Activity of Candida rugosa lipase immobilized on gamma-Fe2O3 magnetic nanoparticles

We report the stability and enzymatic activity of Candida rugosa Lipase (E.C.3.1.1.3) immobilized on gamma-Fe2O3 magnetic nanoparticles. The immobilization strategies were either reacting the enzyme amine group with a nanoparticle surface acetyl, or amine groups. In the former, the enzyme was attached through a C=N bond, while in the latter it was connected using glutaraldehyde. AFM images show an average particle size of 20 +/- 10 nm after deconvolution. The enzymatic activity of the immobilized lipase was determined by following the ester cleavage of p-nitrophenol butyrate. The covalently immobilized enzyme was stabile and reactive over 30 days.     

Synthesis of thermosensitive microgels with a tunable magnetic core

In this work, we describe a new methodology for the preparation of monodisperse and thermosensitive microgels with magnetic core. In order to produce such a material, hydrophobic magnetic Fe(3)O(4) nanoparticles were prepared by two methods: thermal decomposition and coprecipitation. The surface of these nanoparticles was modified by addition of 3-butenoic acid, and after that these nanoparticles were dispersed in water and submitted to free radical polymerization at 70 °C in the presence of N-isopropylacrylamide (NIPAM) and bisacrylamide. The result of this reaction was monodisperse microgels with a magnetic core. By varying the amount of 3-butenoic acid, it was possible to obtain hybrid microgels with different magnetic core sizes and different architectures.     

Fe3O4 and gamma-Fe2O3 nanoparticles for the adsorption of Co2+ from aqueous solution

The adsorption of Co2+ ions from nitrate solutions using iron oxide nanoparticles of magnetite (Fe3O4) and maghemite (gamma-Fe2O3) has been studied. The adsorption of Co2+ ions on the surface of the particles was investigated under different conditions of oxide content, contact time, solution pH, and initial Co2+ ion concentration. It has been found that the equilibrium can be attained in less than 5 min. The maximum loading capacity of Fe3O4 and gamma-Fe2O3 nanoparticles is 5.8 x 10(-5) and 3.7 x 10(-5) mol m(-2), respectively, which are much higher than the previously studied, iron oxides and conventional ion exchange resins. Co2+ ions were also recovered by dilute nitric acid from the loaded gamma-Fe2O3 and Fe3O4 with an efficiency of 86 and 30%, respectively. That has been explained by the different mechanisms by including both the surface and structural loadings of Co2+ ions. The surface adsorption of Co2+ on Fe3O4 and gamma-Fe2O3 nanoparticles has been found to have the same mechanism of ion exchange reaction between Co2+ in the solution and proton bonded on the particle surface. The conditional equilibrium constants of surface adsorption of Co2+ on Fe3O4 and gamma-Fe2O3 nanoparticles have been determined to be log K=-3.3+/-0.3 and -3.1+/-0.2, respectively. The structural loading of Co2+ ions into Fe3O4 lattice has been found to be the ion exchange reaction between Co2+ and Fe2+ while that into gamma-Fe2O3 lattice to fill its vacancy. The effect of temperature on the adsorption of Co2+ was also investigated, and the value of enthalpy change was determined to be 19 kJ mol(-1).     

Superparamagnetic gamma-Fe(2)O(3) nanoparticles with tailored functionality for protein separation

Polymer coated superparamagnetic gamma-Fe(2)O(3) nanoparticles were derivatized with a synthetic double-stranded RNA [poly(IC)], a known allosteric activator of the latent (2-5)A synthetase, to separate a single 35 kDa protein from a crude extract which cross reacted with antibodies raised against the sponge enzyme.     

Synthesis of ordered mesoporous Fe3O4 and gamma-Fe2O3 with crystalline walls using post-template reduction/oxidation

Ordered mesoporous Fe(3)O(4) with crystalline walls (inverse spinel structure) has been synthesized for the first time, representing to the best of our knowledge, the first synthesis of a reduced mesoporous iron oxide. Synthesis was achieved by reducing ordered mesoporous alpha-Fe(2)O(3) (corundum structure) to Fe(3)O(4) spinel then to gamma-Fe(2)O(3) by oxidation, while preserving the ordered mesostructure and crystalline walls throughout. Such solid/solid transformations demonstrate the stability of the mesostructure to structural phase transitions from the hexagonal close packed oxide subarray of alpha-Fe(2)O(3) (corundum structure) to the cubic close packed subarray of Fe(3)O(4) spinel and gamma-Fe(2)O(3). Preliminary magnetic measurements reveal that the spins in both Fe(3)O(4) and gamma-Fe(2)O(3) are frozen at 295 K, despite the wall thickness (7 nm) being less than the lower limit for such freezing in corresponding nanoparticles (>8 nm).     

