聚(苯乙烯－丙烯酸)磁性高分子微球的制备和表征

利用双层表面活性剂改性的Fe3O4磁流体为种子,通过乳液聚合法考察了苯乙烯或苯乙烯-丙烯酸对Fe3O4磁流体的包覆情况,并考察了丙烯酸浓度及加入时间对磁性微球表面羧基含量的影响.结果表明,丙烯酸的加入可以明显改善包覆效果,在反应进行2h后加入0.4mL的丙烯酸可以得到包覆效果好且表面羧基含量大的磁性微球.     

First Principle Calculation of Electric and Magnetic Properties for New Half-metal Fe2ScO4

The new half-metals Fe2ScO4 and FeSc2O4 were designed and their spinel structures were optimized based on the first-principle pseudo-potential method. Their electric and magnetic properties including molecular magnetic moments and electronic structures were calculated and analyzed, and then were compared with those of Fe3O4. The calculation showed that Fe2ScO4 and FeSc2O4 were both new ferromagnetic II B-type half-metals, but Fe3O4 was ferrimagnetic. The molecular magnetic moment of Fe2ScO4 is about 7.28 1B, which is much larger than the 4.0 1B of Fe3O4 and 3.96 1B of Fe2ScO4. The molecular magnetic moment of Fe2ScO4 mainly came from the spin-polarization of Fe3d electrons. Also, the conductance of Fe2ScO4 was a little larger than that of Fe3O4. For Fe2ScO4, the average electronic structure of Sc on A-sites wasSc+3s23p43d2 and that of Fe on B-sites was Fe2+t2g3↑"tg2↑"t2g↓. It can be predicted that the new half-metal Fe2ScO4 has wider application ground in spin electronic instruments because of its larger magnetoresistance compared to Fe3O4 and FeSc2O4.     

磁性Fe_3O_4-聚吡咯纳米微球的合成与表征

报道了具有核壳结构的Fe3O4 聚吡咯磁性纳米微球的合成方法和表征结果 .微球同时具有导电性和磁性能 .在优化的实验条件下 ,可得到饱和磁化强度为 2 3 4emu g ,矫顽力为 45 2Oe的磁性微球 .微球的导电性随着微球中Fe3O4含量的增加而下降 .微球的磁性能则随着Fe3O4含量的增加而增大 .Fe3O4磁流体的粒径和磁性聚吡咯微球的粒径均在纳米量级 .纳米Fe3O4粒子能够提高复合物的热性能 .实验表明 ,磁流体和聚吡咯之间存在着一定的相互作用 ,正是这种相互作用使磁性聚吡咯纳米微球的热稳定性提高 .     

Removal of arsenic from aqueous systems by use of magnetic Fe3O4@TiO2 nanoparticles

Research on Chemical Intermediates - Fe3O4 magnetic nanoparticles coated with a TiO2 film (Fe3O4@TiO2 nanoparticles) have been synthesized by use of a modified Stöber method and used for...     

Fe_3O_4/CdTe/聚氨酯纳米复合物的制备及其性能研究

由共沉淀法和Stober法制备了伯胺基功能化SiO2稳定的Fe3O4磁性纳米粒子Fe3O4@SiO2-NH2;Fe3O4@SiO2-NH2与二异氰酸酯及咪唑阳离子二醇、聚乙二醇的反应使其表面形成阳离子型聚氨酯稳定层;通过阳离子型聚氨酯与CdTe量子点表面修饰的巯基乙酸间的电荷相互作用,制备得到了Fe3O4/CdTe/聚氨酯纳米复合物.用X射线衍射(XRD)、红外吸收光谱(FTIR)、热重分析(TGA)、透射电子显微镜(TEM)、磁强计(VSM)、紫外吸收光谱(UV)、荧光发射光谱(PL)表征了该纳米复合物的结构与性能.结果表明,CdTe量子点均匀地分散在Fe3O4@SiO2磁性纳米粒子周围,所得纳米复合物在溶剂中分散均匀,不团聚,且具有超顺磁性,并保持了CdTe量子点的荧光性能.     

