Assessment on in vitro medicinal properties and chemical composition analysis of Solanum virginianum dried fruits

The study was aimed to screen the presence of phytoconstituents and determine distinct in vitro medicinal traits of aqueous and ethanolic extracts of Solanum virginianum dried fruits. Aqueous and ethanolic extract showed total phenolic content of 207.5 ± 0.16 and 268.4 ± 0.42 GAE/mg, respectively. Likewise, total flavonoid content of 50.12 ± 0.39 and 192.88 ± 0.27 QE/mg was estimated for the aqueous and ethanolic extract, respectively. In vitro antibacterial, antioxidant, α-amylase inhibition, anti-inflammatory, and anticancer attributes of extracts were assessed using standard protocols. The antibacterial traits of both the extracts were assessed against certain pathogenic bacteria which exhibited maximum zone of inhibition of 22.3 ± 0.6 mm against Staphylococcus aureus. Antioxidant tests showed not only significant scavenging of DPPH, superoxide, hydroxyl, and ABTS^●+ radicals but also estimated ferric reducing power and phosphomolybdenum reduction activities of extracts in a concentration dependent manner. The aqueous extract (54.12 ± 0.44–86.80 ± 0.27%) depicted higher rate of α-amylase inhibition than ethanolic extract (23.07 ± 0.47–81.61 ± 0.43%) at distinct concentrations. Similarly, the aqueous extract protected the haemolysis (46.19 ± 0.14–66.21 ± 0.17%) effectively as compared to the ethanolic extract (12.67 ± 0.19–38.03 ± 0.41%). The aqueous and ethanolic extract showed cytotoxicity against HepG2 cell lines in the range of 32.23 ± 0.34–54.82 ± 0.26% and 49.25 ± 0.38–73.2 ± 0.3%, respectively. Additionally, the GC–MS analysis confirmed the availability of total 15 predominant bioactive constituents in both extracts. Findings of this context indicated pronounced applications of S. virginianum fruits as future therapeutic.     

Determination of elemental composition of atmospheric aerosol in the urban area of Islamabad, Pakistan

Summary This study provides useful information about the level and chemical composition of particulate matter and about the possible sources of the aerosol pollutant in Islamabad, the capital of Pakistan. Atmospheric aerosol samples were collected during winter (January and February) 1995, from two locations of Islamabad, namely of Sector F-7 and Sector I-9. Twenty-four elements were detected by using thermal neutron activation analysis (NAA) and atomic absorption spectrometry (AAS). The concentration of total suspended particulates (TSP) in the area around the industrial sector (I-9) was found to be more than twice higher (297 μg/m³) than in the Sector F-7 (133 μg/m³). The enrichment factor analysis revealed Zn, As, Br, Sb, I and Pb, originated mainly from anthropogenic sources. The elemental ratio analysis indicated that both Sectors I-9 and F-7 are under the influence of coal burning processes whereas transportation is responsible for the toxic pollutants Pb and Br. The present results were discussed and compared with those of the literature. The results may also serve as base line level as this work employed samples collected in 1995 and many of the air environmental change factors occurred after the sampling year.     

Study of polyethylene glycol as a green solvent in the microwave-assisted extraction of flavone and coumarin compounds from medicinal plants

In this paper, the application of polyethylene glycol (PEG) aqueous solution as a green solvent in microwave-assisted extraction (MAE) was firstly developed for the extraction of flavone and coumarin compounds from medicinal plants. The PEG solutions were optimized by a mono-factor test, and the other conditions of MAE including the size of sample, liquid/solid ratio, extraction temperature and extraction time were optimized by means of an orthogonal design L(9) (3(4)). Subsequently, PEG-MAE, organic solvent-MAE, and conventional heating reflux extraction (HRE) were evaluated with nevadensin extraction from Lysionotus pauciflorus, aesculin and aesculetin extraction from Cortex fraxini. Furthermore, the mechanism of PEG-MAE was investigated, including microwave-absorptive property and viscosity of PEG solutions, the kinetic mechanism of PEG-MAE and different microstructures of those samples before and after extraction. Under optimized conditions, the extraction yields of nevadensin from L. pauciflorus, aesculin and aesculetin from C. fraxini were 98.7%, 97.7% and 95.9% in a one-step extraction, respectively. The recoveries of nevadensin, aesculin and aesculetin were in the range of 92.0-103% with relative standard derivation lower than 3.6% by the proposed procedure. Compared with organic solvent-MAE and conventional extraction procedures, the proposed methods were effective and alternative for the extraction of flavone and coumarin compounds from medicinal plants. On the basis of the results, PEG solution as a green solvent in the MAE of active compounds from medicinal plants showed a great promising prospect.     

