Efficient Electroluminescence from Excimers of 1,3,6,8‐Tetrakis(3,5‐dimethylphenyl)pyrene

Excimers are generally considered as detrimental to OLEDs. For pyrene‐based chromophores, however, this is not always true. In this contribution, two new methylated tetraphenylpyrenes, 1,3,6,8‐tetra‐o‐tolylpyrene (TTPy) and 1,3,6,8‐tetrakis(3,5‐dimethylphenyl)pyrene (TDMPPy), were synthesized through Suzuki coupling reactions. TDMPPy absorbs and emits light at longer wavelengths than TTPy due to its more planar conformation and thus better conjugation. TDMPPy is prone to excimer formation, thus leading to a strong bathochromic shift (84 nm) in the photoluminescence spectrum of its film. TDMPPy exhibits efficient electroluminescence originating from pyrene excimers, affording a maximum luminance of 26 670 cd m^?2 and a current efficiency as high as 10.8 cd A^?1 in a non‐doped OLED (ITO/PEDOT:PSS (50 nm)/NPB (30 nm)/TDMPPy (30 nm)/TPBI (40 nm)/Ca:Ag).     

6-N,N-diphenylaminobenzofuran-derived pyran containing fluorescent dyes: a new class of high-brightness red-light-emitting dopants for OLED

Dye-doped organic light-emitting diode of ITO/alpha-NPB (70 nm)/Bebq(2)-1 (7 nm)/BCP (5 nm)/Bebq(2) (33 nm)/LiF (1 nm)/Al (150 nm) shows red electroluminescence with the efficiency of 2.9 cd/A at 100 cd/m(2) and maximum brightness of 62000 cd/m(2). The physical organic aspects of the current-induced fluorescent quenching effect are discussed. [structure: see text]     

Simple Synthesis of Red Iridium(III) Complexes with Sulfur-Contained Four-Membered Ancillary Ligands for OLEDs

Phosphorescent iridium(III) complexes have been widely researched for the fabrication of efficient organic light-emitting diodes (OLEDs). In this work, three red Ir(III) complexes named Ir-1, Ir-2, and Ir-3, with Ir-S-C-S four-membered framework rings, were synthesized efficiently at room temperature within 5 min using sulfur-containing ancillary ligands with electron-donating groups of 9,10-dihydro-9,9-dimethylacridine, phenoxazine, and phenothiazine, respectively. Due to the same main ligand of 4-(4-(trifluoromethyl)phenyl)quinazoline, all Ir(III) complexes showed similar photoluminescence emissions at 622, 619, and 622 nm with phosphorescence quantum yields of 35.4%, 50.4%, and 52.8%, respectively. OLEDs employing these complexes as emitters with the structure of ITO (indium tin oxide)/HAT-CN (dipyra-zino[2,3-f,2′,3′-h]quinoxaline-2,3,6,7,10,11-hexacarbonitrile, 5 nm)/TAPC (4,4′-cyclohexylidenebis[N,N-bis-(4-methylphenyl)aniline], 40 nm)/TCTA (4,4″,4″-tris(carbazol-9-yl)triphenylamine, 10 nm)/Ir(III) complex (10 wt%): 2,6DCzPPy (2,6-bis-(3-(carbazol-9-yl)phenyl)pyridine, 10 nm)/TmPyPB (1,3,5-tri(mpyrid-3-yl-phenyl)benzene, 50 nm)/LiF (1 nm)/Al (100 nm) achieved good performance. In particular, the device based on complex Ir-3 with the phenothiazine unit showed the best performance with a maximum brightness of 22,480 cd m⁻², a maximum current efficiency of 23.71 cd A⁻¹, and a maximum external quantum efficiency of 18.1%. The research results suggest the Ir(III) complexes with a four-membered ring Ir-S-C-S backbone provide ideas for the rapid preparation of Ir(III) complexes for OLEDs.     

