Extraction of copper ions using silica gel with chemically modified surface

The applicability of silica gels for the application in solid-phase extraction was tested. Silica was modified with ketoimine groups. Surface characteristics of the modified silica were determined by elemental analysis, NMR spectra of solid phases (²⁹Si CP MAS NMR), analysis of pore size distribution of the silica support, and nitrogen adsorption-desorption. Newly proposed sorbents with ketoimine groups were applied in the preconcentration of trace amounts of the Cu (II) ions from lake water, post-industrial water, and demineralized water unburdened back to the lake. Presented at the 34th International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 21–25 May 2007.     

Extraction of metal ions using chemically modified silica gel: a PIXE analysis

Organic ligand with carboxyhydrazide functional group was immobilised on the surface of silica gel and the metal binding capacity of the ligand-embedded silica was investigated. The functional group was covalently bonded to the silica matrix through a spacer of methylene groups by sequential reactions of silica gel with dibromobutane, malonic ester and hydrazine in different media. Surface area value of the modified silica was determined. The changes in surface area were correlated with the structural change of the silica surface due to chemical modifications. A mixture solution of metal ions [K(I),Cr(III),Co(II),Ni(II),Cu(II),Zn(II),Hg(II) and U(VI)] was treated with the ligand-embedded silica in 10(-3) M aqueous solution. The measurement of metal extraction capacity of the silica based ligand was done by multielemental analysis of the metal complexes thus formed by using Proton Induced X-ray Emission (PIXE) technique.     

Reverse microemulsion-mediated synthesis of silica-coated gold and silver nanoparticles

A reverse microemulsion method is reported for preparing monodispersed silica-coated gold (or silver) nanoparticles without the use of a silane coupling agent or polymer as the surface primer. This method enables a fine control of the silica shell thickness with nanometer precision. As compared to the St?ber method reported for direct silica coating, which can only coat large gold particles ( approximately 50 nm in diameter) at low concentrations (<1.5 x 10(10) particles/mL), this new approach is capable of coating gold particles of a wide range of sizes (from 10 to 50 nm) at a much higher concentration ( approximately 1.5 x 10(13) particles/mL). Moreover, it enables straightforward surface functionalization via co-condensation between tetraethyl orthosilicate and another silane with the desired functional groups. The functional groups introduced by this method are readily accessible and thus useful for various applications.     

Regularities of the retention of aminopyridines by silica gel modified with gold nanoparticles

New sorbents based on silica gel and gold nanoparticles stabilized by L-cysteine and its methyl ester are synthesized. Regularities of the retention of various substituted aminopyridines by the synthesized sorbents are examined in the normal-phase mode of high-performance liquid chromatography upon elution by a binary mobile phase (hexane-isopropanol). Quantum-chemical simulations of L-cysteine and its derivative adsorptions on the surface of a gold cluster are performed, along with simulations of subsequent adsorptions of substituted pyridines on the modified gold surface. It is shown that the Snyder-Soczewinski and Scott-Kucera displacement models can be used to describe the experimental data on the synthesized sorbents.     

Additional purification of alkali or alkaline earth salts by using silica gel modified with pyrocatechol violet as a sorbent

Sorption of 14 metal ions on silica gel impregnated with a mixture of Aliquat 336 and Pyrocatechol Violet was investigated. It was found that alkali metals and calcium are not retained on the sorbent, magnesium is retained from solutions of pH > 6, contrary to other metal ions. The sorbent was used for purification of some salts from trace amounts of heavy metals and magnesium. Some metals ion mixtures have also been separated by using column extraction chromatography stepwise elution with perchloric acid solutions.     

Dye-concentrated organically modified silica nanoparticles as a ratiometric fluorescent pH probe by one- and two-photon excitation

Basic dye-concentrated nanoparticles (approximately 33 nm in diameter) show fluorescence-based ratiometric pH response, by one- and two-photon excitations, with improved proton sensing ability (pKa approximately 6.4) through nanoscopic intraparticle energy transfer.     

Sorption recovery of metal ions using silica gel modified with salicylaldoxime

Trace metals in water were preconcentrated with silica gel modified with salicylaldoxime and determined by AAS. Optimum conditions for the maximum recovery of metal ions, viz. Cu(II), Ni(II), Co(II), Zn(II) and Fe(III), for both batch and column methods were developed. The efficiency of the adsorbent with respect to different experimental conditions was established.     