Application of ionic liquids in the microwave-assisted extraction of polyphenolic compounds from medicinal plants

Ionic liquids (ILs) solutions as solvents were successfully applied in the microwave-assisted extraction (MAE) of polyphenolic compounds from medicinal plants. ILs, its concentration and MAE conditions were investigated in order to extract polyphenolic compounds effectively from Psidium guajava Linn. (P. guajava) leaves and Smilax china (S. china) tubers. The results obtained indicated that the anions and cations of ILs had influences on the extraction of polyphenolic compounds as well as the ILs with electron-rich aromatic π-system enhanced extraction ability. Under the optimized conditions, the extraction yields of the polyphenolic compounds were in the range of 79.5-93.8% with one-step extraction, and meanwhile the recoveries were in the range of 85.2-103% with relative standard deviations (R.S.D.s) lower than 5.6%. Compared to conventional extraction procedures, the results suggested that the proposed method was effective and alternative for the extraction of polyphenolic compounds from medicinal plants. In addition, the extraction mechanisms and the structures of samples before and after extraction were also investigated. ILs solutions as green solvents in the MAE of polyphenolic compounds from medicinal plant samples showed a great promising prospect.     

Health risk assessment of heavy metals and their source apportionment in drinking water of Kohistan region, northern Pakistan

The present study was conducted to investigate heavy metal (Cu, Co, Cr, Mn, Ni, Pb, Zn and Cd) concentrations of drinking water (surface water and groundwater) samples in Kohistan region, northern Pakistan. Furthermore, the study aimed to ascertain potential health risk of heavy metal (HM) concentrations to local population. HM concentrations were analyzed by using graphite furnace atomic absorption spectrometer (Perkin Elmer, AAS-PEA-700) and were compared with permissible limits set by Pakistan Environmental Protection Agency (Pak EPA) and World Health Organization (WHO). Based on HM concentrations the health risk assessment like chronic daily intake (CDI) and hazard quotient (HQ) was calculated. The values for CDI were found in the order of Zn > Cu > Mn > Pb > Cr > Ni > Cd > Co and the values of HQ were < 1 for all HM in drinking water samples indicating no health risk. Furthermore, multivariate statistical analysis like one-way ANOVA, inter-metal correlation, cluster analysis (CA) and principal component analysis (PCA) results revealed that geogenic and anthropogenic activities were major sources of water contamination in Kohistan region.     

Pressurized hot water extraction of berberine, baicalein and glycyrrhizin in medicinal plants

Pressurized hot water extraction (PHWE) using a laboratory made system was applied for the extraction of thermally labile and reasonably polar components such as berberine in coptidis rhizoma, glycyrrhizin in radix glycyrrhizae/liquorice and baicalein in scutellariae radix. PHWE was carried out dynamically at a flow of 1 ml/min, temperature between 95 and 140 °C, an applied pressure of 10-20 bar and extraction time of 40 min. Extraction by PHWE was found to give efficiencies comparable to Soxhlet extraction for baicalein in scutellariae radix and sonication for berberine in coptidis rhizoma, and glycyrrhizin in radix glycyrrhizae. Effects of ethanol added into the water used in PHWE were explored. Pressurized liquid extraction (PLE) with methanol as solvent was used for extraction of baicalein in scutellariae radix. The marker compounds present in the various medicinal plant extracts were determined by gradient elution HPLC.     