P(St-GMA)/Fe3O4磁性聚合物微球的制备及表征

采用沉淀法制备了Fe3O4纳米粒子, 以苯乙烯(St)、甲基丙烯酸缩水甘油酯(GMA)为聚合单体, 使用分散聚合法制备了P(St-GMA)/Fe3O4磁性聚合物微球. 分析了Fe3O4粒子的形貌和结构. 研究了制备条件对磁性聚合物微球磁含量的影响. 采用FTIR, XRD, TG及TEM等手段对磁性聚合物微球的微观结构及形貌、磁含量等进行了分析表征. 研究结果表明, 制备的磁性聚合物微球粒径均一, 磁含量高达74%.     

磁性聚苯胺纳米微球的合成与表征

报道了具有核壳结构的Fe3O4-聚苯胺磁性纳米微球的合成方法和表征结果.微球同时具有导电性和磁性能.在优化的实验条件下,可得到饱和磁化强度Ms为55.4 emu/g,矫顽力Hc为62 Oe的磁性微球.微球的导电性随着微球中Fe含量的增加而下降.微球的磁性能则随着Fe含量的增加而增大.Fe3O4磁流体的粒径和磁性聚苯胺微球的粒径均在纳米量级.纳米Fe3O4粒子能够提高复合物的热性能.实验表明,磁流体和聚苯胺之间可能存在着一定的相互作用,但这种相互作用较为复杂,难于研究     

磁场诱导沉淀聚合制备一维Fe3O4/P（MAA-DVB）纳米链

采用溶剂热法制备了单分散Fe3O4纳米粒子,以甲基丙烯酸（MAA）和二乙烯基苯（DVB）为聚合单体,在沉淀聚合过程中通过磁场诱导自组装制备了一维高磁响应性永久连接的Fe3O4/P（MAA-DVB）纳米链.采用扫描电镜（SEM）,透射电镜（TEM）,X射线衍射仪（XRD）,热重分析（TGA）及振动样品磁强计（VSM）等对其形貌、磁含量和磁响应性等进行了分析表征.结果表明,该法制备的一维Fe3O4/P（MAA-DVB）纳米链的磁含量为91%时,其比饱和磁化强度为72emu/g.在外磁场存在条件下,一维Fe3O4/P（MAA-DVB）纳米链将按外界磁场的方向取向.此外,每个豆荚内的Fe3O4纳米粒子规则的排列在一条线上,并通过P（MAA-DVB）聚合物使其均匀分布.     

Preparation of surface plasmon resonance biosensor based on magnetic core/shell Fe3O4/SiO2 and Fe3O4/Ag/SiO2 nanoparticles

In this paper, surface plasmon resonance biosensors based on magnetic core/shell Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles were developed for immunoassay. With Fe(3)O(4) and Fe(3)O(4)/Ag nanoparticles being used as seeding materials, Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles were formed by hydrolysis of tetraethyl orthosilicate. The aldehyde group functionalized magnetic nanoparticles provide organic functionality for bioconjugation. The products were characterized by scanning electronic microscopy (SEM), transmission electronic microscopy (TEM), FTIR and UV-vis absorption spectrometry. The magnetic nanoparticles possess the unique superparamagnetism property, exceptional optical properties and good compatibilities, and could be used as immobilization matrix for goat anti-rabbit IgG. The magnetic nanoparticles can be easily immobilized on the surface of SPR biosensor chip by a magnetic pillar. The effects of Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles on the sensitivity of SPR biosensors were also investigated. As a result, the SPR biosensors based on Fe(3)O(4)/SiO(2) nanoparticles and Fe(3)O(4)/Ag/SiO(2) nanoparticles exhibit a response for rabbit IgG in the concentration range of 1.25-20.00 μg ml(-1) and 0.30-20.00 μg ml(-1), respectively.     