Surfactant assisted enrichment of nucleosides by using a sorbent consisting of magnetic polysulfone capsules and mesoporous silica nanoparticles modified with phenylboronic acid

Microchimica Acta - Boronate affinity materials have been widely used for selective extraction of cis-diols, but their extraction efficiency is far from adequate. We have synthesized porous...     

Sorption-spectrometric determination of palladium and gold using silica chemically modified with dipropyl disulfide groups

It has been found that silica chemically modified with dipropyl disulfide groups (DPDSS) quantitatively extracts palladium(II) from solutions in the acidity range from 4 M HCl to pH 4 and gold(III) in the range from 1 M HCl to pH 2 with a partition coefficient at the level of n × 10⁴ cm³/g. The adsorption of palladium(II) and gold(III) at room temperature is highly selective, whereas non-ferrous and other platinum metals are not adsorbed. Sorption-atomic absorption, sorption-ICP-atomic emission, and sorption-photometric methods for the determination of palladium and gold have been developed using DPDSS. The accuracy of the methods was tested by the analysis of certified reference samples.     

Silica gel modified with Eriochrome Blue SE as a sorbent in trace analysis for metal ions

The sorption of 14 metal ions on silica gel impregnated with a mixture of Aliquat 336 and Eriochrome Blue SE was investigated. It was found that the sorption behaviour depends upon the species and the pH of the loading solution. Alkali metal ions were not retained under any of the investigated conditions. The retained metal ions can be eluted with dilute solutions of hydrochloric or perchloric acid without significant elution of the chelating reagent from the sorbent. The sorbent was used for the separation of metal ion mixtures by column — extraction chromatography and for additional purification of some salt solutions from trace amounts of Zn, Cd, Pb and Cu. The effectiveness of purification was confirmed by anodic stripping voltammetry.     

Functionalized gold nanoparticles as nanosensor for sensitive and selective detection of silver ions and silver nanoparticles by surface-enhanced Raman scattering

We have developed a surface-enhanced Raman scattering (SERS) nanosensor firstly for Ag ions and Ag nanoparticles detection based on 2-mercaptoisonicotinic acid (2MNA)-functionalized Au nanoparticles. Ag(+) can coordinate with 2MNA resutling in a variation of its SERS spectrum, which is used as a criterion to determine Ag(+) in a solution. This sensor exhibits a detection limit no more than 25 nM and has a high selectivity against other metal ions. More importantly, it can be directly applied in real sample detection.     

Low-temperature sorption-luminescence determination of silver using silica gel chemically modified with mercaptopropyl groups

Silica gel chemically modified with mercaptopropyl groups extracts silver(I) from solutions in the acidity ranges from 4 M HNO₃ to pH 8 and from 0.01 M HCl to pH 7. The time it takes to attain a sorption equilibrium is no more than 2 min; distribution coefficient is 1 × 10⁵ cm³/g. Yellow-orange luminescence was produced in the adsorbent phase upon the UV irradiation of wet adsorbates cooled to the liquid-nitrogen temperature (77 K). This effect was used for the development of a procedure for the low-temperature sorption-luminescence determination of silver. The calibration graph was linear in the range 1–80 µg Ag per 0.1 g of adsorbent. The detection limit was 0.05 µg per 0.02 g of adsorbent. The relative standard deviation was no more than 6% for silver amounts higher than 5 µg.__________Translated from Zhurnal Analiticheskoi Khimii, Vol. 60, No. 4, 2005, pp. 390–393.Original Russian Text Copyright © 2005 by Losev, Elsuf ev, Trofimchuk.     

Enzymeless determination of cholesterol using gold and silver nanoparticles as electrocatalysts

We present the results of synthesis and study of the electrocatalytic activity of gold and silver nanoparticles of different composition (individual metals, core–shell particles, nanoalloys, and particles synthesized electrochemically), immobilized on the surface of a glassy carbon electrode, with respect to cholesterol. A surfactant (cetyltrimethylammonium bromide) is selected to create an aqueous–organic emulsion of cholesterol. It is demonstrated that nanoparticles with a gold core and a silver shell with the regression equation of I = 1.4 × 10^–5 c _chol + 5.8 × 10^–5 (R ² = 0.97) and silver nanoparticles synthesized electrochemically with the regression equation of I = 1.0 × 10^–5 c _chol + 3.0 × 10^–4 (R ² = 0.95) possess optimal electrocatalytic characteristics.     

