Use of 1-alkyl-3-methylimidazolium hexafluorophosphate room temperature ionic liquids as chelate extraction solvent with 4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedione

Possible use of room temperature ionic liquids (RTILs) as chelate extraction solvent was evaluated by using 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF₆]), 1-hexyl-3-methylimidazolium hexafluorophosphate ([hmim][PF₆]) and 1-octyl-3-methylimidazolium hexafluorophosphate ([omim][PF₆]). These RTILs showed high extraction performance for divalent metal cations with 4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedione (Htta). The extracted metals were back-extracted into 1 mol dm⁻³ nitric acid quantitatively. Furthermore, the extracted species were estimated as neutral hydrated complexes M(tta)₂(H₂O)_n (n= 1 or 2) for M = Ni, Cu and Pb and anionic complexes M(tta)₃⁻ for M = Mn, Co, Zn and Cd.     

Effects of temperature and anion species on CO2 permeability and CO2/N2 separation coefficient through ionic liquid membranes

The permeability of carbon dioxide (CO₂) through imidazolium-based ionic liquid membranes was measured by a sweep gas method. Six species of ionic liquids were studied in this work as follows: [emim][BF₄], [bmim][BF₄], [bmim][PF₆], [bmim][Tf₂N], [bmim][OTf], and [bmim][dca]. The ionic liquids were supported with a polyvinylidene fluoride porous membrane. The measurements were performed at T = (303.15 to 343.15) K. The partial pressure difference between feed and permeate sides was 0.121 MPa. The permeability of the CO₂ increases with temperature for the all ionic liquid species. Base on solution diffusion theory, it can be explained that the diffusion coefficient of CO₂ in an ionic liquid affects the temperature dependence more strongly than the solubility coefficient. The greatest permeability was obtained with the [bmim][Tf₂N] membrane. The membrane of [bmim][PF₆] presents the lowest permeability.The separation coefficient between CO₂ and N₂ through the ionic liquid membranes was also investigated at the volume fraction of CO₂ at feed side 0.10. The separation coefficient decreases with the increase of temperature for the all ionic liquid species. The membrane of [emim][BF₄] and [bmim][BF₄] gives the highest separation coefficient at constant temperature. The lowest separation coefficient was obtained from [bmim][Tf₂N] membrane which presents the highest permeability of CO₂.     

Extraction of Metal Ions from Aqueous Solutions Using Imidazolium Based Ionic Liquids

This article represents a step towards how to choose an ionic liquid as the solvent to improve metal ion (Ag⁺ and Pb²⁺) extraction. The liquid-liquid solvent extraction is proposed with the following imidazolium ionic liquids (ILs): 1-ethyl-3-ethylimidazolium, or 1-butyl-3-ethylimidazolium, or 1-hexyl-3-ethylimidazolium bis{(trifluoromethyl)sylfonyl}imide [EEIM][NTf₂], or [BEIM][NTf₂], or [HEIM][NTf₂], or 1-butyl-3-ethylimidazolium hexafluorophosphate [BEIM][PF₆], or 1-hexyl-3-ethylimidazolium hexafluorophosphate [HEIM][PF₆] and the popular 1-butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF₆] for comparison. The effect of anion type (NTf₂⁻ versus PF₆⁻) and the effect of structural components of an ionic liquid including alkyl chain length at the cation and the ethyl substituent instead methyl at the cation, on the extraction and re-extraction processes by using dithizone as a metal chelator, were studied at 296 K. Dithizone was employed to form neutral metal-dithizone complexes with heavy metal ions to extract them from aqueous solution into the ILs. Electronic Supplementary Material  The online version of this article () contains supplementary material, which is available to authorized users. Presented at the 236th ACS National Meeting, August 17–21, Philadelphia, USA.     

