Dynamic production prediction and parameter identification for gas well with vertical fracture

ＮｏｍｅｎｃｌａｔｕｒｅＢ—ｖｏｌｕｍｅｃｏｅｆｆｉｃｉｅｎｔｏｆｆｏｒｍａｔｉｏｎｆｌｕｉｄ ,ｄｉｍｅｎｓｉｏｎｌｅｓｓ ;Ｃｆｔ—ｃｏｍｐｒｅｈｅｎｓｉｖｅｃｏｍｐｒｅｓｓｉｎｇｃｏｅｆｆｉｃｉｅｎｔｏｆｆｌｕｉｄｉｎｆｒａｃｔｕｒｅ ,(ＭＰａ) - 1;Ｃｐ—ｗｅｉｇｈｔｏｆｓｉｎｇｌｅｌａｙｅｒｐｒｏｐｐａｎｔｐｅｒｕｎｉｔｆｒａｃｔｕｒｅａｒｅａ ,ｋｇ/ｍ2 ;Ｃｔ —ｃｏｍｐｒｅｈｅｎｓｉｖｅｃｏｍｐｒｅｓｓｉｎｇｃｏｅｆｆｉｃｉｅｎｔｏｆｆｏｒｍａｔｉｏｎｆｌｕｉｄ ,(ＭＰａ) - 1;ｄＢＨＮ —Ｂｒ…     

A numerical approach for pressure transient analysis of a vertical well with complex fractures

A new well test model for a vertical fractured well is developed based on a discrete-fracture model in which the fractures are discretized as one dimensional (1-D) entities. The model overcomes the weakness of complex meshing, a large number of grids, and instability in conventional stripe-fracture models. Then, the discrete-fracture model is implemented using a hybrid element finite-element method. Triangular elements are used for matrix and line elements for the fractures. The finite element formulation is validated by comparing with the semi-analytical solution of a single ver-tical fractured well. The accuracy of the approach is shown through several examples with different fracture apertures, fracture conductivity, and fracture amount. Results from the discrete-fracture model agree reasonably well with the stripe-fracture model and the analytic solutions. The advantages of the discrete-fracture model are presented in mesh gen-eration, computational improvement, and abilities to handle complex fractures like wedge-shaped fractures and fractures with branches. Analytical results show that the number of grids in the discrete-fracture model is 10%less than stripe-fracture model, and computational efficiency increases by about 50%. The more fractures there are, the more the com-putational efficiency increases.     

Numerical well test for well with finite conductivity vertical fracture in coalbed

A new well test model is developed for the hydraulic fractured well in coalbed by considering the following aspects： methane desorption phenomena, finite conductivity vertical fractures, and asymmetry of the fracture about the well. A new parameter is introduced to describe the storage of the fracture, which is named as a combined fracture storage. Another new concept called the fracture asymmetry coefficient is used to define the asymmetry of the fracture about the well. Finite element method （FEM） is used to solve the new mathematical model. The well test type curves and pressure fields are obtained and analyzed. The effects of the combined fracture storage, desorption factor, fracture conductivity, and fracture asymmetry coefficient on the well test type curves are discussed in detail. In order to verify the new model, a set of field well test data is analyzed.     

Self-similar solutions of the problem of formation of a hydraulic fracture in a porous medium

The problem of hydraulic fracture formation in a porous medium is investigated in the approximation of small fracture opening and inertialess incompressible Newtonian fluid fracture flow when the seepage through the fracture walls into the surrounding reservoir is asymptotically small or large. It is shown that the system of equations describing the propagation of the fracture has self-similar solutions of power-law or exponential form only. A family of self-similar solutions is constructed in order to determine the evolution of the fracture width and length, the fluid velocity in the fracture, and the length of fluid penetration into the porous medium when either the fluid flow rate or the pressure as a power-law or exponential function of time is specified at the fracture entrance. In the case of finite fluid penetration into the soil the system of equations has only a power-law self-similar solution, for example, when the fluid flow rate is specified at the fracture entrance as a quadratic function of time. The solutions of the self-similar equations are found numerically for one of the seepage regimes.     