Characteristics of the aerosol particulates in the atmosphere in an urban environment at Faisalabad, Pakistan

Summary The deposition of trace and major elements from the atmosphere to the ground is an important factor for plants, animals and humans as well. Total suspended particulate matter was measured by a standard gravimetric technique. A scanning electron microscope was used for the evaluation of the size distribution and morphological structures of the aerosol particulates trapped on the surface of filter paper. The aerosol particulates were studied by a scanning electron microscope at various magnification. The trace elemental composition in the atmosphere of Faisalabad was studied by using instrumental neutron activation analysis (INAA) and atomic absorption spectrometry (AAS). Concentrations of 23 trace elements and a major one were determined in samples of aerosol particulates collected during a longe sampling period in the atmosphere at Faisalabad, Pakistan. Their amount was two times higher than the limits adopted by the U.S. Environmental Protection Agency for the urban environment.     

Effects of processing on five selected metals in the durum wheat food chain

The concentration levels of five metals, namely Cd, Cr, Fe, Ni and Pb, were investigated along the durum wheat processing chain, from grain to the final product. Cadmium and Pb are well-known toxic elements and their levels in wheat grain are regulated by the European legislation. Chromium, Fe and Ni were included in the study as markers of metal release from equipment during processing. Durum wheat grain, semolina and pasta were sampled at an industrial plant for milling and pasta making. Samples were taken at different stages along processing in order to elucidate the influence of each stage on the element content. Samples of the water used for grain tempering and dough preparation were also collected. The whole analytical procedure, from sampling to final analytical determinations, was carried out according to a pre-established quality assurance protocol. Analyses were performed by inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled plasma atomic emission spectrometry (ICP-AES).Milling was the key process influencing the concentrations of the studied elements and reduced the metal levels according to a definite element-specific pattern. Purity of the water used as ingredient, element deposition from plant air and metal release from equipment were identified as critical issues in contamination control during processing. In the conditions of this study, it was found that a simple relationship can be established between the original concentrations in durum wheat grain and those in pasta for Cd and Fe, while for Pb, Cr and Ni, a greater uncertainty in the estimation of the levels in the final product is expected.     

Ionic liquids as a tool for determination of metals and organic compounds in food analysis

Ionic liquids (ILs) are non-molecular solvents, which are mainly characterized as possessing low melting points, low-to-negligible vapor pressures, and high thermal stability. Their unique solvation properties, coupled to the fact that they can be structurally tailored for specific applications, have increased study of ILs in many areas of fundamental and applied chemistry. Thus, ILs have successfully been utilized as novel solvents in different extraction and microextraction schemes in recent years, but mainly with environmental samples.Food samples are quite complicated matrices from an analytical point of view. They contain a large range of chemical substances, and sometimes they also have a high fat content. Even with the most advanced analytical techniques, food sampling and food-sample preparation prior to the analytical determination are labor-intensive and time-consuming, and normally require relatively large amounts of organic solvents.In this review, we summarize the most recent analytical developments aimed at employing ILs as a tool in food analysis. We discuss practical applications to determine metals and organic compounds in food samples of quite different natures, with special emphasis to the extraction step at which the IL is introduced, and the advantages of the IL-based methods developed over conventional extraction methods.     

Evaluation of surfactant assisted pressurized liquid extraction for the determination of glycyrrhizin and ephedrine in medicinal plants

Surfactant assisted pressurized liquid extraction (PLE) with a laboratory made system was applied for the extraction of glycyrrhizin in Radix glycyrrhizae/liquorice and ephedrine in Ephedra sinica. The proposed system set-up for this current work was simpler as no heating and back pressure regulator was required. Extraction with surfactant assisted PLE was carried out dynamically at a flow of 1.5 mL min⁻¹, at room temperature, under an applied pressure of 10-20 bar with an extraction time of 45-50 min. The extraction efficiencies of the proposed method using surfactants such as sodium dodecyl sulfate (SDS) and Triton X-100 were compared with sonication using organic solvent for different batches of medicinal plants materials. For the determination of glycyrrhizin in R. glycyrrhizae, the extraction efficiencies of surfactant assisted PLE with SDS and Triton X-100 was observed to be comparable with sonication. The method precision was found to vary from 1.6 to 2.6% (R.S.D., n = 6) on different days. For ephedrine in E. sinica, surfactant assisted PLE with SDS was found to give higher extraction efficiencies compared to Triton X-100. The overall method precision for surfactant assisted PLE with SDS for ephedrine in E. sinica was found to vary from 1.5 to 4.1% (R.S.D., n = 6) on different days. The marker compounds present in the various medicinal plant extracts were determined by gradient elution HPLC. Our data showed the possibility of PLE at room temperature and the advantages of eliminating the use of organic solvents in the extraction process.     