Tunable electrical and magnetic properties of half-metallic Zn(x)Fe(3-x)O4 from first principles

The electrical and magnetic properties of Zn-doped Fe(3)O(4) at different doping concentrations of Zn have been investigated using a density functional method with generalized-gradient approximation corrected for on-site Coulombic interactions. The electronic structure calculation predicts that Zn(x)Fe(3-x)O(4) (0 ≤x≤ 0.875) is half-metallic with a full spin polarization. The hopping carrier concentration of Zn(x)Fe(3-x)O(4) decreases with increasing x, which indicates a distinct increase in the resistivity. The saturation magnetization of Zn(x)Fe(3-x)O(4) increases evidently with increasing x from x = 0 to x = 0.75 (i.e. from 4.0 to 8.3 μ(B)/f.u.) and then decreases rapidly to zero at x = 1. The robust half-metallicity, large tunability of electrical and magnetic properties of a Zn doped Fe(3)O(4) system make it a promising functional material for spintronic applications.     

Fabrication of one-dimensional Fe3O4/P(GMA-DVB) nanochains by magnetic-field-induced precipitation polymerization

One-dimensional (1D) magnetic Fe(3)O(4)/P(GMA-DVB) peapod-like nanochains have been successfully synthesized by magnetic-field-induced precipitation polymerization using Fe(3)O(4) as building blocks and P(GMA-DVB) as linker. The Fe(3)O(4) microspheres without surface modification can be arranged with the direction of the external magnetic field in a line via the dipolar interaction between Fe(3)O(4) microspheres and linked permanently via P(GMA-DVB) coating during precipitation polymerization. The length of peapod-like nanochains can be controlled by magnetic field intensity, and the thickness of polymer shell can be tuned by the amount of monomers. Magnetic measurement revealed that these 1D peapod-like nanochains showed highly magnetic sensitivity. In the presence of magnetic field, 1D magnetic Fe(3)O(4)/P(GMA-DVB) peapod-like nanochains can be oriented and aligned along the direction of external magnetic field.     

Fe3O4@Al2O3 magnetic core-shell microspheres for rapid and highly specific capture of phosphopeptides with mass spectrometry analysis

Selective detection of phosphopeptides from complex biological samples is a challenging and highly relevant task in many proteomics applications. In this study, a novel phosphopeptide enrichment approach based on the strong interaction of Fe(3)O(4)@Al(2)O(3) magnetic core-shell microspheres with phosphopeptides has been developed. With a well-defined core-shell structure, the Fe(3)O(4)@Al(2)O(3) magnetic core-shell microspheres not only have a shell of aluminum oxide, giving them a high-trapping capacity for the phosphopeptides, but also have magnetic property that enables easy isolation by positioning an external magnetic field. The prepared Fe(3)O(4)@Al(2)O(3) magnetic core-shell microspheres have been successfully applied to the enrichment of phosphopeptides from the tryptic digest of standard phosphoproteins beta-casein and ovalbumin. The excellent selectivity of this approach was demonstrated by analyzing phosphopeptides in the digest mixture of beta-casein and bovine serum albumin with molar ratio of 1:50 as well as tryptic digest product of casein and five protein mixtures. The results also proved a stronger selective ability of Fe(3)O(4)@Al(2)O(3) magnetic core-shell microspheres over Fe(3+)-immobilized magnetic silica microspheres, commercial Fe(3+)-IMAC (immobilized metal affinity chromatography) resin, and TiO(2) beads. Finally, the Al(2)O(3) coated Fe(3)O(4) microspheres were successfully utilized for enrichment of phosphopeptides from digestion products of rat liver extract. These results show that Fe(3)O(4)@Al(2)O(3) magnetic core-shell microspheres are very good materials for rapid and selective separation and enrichment of phosphopeptides.     

