(1S,2S)-1,2-二苯基乙二胺修饰Ir/SiO2催化苯乙酮及其衍生物不对称加氢（英文）

不添加任何稳定剂,在碱性条件下制备了5%Ir/SiO2催化剂,并用于催化苯乙酮的不对称加氢反应中,详细考察了碱和手性修饰剂种类、氢气压力、反应温度、(1S,2S)-1,2-二苯基乙二胺((1S,2S)-DPEN)浓度对反应的影响.在优化反应条件下,5%Ir/SiO2催化剂表现出较好的反应活性和对映选择性.其中,苯乙酮不对称加氢反应的对映选择性达70%.该催化剂不需要任何稳定剂,制备方法简单,催化性能稳定,通过简单的离心分离即可循环使用.     

Polymer-supported gadolinium triflate as a convenient and efficient Lewis acid catalyst for acetylation of alcohols and phenols

A polymer-supported gadolinium triflate (CMPS-IM-Gd) catalyst was prepared from chloromethyl polystyrene (CMPS) resin using a simple and convenient procedure. This polymeric catalyst was used as an efficient Lewis acid catalyst for the acetylation of various alcohols and phenols with acetic anhydride, affording high yields under mild conditions. The reaction was completed in a short period of time with small amounts of the catalyst. The catalyst was reused over 10 times without any significant loss of its catalytic activity.     

A heterogeneous cobalt(II) Salen complex as an efficient and reusable catalyst for acetylation of alcohols and phenols

Acetylation of various alcohols and phenols was performed successfully using an immobilized cobalt(II) catalyst in high yield. The catalyst shows high thermal stability and was also recovered and reused at least 10 times without any considerable loss of activity.     

Efficient synthesis of symmetrical phthalate and maleate diesters using phosphinite ionic liquids

Symmetrical dialkyl phthalates and maleates were synthesized using phosphinite ionic liquid as a catalyst and reaction medium. The results indicated that phosphinite ionic liquid shows better catalytic and reusable performance without using any acid or base catalyst. Under the optimum conditions, using 1-methyl-3-(4-phosphinitebutyl) imidazolium chloride as catalyst, the conversion of phthalic and maleic anhydrides to the corresponding diesters of primary and secondary alcohols was occurred in 72?C85% yields. The diesters of tertiary alcohols and phenols could not be prepared by this method. A kind of widely used plasticizer, dioctyl phthalate, was prepared in good yield under these conditions. The ionic liquid could be reused three times after easy separation from the products without any disposal.     

Efficient and selective sulfoxidation by hydrogen peroxide, using a recyclable flavin--[BMIm]PF6 catalytic system

A new flavin catalyst 2 immobilized in an ionic liquid ([BMIm]PF6) was used for the highly selective oxidation of sulfides to sulfoxides by hydrogen peroxide. The sulfoxides were obtained in good to high yields and high selectivity without any detectable overoxidation to sulfone. The catalyst in the ionic liquid was recycled up to seven times without loss of activity or selectivity.     

Imidazolium-modified poly(l-leucine) catalyst: an efficient and recoverable catalyst for Juliá-Colonna reactions

A novel, easily recyclable imidazolium-modified poly(amino acid) catalyst was prepared. This catalyst exhibits high activity for the asymmetric epoxidation of α,β-unsaturated ketones without any pre-activation. The enantioselectivity was up to 99% ee for epoxidation of p-methoxychalcone. Compared to classical Juliá-Colonna catalysts, this insoluble, powdery catalyst can dramatically reduce the reaction time and can be easily recycled by a simple filtration after the reaction. More importantly, the recycled catalyst has been successfully reused for seven cycles without deterioration in catalytic efficiency.     