边界元理论在复杂外边界油藏水平井渗流中的应用

受构造作用的影响,实际油藏的外边界往往是复杂多样的.本文从渗流理论出发建立了复杂外边界油藏水平井渗流数学模型,并采用Lord Kelvin点源解、贝塞尔函数积分和泊松叠加公式等方法求解了复杂外边界油藏水平井的边界元基本解,利用边界元的理论建立了复杂外边界油藏水平井井底压力响应数学模型.通过计算得到了无因次压力和压力导数双对数理论图版,并在其基础上分析了复杂外边界油藏水平井渗流特征及其影响因素.     

Effect of residual oil saturation on the flow through a porous medium in the neighborhood of an injection well

Models of the residual oil saturation and models of its effect on the flow in injection wells are proposed. The threshold nature of the dependence of the residual oil saturation on the capillary number determines a change in the flow regimes in the neighborhood of the injection well. The cases of pure, contaminated, and compressible reservoirs are considered. The dependences of the basic problem parameters on the displacement conditions and the state of the reservoir are obtained, together with formulas for the pressure distribution and well injectivity. The topicality of such a simulation for field calculations is demonstrated.     

Simulation of micellar-polymericwater-flooding in a system of wells

A mathematical model of the time-dependent two-dimensional flow of a two-phase multicomponent incompressible fluid through a porous medium is proposed for the micellar-polymeric flooding of oil reservoirs. The oil displacement process is investigated numerically using an implicit first-order-accurate upwind scheme with integration over the nonlinearity on a uniform grid under the assumption of plane-radial motion in the neighborhood of the wells. The influence of the nonuniform permeability of the porous medium on the efficiency of the proposed method of improving oil recovery is analyzed using a five-point slug injection scheme.Translated from Izvestiya Rossiiskoi Academii Nauk, Mekhanika Zhidkosti i Gaza, No. 6, 2004, pp. 124–132. Original Russian Text Copyright © 2004 by Inogamov and Khabeev.     

Problem of propagation of a gas fracture in a porous medium

The problem of gas fracture formation in a porous medium is investigated. An inertialess viscous polytropic gas flow along the fracture is considered. The assumption of small fracture width with respect to the height and length makes it possible to adopt the vertical plane cross-section hypothesis on the basis of which the dependence of the gas pressure inside the fracture on its width can be reduced to a linear law. Initially, the soil surrounding the fracture is soaked with oil-bearing fluid. During fracturing the reservoir gas penetrates into the soil mass and displaces the fluid. A closed system of equations, which describes the evolution of the fracture opening, the depth of gas penetration into the reservoir, and the gas velocities inside the fracture, is constructed. The limiting regimes of gas seepage into the surrounding reservoir are considered and a one-parameter family of self-similar solutions of the system is given for each. The asymptotics of the solution in the neighborhood of the fracture nose is investigated and analytic expressions for the fracture length are obtained. The solution of the problem of gas fracture is compared with the hydraulic fracturing problem in an analogous formulation within the framework of the plane cross-section hypothesis.     

多尺度嵌入式离散裂缝模型模拟方法

天然裂缝性油藏和人工压裂油藏内裂缝形态多样,分布复杂,传统的离散裂缝模型将裂缝作为基岩网格的边界,采用非结构化网格进行网格划分,其划分过程复杂,计算量大。嵌入式离散裂缝模型划分网格时不需要考虑油藏内的裂缝形态,只需对基岩系统进行简单的网格剖分,可以大大降低网格划分的复杂度,从而提高计算效率。然而,在油藏级别的数值模拟和人工压裂裂缝下的产能分析中,仍然存在计算量巨大、模拟时间过长的问题。本文提出嵌入式离散裂缝模型的多尺度数值计算格式,使用多尺度模拟有限差分法研究嵌入式离散裂缝模型渗流问题。通过在粗网格上求解局部流动问题计算多尺度基函数,多尺度基函数可以捕捉裂缝与基岩间的相互关系,反映单元内的非均质性,因此该方法既有传统尺度升级法的计算效率,又可以保证计算精度,数值结果表明这是一种有效的裂缝性油藏数值模拟方法。     

Optimum shape of a cavity for the collection of a soil-saturating viscous fluid

The process of inflow of an oil-bearing fluid from an infinite region of porous soil into a cavity (reservoir) and its subsequent pumping into a well located at the center of the reservoir is investigated. The cavity is chosen from the class of flattened ellipsoids of revolution. Thus, a combined problem of the optimization of the shape of a cavity of given volume for which the maximum seepage flow is achieved and the approximate determination of the additional constraints on the cavity dimensions necessary to ensure the outflow of the oil-bearing fluid is considered.     