Chemoselective reduction of aromatic nitro and azo compounds in ionic liquids using zinc and ammonium salts

Nitroarenes were chemoselectively reduced to the corresponding amines using zinc and aqueous ammonium salts in ionic liquids as a safe and recyclable reaction medium. Our results specify the effect of ammonium salts in the process; the combination of Zn/NH₄Cl in [bmim][PF₆] or Zn/HCO₂NH₄ in [bmim][BF₄] were the suitable conditions for the reduction of nitroarenes. Azobenzenes were also smoothly reduced to hydrazobenzenes with Zn/HCO₂NH₄ (aq.) in recyclable [bmim][BF₄] without any over reduction to the corresponding anilines.     

Preconcentration of aqueous dyes through phase-transfer liquid-phase microextraction with a room-temperature ionic liquid

In this study, we employed the room-temperature ionic liquid [bmim][PF₆] as both ion-pair agent and an extractant in the phase-transfer liquid-phase microextraction (PTLPME) of aqueous dyes. In the PTLPME method, a dye solution was added to the extraction solution, comprising a small amount of [bmim][PF₆] in a relatively large amount of CH₂Cl₂, which serves as the disperser solvent to an extraction solution. Following extraction, CH₂Cl₂ was evaporated from the extractant, resulting in the extracted dyes being concentrated in a small volume of the ionic liquid phase to increase the enrichment factor. The enrichment factors of for the dye Methylene Blue, Neutral Red, and Methyl Red were approximately 500, 550 and 400, respectively; their detection limits were 0.014, 0.43, and 0.02 μg L⁻¹, respectively, with relative standard deviations of 4.72%, 4.20%, and 6.10%, respectively.     

Evaluation of [bmim][PF6] as an ionic solvent for the extraction of propylbenzene from aliphatic compounds

The evaluation of using 1-butyl-3-methylimidazolium hexaflurophosphate ionic liquid, [bmim][PF₆], as a solvent for the extraction of propylbenzene from aliphatic compounds was studied. The (liquid + liquid) equilibrium (LLE) for two ternary systems comprising {dodecane or tetradecane + propylbenzene + [bmim][PF₆]} were analysed at atmospheric pressure and two temperatures, (313 and 333) K. The consistency of the experimental tie line data was ascertained by applying the Othmer–Tobias correlation. The effect of temperature, n-alkane chain length and solvent to feed ratio upon solubility, distribution ratio, selectivity, and per cent removal of the aromatic were investigated. The experimental LLE data were correlated using the UNIQAC and NRTL models for the activity coefficient with estimation of new interaction parameters, using the simplex minimization method and a composition based objective function. The calculated results from both methods are considered satisfactory.     

Cross-condensation of derivatives of cyanoacetic acid and carbonyl compounds. 2. One-pot synthesis of substituted 2-amino-7-methyl-5-oxo-4,5-dihydropyrano[4,3-b]pyrans in ethanol and ionic liquid [bmim][PF6]

The three-component reaction of 4-hydroxy-6-methylpyran-2(2H)-one with cyanoacetic acid derivatives and carbonyl compounds in EtOH or in the ionic liquid, viz., 1-butyl-3-methylimidazolinium hexafluorophosphate ([bmim][PF₆]), affords substituted 2-amino-7-methyl-5-oxo-4,5-dihydropyrano[4,3-b]pyrans. The yield of substituted pyrano[4,3-b]pyrans in [bmim][PF₆] is by 10—14% higher than that in EtOH.     

Solvent relaxation of a room-temperature ionic liquid [bmim][PF6] confined in a ternary microemulsion

In this paper we have reported the solvent and rotational relaxation of 1-butyl-3-methyl-imidazolium hexafluorophosphate ([bmim][PF₆]) confined in tween 20/([bmim][PF₆]/water microemulsion using coumarin 153 (C-153) as probe. The most interesting feature of our experiment was that we observed an increase in solvent relaxation time with increase in R (R = tween 20-to-[bmim][PF₆] molar ratio). This is due to the fact that with increase in [bmim][PF₆] content of the microemulsions, the microviscosity of the pool of the microemulsions increases, and motion of ions of [bmim][PF₆] is hindered in the pool of microemulsions. Since motion of ions is responsible for solvation in room-temperature ionic liquids (RTILs), solvent-relaxation time increases with increase in R.     