Efficient electroluminescence from new lanthanide (Eu3+, Sm3+) complexes

The syntheses, structures, and electroluminescent properties are described for two new lanthanide complexes Ln(HFNH)3phen [HFNH = 4,4,5,5,6,6,6-heptafluoro-1-(2-naphthyl)hexane-1,3-dione; phen = 1,10-phenanthroline; Ln = Eu3+ (1), Sm3+ (2)]. Both complexes exhibit bright photoluminescence at room temperature (RT) due to the characteristic emission of Eu3+ and Sm3+ ion. Several devices using the two complexes as emitters were fabricated. The performances of these devices are among the best reported for devices using europium complex and samarium complex as emitters. The device based on 1 with the structure ITO/TPD (50 nm)/1:CBP (10%, 40 nm)/BCP (20 nm)/AlQ (30 nm)/LiF (1 nm)/Al (200 nm) exhibits the maximum brightness of 957 cd/m2, current efficiency of 4.14 cd/A, and power efficiency of 2.28 lm/W with a pure red Eu3+ ion emission. Especially, at the high brightness of 200 cd/m2, the device of 1 still has a high current efficiency of 2.15 cd/A. The device of 2 with a three-layer structure of ITO/TPD (50 nm)/2 (50 nm)/BCP (20 nm)/LiF (1 nm)/Al (200 nm) gives the maximum brightness of 42 cd/m2, current efficiency of 0.18 cd/A. By the comparison of the electroluminescent properties of devices based on Eu(TTA3phen (TTA = 2-thenoyltrifluoroacteonate) and 1, we conclude that the polyfluoration on the alkyl group of the ligand and the introduction of the long conjugate naphthyl group into the ligand improve the efficiency of 1-doped devices, especially at high current densities.     

Synthesis and blue light-emitting properties of 4,4＇-bis（diphenylamino）-quinque（p-phenyl）s

An excellent organic blue light-emitting diode based on 4,4＇-bis（diphenylamino）-quinque（p-phenylene）s （OPP（5）-NPh） with a maximum luminance of up to 5000 cd/m^2 and a luminanous efficiency of 1.3 cd/A was reported. This diode was made by using a wide band-gap hole-blocking layer, F-TBB instead of PBD in the OLED devices. We attribute the good performance to the one trade-off involved in the use of F-TBB to obtain higher luminance is the increased turn-on voltages and slightly decreased device efficiencies.     

Conjugated Polymers for Optoelectronic Applications

Novel conjugated polymers containing carbazole, phenothiazine or triphenylamine units in the main chain were designed and synthesized via Wittig, Knovenagel or Heck condensations respectively. A majority of them have good solubility in common organic solvents, high thermal stability and good hole-injection ability. Their diluted solutions in THF showed strong absorption with the absorption maximum in the range of 294∼470 nm and the optic band gaps located in the range of 1.90∼2.75 eV. When irradiated by ultraviolet or visible light, the diluted solutions in THF of the polymers emitted light from purple to yellow color with the emission maximum in the range of 347∼597 nm and the full width at half maximum located in the range of 59∼119 nm. Several polymeric light-emitting diodes (PLEDs) devices were fabricated using these polymers as light-emitting materials, and a double-layer device composed of ITO/PEDOT:PSS/PQTN/Mg:Ag showed a good performance, in which the maximum brightness was measured as 2434.0 cd/m² under a 11.0 V forward bias voltage. Photovoltaic devices were also investigated using these polymers as an active layer, and a device composed of ITO/PNB/PTCDI-C₁₃/Al showed a good performance, which was estimated to have external quantum efficiency at around 1% at 330 nm. From these preliminary experimental results, we may infer that these polymers are good light-emitting materials for PLEDs; while for photovoltaic applications, their absorption spectra need to be further improved to match the solar illumination.     

Synthesis,Structure, Properties,and Application of a Carbazole‐Based Diaza[7]helicene in a Deep‐Blue‐Emitting OLED

A carbazole‐based diaza[7]helicene, 2,12‐dihexyl‐2,12‐diaza[7]helicene ( 1 ), was synthesized by a photochemical synthesis and its use as a deep‐blue dopant emitter in an organic light‐emitting diode (OLED) was examined. Compound 1 exhibited good solubility and excellent thermal stability with a high decomposition temperature (T_d=372.1 °C) and a high glass‐transition temperature (T_g, up to 203.0 °C). Single‐crystal structural analysis of the crystalline clathrate ( 1 )₂ ? cyclohexane along with a theoretical investigation revealed a non‐planar‐fused structure of compound 1 , which prevented the close‐packing of molecules in the solid state and kept the molecule in a good amorphous state, which allowed the optimization of the properties of the OLED. A device with a structure of ITO/NPB (50 nm)/CBP:5 % 1 (30 nm)/BCP (20 nm)/Mg:Ag (100 nm)/Ag (50 nm) showed saturated blue light with Commission Internationale de L’Eclairage (CIE) coordinates of (0.15, 0.10); the maximum luminance efficiency and brightness were 0.22 cd A^?1 (0.09 Lm W^?1) and 2365 cd m^?2, respectively. This new class of helicenes, based on carbazole frameworks, not only opens new possibilities for utilizing helicene derivatives in deep‐blue‐emitting OLEDs but may also have potential applications in many other fields, such as molecular recognition and organic nonlinear optical materials.     