Human health risk assessment of heavy metals via consumption of contaminated vegetables collected from different irrigation sources in Lahore,Pakistan

Soil pollution with heavy metals due to discharge of untreated urban and industrial wastewater is a major threat to ecological integrity and human well-being. The presenting study aimed to determine human health risks associated via food chain contamination of heavy metals routing from irrigation of urban and industrial wastewater. Irrigated water, soil and vegetables were analyzed for Cr²⁺, Co²⁺, Ni²⁺, Cu²⁺, Pb²⁺, Cd²⁺, Mn²⁺ and Zn²⁺; transfer factor (TF), daily intake of metals (DIM) and health risk index (HRI) were also calculated. Cr²⁺, Pb²⁺ and Cd²⁺ in vegetables cultivated by wastewater exceeded the permissible limits (European Union, 2002) while TF was lower for all metals except Co²⁺ and HRI was found to be maximum for Spinacia oleracea (2.42 mg/kg) and Brassica campestris (2.22 mg/kg) cultivated by wastewater. S. oleracea, B. campestris, Coriandrum sativum posed a severe health risk with respect to Cd and Mn.     

Microplastics and associated emerging contaminants in the environment: Analysis,sorption mechanisms and effects of co-exposure

Microplastics (MPs) and other emerging pollutants exist together in the environment and their co-exposure represents a source of increasing concern as MPs have been reported to act as carriers of pollutants due to their high sorption capacity. The ingestion of contaminated MPs by organisms can enhance the desorption of pollutants, increasing their bioavailability and toxicity. This review examines the role of MPs as vectors of environmental emerging contaminants. First, the main tools used to identify and characterise MPs and the analytical methods used for the determination of associated emerging contaminants are discussed. Insightful explanations of the sorption interaction between several groups of emerging pollutants and MPs are provided. MP type (polarity, crystallinity, size) and aging process together with the environmental conditions and pollutant properties (hydrophobicity and dissociated forms) are key factors influencing the sorption process. The literature review showed that polyethylene and polystyrene were the most commonly studied polymers. Antibiotics, perfluoroalkyl compounds and triclosan showed high sorption capacities onto MPs. Finally, the effect of co-exposure to MPs-emerging pollutants and bioaccumulation in aquatic and terrestrial organisms is discussed. The combined exposure may impact the toxic effects in different ways, through synergistic or antagonic interactions. Examples of different scenarios are provided, but in general the research conducted on terrestrial systems is scarce. The results revealed a lack of standardization in laboratory studies and in the testing conditions that reflect actual environmental exposure.     

Speciation analysis of selected metals and determination of their total contents in paired serum and cerebrospinal fluid samples: An approach to investigate the permeability of the human blood-cerebrospinal fluid-barrier

Neurodegenerative diseases like Alzheimer's disease and Parkinson's disease are gaining increasing relevance in our aging society. However, the complex multifactorial mechanisms of these diseases are not sufficiently understood yet. Several studies indicate that metal ions play an important role in the promotion of these diseases. Consequently, the transport pathways of metals and their species to the brain are of special interest. Following oral or inhalative uptake metals are absorbed and distributed via the blood stream in the body. Transport into the brain requires crossing of the neural barriers.Our study focuses on the investigation of the permeability of the blood-cerebrospinal fluid (CSF)-barrier for selected metals (Mn, Fe, Cu, Zn, Mg and Ca). For the first time paired human serum and CSF samples obtained from a neurological department were characterised for total metal concentrations and metal species. For CSF few data are available in the literature on total metal contents and applications of element speciation analysis in CSF samples are rare. In our study mean CSF/serum ratios (n = 29) were 0.7 for Mn, 0.02 for Fe, 0.02 for Cu, 0.03 for Zn, 1.3 for Mg and 0.5 for Ca. Size exclusion chromatography (SEC) online with inductively coupled plasma mass spectrometry was further developed for the size characterisation of the metal species in CSF and serum with limits of detection of 0.4 μg L⁻¹ for Fe, 0.01 μg L⁻¹ for Mn, 0.2 μg L⁻¹ for Cu, 0.2 μg L⁻¹ for Zn, 0.6 μg L⁻¹ for Mg and 3.8 μg L⁻¹ for Ca in the eluate from the HPLC column. Apart from Mn the application of this technique has not been published for metal speciation in CSF, yet. In the case of some Mn species it turned out that methanol, which was contained in the mobile phase of a SEC method previously published from our group on qualitative characterisation of Mn species, was interfering with the quantification. The modified method developed in this work (with NaCl but without methanol in the mobile phase; use of internal standard) allowed reliable quantification. The results clearly indicate changes in the metal species pattern due to different permeation behaviour at the blood-CSF-barrier. As part of the method validation the relative stability of complexes of albumin, transferrin and citrate with Mn, Fe, Cu and Zn was investigated.     

