A leed-aes study of the structure of sulfur monolayers on the Mo(100) crystal face

The formation of ordered phases of sulfur on the molybdenum (100) crystal face has been studied by Low Energy Electron Diffraction (LEED), Auger Electron Spectroscopy (AES) and Thermal Desorption Spectroscopies (TDS). Sulfur was deposited from a S₂ molecular flux streaming out of an Ag₂S containing electrochemical cell inside the UHV chamber. The use of a controlled flux of S₂ allowed the careful determination of saturation values for the monolayer, as well as the formation of multilayers of sulfur. This allowed the calibration of Auger intensities in terms of sulfur coverage. Various ordered structures, c(2 × 2), (1 × 2), $\text{2}\text{1}\text{?}\text{1}\text{1}$ and c(2 × 4), were observed by LEED for different values of the S coverage. Real space models for these structures are proposed that satisfy the coverage values observed and place sulfur atoms only on high symmetry four-fold sites on the (100) molybdenum surface.     

Characterization of oxygen,carbon, and sulfur adlayers on W(211)

Adlayers of oxygen, carbon, and sulfur on W(211) have been characterized by LEED, AES, TPD, and CO adsorption. Oxygen initially adsorbs on the W(211) surface forming p(2 × 1)O and p(1 × 1)O structures. Atomic oxygen is the only desorption product from these surfaces. This initial adsorption selectively inhibits CO dissociation in the CO(β₁) state. Increased oxidation leads to a p(1 × 1)O structure which totally inhibits CO dissociation. Volatile metal oxides desorb from the p(1 × 1)O surface at 1850 K. Oxidation of W(211) at 1200 K leads to reconstruction of the surface and formation of p(1 × n)O LEED patterns, 3 ? n ? 7. The reconstructed surface also inhibits CO dissociation and volatile metal oxides are observed to desorb at 1700 K, as well as at 1850 K. Carburization of the W(211) surface below 1000 K produced no ordered structures. Above 1000 K carburization produces a c(6 × 4)C which is suggested to result from a hexagonal tungsten carbide overlayer. CO dissociation is inhibited on the W(211)?c(6×4)C surface. Sulfur initially orders into a c(2 × 2)S structure on W(211). Increased coverage leads to a c(2×6)S structure and then a complex structure. Adsorbed sulfur reduces CO dissociation on W(211), but even at the highest sulfur coverages CO dissociation was observed. Sulfur was found to desorb as atomic S at 1850 K for sulfur coverages less than $\text{7}\text{6}$ monolayers. At higher sulfur coverages the dimer, S₂, was observed to desorb at 1700 K in addition to atomic sulfur desorption.     

Adsorption of CO on clean and oxygen covered Ni(111) surfaces

Adsorption of CO on Ni(111) surfaces was studied by means of LEED, UPS and thermal desorption spectroscopy. On an initially clean surface adsorbed CO forms a √3 × $\text{√3}\text{R30°}$ structure at θ = 0.33 whose unit cell is continuously compressed with increasing coverage leading to a c4 × 2-structure at θ = 0.5. Beyond this coverage a more weakly bound phase characterized by a $\text{√7}\text{2}$ × $\text{√7}\text{2R19°}$ LEED pattern is formed which is interpreted with a hexagonal close-packed arrangement (θ = 0.57) where all CO molecules are either in “bridge” or in single-site positions with a mutual distance of 3.3 Å. If CO is adsorbed on a surface precovered by oxygen (exhibiting an O 2 × 2 structure) a partially disordered coadsorbate 2 × 2 structure with θ_o = θ_co = 0.25 is formed where the CO adsorption energy is lowered by about 4 kcal/mole due to repulsive interactions. In this case the photoemission spectrum exhibits not a simple superposition of the features arising from the single-component adsorbates (i.e. maxima at 5.5 eV below the Fermi level with O_ad, and at 7.8 (5σ + 1π) and 10.6 eV (4σ) with CO_ad, respectively), but the peak derived from the CO 4σ level is shifted by about 0.3 eV towards higher ionization energies.     

Adsorption of nitrogen on platinum

The adsorption and desorption of nitrogen on a platinum filament have been studied by thermal desorption techniques. Nitrogen adsorption becomes significant only after any carbon contamination is removed from the surface by heating the platinum filament in oxygen, and after the CO content in the background gas is reduced substantially. At room temperature nitrogen populates an atomic tightly bound β-state, E^≠ = 19 kcal mole^?1. The saturation coverage of the (3-state is 4.5 × 10¹⁴ atoms cm^?2. Formation of the (β-state is a zero order process in the pressure range studied. At 90 K two additional α₁- and α₂-desorption peaks are observed. The activation energy for desorption for the α₂-state is 7.4 kcal mole^?1 at low coverage decreasing to 3 kcal mole^?1 at saturation of this state, 6 × 10 molecules cm^?2. The maximum total coverage in the α-states was 1.2 × 10¹⁵ molecules cm^?2. A replacement process between the β- and α-states has been observed where each atom in the (β-state excludes two molecules from the α-state.     