Palladium containing periodic mesoporous organosilica with imidazolium framework (Pd@PMO-IL): an efficient and recyclable catalyst for the aerobic oxidation of alcohols

The application of a novel palladium containing ionic liquid based periodic mesoporous organosilica (Pd@PMO-IL) catalyst in the aerobic oxidation of primary and secondary alcohols under molecular oxygen and air atmospheres is investigated. It was found that the catalyst is quite effective for the selective oxidation of several activated and non-activated alcoholic substrates. The catalyst system could be successfully recovered and reused several times without any significant decrease in activity and selectivity. Moreover, the hot filtration test, atomic absorption spectroscopy (AA) and kinetic study with and without selective catalyst poisons showed that the catalyst works in a heterogeneous pathway without any palladium leaching in reaction solution. Furthermore, nitrogen-sorption experiment and transmission electron microscopy (TEM) image proved the superior stability of high-ordered PMO-IL mesostructure during reaction process. TEM image also confirmed the presence of well-distributed Pd-nanoparticles in the uniform mesochannels of the material. These observations can be attributed to the ionic liquid nature of PMO-IL mesostructure which facilitates the reaction through production, chemical immobilization and stabilization of active palladium nanoparticles, as well as preventing Pd-agglomeration during overall process.     

Ecofriendly and facile Nano ZnO catalyzed solvent-free enamination of 1,3-dicarbonyls

Nano zinc oxide (Nano-ZnO) was explored as a reusable catalyst for the enamination of 1,3-dicarbonyls using diverse amines. To make the process environmentally viable, the reaction was carried out under solvent-free conditions and found to give good yield of desired products. The catalyst was characterized by various analytical techniques such as UV-spectroscopy, XRD, and TEM. The catalyst was found to be reusable up to four catalytic cycles without any appreciable loss in activity.     

Green Procedure for the Synthesis of β-Nitro Sulfides by Michael Addition of Thiols to Nitroolefins

Michael addition of thiols to nitroolefins was carried out in water at room temperature without any catalyst, and β-nitro sulfides were obtained in excellent yields. This is the first example of Michael addition of thiols to nitroolefins in water without use of any catalyst. It provides a highly efficient, general, and practical green route to synthesis of β-nitro sulfides. Twenty-four new β-nitro sulfides were synthesized using this technique.     

高效且环境友好的催化剂—CMC负载稀土催化剂在一锅法合成咪唑类衍生物中的应用

CMC负载稀土催化剂是由CMC和异丙氧基稀土制得。这种固体Lewis酸催化剂被用在比较温和的条件下合成取代的咪唑类化合物。相比于昂贵的稀土Lewis酸Ln(OTf)3，廉价的CMC负载稀土催化剂也显示出了很高的催化活性。此外，这种催化剂还具有易于回收和重复使用五次以上没有明显失活的优点。     

TEMPO supported on magnetic C/Co-nanoparticles: a highly active and recyclable organocatalyst

TEMPO was grafted on graphene-coated nanobeads with a magnetic cobalt core by using a general applicable "click"-chemistry protocol. The new heterogeneous CoNP-TEMPO emerged as a highly active catalyst for the chemoselective oxidation of primary and secondary alcohols using bleach as terminal oxidant. The outstanding stability of the C/Co nanoparticles enables the nanopowder to tolerate several TEMPO-mediated iterative oxidation reactions without any significant loss in catalyst activity. Furthermore, the excellent magnetic properties enable the rapid separation and quantitative recycling of CoNP-TEMPO out of the reaction mixture by simple magnetic decantation. The recovered nanoparticles can be subsequently reused without any further purification.     

Highly efficient and reusable polystyrene‐supported copper(II) catalytic system for S‐arylation of potassium thiocyanate by aryl halides in water

An inexpensive, efficient and environmentally friendly copper(II) catalyst supported on polystyrene was successfully synthesized and used as a heterogeneous catalyst for S‐arylation of potassium thiocyanate by aryl halides. Also this catalyst could be recovered and reused several times without any noticeable decrease in its catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Baeyer-Villiger oxidation of cyclic ketones over iron-containing mesoporous MCM-48 silica materials

Fe-MCM-48 mesoporous material was found to be a highly active catalyst for the Baeyer-Villiger oxidation of several cyclic ketones. The catalyst could be reused several times without any loss of activity.     