Novel cyclopenta[def]phenanthrene based blue emitting oligomers for OLEDs

Novel blue emitters, oligo-MCPPs (tri-MCPP, tetra-MCPP, and penta-MCPP), have been synthesized and characterized. The introduction of cyclopenta[def]phenanthrene (CPP) units into the structure of oligo-MCPPs gave LEDs with high efficiency and pure blue emission. UV-visible absorption spectra of the thin films of these compounds appear at 333-354 nm, and their maximum PL emission at 416-447 nm. Multilayer organic EL devices with oligo-MCPPs as an emitting layer showed the turn-on voltage of about 4.8 V, the maximum brightness of 1076 cd/m² (at 8.2 V), the maximum luminescence efficiency of 0.81 cd/A, and the CIE coordinates of (0.17, 0.14) with blue color.     

Synthesis of Linear and V-Shaped Carbazolyl-Substituted Pyridine-3,5-dicarbonitriles Exhibiting Efficient Bipolar Charge Transport and E-Type Fluorescence

With the aim of developing all-organic bipolar semiconductors with high charge mobility and efficient E-type fluorescence (so-called TADF) as environmentally friendly light-emitting materials for optoelectronic applications, four noble metals-free dyes with linear and V-shapes were designed using accepting pyridine-3,5-dicarbonitrile and donating carbazole units. By exploiting a donor-acceptor design strategy and using moieties with different donating and accepting abilities, TADF emitters with a wide variety of molecular weights were synthesized to achieve the optimum combination of charge-transporting and fluorescent properties in one TADF molecule. Depending on molecule structures, different TADF emitters capable of emitting in the range from 453 to 550 nm with photoluminescence quantum yields up to 98 % for the solutions in oxygen-free toluene were obtained. All compounds showed bipolar charge-transport. Hole mobility of 2.8×10⁻³ cm²/Vs at 7×10⁵ V cm⁻¹ was observed for the compound containing two di-tert-butyl-substituted carbazole moieties. The compounds were tested in both non-doped and doped organic light-emitting diodes using different hosts. It was shown that the developed TADF emitters are suitable for different color devices with electroluminescence ranging from blue to yellow and with brightness, maximum current and external quantum efficiencies exceeding 10 000 cd m⁻², 15 cd/A, and 7 %, respectively.     

Novel iridium complexes as high-efficiency yellow and red phosphorescent light emitters for organic light-emitting diodes

A series of novel biscyclometallated iridium complexes based on spirobifluorene ligands and acetyl acetonate (acac) ancillary ligands have been synthesized and characterized. Their electrochemical properties were investigated by cyclic voltammetry (CV). HOMO, LUMO, and energy band gaps of all the complexes were calculated by the combination of UV-vis absorption spectra and CV results. TGA and DSC results indicated their excellent thermal stability and amorphous structure. All the iridium complexes were fabricated into organic light-emitting devices with the device configuration of ITO/PEDOT:PSS (50 nm)/PVK (50 wt %):PBD (40 wt %):Ir complex (10 wt %) (45 nm)/TPBI (40 nm)/LiF (0.5 nm)/Ca (20 nm)/Ag (150 nm). Yellow to red light emission has been achieved from the iridium complexes guest materials. Complex C1 (yellow light emission) achieved an efficiency of 36.4 cd/A (10.1%) at 198 cd/m² and complex C4 (red light emission) reached external quantum efficiency of 4.6%. The slight decrease of external quantum efficiency at high current density revealed that the triplet-triplet (T₁-T₁) annihilation was effectively suppressed by the new developed complexes.     