Conversion of anisotropically phase-segregated Pd/gamma-Fe2O3 nanoparticles into exchange-coupled fct-FePd/alpha-Fe nanocomposite magnets

Exchange-coupled fct-FePd/alpha-Fe nanocomposite magnets were fabricated by converting anisotropically phase-segregated Pd/gamma-Fe2O3 nanoparticles via the interfacial atom diffusion. The magnetically hard fct-FePd phases formed by the interdiffusion between alpha-Fe and fcc-Pd phases nearly preserve their sizes at the nanometer scale because they are surrounded by the alpha-Fe matrix. The VSM measurements reveal that the exchange coupling between the soft and hard phases has been realized.     

One-step synthesis of core(Cr)/shell(gamma-Fe(2)O(3)) nanoparticles

Core(Cr)/shell(gamma-Fe(2)O(3)) nanoparticles were synthesized by mixing Fe(CO)(5) and Cr(CO)(6) in the 9:1 ratio. These particles exhibit narrow size distribution with 13.5 nm as mean diameter and uniform spherical shape. The TEM image, which is in good agreement with the synchrotron powder XRD pattern, reveals the heterogeneous nature (core/shell structure). The analysis of the pattern reveals gamma-Fe(2)O(3) structure and a metal crystal structure. Mossbauer spectra, which support the superparamagnetic behavior determined by H-M measurement, do not show any traceable amount of Fe(0). This suggests that the metal component is Cr. EELS analysis and iron mapping suggest controlled stoichiometry and also confirm a core made of Cr and a shell made of gamma-Fe(2)O(3).     

Synthesis of alkyl sulfonate/alcohol-protected gamma-Fe(2)O(3) nanocrystals with narrow size distributions

Highly crystalline gamma-Fe(2)O(3) nanoparticles with narrow size distributions that are coated with 1-undecanesulfonic acid were synthesized via two distinct approaches using oxidation and site-exchange reactions. However, similar nanocrystals protected with 1-octanol could only be achieved via the site-exchange method, while the oxidation approach led to Fe(2)O(3) nanoparticles of poor crystallinity and size uniformity. Our magnetization measurements confirmed the superparamagnetic nature of our Fe(2)O(3) nanoparticle products and the effects of the coating materials on magnetization properties.     

Hydrolysis and amine-capping in a glycol solvent as a route to soluble maghemite gamma-Fe2O3 nanoparticles

The preparation of capped metal oxide nanoparticles through the hydrolysis of metal salts is made arduous by the difficulty of dissolving long organic chain capping agents in water; by performing the reaction in propylene glycol under reflux, instead of water, we are able to hydrolyse FeCl3 in the presence of n-octylamine to obtain (repeatedly) soluble, monodisperse approximately 5 nm gamma-Fe2O3 particles that display a tendency to aggregate into superlattices.     

Synthesis of nonspherical superparamagnetic particles: in situ coprecipitation of magnetic nanoparticles in microgels prepared by stop-flow lithography

We present the synthesis of nonspherical magnetic microparticles with multiple functionalities, shapes, and chemistries. Particle synthesis was performed in two steps: polymeric microparticles functionalized homogenously with carboxyl groups were generated using stop-flow lithography, and then in situ coprecipitation was used to grow magnetic nanoparticles at these carboxyl sites. With successive growth of magnetic nanoparticles, we obtained polymeric particles with saturation magnetizations of up to 42 emu/g microparticle. The growth in the magnetic nanoparticle mean size and polydispersity was determined from the magnetization curves obtained following each growth cycle; nanoparticle sizes were limited by the physical constraint of the effective mesh within the hosting gel microparticle. Particles with spatially segregated domains of varying magnetic properties (e.g., Janus particles, particles with step changes in magnetite concentration, etc.) can be synthesized readily using this approach.     