Potentiometric study using chemically modified silica gel with pyridinium as membrane for ClO 4 − ions

A potentiometric sensor for the perchlorate anion was developed by mixing chemically modified silicagel with pyridinium perchlorate, with an epoxy polymer and graphite. The electrode showed Nernstian response between 1.0 × 10^–2 and 1.0 × 10^–3 M perchlorate concentrations. The electrode showed high selectivity to this ion at solutions pH between 5.5 and 8.0. The presence of IO ₄ ^– , NO ₃ ^– ,Br^–, IO ₃ ^– , Cl^– and SO ₄ ^2– ions in the solutions, had only small interference in the electrode response in the range mentioned.     

HPLC separation of nitrogen-containing compounds on silica gel modified with gold nanoparticles stabilized by chitosan

The potentialities of using silica gel modified with gold nanoparticles stabilized by chitosan are evaluated in the normal phase of HPLC as an example of the separation of aniline and pyridine derivatives, as well as triazole fungicides by elution with mixtures of hexane with isopropyl alcohol, isobutanol, or chloroform. The influence of the nature and content of the polar additive on the efficiency and separation selectivity of the column have been studied. The possibility of separating mixtures containing penconazole, propiconazole, diniconazole, difenoconazole, and aminopyridines is shown.     

Immobilized silver nanoparticles on silica gel as an efficient catalyst in nitroarene reduction

<正>Nanoparticles have properties that can be fine-tuned by their size as well as shape.Hence,there is significant current interest in preparing nano-materials of small size dispersity and to arrange them in close-packed aggregates.This letter describes a way of synthesising silver nanoparticles and their protection to aggregate by silica gel.The combination of catalytic quantities of immobilized silver nanoparticles with reductive ability of NaBH_4 efficiently reduces aromatic nitroarenes to the corresponding amines in aqueous medium.Noteworthy is that highly chemoselective reactions were achieved in the presence of other functional groups such as halogen and carboxylic acid groups.The silver particles immobilized on silica gel are stable in the presence of oxygen for several months.     

有机修饰氧化硅对抗紫外纳米ZnO的原位表面修饰

以正硅酸乙酯和二甲基二乙氧基硅烷作为共前驱体,通过溶胶-凝胶反应得到有机修饰氧化硅;用有机修饰氧化硅对碱式碳酸锌进行原位表面改性,通过对表面改性碱式碳酸锌进行热处理得到表面改性纳米ZnO;分析了表面改性纳米ZnO的结构和性能.结果表明,经有机修饰氧化硅改性处理的纳米ZnO具有强憎水性,与有机相的相容性较强,光催化活性得...     

Synthesis of palladium nanoparticles on organically modified silica: Application to design of a solid-state electrochemiluminescence sensor for highly sensitive determination of imipramine

Organically modified silica substrate containing amine and vinyl functional groups were used for reduction and stabilization of palladium nanoparticles. Uniform spherical nanoparticles of palladium with average diameter of 10 nm were formed on silica substrate by direct contact of the substrate with an aqueous solution of palladium precursor, without the addition of any chemical reducer. Moreover, a sensitive and selective solid state electrochemiluminescence sensor was fabricated for the determination of imipramine, based on Ru(bpy)₃²⁺-palladium nanoparticles doped carbon ionic liquid electrode. In this process, imipramine acts as a co-reactant for Ru(bpy)₃²⁺. It is believed that the enhancement of the electrochemiluminescence signal in the presence of palladium nanoparticles in the composite is due to palladium catalytic effect on electrochemical and also chemical process involved in formation of Ru(byp)₃²⁺*. In addition, the results confirmed that, the rigid composite electrode shows the characteristic of microelectrode arrays. The proposed method was applied to the determination of imipramine in tablets and urine samples. The electrochemiluminescence intensity showed good linearity with the imipramine concentration from 1–100 pM, with a detection limit of 0.1 pM.