Comparison of extraction solvents and sorbents in the quick,easy, cheap,effective, rugged,and safe method for the determination of pesticide multiresidue in fruits by ultra high performance liquid chromatography with tandem mass spectrometry

An improved analytical method was developed for the simultaneous quantification of several plant growth regulators and fungicides (carbendazim, pyrimethanil, metalaxyl, triadimefon, paclobutrazol, thiophanate, prochloraz, dimethomorph, difenoconazole, (4‐chlorophenoxy)‐acetic acid, (2,4‐dichlorophenoxy)‐acetic acid, thiadiazuron, forchlorfenuron and gibberellins) in fruits followed by ultra high performance liquid chromatography with tandem mass spectrometry. Samples were extracted and purified using a modified QuEChERS method. Different extraction solvents and sorbents in the QuEChERS method were compared. Optimum results were followed by the addition of 1% acetic acid in acetonitrile; C₁₈ sorbent was added due to the acidic nature of several pesticides. The recoveries of the pesticides were in the range 73.7–118.4%, with relative standard deviations lower than 16.63%. Limits of detection ranged from 0.1–1.0 μg/kg. The method presented here is simple, rapid, sensitive and can be applied to large‐scale monitoring programs to screen the presences of pesticides in fruits.     

Synthesis of poly-yne polymers containing transition metals,disilane, disiloxane and phosphine groups in the main chain

The synthesis and characterization of metal poly-yne polymers containing disilane, disiloxane and phosphine groups in the main chain are described. The platinum and palladium poly-yne polymers were synthesized by polycondensation reactions between a metal chloride and an α, ω-bisethynyl complex in amines in the presence of cuprous iodide as a catalyst. The nickel poly-yne polymers were synthesized by an alkynyl ligand exchange reaction between a nickel acetylide and an α, ω-bisethynyl complex in diethylamine in the presence of cuprous iodide as a catalyst. The reaction of the platinum poly-yne polymer, containing disiloxane groups in the main chain, with copper (I) salts afforded adducts of η-²-bonded σ-acetylide polymer complexes. The reactions of the palladium poly-yne polymer, containing phosphine groups in the main chain, with transition-metal carbonyl complexes afforded polymer complexes which have phosphorus in the main chain-transition-metal bonds. A concentrated solution of the platinum poly-yne polymer containing disiloxane groups in the main chain forms a lyotropic liquid crystal in dichloromethane or 1, 2-dichloroethane.     

Short-term and spatial variation of selected metals in the atmosphere of Niterói City, Brazil

In this work, the atmospheric concentration of selected trace elements (Cd, Fe, Mn, Pb, V and Zn) was determined in total suspended material (TSP) from three sampling sites located at Niterói, an urban medium city of Rio de Janeiro, Brazil. TSP samples were collected with a high volume air sampler and glass fibber filters. The determinations of Cd, Pb and Zn were performed by ICP-AES while V was determined by ETA-AAS and Fe and Mn were measured by FAAS. Among all elements, Fe showed the highest concentrations (0.5-12.5 μg/m³) during the study but the concentrations of all elements varied along the week. The maximum levels of TSP, Fe, Mn, Cd and V were observed on Wednesday which was characterised by the highest winds frequency with higher speeds coming from the North quadrant, mainly from the Northeast direction. Enrichment factors showed that Cd, Pb and Zn are enriched in all sites suggesting that anthropogenic sources play important roles for those elements. Statistical analysis has been carried out to evaluate the effect of meteorological parameters and characterisation of sampling sites.     