新型铱配合物的合成及电致发光性质研究

合成了一种新型橙红色磷光材料铱的配合物(npp)₂Ir(acac)(npp=2-(1-萘基)-4-苯基吡啶，acac=乙酰丙酮)，通过 ¹H NMR、MS、元素分析对其结构进行了表征。以铱配合物(npp)₂Ir(acac)作为发光体，制备了结构为ITO/Ir(5%)：PVK(60 nm)/F-TBB(15 nm)/Alq₃(15 nm)/LiF(1 nm)/Al(150 nm)的电致发光器件，研究了其电致发光性质。结果表明器件的最大发射波长在599 nm，最大发光亮度为3 841 cd·m^-2，最大电流效率达3.9 cd·A^-1。     

Synthesis, structure, properties, and application of a carbazole-based diaza[7]helicene in a deep-blue-emitting OLED

A carbazole-based diaza[7]helicene, 2,12-dihexyl-2,12-diaza[7]helicene (1), was synthesized by a photochemical synthesis and its use as a deep-blue dopant emitter in an organic light-emitting diode (OLED) was examined. Compound 1 exhibited good solubility and excellent thermal stability with a high decomposition temperature (T(d)=372.1?°C) and a high glass-transition temperature (T(g), up to 203.0?°C). Single-crystal structural analysis of the crystalline clathrate (1)(2)?cyclohexane along with a theoretical investigation revealed a non-planar-fused structure of compound 1, which prevented the close-packing of molecules in the solid state and kept the molecule in a good amorphous state, which allowed the optimization of the properties of the OLED. A device with a structure of ITO/NPB (50?nm)/CBP:5?% 1 (30?nm)/BCP (20?nm)/Mg:Ag (100?nm)/Ag (50?nm) showed saturated blue light with Commission Internationale de L'Eclairage (CIE) coordinates of (0.15, 0.10); the maximum luminance efficiency and brightness were 0.22?cd?A(-1) (0.09?Lm?W(-1)) and 2365?cd?m(-2), respectively. This new class of helicenes, based on carbazole frameworks, not only opens new possibilities for utilizing helicene derivatives in deep-blue-emitting OLEDs but may also have potential applications in many other fields, such as molecular recognition and organic nonlinear optical materials.     

Synthesis and electroluminescence properties of fluorene containing arylamine oligomer

We synthesized a blue fluorescent fluorene containing arylamine oligomer, bis(9,9,9′,9′‐tetra‐n‐octyl‐2,2′‐difluorenyl‐7‐yl)phenylamine (DFPA), and investigated its electroluminescence (EL) properties. Organic EL devices with a structure of glass/indium‐tin oxide/acid‐doped poly(thiophene) derivative/DFPA/aluminum complex (BAlq)/cesium‐doped macrocyclic compound/Al were fabricated. The device exhibited blue emission, peaking at 432 nm, from the DFPA layer. The maximum luminance of 1800 cd/m² and an external quantum efficiency of 1.5% were observed. Copyright © 2004 John Wiley & Sons, Ltd.     

Isophorone－based Fluorescent Dopant for Red Organic Electrolumi－nescence Device

lsophorone-based red fluorescent compound 3-(dicyanomethy-lene ) -5, 5-dimethyi- 1- [ 2- ( N-ethyl-3-carbazyi ) ethylene ] cyciohe-xene (DCDCC) was synthesized for use in organic Hght-emit-ring diodes (OLEDs). DCDCC was characterized by narrow emission in photoluminescence with full.width at half-maximum of only 50 nm in solution and in thin solid film of 70 nm width. devices with configuration of ITO/NPB/Alq3:DCDCC/Alq3/Mg: Ag were fabricated utilizing DCDCC as dopant emitter. An efficient red emission peaked at 612 nm was obtained for the device with 1% (wt.%) DCDCC in Alq3. The maximum luminance and current efficiency were as high as 3700 cd/m^2 at 14 V and 1.25 cd/A at 150 mA/cm^2, respective-ly.     

High-efficiency solution processable electrophosphorescent iridium complexes bearing polyphenylphenyl dendron ligands