Co~(2+)/Dy~(3+)掺杂纳米立方Fe_3O_4的热还原制备及磁靶向滞留性能

采用热还原沉淀法制备了一系列Co~(2+)/Dy~(3+)掺杂的纳米立方MxFe3-xO4磁性颗粒.利用X射线衍射仪、透射电子显微镜和振动样品磁强计研究了不同含量掺杂离子对MxFe3-xO4晶体结构、形貌及磁性的影响.研究发现,掺杂未改变母体的对称性,但母体形貌逐渐从立方体向球体过渡;Co~(2+)和Dy~(3+)的掺杂对于铁氧体磁学性质的影响明显不同,当Co~(2+)实际掺杂量为0.44和Dy~(3+)实际掺杂量为0.05时,MxFe3-xO4立方磁性粒子的饱和磁化强度(Ms)达到最大值,分别为76.65和70.21 A·m2·kg-1.与超顺磁性Fe_3O_4球体相比,高磁性掺杂Fe_3O_4立方体在体外模拟磁流体磁靶向定位实验中显示出较高的滞留率.     

多巴胺用量对Fe3O4@PDA@PAMAM磁性纳米吸附材料的微观结构及吸附性能的影响

以自制的Fe3O4磁性纳米材料为核,多巴胺(DA)为表面修饰剂,成功地将2.0 G聚酰胺-胺(PAMAM)树状大分子接枝在Fe3O4磁核表面,制备出了一系列不同DA含量的Fe3O4@PDA@PAMAM磁性纳米吸附材料。采用X射线衍射仪(XRD)、红外光谱仪(IR)、振动样品磁强计(VSM)、透射电子显微镜(TEM)和电感耦合等离子体发射光谱仪(ICP-OES)等分析测试手段对材料组成、微观结构、磁性能和对重金属Cd(Ⅱ)离子的吸附性能进行了测试和表征。研究了修饰剂DA用量对Fe3O4@PDA@PAMAM磁性纳米吸附材料的相组成、微观结构、磁性能和吸附性能的影响。实验结果表明,Fe3O4@PDA@PAMAM磁性纳米吸附材料均呈典型的核-壳结构,材料晶型均呈现尖晶石结构,且壳层厚度随DA用量增加而增厚;材料的饱和磁化强度(Ms)均比Fe3O4的小,且随着DA用量的增加而降低,并且材料的矫顽力(Hc)和剩余磁化强度(Mr)均较低,其磁响应特性适合于做为可回收磁性纳米吸附材料。材料对Cd(Ⅱ)离子的平衡吸附容量随着DA用量的增加呈先增加后减小趋势。当Fe3O4和DA的质量比为8∶4时,吸附剂对Cd(Ⅱ)离子的吸附容量达到最大值165.13 mg·g^-1。     

Water-soluble Fe3O4 nanoparticles with high solubility for removal of heavy-metal ions from waste water

In this contribution, we synthesized water-soluble Fe(3)O(4) nanoparticles (NPs) with sufficiently high solubility (28 mg mL(-1)) and stability (at least one month) through a hydrothermal approach, and found that they exhibited excellent removal ability for heavy-metal ions from waste water. For the first time, the water-soluble Fe(3)O(4) NPs were used as adsorbents for heavy-metals removal from wastewater. It is noteworthy that the adsorption ability of the water-soluble Fe(3)O(4) NPs for Pb(2+) and Cr(6+) is stronger than water-insoluble Fe(3)O(4) NPs. Furthermore, the water-soluble Fe(3)O(4) NPs exhibited relatively high saturation magnetization (83.4 emu g(-1)), which allowed their highly-efficient magnetic separation from wastewater. The most important thing is that the water-soluble magnetite as an adsorbent can directly dissolve in water without the help of mechanical stirring or any extraneous forces, which may solve a key problem for the practical application of magnetic powders in the field of sewage purification. Moreover, the water-soluble Fe(3)O(4) NPs show a highly-efficient adsorption capacity for 10 ppm of Pb(2+) ions solution which can reach 90% within 2 minutes.     