1-Butyl-2,3-trimethyleneimidazolium bis(trifluoromethylsulfonyl)imide ([b-3C-im][NTf2]): a new, stable ionic liquid

Using imidazole as the starting material, the synthesis of a new bicyclic ionic liquid [b-3C-im][NTf₂] is described. Except for the alkylation reaction in the second step (40% yield) of this four-step synthesis of [b-3C-im][NTf₂], others were all high yielding reactions (85-94% isolated yields). We investigated intrinsic reactivity of this and other imidazolium-based ionic liquids and found that, under strongly basic conditions (KOD in CD₃OD/D₂O (1:1) solution), the new ionic liquid was stable to solvent deuterium isotope exchange while the previously reported [bdmim][NTf₂] and [bdmim][PF₆] ionic liquids were 50% deuterium exchanged at its C-2 methyl in 30 min at ambient temperature. At the same experimental condition, the most commonly employed [bmim][PF₆] ionic liquid was deuterium exchanged instantaneously at its C-2 hydrogen. In the absence of bases (CD₃OD/D₂O = 1:1), only [bmim][PF₆] was deuterium exchanged (50% within 1 h) and other ionic liquids gave no detectable exchanges even after one week at ambient temperature. It is therefore concluded that the new [b-3C-im][NTf₂] ionic liquid is far more chemically stable than previously reported [bmim][PF₆], [bdmim][NTf₂], and [bdmim][PF₆].     

1-丁基-3-甲基咪唑六氟磷酸盐+水+醇体系的相行为

在298.15 K, 常压下研究了1-丁基-3-甲基咪唑六氟磷酸盐([bmim][PF₆])+水+甲醇、[bmim][PF₆]+水+乙醇、[bmim][PF₆]+水+2-丙醇、[bmim][PF₆]+水+1-丙醇三元体系的相行为. 结果表明, 对于含甲醇、乙醇和2-丙醇的体系, 醇在水+醇溶液中摩尔分数分别为0.55-1.00、0.40-0.75 和0.35-0.50 时, 醇的水溶液与[bmim][PF₆]可以互溶. 而水+1-丙醇体系没有此类现象. 这说明, 这类三元系的相行为不但取决于醇分子的大小, 而且取决于其结构.     

Density and viscosity of three (2,2,2-trifluoroethanol + 1-butyl-3-methylimidazolium) ionic liquid binary systems

Densities and viscosities were determined for binary mixtures of 2,2,2-trifluoroethanol (TFE) and 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]), 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF₆]) or 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([bmim][NTf₂]) over the entire range of composition. The experimental measurements were carried out at temperatures ranging from 278.15 K to 333.15 K, at atmospheric pressure. The densities and viscosities of the pure ionic liquids and their mixtures with TFE were described successfully by an empirical third-order polynomial and by the Vogel–Fulcher–Tammann equation, respectively. In addition, excess molar volumes and viscosity deviations were determined from densities and viscosities of mixtures, respectively, and fitted by using the Redlich–Kister equation.     

Amine basicity: measurements of ion pair stability in ionic liquid media

The stability constants relevant to the formation of amine/p-nitrophenol ion pairs have been determined in [bmim][BF₄] solution, in the presence of butylamine, piperidine, and triethylamine, by using spectrophotometric measurements. In order to evaluate how the ion pair stability is affected by ionic liquid structure, piperidine has been chosen as model amine for studies in [bmim][PF₆], [bmim][NTf₂], [bm₂im][NTf₂] and in several [bmim][BF₄]/1,4-dioxane binary mixtures. Data obtained in ionic liquid solutions have been compared with those previously reported in conventional organic solvents.     