We report the synthesis and electrophosphorescent behavior of a series of novel iridium complex materials (Complexes A–F), which are composed of ligands bearing polyphenylphenyl dendron groups and acetylacetonate. Yellow to saturated red organic light-emitting diodes (OLEDs) based on these newly developed Ir complexes were fabricated through solution process by doping the complex materials into polyvinyl carbazole (PVK)/2-(4-biphenylyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole (PBD) matrices. The emission wavelengths of the materials could be effectively tuned from 549 nm to 640 nm by changing the conjugation of the ligands either through incorporating additional aromatic segment (e.g. phenyl or fluorenyl group) onto the basic dendron ligand or fusing two of the phenyl rings on the polyphenylphenyl dendron group. High performance devices with the configuration of ITO/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonic acid) (PEDOT:PSS) (50 nm)/PVK:PBD (40%):Ir complex (6%) (70 nm)/2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (BCP) (12 nm)/Alq₃ (20 nm)/Mg:Ag (150 nm) have been demonstrated. For example, when Complex B was used as the emissive layer, maximum current efficiency of 34.0 cd/A and external quantum efficiency of 10.3% have been achieved. When 1,3,5-tris(N-phenylbenzimidazol-2-yl) benzene (TPBI) was used as the block layer, the efficiencies can be further improved to 46.3 cd/A and 13.9%, respectively. These solution processed OLED devices demonstrated quite stable EL efficiencies over a large range of current density, which indicated that triplet–triplet annihilation in electrophosphorescence could be effectively suppressed by incorporation of the polyphenylphenyl dendron structure into iridium complexes.     

一种吡嗪铱(Ⅲ)配合物的晶体结构及光物理性质

合成了一种铱配合物二(4,4'-二氟-5-甲基-2,3-二苯基吡嗪) (乙酰丙酮)合铱[(MDPPF)₂Ir(acac)]的有机电致发光器件(OLED),利用X射线单晶衍射仪测定了该化合物的晶体结构. 利用紫外-可见吸收光谱、发射光谱对其光物理性质进行研究. 结果表明: (MDPPF)₂Ir(acac)的单晶结构属于三斜晶系, P1空间群,晶胞参数a=1.13984(3) nm, b=1.26718(3) nm, c=1.29541(3) nm, α=93.7181(19)°, β=101.638(2)°, γ=110.853(3)°, V=1.69336(7) nm³; (MDPPF)₂Ir(acac)在二氯甲烷溶液中的发射峰为555 nm. 以(MDPPF)₂Ir(acac)为客体材料,制备了结构为ITO/NPB(40 nm)/CBP: (MDPPF)₂Ir(acac)(20 nm)/TPBi(10 nm)/Alq₃ (30 nm)/LiF(1 nm)/Al(100 nm)的一系列不同掺杂浓度器件, 器件的发射峰位于558 nm, 最大亮度达到32700 cd·m^-2,最大电流效率44.3 cd·A^-1, 最大功率效率20.7 lm·W^-1.     

Aggregation-enhanced emission and efficient electroluminescence of conjugated polymers containing tetraphenylethene units

Tetraphenylethene (TPE) is a popular luminogen characterized by aggregation-induced emission and has been widely used to construct solid-state emissive materials. In this work, two thermally stable polymers (P1 and P2) consisting of TPE conjugated to the 2,7-positions of fluorene and carbazole, respectively, are synthesized and characterized. Both polymers are weakly fluorescent in solutions but show greatly enhanced emission as the aggregate formation, presenting an aggregation-enhanced emission feature. Two kinds of polymer light-emitting diodes are fabricated utilizing P1 and P2 as emitters (EML) (device I: ITO/PEDOT:PSS (45 nm)/PVK:EML (1:1 wt%, 55 nm)/TPBI (38 nm)/Ca:Ag; device II: ITO/PEDOT:PSS (45 nm)/ PVK:OXD-7:EML (3:1:3 wt%, 55 nm)/TPBI (38 nm)/Ca:Ag). The device II of P2 shows the best performances, affording a maximum luminance of 6500 cd/m 2 and a high peak efficiency of 2.11 cd/A.     

New Electroactive Polymers with Electronically Isolated 4,7-Diarylfluorene Chromophores as Positive Charge Transporting Layer Materials for OLEDs

A group of polyethers containing electroactive pendent 4,7-diarylfluorene chromophores have been prepared by the multi-step synthetic route. Full characterization of their structures has been presented. The polymeric materials represent derivatives of high thermal stability with initial thermal degradation temperatures in a range of 392–397 °C. Glass transition temperatures of the amorphous polymers range from 28 °C to 63 °C and depend on structures of the 4,7-diarylfluorene chromophores. Electron photoemission spectra of thin layers of the electroactive derivatives showed ionization potentials in the range of 5.8–6.0 eV. Hole injecting/transporting properties of the prepared polymeric materials were confirmed during formation of organic light-emitting diodes with tris(quinolin-8-olato)aluminium (Alq₃) as a green emitter, which also serves as an electron transporting layer. The device using hole-transporting polymer with electronically isolated 2,7-di(4-biphenyl)fluorene chromophores demonstrated the best overall performance with low turn on voltage of 3 V, high current efficiency exceeding 1.7 cd/A, and with maximum brightness over 200 cd/m². The organic light-emitting diode (OLED) characteristics were measured in non-optimized test devices. The efficiencies could be further improved by an optimization of device structure, formation conditions, and encapsulation of the devices.     