The GaP(001) surface and the adsorption of Cs

GaP(001) cleaned by argon-ion bombardment and annealed at 500°C showed the Ga-stabilized GaP(001)(4 × 2) structure. Only treatment in 10^?5 Torr PH₃ at 500°C gave the P-stabilized GaP(001)(1 × 2) structure. The AES peak ratio $\text{P}\text{Ga}$ is 2 for the (4 × 2) and 3.5 for the (1 × 2) structure. Cs adsorbs with a sticking probability of unity up to 5 × 10¹⁴ Cs atoms cm^?2 and a lower one at higher coverages. The photoemission measured with uv light of 3660 Å showed a maximum at the coverage of 5 × 10¹⁴ atoms cm^?2. Cs adsorbs amorphously at room temperature, but heat treatment gives ordered structures, which are thought to be reconstructed GaP(001) structures induced by Cs. The LEED patterns showed the GaP(001)(1 × 2) Cs structure formed at 180°C for 10 h with a Cs coverage of 5 × 10¹⁴ atoms cm^?2, the GaP(001)(1 × 4) Cs formed at 210°C for 10 hours with a Cs coverage of 2.7 × 10¹⁴ atoms cm^?2, the GaP(001)(7 × 1) and the high temperature GaP(001)(1 × 4), the latter two with very low Cs content. Desorption measurements show three stability regions: (a) between 25–150°C for coverages greater than 5 × 10¹⁴ atoms cm^?2, and an activation energy of 1.2 eV; (b) between 180–200°C with a coverage of 5 × 10¹⁴ atoms cm^?2, and an activation energy of 1.8 eV; (c) between 210–400°C with a coverage of 2.7 × 10¹⁴ atoms cm^?2, and an activation energy of 2.5 eV.     

Surface diffusion of lead on tungsten

Field electron microscopy is used to study the surface diffusion of lead on tungsten. A simple method to measure rough values of the diffusion coefficient and its dependence on sub-monolayer coverage is described and tested. In the region around (001) the displacement energy found is about 1.30 eV/atom up to 10¹⁵ atoms/cm² where it decreases to 0.78 eV/atom. In the residual region except (110) this energy at 1.5×10¹⁴ atoms/cm² is 1.22 eV/atom, it decreases at 4 × 10¹⁴ atoms/cm² to 0.61 eV/atom and increases at 10¹⁵ atoms/cm² to 0.78 eV/atom. Corresponding values of the diffusion coefficient D and of the preexponential D₀ are given. The dependence of D on submonolayer coverage is discussed.     

Hydrogen-induced reconstruction of the W(100) surface,studied by surface core level spectroscopy

We report W(4?) surface core level shifts which yield new information on the energetics of the W(100) (1 × 1) → C(2 × 2)H phase transition. At small hydrogen coverages we find two co-existing surface core levels from atoms on normal lattice sites and from atoms in reconstructed domains. These surface levels are shifted to smaller binding energy (toward E_F) by 0.35 eV and 0.13 eV relative to the bulk level, respectively. The most stable configuration is obtained at a fractional coverage θ_H ? 0.2, at which all surface atoms are shown to be paired with neighboring atoms in the surface plane.     

Work function changes with sulfur coverage on Pt(111)

Work function changes (Δφ) with sulfur coverage have been measured on Pt(111). The sulfur overlayer has been also characterized by LEED, AES and TDS techniques. An unexpected Δφ decrease, which correlates with the growth of a p(2 × 2) structure, has been recorded. At higher sulfur coverage, a reverse in the sign of Δφ has been observed with a $\text{(}\text{3}\text{×}\text{3}\text{)R30 °}$ structure. It is proposed that the recent model of Shustorovich and Baetzold could account for these sulfur-induced Δφ changes. It is also concluded that the sulfur adsorption bond on platinum must be essentially covalent.     