A heterogeneous and reusable nanopolymer-supported palladium catalyst for the copper- and phosphine-free Sonogashira coupling reaction under aerobic conditions in water

We report here the synthesis of a nanopolymer-supported palladium(II) complex catalyst, [PS-tet-Pd(II)] using a simple protocol. The catalyst was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), FT-IR, and energy dispersive X-ray spectroscopy (EDS). PS-tet-Pd(II) proves to be a useful heterogeneous catalyst in the copper- and phosphine-free Sonogashira coupling reaction in water. The catalyst can be recovered from the reaction mixture by simple filtration and reused several times without any significant loss of catalytic activity.     

Methanol aided synthesis of PdNPs decorated on montmorillonite K 10 and its implication in Suzuki Miyaura type cross coupling reaction under base free condition

An efficient catalyst PdNPs decorated on Montmorillonite K 10 is prepared by simply stirring Pd(OAc)₂ in methanol at room temperature without using any external reducing agent. The catalyst shows excellent activity for Suzuki Miyaura type cross coupling reaction between aryl diazonium salt and arylboronic acid under ligand and base free reaction conditions within short reaction time. The main advantage of this methodology is the easy synthesis of heterogeneous PdNPs @ Mont K 10 catalyst in a mild condition without using any reducing agent or additive and the catalyst is very efficient for biaryl synthesis. The catalyst is well characterized by SEM, EDX, TEM, BET, Powder XRD, TGA, DSC etc. The reaction pathway is greener with aqueous reaction medium, base free reaction condition, room temperature and reusable heterogeneous catalyst.     

[Hmim]_3PW_(12)O_(40):A high-efficient and green catalyst for the acetalization of carbonyl compounds

<正>[Hmim]_3PW_(12)O_(40) was developed and used in the acetalization of carbonyl compounds in excellent yields.The ionic liquidheteropoly acid hybrid compound and reaction medium formed temperature-dependent phase-separation system with the ease of product as well as catalyst separation.The catalyst was recycled more than 10 times without any apparent loss of catalytic activity.     

A Brønsted acid catalyst for the enantioselective protonation reaction

A highly reactive and robust chiral Br?nsted acid catalyst, chiral N-triflyl thiophosphoramide, was developed. The first metal-free Br?nsted acid catalyzed enantioselective protonation reaction of silyl enol ethers was demonstrated using this chiral Br?nsted acid catalyst. The catalyst loading could be reduced to 0.05 mol % without any deleterious effect on the enantioselectivity.     

Highly efficient dehydrogenation of indolines to indoles using hydroxyapatite-bound Pd catalyst

A hydroxyapatite-bound palladium catalyst was found to be effective for the dehydrogenation of various types of indolines to give the corresponding indoles. Moreover, the catalyst was readily recovered from the reaction mixture, and could be reused without any loss of its catalytic activity.     

Gold nanoparticles supported on ionic liquid‐modified cellulose as an efficient and recyclable catalyst for the oxidation of alcohols to aldehydes/ketones and reduction of nitroarenes

A novel catalyst of gold nanoparticles supported on cellulose fibres with the ionic liquid framework (Au NPs@CL‐IL) has been shown to be a highly active and recyclable catalyst for the oxidation of primary and secondary alcohols and reduction of nitroarenes in aqueous media. The reusability of this catalyst is high, and it can be reused ten times without a significant decrease in its catalytic activity. Furthermore, transmission electron micrographs of the recovered catalyst show the presence of well‐distributed Au NPs on the CL‐IL fibres without any aggregation.     

Ionic Liquid‐coordinated Ytterbium(III) Sulfonate Catalyzed Michael Addition of Indoles to Electron‐deficient Nitroolefins

The Michael addition of indoles to electron‐deficient nitroolefins was effectively catalyzed by an ionic liquid‐coordinated ytterbium(III) sulfonate catalyst. The recycling procedure of the catalyst was very simple without extraction with water, and the catalyst was reused for five times without any loss of its catalytic activity. Furthermore, to demonstrate the application of this methodology, the Pictet‐Spengler reaction was chosen and successfully carried out in the mixture of Br?nsted‐acidic ionic liquid and [bmim]BF₄.