Doping gamma-Fe(2)O(3) nanoparticles with Mn(III) suppresses the transition to the alpha-Fe(2)O(3) structure

Here we report on a mixed oxide system, gamma-Fe2O3 nanoparticles doped with Mn(III), where the transition from the cubic to the more stable hexagonal alpha-Fe2O3 structure is suppressed. When amorphous Fe2O3 is heated at 300 degrees C for 3 h, ferrimagnetic gamma-Fe2O3 is observed as the sole product. On the other hand, when the temperature is raised to 500 degrees C, one observes only antiferromagnetic alpha-Fe2O3 as the product. However, upon doping with 8.5 wt % Mn(III), the amorphous nanoparticles crystallized to mainly the gamma-Fe2O3 matrix after heating at 500 degrees C for 3 h, and need to be heated to >650 degrees C for the complete transition to the alpha-Fe2O3 structure to take place.     

Synthesis,characterization and application of Cr2O3 nanoparticles as an efficient antibacterial agent

This study focuses on the microwave-assisted synthesis of Cr₂O₃ nanoparticles for the development of antibacterial materials. Characterization techniques including FT-IR spectroscopy, UV–vis spectroscopy, SEM-EDX, and XRD, were employed to analyze the nanoparticles' properties. The antibacterial efficacy against E. coli, S. aureus, B. subtilis, and P. aeruginosa was evaluated, with significant activity observed against all pathogens, highlighting their potential as antibacterial materials. The novelty of this study lies in the synthesis of Cr₂O₃ nanoparticles and their application as potent antibacterial agents against various pathogens. The results of XRD study concludes the average size of Cr₂O₃ nanoparticles as 49.96 nm. The synthesized Cr₂O₃ nanoparticles demonstrated a good zone of inhibition against E. coli (22 mm), S. aureus (19 mm), B. subtilis (18 mm), and P. aeruginosa (21 mm). The findings of the study suggest that Cr₂O₃NPs have potential as a novel antibacterial agent, and further research in this area could lead to the development of new and effective treatments for bacterial infections.     

Synthesis and characterization of Co3O4 nanoparticles by a simple method

Using solid complex molecular precursor [bis(salicylaldehyde)ethylenediiminecobalt(II)], [Co(salen)], a simple and surfactant-free method to synthesize Co₃O₄ nanoparticles was proposed. Cubic-phase Co₃O₄ nanoparticles of size 30–50-nm could be produced by thermal treatment of the Co(salen) in the air at 500 °C for 5 h. The as-prepared samples were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The optical absorption spectrum indicates that the direct band gaps of Co₃O₄ nanoparticles are 1.53 and 2.02 eV. The optical property test indicates that the absorption peak of the nanoparticles shifts towards short wavelengths, and the blue shift phenomenon might be ascribed to the quantum effect. The hysteresis loops of the obtained samples reveal their ferromagnetic behavior, an enhanced coercivity (H_c) and a decreased saturation magnetization (M_s) as compared to their respective bulk materials.     

Synthesis of superparamagnetic GdFeO3 nanoparticles using a free impinging-jets microreactor

Russian Chemical Bulletin - Gadolinium orthoferrite GdFeO3 nanoparticles were synthesized by co-precipitation of gadolinium and iron(m) hydroxides in a free impinging-jets microreactor followed by...     

Preparation of thermosensitive PNIPAM microcontainers and a versatile method to fabricate PNIPAM shell on particles with silica surface

Thermosensitive PNIPAM microcontainers were prepared by using silica particles as template. Silica particles were prepared by the St?ber method and surface modified with linear P(NIPAM-co-MPS) chains. PNIPAM shell was then fabricated on the P(NIPAM-co-MPS)-modified silica particles through precipitation polymerization of NIPAM and MBA. Finally, PNIPAM microcontainers were obtained by removing the silica cores with NaOH. The materials were characterized by TEM, FTIR, GPC, and DLS. The PNIPAM microcontainers exhibit good thermosensitivity. The method to fabricate thermosensitive PNIPAM shell can be generalized to a versatile method for preparing PNIPAM shell on particles with silica surface, which includes surface modification with P(NIPAM-co-MPS) and precipitation polymerization of NIPAM and MBA using the modified particles as seed. Through this method, PNIPAM shell was successfully fabricated on iron oxide/silica nanostructures with a wormlike shape and relatively large size, which demonstrates the versatility of the method.