Enzymatic polyester synthesis in ionic liquids

The enzymatic synthesis of polyesters by ring-opening polymerization (ROP) and polycondensation in three ionic liquids, i.e., [bmim][Tf₂N], [bmim][PF₆] and [bmim][BF₄] was investigated. For the enzymatic ROP of ε-caprolactone it was found that [bmim][PF₆] and [bmim][BF₄] result in an inhomogeneous reaction mixture upon polymerization, causing polymerization characteristics similar to bulk polymerization. In contrast, for [bmim][Tf₂N] characteristics similar to toluene were observed. Molecular weights of 7000-9500 g/mol were obtained. In the polycondensation of dimethyl adipate and dimethyl sebacate, respectively, with 1,4-butanol the low volatility of ionic liquids was successfully utilized to perform the reactions in an open vessel at temperatures close to the boiling point of the condensation by-product. Molecular weights up to 5400 g/mol were obtained. This, in combination with the tunable solvent hydrophilicity of ionic liquids could offer an advantage in the polymerization of highly polar monomers with low solubility in organic solvents.     

Micropolarity and aggregation behavior in ionic liquid + organic solvent solutions

UV–vis spectroscopy and conductivity measurement techniques were used to study the physicochemical and structural properties of the binary or ternary mixtures of 1-n-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF₆]) + organic solvent and 1-n-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]) + organic solvent systems. The solvents involved were acetonitrile, water, ethanol, ethyl acetate, and tetrahydrofuran. It was indicated that the micropolarity and the aggregation behavior of the mixtures depend strongly on the dielectric constants of the solvents and the composition of the mixtures.     

1,3-Cycloaddition of nitrile oxides in ionic liquids. An easier route to 3-carboxy isoxazolines, potential constrained glutamic acid analogues

Several improvements in the cycloaddition of carboethoxyformonitrile oxide (CEFNO) with different alkenes are observed in the ionic liquids [bmim][BF₄] and [bmim][PF₆]. The possibility of obtaining good yields of the corresponding isoxazolines opens the way towards parallel collections of glutamic acid (Glu) analogues.     

Synthesis of Carbonyl Compounds from Alcohols Using Electrochemically Generated Superoxide Ions in RTILs

Abstract

We show that the superoxide ion (O₂ ^??) generated electrochemically from oxygen dissolved in room-temperature ionic liquids (RTILs) reacts with primary and secondary alcohols to form the corresponding ketones and carboxylic acids, respectively. Specifically, we study the conversion of benzhydrol to benzophenone and benzyl alcohol to benzaldehyde/benzoic acid. The kinetics (e.g., rate, selectivity, and yield) for these reactions are also determined as functions of the variations in the structure of the ionic liquids. The RTILs used here are imidazolium-based cations where the functional groups on the imidazolium ring are modified. Specifically, 1-butyl-3-methylimidazolium hexafluorophosphate [bmim][PF₆], 1-butyl-2,3-dimethylimidazolium hexafluorophosphate [bdmim][PF₆], and 1-hexyl-3-methylimidazolium hexafluorophosphate [hmim][PF₆] are used as the reaction medium. These results are compared to an ammonium-based RTIL (N-butyl-N-trimethylammonium bis(trifluoromethylsulfonyl)imide). The results show that the nucleophilic attack by the O₂ ^?? of both the RTIL and the alcohol, especially that of the H atom at the R2 position of the [bmim][PF₆] and [hmim][PF₆], greatly affects the yields. No RTIL degradation products were detected for the reactions in [bdmim][PF₆] and N-butyl-N-trimethylammonium bis(trifluoromethylsulfonyl)imide ionic liquids. For the benzyl alcohol oxidation reaction in the RTIL, N-butyl-N-trimethylammonium bis(trifluoromethylsulfonyl)imide, benzaldehyde formed did not undergo further oxidation to form benzoic acid, which may be due to the greater hydrophobicity of this RTIL. The competitive reaction kinetics between the alcohol and RTIL component must be considered in the selection of the RTIL solvent system.     