Diffusion and compressibility of sodium on the (110) plane of tungsten

The surface diffusion parameters and the compressibility of sodium on the (110) plane of tungsten have been measured using the field emission fluctuation method for sodium coverages from 0.2 to 3 × 10¹⁴ atoms cm^?2 and for temperatures from 170 to 500 K. Two temperature regimes can be defined. In the high temperature regime (? 300 K) the diffusion is essentially normal with an activation energy ranging from 0.28 to 0.58 eV and a preexponential coefficient D₀ from 10^?8.1 to 10^?2.7 cm² s^?1. In this regime the compressibility increases with temperature indicating an effective repulsive adatoms interaction. In the low temperature regime (? 300 K) the diffusion coefficient decreases with temperature at high coverage and slowly increases with temperature at lower coverage. The transition between both regimes appears on the compressibility versus temperature curve as an inflection point. The comparison of the present results with slow electron diffraction results furnishes strong evidence that the observed transition corresponds to a continuous short-range order-disorder transition.     

The coadsorption of potassium and co on the pt(111) crystal surface: A TDS,HREELS and UPS study

The interaction of CO with a potassium covered Pt(111) surface is investigated using thermal desorption (TDS), high resolution electron energy loss (HREELS) and ultraviolet photoelectron (UPS) spectroscopies. When submonolayer amounts of potassium are preadsorbed, the adsorption energy of CO increases from 25 to 36 kcal/mole, while substantial shifts in the site occupancy from the linear to the bridged site are observed. The CO stretching vibrational frequencies are shown to decrease continuously with either increasing potassium coverage or decreasing CO coverage. A minimum CO stretching frequency of 1400 cm^?1 is observed, indicative of a CO bond order of 1.5. The work function decreases by up to 4.5 eV at submonolayer potassium coverages, but then increases by 1.5 eV upon CO co-adsorption. The results indicate that the large adsorption energy, vibrational frequency and work function changes are due to molecular CO adsorption with a substantial charge donation from potassium through the platinum substrate and into the 2π¹_CO orbital.     

LEED,Auger and work function study of iodine adsorbed on W(110)

The adsorption of iodine on a W(110) surface has been studied by LEED, Auger and work function changes. LEED has revealed several phases which desorb in different temperature regimes and are accordingly designated γ, α, β₁, β₂, and β₃. The γ and α phases exhibited p(2 × 2) and p(2 × 1) surface nets respectively with coherently positioned antiphase boundaries which produced a splitting of selected LEED beams. The separation between the antiphase boundaries of the α phase increased with decreasing coverage. Both the γ and α phases were associated with molecularly absorbed iodine. The three β phases were associated with dissociatively adsorbed iodine which formed chain structures on the surface with the arrangement of iodine atoms within each chain being unique to the particular phase. Continuous changes in coverage then occurred by sheets of these chains shearing to produce packing faults at the resulting shear lines. This shearing process occurred coherently in the β₁ and β₃ phases and incoherently in the β₂ phases. In the former cases, the effect was seen by the continuous movement of coherent LEED beams with changing coverage. A phase diagram was constructed to describe the relative coverages and thermal stability of the phases. The characteristic Auger electron emission of iodine was observed at 495 eV and used to estimate the surface coverage. The work function was found to decrease by 0.4 eV with the adsorption of the first half monolayer and remained unchanged with further adsorption.     

Absolute coverage and isostemc heat of adsorption of deuterium on Pt(111) studied by nuclear microanalysis

The absolute coverage (θ) of deuterium adsorbed on Pt(111) in the ranges 180< T<440 K and 5 × 10^?6 < P < 5 × 10^?2 Pa D₂ has been determined by nuclear microanalysis using the D(³He, p)⁴He reaction. From these data, the isosteric heat of adsorption (E_a) has been determined to be 67 ± 7 kJ mol^?1 at θ ? 0.3. This heat of adsorption yields values of the pre-exponential for desorption (10^?5 to 10^?2 cm² atom^?1 s^?1) that lie much closer to the normal range for a second order process than those determined from previous isosteric heat measurements. The E_a versus θ relationship indicates that the adsorbed D atoms are mobile and that there is a repulsive interaction of 6–8 kJ mol^?1 at nearest neighbour distances. At 300 K the coverage decreases to ? 0.05 monolayer (? 8 × 10¹³ D atoms cm^?2) as P→ 0, apparently invalidating a recent model of site exchange in the adsorbed layer.     

TDS and LEED studies of H2O adsorption on GaAs(110)

The UHV cleaved (110) face has been exposed to water in the range from 10 L to 2 × 10⁴ L. The main TDS peak in H₂O desorption appears at 350 K, independent of coverage. The low desorption energy of 0.7 eV (16 kcal/mol) is reasonable for oxygen atoms bound via the lone pair orbital to As as was earlier derived from UPS measurements. A broad spur between 450 and 600 K may be related to O-Ga bonds. The sticking probability shows values below 10^-4; only near 4.8 × 10³ L (6 × 10¹⁵ cm^-2 s^-1 H₂O molecules for 300 s) corresponding to a coverage of about 0.4 monolayes a steep maximum appears. At about one monolayer saturation is observed. Exposures to more than 10⁴ L of water quench the intensity of the (10) LEED spot considerably stronger than the intensity of the (11) spot. A comparison of the I(E) curves with existing model calculations suggests that the observed behaviour of the LEED spots is caused by a change in surface structure towards the unrelaxed configuration. The higher sticking coefficient observed near 0.4 monolayers may be connected with this rearrangement of surface atoms.     