Flow field modelling near a well with a conductive fracture

In the technology of oil recovery the oil production rate can be increased by generation of a vertical sand-filld conductive fracture on the wall of the well. Oil diffuses through the conductive fracture to the well. In this paper the seepage flow and isothermal deformation fields in both the formation and fracture and the oil production rate at the well are studied by modelling the formation as an infinite poroelastic medium saturated with a one-phase compressible fluid. The fracture is treated as a one-dimensional poroelastic medium. Darcy flows are considered in both the formation and fracture. The plane strain condition is imposed. Our solution is obtained numerically by a finite element method based on a variational principle. The accuracy of the analysis is studied by comparison of the numerical solutions of some problems with their analytical solutions. Since we are dealing with the transient flow problem of an infinite region, an extrapolation technique is employed to find the finite element solution. The production rate of a well with the conductive fracture is compared with that of a well without the conductive fracture.     

Seepage-Diffusion Model of Brine Migration in Inhomogeneous Aquifers

A new phenomenological mathematical model of the propagation of high- and low-salinity solutions through inhomogeneous aquifers is proposed. The model consists of interrelated equations of two-phase flow and diffusive mass transfer through a porous medium in a region with a traveling boundary. Features of different contamination scenarios of are analyzed with reference to particular examples.     

Aspects of geothermal well test analysis in fractured reservoirs

Several numerical experiments comparing the response of a fractured geothermal reservoir with that of a uniform reservoir are reported. A constant rate drawdown test followed by a buildup test is investigated for both an initially two-phase reservoir and an initially liquid reservoir which flashes during the test. Also, cold water injection into a two-phase reservoir is considered. In all cases the fracturing of the reservoir significantly changes the results for the uniform reservoir, and makes interpretation of the well test results more difficult.     

Plane steady-state incompressible fluid flow through a porous medium with a nonlinear resistance laws in the presence of a sink

Plane nonlinear fluid flows through a porous medium which simulate a sink located at the same distance from the roof and floor of the stratum for two nonlinear flow laws are constructed. The following flow laws are taken: a power law and a law of special form reducing to analytic functions in the hodograph plane.     

Extension of Whittaker equations to non-holonomic mechanical systems

In 1904, using the energy integral Whittaker studied the reduction of a dynamical problem to a problem with fewer degrees of freedom for the holonomic conservative systems and obtained the Whittaker equation^[1].In this article, Whittaker equations are extended to non-holonomic systems and the generalized Whittaker equations are obtained. And then these equations are transformed into Kiel-sen’s form.Finally an example is given.     

Two-phase flow for a horizontal well penetrating a naturally fractured reservoir with edge water injection

This paper examines the two-phase flow for a horizontal well penetrating a naturally fractured reservoir with edge water injection by means of a fixed streamline model. The mathematical model of the vertical two-dimensional flow or oil-water for a horizontal well in a medium with double-porosity is established, and whose accurate solutions are obtained by using the characteristic method. The saturation distributions in the fractured system and the matrix system as well as the formula of the time of water free production are presented. All these results provide a theoretical basis and a computing method for oil displacement by edge water from naturally fractured reservoirs.     

Pressure distribution in the neighborhood of a growing fracture with a constant wedge force

Exact solutions of the problem of the pressure field in the neighborhood of a hydraulic fracture developing in accordance with a square root law in a permeable porous medium with a constant wedge force acting on the fracture edges are constructed. A particular case admitting a self-similar formulation and an exact solution and, as a result, the fairly complete investigation, is considered. The solution constructed holds for an arbitrary self-similar pressure distribution over the fracture edges. The problem considered reduces to the solution of a mixed boundary-value problem for the Helmholtz equation. The solution found can be useful both in itself and for testing more universal numerical algorithms.     

Numerical investigation of the decomposition of gas hydrates coexisting with gas in natural reservoirs

The problem of methane hydrate decomposition in a reservoir saturated with a gas and hydrate mixture is investigated numerically. The results of the numerical simulation and an analytic solution obtained in the linear approximation are compared. It is shown that for high-permeability rocks the convective heat transfer in the near-well space of the reservoir predominates over the conductive transfer. This makes the use of intra-well heaters ineffective. It is found that an increase in the reservoir and well pressures and a decrease in the permeability suppress the formation of an extended hydrate dissociation region. Critical diagrams of existence of the frontal decomposition regime are constructed.