Baylis-Hillman reaction in [bdmim][PF6] ionic liquid

A new use of ionic liquid [bdmim][PF₆] as solvent for the Baylis-Hillman reaction is presented. Unlike the commonly used [bmim][PF₆] that evidently reacts with electrophilic aldehydes under basic conditions, ionic liquid [bdmim][PF₆] is inert and the Baylis-Hillman reaction in [bdmim][PF₆] proceeds smoothly with better yield.     

A practical synthesis of 2‐aminobenzothiazoles via copper(I)‐catalyzed tandem reaction of 2‐iodoanilines with isothiocyanates in ionic liquids

A copper(I)‐catalyzed tandem reaction of 2‐iodoanilines with isothiocyanates was achieved in hydrophobic [bmim][PF₆] ionic liquid under mild conditions, generating a variety of 2‐aminobenzothiazoles in good to excellent yields. The tandem reaction that was carried out in [bmim][PF₆] has some obvious advantages such as accelerated reaction rate and increased yield as compared with the reaction run in volatile solvents such as toluene. Furthermore, the CuI/1,10‐phenanthroline catalytic system can be reused up to eight times without loss of activity and efficiency. Copyright © 2016 John Wiley & Sons, Ltd.     

Bicyclic imidazolium-based ionic liquids: synthesis and characterization

We previously reported the use of imidazole as starting compound for preparing a bicyclic imidazolium ionic liquid, [b-3C-im][NTf₂], with an overall 29% isolated yield in four synthetic steps. This new room temperature ionic liquid was shown to be far more chemically stable than commonly used [bmim][PF₆], [bdmim][PF₆], and [bdmim][NTf₂]. Because of this intriguing chemical stability, it prompted us to develop a more generalized and high yielding synthesis so that molecular diversity of bicyclic ionic liquids may be explored. In this work, we amended the previous synthetic route by employing 4-chlorobutyronitrile or 5-chlorovaleronitrile as starting materials and successfully developed a five-step synthesis of a series of novel bicyclic imidazolium-based ionic liquids in 40-53% overall isolated yields. We investigated intrinsic reactivity of all bicyclic ionic liquids prepared and found that, under strongly basic conditions, among all tested ionic liquids the 5,5-membered [R-3C-im][NTf₂] ionic liquids were most stable to solvent deuterium isotope exchange while the previously reported [bdmim][NTf₂] ionic liquid was 50% deuterium exchanged at its C-2 methyl in 30 min at ambient temperature. Under identical condition, the commonly used [bmim][NTf₂] ionic liquid was deuterium exchanged instantaneously at its C-2 hydrogen. In the absence of bases, only [bmim][PF₆] was deuterium exchanged (50% within 1 h) and all other ionic liquids gave no detectable exchanges even after 25 days at ambient temperature. Moreover, both [bmim][NTf₂] and [bdmim][NTf₂] ionic liquids were readily methylated at C-2 position with methyl iodide under basic condition at room temperature. Under the same condition, [R-3C-im][NTf₂] and [R-4C-im][NTf₂] ionic liquids were completely stable and chemically inert. We envisioned that [R-3C-im][NTf₂] should be well suited as solvents for organic synthesis.     

Homogeneous catalytic aminocarbonylation of iodoalkenes and iodobenzene with amino acid esters under conventional conditions and in ionic liquids

Amino acid methyl esters were used as amine nucleophiles in palladium catalysed aminocarbonylation of iodobenzene and iodoalkenes (1-iodo-cyclohexene and 17-iodo-androst-16-ene). 2-Oxo-carboxamide type derivatives can be isolated as a result of double CO insertion by using iodobenzene as a substrate at elevated carbon monoxide pressure. On the contrary, carboxamides of expected structure were obtained exclusively in excellent yields in the whole pressure range by using iodoalkenes. The aminocarbonylation of 17-iodo-androst-16-ene in [bmim][PF₆] or [bmim][BF₄] (where bmim=1-butyl-3-methyl-imidazolium cation) ionic liquids was also carried out and the ionic liquid-catalyst mixtures have been reused several times with only a small loss of activity.