Polyfluorenes minimally doped with 1,4‐bis(2‐thienyl‐2‐cyanovinyl)benzene chromophore: Their synthesis,characterization, and application to white‐light‐emitting materials

Copolyfluorenes ( PFR1 and PFR2 ), chemically doped with 0.1 and 0.025 mol % 2,5‐dihexyloxy‐1,4‐bis(2‐thienyl‐2‐cyanovinyl)benzene (MR chromophere) were synthesized by the Suzuki coupling reaction. The PFR s were used to fabricate white‐light‐emitting devices through incomplete energy transfer. Because of the low content of the MR chromophore, the optical, thermal, and electrochemical properties of the PFR s were almost identical to those of polyfluorene, except for their photoluminescent (PL) and electroluminescent (EL) properties. The copolymer films showed PL peaks at about 428 and 570 nm originating from fluorene segments and MR chromophores, respectively. Compared with the model compound ( MR ), the polymer chains extended the conjugation length of the MR chromophores and exhibited a 20–48 nm red‐shift in the emission band. In addition, the lower LUMO level of the MR (?3.27 eV) was expected to improve the electron injection. The EL devices [ITO/PEDOT:PSS/ PFR s/Ca (50 nm)/Al (100 nm)] showed a broad emission band, covering the entire visible region, with chromaticity coordinates of (0.36, 0.35) and (0.32, 0.30) for PFR1 and PFR2 devices, respectively. The emission color of the PFR2 device was very similar to that of a pure white light (0.33, 0.33); and the maximal brightness and current efficiency were 3011 cd/m² and 1.98 cd/A, respectively, which surpass those found for polyfluorene devices (1005 cd/m², 0.28 cd/A). A). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3703–3713, 2008     

Synthesis,characterization, and electroluminescence of novel copolyfluorenes and their applications in white light emission

New copolyfluorenes (PC8OF0–PC8OF50) comprised of 9,9‐dioctylfluorene and jacketed units 2,5‐bis[(5‐octyloxy‐phenyl)‐1,3,4‐ oxadiazole]‐1‐(3,5‐dibromophenyl)‐benzene (35C8) were synthesized by palladium‐catalyzed Suzuki coupling reaction. They were characterized by molecular weight determination, ¹H NMR, elemental analysis, DSC, TGA, absorption and emission spectroscopy, and cyclic voltammetry (CV). These copolymers were readily soluble in common organic solvents and exhibited high glass transition temperature and thermal stability.The copolymer films showed absorption peaks from 381 nm to 351 nm, and PL peaks from 432 nm to 421 nm with a blue shift originated from 35C8 units. Both the HOMO energy levels and LUMO levels changed little as the content of 35C8 units increased (?5.59 eV to ?5.48 eV and ?2.60 eV to ?2.49 eV). Electroluminescent devices: ITO/PEDOT:PSS[poly(ethylenedioxythiophene):polystyrenesulfonate]/polymer/Ca (25 nm)/Ag(80 nm) (a), ITO/PEDOT:PSS/polymer/TPBI [1,3,5‐ tris(N‐phenylbenzimidazol‐2‐yl)benzene](15 nm)/Mg:Ag(10:1, wt)/Ag (b), and ITO/ PEDOT:PSS/PVK[Poly(N‐vinylcarbazole)]/polymer/TPBI(15 nm)/Ca(25 nm)/Ag(80 nm) (c) were fabricated to investigate the influence of jacketed contents and device architectures on emission characteristics. The maximum brightness and current efficiency of the PC8OF25 device (5097.8 cd/m² and 0.484 cd/A) surpassed those of the PC8OF0 device (3122.8 cd/m² and 0.416 cd/A). The EL emissions of PC8OF0 – PC8OF50 were pure blue and low‐energy excimer emission bands were successfully suppressed, indicating that these copolymers could be good candidates for blue light‐emitting materials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4555–4565, 2009