Low temperature ordering of sodium overlayers on RU(001)

The adsorption of alkali metals on transition metals can produce several technologically important effects, but only limited results have been reported on the geometrical structure of such adlayers, especially for adsorption temperatures below 300 K. We have examined the adsorption of Na on Ru(001) as a function of coverage and temperature using LEED to determine the adlayer structure and thermal desorption spectroscopy to characterize binding kinetics and relative Na coverages. The only Na LEED pattern observed following adsorption at 300 K was that of $\text{(}\text{3}\text{2}\text{×}\text{3}\text{2}\text{)}$ structure which occurred near saturation of the first layer. However, Na adsorbed at 80 K produces a progression of distinct, ordered LEED patterns with increasing coverage which does not include the $\text{(}\text{3}\text{2}\text{×}\text{3}\text{2}\text{)}$ pattern. These patterns result from increasingly compressed, hexagonal arrangements of adsorbate atoms which are uniformly spaced due to mutually repulsive interactions. The order-disorder transition temperature for each structure was also determined by LEED and used to develop a 2D phase diagram for Na on Ru(001). Ordered structures were observed only when Na thermally induced motion was sufficiently limited and the repulsive Na-Na interaction could force the uniform spacing of Na atoms. Thus, low coverage structures only developed where Na mobility was limited by low temperature. High coverage structures were stable to much higher temperatures since motion was inhibited by the high Na density.     

The effect of sulfur on co adsorption/desorption on Pt(S)-[9(111) × (100)]

CO adsorption/desorption on clean and sulfur covered Pt(S)-[9(111) × (100)] surfaces was studied using AES, TPD, and modulated beam experiments. CO desorption occurred from two states on the clean surface — a low temperature state associated with the (111) terraces and a high temperature state associated with the steps/defects. Thermal desorption results indicated that above small CO coverages conversion from the low temperature state into the high temperature state was activated and that back conversion was slow. Sulfur preferentially adsorbed at step/defect sites and decreased the population of the high temperature desorption state. Modulated beam experiments were performed in order to determine CO adsorption/desorption parameters as a function of sulfur coverage on the Pt crystal. The sticking coefficient and binding energy of CO decreased as the sulfur concentration increased. Sulfur adsorption at step/defect sites decreased the CO sticking coefficient only slightly but increased the effective rate constant for CO desorption significantly. Sulfur adsorption on the terraces affected CO adosrption more than sulfur at step sites. On the clean surface the effective rate constant for CO desorption was

$\text{1 × 10}{}^{15}\text{s}{}^{\mathrm{?1}}\text{exp (}\text{?36.2 kcal/mole}\text{RT}\text{)}$

Desorption occurred from both terrace and step/defect sites, but the kinetics were characteristic of the step/defect sites. For the surface on which step/defect sites were blocked by sulfur the effective desorption rate constant was

$\text{k}{}_{\mathrm{eff}}\text{= 1 × 10}{}^{13}\text{s}{}^{\mathrm{?1}}\text{exp (?}\text{27.5 kcal/mole}\text{RT}\text{)}$

indicating an appreciable decrease in CO binding on the terraces, though sulfur-CO repulsive interactions had probably made k_eff larger than the true rate constant for desorption from clean (111) planes. The results showed clearly a compensation effect in activation energy and preexponential factor.     

A study of the adsorption of oxygen on Ni(111) using auger electron spectroscopy: Chemical shifts and valence spectra

