly from the reactions of 2 with the alkynes in CH₂Cl₂. On the other hand, treatment of 2 with 1 equiv. of XyNC (Xy = 2,6-Me₂C₆H₃) afforded a seven-coordinate mono(isocyanide) complex [MoCl₂(XyNC)(κ⁴-P4)] (7), which reacted further with XyNC to give a cationic bis(isocyanide) complex [MoCl(XyNC)₂(κ⁴-P4)]Cl (8). From the reaction of 2 with CO, a mono(carbonyl) complex [MoCl₂(CO)(κ⁴-P4)] (9) was obtained as a sole isolable product. Reaction of 9 with XyNC afforded [MoCl(CO)(XyNC)(κ⁴-P4)]Cl (10a) having a pentagonal-bipyramidal geometry with axial CO and XyNC ligands, whereas that of 7 with CO resulted in the formation of a mixture of 10a and its isomer 10b containing axial CO and Cl ligands. Structures of 7 and 9 as well as [MoCl(XyNC)₂(κ⁴-P4)][PF₆](8′) and [MoCl(CO)(XyNC)(κ⁴-P4)][PF₆] (10a′) derived by the anion metathesis from 8 and 10a, respectively, were determined in detail by the X-ray crystallography.     

Hydroxy- and boronic-acid-functionalized carbosilanes: Synthesis and solid state structure of Si(C6H4-4-SiMe2((CH2)3OH))4

Consecutive synthesis methodologies for the preparation of carbosilanes (Ph)(Me)Si((CH₂)₃B(OH)₂)₂ (2), Si(C₆H₄-4-SiMe₂((CH₂)₃B(OH)₂))₄ (5), (Ph)(Me)Si((CH₂)₃OH)₂ (3), and Si(C₆H₄-4-SiMe_3−n((CH₂)₃OH)_n)₄ (6a, n = 1; 6b, n = 2; 6c, n = 3) are reported. Boronic acids 2 and 5 are accessible by treatment of (Ph)(Me)Si(CH₂CHCH₂)₂ (1) or Si(C₆H₄-4-SiMe₂(CH₂CHCH₂))₄ (4a) with HBBr₂·SMe₂ followed by addition of water, while 3 and 6 are available by the hydroboration of 1 or Si(C₆H₄-4-SiMe_3−n(CH₂CHCH₂)_n)₄ (4a, n = 1; 4b, n = 2; 4c, n = 3) with H₃B·SMe₂ and subsequent oxidation with H₂O₂.The single molecular structure of 6a in the solid state is reported. Representative is that 6a crystallized in the chiral non-centrosymmetric space group P2₁2₁2₁ forming 2D layers due to intermolecular hydrogen bond formation of the HO functionalities along the crystallographic a and c axes.     

Novel sandwich complexes of zirconium [C9H5(SiMe3)2](C5Me4R)ZrCl2 (R = CH3, CH2CH2NMe2): Synthesis and reduction behavior

Novel half-sandwich [C₉H₅(SiMe₃)₂]ZrCl₃ (3) and sandwich [C₉H₅(SiMe₃)₂](C₅Me₄R)ZrCl₂ (R = CH₃ (1), CH₂CH₂NMe₂ (2)) complexes were prepared and characterized. The reduction of 2 by Mg in THF lead to (η⁵-C₉H₅(SiMe₃)₂)[η⁵:η²(C,N)-C₅Me₄CH₂CH₂N(Me)CH₂]ZrH (7). The structure of 7 was proved by NMR spectroscopy data. Hydrolysis of 2 resulted in the binuclear complex ([C₅Me₄CH₂CH₂NMe₂]ZrCl₂)₂O (6). The crystal structures of 1 and 6 were established by X-ray diffraction analysis.     

Synthesis and ethylene polymerization behavior of {MeB(3-Ph-pyrazolyl)3}TiCl3

The new methyl-tris(pyrazolyl)borate reagents Li[MeTp^Ph] (1) [MeTp^Ph]⁻ = MeB(3-Ph-pyrazolyl)₃⁻) and Tl[MeTp^Ph] (2) react with TiCl₄ to afford (MeTp^Ph)TiCl₃ (3) in 77% and 81% yield respectively. 2 reacts with ZrCl₄ and HfCl₄ to yield mixtures of products. The reaction of 1 with TiCl₃(THF)₃ proceeds with B-N bond cleavage to afford TiCl₃(3-Ph-pyrazole)(THF)₂ as the major product (30%). The reaction of 3 with MeLi (3 equiv) yields 1 (60%) and reduced Ti species, via apparent displacement of [MeTp^Ph]⁻ and generation of unstable TiCl₄Me_4−x species. Under MAO activation conditions (MAO = methylalumoxane), 3 polymerizes ethylene to linear polyethylene. 3/MAO is significantly more active in ethylene polymerization than the hydrido-tris(pyrazolyl)borate analogue {HB(3-Ph-pyrazolyl)₃}TiCl₃/MAO.