Intracellular spatial control of fluorescent magnetic nanoparticles

We report a facile intracellular manipulation of fluorescent magnetic Fe3O4-CdSe nanoparticles using magnetic force. The growth of CdSe quantum dots on Fe3O4 nanoparticles produces Fe3O4-CdSe nanoparticles with two distinct properties, fluorescence and superparamagnetism. After nonspecific surface modification using glutathione (GSH), the hydrophilic Fe3O4-CdSe@GSH nanoparticles can be easily uptaken by an HEK293T cell line. Confocal images indicate that the uptaken nanoparticles can be manipulated using a small magnet. The successful intracellular manipulation of magnetic nanoparticles may offer a new strategy for studying polarized cells.     

正电性磁性氧化铁胶粒负载钯催化的Suzuki偶联反应

发展了一种超顺磁性Fe3O4纳米粒子负载Pd0的简易方法. 利用Fe3O4溶胶带正电荷的特性, 将负离子 通过静电作用吸附在Fe3O4胶体粒子表面( /Fe3O4), 以抗坏血酸(Vc)进一步还原即得到载有金属Pd团簇的Fe3O4胶体粒子(Pd0/Fe3O4). 该磁性载体负载的Pd催化剂对Suzuki反应表现出良好的催化活性, 且在反应后, 可方便地通过永久磁铁将催化剂从反应体系中分离出来, 进行循环使用. 试验表明, 该催化剂在循环使用五次后反应活性无明显下降. 进一步试验发现, 这种磁性纳米粒子负载的金属钯对一系列卤代芳烃的Suzuki偶联反应均表现出较优的催化活性.     

热敏性高分子包裹的磁性微球的合成

磁性高分子微球由于其在外加磁场作用下简单、快速易行的磁分离特性，其在细胞分离、固定化酶、靶向药物等领域的应用研究日益活跃，并显示出较好的应用前景［１］．有关文献报道了制备磁性微球的不同方法［２］．Ｎ 异丙基丙烯酰胺（Ｎ ｉｓｏｐｒｏｐｙｌａｃｒｙｌａ...     

A biocompatible method of decorporation: bisphosphonate-modified magnetite nanoparticles to remove uranyl ions from blood

We report on the use of bisphosphonate to functionalize Fe3O4 magnetic nanoparticles via dopamine (DA) linkage. Using tetraethyl-3-aminopropane-1,1-bisphosphonate (BP) as the functional molecule, we created a system with an Fe3O4-DA-BP nanostructure, which possesses high specificity for removing uranyl ions from water or blood. This work demonstrates that magnetic nanoparticles, combined with specific receptor-ligand interactions, promise a sensitive and rapid platform for the detection, recovery, and decorporation of metal toxins from biological environment.     

Correlation between spin-orbital coupling and the superparamagnetic properties in magnetite and cobalt ferrite spinel nanocrystals

The superparamagnetic properties of CoFe2O4 and Fe3O4 nanocrystals have been systematically investigated. The observed blocking temperature of CoFe2O4 nanocrystals is at least 100 deg higher than that of the same sized Fe3O4 nanocrystals. The coercivity of CoFe2O4 nanocrystals at 5 K is over 50 times higher than the same sized Fe3O4 nanocrystals. The drastic difference in superparamagnetic properties between the similar sized spherical CoFe2O4 and Fe3O4 (or FeFe2O4) spinel ferrite nanocrystals was correlated to the coupling strength between electron spin and orbital angular momentum (L-S) in magnetic cations. Compared to the Fe2+ ion, the effect of much stronger spin-orbital coupling at Co2+ lattice sites leads to a higher magnetic anisotropy and results in the dramatic discrepancy of superparamagnetic properties between CoFe2O4 and Fe3O4 nanocrystals. These results provide some insight to the fundamental understanding of the quantum origin of superparamagnetic properties. Furthermore, they suggest that it is possible to control the superparamagnetic properties through magnetic coupling at the atomic level in spinel ferrite nanocrystals for various applications.