Auger electron spectra have been recorded when oxygen is adsorbed on a Ni(111) single crystal surface. For the coverage range θ < 1, an analysis of the plot of the peak to peak height (H) of the oxygen KVV (516 eV) transition versus the total number of molecules cm^2? impinging on the surface (molecular beam dosing) shows agreement with the kinetic mechanism proposed by Morgan and King [Surface Sci. 23 (1970) 259] for the adsorption of oxygen on polycrystalline nickel films. In this coverage range, no energy shifts of the nickel or oxygen Auger peaks were recorded.At coverages θ > 1 (standard dosing procedure) shifts in the valence spectra M_{2, 3}VV (61 eV) and L₃M_{2, 3}V (782 eV) of ?2.3 eV and ?1.8eV respectively are recorded at 1.4 × 10^?2 torr-sec. Up to these coverages no shift of the L₃VV transition (849 eV) is observed. A chemical shift of ?2.1 eV is recorded in the L₃M_{2, 3}M_{2, 3} Auger transition (716 eV) at 1.4 × 10^?2 torr-sec.In the coverage range θ > 1, shifts in the energy of the oxygen Auger peaks are observed. At 5.8 × 10^?3 torr-sec. the KVV (516 eV) and KL₁V (495.2 ± 0.3 eV) transitions show shifts of ?1.5 eV and ?(1.0 ±0.3) eV respectively. No shift up to this coverage is recorded in the KL₁L₁ (480.6 ± 0.3 eV) transition.     

Dangling bond surface state of Si(111): New results

By angle resolved photoemission on Si(111) 2 × 1 surfaces, the main surface structure at ?0.85 eV below E_F is shown to exhibit a strong s?p_z character in contradiction with previous measurements. The similarity of the results on the 2 × 1 and 7 × 7 surfaces, together with theoretical calculations lead us to favor a buckled model for the 2 × 1 surface and a model based on ring like arrangements of lowered and raised atoms for the 7 × 7 surface.     

The adsorption of CO,O2, and H2 on Pt: II. Ultraviolet photoelectron spectroscopy studies

Ultraviolet photoelectron spectroscopy (UPS) has been used to study the chemisorption of CO, O₂, and H₂ on platinum. Three single crystal surfaces ((111), 6(111) × (100), and 6(111) × (111)) and two polycrystalline surfaces were studied. These studies yielded three important results. First, the most dominant change in the Pt valence band upon gas adsorption was a decrease in the height of the peak immediately below the Fermi level. This decrease was nearly identical for all three gases studied. Second, CO adsorption resulted in the formation of a resonance state ～8 eV below the Fermi level which was attributed to CO molecular orbitals. In contrast, no dominant resonance states were observed for adsorbed O or H. The lack of an O resonance state on platinum is in contrast to the results observed for O adsorbed on Fe and Ni and suggests important differences between the OPt chemisorption bond and the OFe and ONi chemisorption bonds. Finally, adsorption of CO at steps or defects led to a decrease in work function while its adsorption on terraces led to an increase in work function. For H, adsorption at steps led to an increase in work function while adsorption on terraces led to a decrease in work function. The adsorption of O led to an increase in work function on all of the surfaces studied.     

The role of adsorbed sulfur in the H2D2 equilibration reaction on Pt single crystals

The H₂D₂ equilibration on Pt single crystals was investigated under intermediate pressure (100–400 Torr) and temperature (50–250°C), as a function of sulfur coverage. On Pt(110) and Pt(111), adsorbed sulfur modifies the kinetic parameters, activation energy and pre-exponential factor; the latter depends on the temperature on Pt(110) only. The clean Pt(110) face was found to be 5 times more active than the clean Pt(111). On both faces, adsorption of sulfur induces electronic effects on the neighbouring reactional sites. The difference in the behaviour of the two faces and a clear influence of the arrangement of the adsorbed sulfur atoms, deduced from LEED diagrams, tend to prove the structure dependency of the H₂D₂ reaction. A consistent reaction mechanism could be proposed, involving the dissociative adsorption and surface recombination of hydrogen and deuterium, and the reaction between adsorbed molecules for high sulfur coverages. The value of the sulfur coverage which makes the platinum inactive towards H₂D₂ is lower for the (111) than for the (110) orientation; this is in correlation with the roughness of the surface; the denser at atomic scale a surface is, the further is the extent of the lateral interactions due to adsorbed sulfur.     

Core level photoemission study of the adsorption of iodine on Ni{100}

Synchrotron radiation photoemission from the Ni 3p and I 4d core levels has been studied for iodine adsorbed on Ni{100} in a range of different phases. In the range of chemisorbed structures involving overlayer compression from coverages θ of about 0.3 to 0.4 the I 4d photoemission binding energies decrease by ~0.3 eV, while further compression to a c(2 × 2) structure leads to a further decrease by ~0.4 eV. Low temperature adsorption of molecular iodine shows a binding energy of 0.1 eV lower still. In the chemisorbed coverage range these core level shifts are found to be substantially less than the I-I repulsive energy interactions and are associated with the through-metal component of this interaction, while the residual component concealed from the photoemission experiments is attributed to through-space overlap interaction. Other processes which may contribute to the observed binding energy shifts, including Coulomb interactions in both initial and final states, are discussed in some detail.