Ecotoxicity of, and remediation with, engineered inorganic nanoparticles in the environment

This article presents recent developments on the use of inorganic nanoparticles (NPs) for environmental remediation in polluted soil, water and gas. The number of publications on these topics has grown exponentially in recent years, especially those focused on wastewater treatment. Among these topics, removal of metals has become the most popular, although some works relate to the use of nanomaterials for the elimination of nutrients (e.g., nitrogen and some persistent organic pollutants). However, this growth has not been accompanied by knowledge about the behavior of NPs once used and released into the environment. In this article, we also comment upon the current situation with respect to NP toxicology (nanotoxicology). A remarkable number of different toxicology tests has been applied to NPs, often making it very difficult to interpret or to generalize the results. We analyze in detail the bioluminescence, Daphnia magna and other tests, and give some preliminary results obtained in our work.     

Evaluation of radon concentration and heavy metals in drinking water and their health implications to the population of Quetta,Balochistan, Pakistan

ABSTRACT

The purpose of this study is to estimate the concentrations of radon and heavy metals in drinking water and assess their health implications to the population of Quetta, Pakistan. The concentration of radon and heavy metals was measured in drinking water collected from tube wells of different depths of the Quetta, Balochistan, Pakistan, using RAD7 detector and Atomic Absorption Spectrometer, respectively. The results show that the concentration of radon ranged from 3.56 ± 0.98 to 8.56 ± 1.32Bq/L with an average of 5.67 ± 1.34Bq/L. The average value of contribution of radon in water to indoor air was found 2.02 ± 0.47mBq/L. In addition to concentration of radon in drinking water, physiochemical parameters like pH and electrical conductivity (EC), and annual effective doses for different age groups were also estimated. Positive correlation of (R² = 0.8471) was observed between depth of well and concentration of radon, however no such relations were found among pH and EC with concentration of radon. Average values of annual effective doses due to intake of radon for age groups 0–1 years (infants), 2–16 years (Children) and ≥17 years (adults) were found (3.00 ± 0.71)×10^?2, (1.1 ± 0.26)×10^?2 and (1.45 ± 0.34)×10^?2 mSv/y, respectively. Average values of heavy metals concentrations were found 1.85 ± 0.64, 3.21 ± 0.75, 5.06 ± 1.19, and 2.47 ± 0.77 and 5.58 ± 1.23 µg/L for As, Cr, Ni, Cd and Pb, respectively. The values of radon concentration and heavy metals in drinking water were found below the USEPA permissible limits, Thus we conclude that, the investigated waters are safe.     

Human Health Risk Surveillance Through the Determination of Organochlorine Pesticides by High-Performance Liquid Chromatography in Water,Sediments, and Fish from the Chenab River,Pakistan

The current study assessed the spatiotemporal variations and human health surveillance associated with organochlorine pesticide (OCP) contamination in water, sediments, and fish from Chenab River, Pakistan. The OCP determinations were performed using high-performance liquid chromatography with a reverse-phase C18 column. The total OCP levels ranged from 13.33 to 274.59?ng/L in water, 4.63 to 239.11?ng/g in sediments, and 23.79 to 387.12?ng/g in fish species. The overall pattern of mean OCP concentrations followed the order as ΣDDTs?>?Σendosulfan?>?aldrin and OCP pollution pattern among the headworks were Khanki Barrage?>?Qadirabad Barrage?>?Trimmu Barrage?>?Marala Barrage in all three environmental matrixes during both seasons. The estimated daily intake (EDI) for ∑OCPs was found to be 22.44?ng/kg/day. The hazard ratios calculated to assess the carcinogenic risk indicated that the values for ∑DDT and aldrin at the 95th percentile concentrations were greater than one, indicating the probability of carcinogenic risk occurrence of one in million populations due to fish consumption. Therefore, these high levels of OCPs and carcinogenic risk through fish consumption highlight the needs of immediate elimination of OCPs from riverine environment of Chenab River and we recommend long-term monitoring-based freshwater ecological studies to be conducted in the study area.