Linear Schiff-base fluorescence probe with aggregation-induced emission characteristics for Al detection and its application in live cell imaging

A simple Schiff-base derivative with salicylaldehyde moieties as fluorescent probe 1 was reported by aggregation-induced emission (AIE) characterization for the detection of metal ions. Spectral analysis revealed that probe 1 was highly selective and sensitive to Al³⁺. The probe 1 was also subject to minimal interference from other common competitive metal ions. The detection limit of Al³⁺ was 0.4 μM, which is considerably lower than the World Health Organization standard (7.41 μM), and the acceptable level of Al³⁺ (1.85 μM) in drinking water. The Job's plot and the results of ¹H-NMR and FT-IR analyses indicated that the binding stoichiometry ratio of probe 1 to Al³⁺ was 1:2. Probe 1 demonstrated a fluorescence-enhanced response upon binding with Al³⁺ based on AIE characterization. This response was due to the restricted molecular rotation and increased rigidity of the molecular assembly. Probe 1 exhibited good biocompatibility, and Al³⁺ was detected in live cells. Therefore, probe 1 is a promising fluorescence probe for Al³⁺ detection in the environment.     

A new Fe fluorescent chemosensor based on aggregation-induced emission

A new tetraphenylethylene (TPE)-based sensor M1 bearing double 2-methylpyridyl-2-methylthiophenylamino units linked with triazole moieties was reported. Both UV–vis and fluorescence spectroscopic studies demonstrated that M1 was highly sensitive and selective toward Fe³⁺ over other metal ions in THF/H₂O solution based on the aggregation-induced emission quenching mechanism. The lowest detection limit of M1 for Fe³⁺ is 0.7 μM. The detailed fluorescent titration study suggested that the binding stoichiometry of the M1–Fe³⁺ complex was 1:2, and the structure between M1 and the Fe³⁺ complex was confirmed by the ¹H NMR titration.     

A ratiometric fluorescent probe for iron(III) and its application for detection of iron(III) in human blood serum

A simple and versatile ratiometric fluorescent Fe³⁺ detecting system, probe 1, was rationally developed based on the Fe³⁺-mediated deprotection of acetal reaction. Notably, this reaction was firstly employed to design fluorescent Fe³⁺ probe. Upon treatment with Fe³⁺, probe 1 showed ratiometric response, with the fluorescence spectra displaying significant red shift (up to 132 nm) and the emission ratio value (I₅₂₂/I₃₉₀) exhibiting approximately 2362-fold enhancement. In addition, the probe is highly sensitive (with the detection limit of 0.12 μM) and highly selective to Fe³⁺ over other biologically relevant metal ions. The sensing reaction product of the probe with Fe³⁺ was confirmed by NMR spectra and mass spectrometry. TD-DFT calculation has demonstrated that the ratiometric response of probe 1 to Fe³⁺ is due to the regulation of intramolecular charge transfer (ICT) efficiency. Moreover, the practical utility in fluorescence detection of Fe³⁺ in human blood serum was also conducted, and probe 1 represents the first ratiometric fluorescent probe that can be used to monitor Fe³⁺ level in human blood serum. Finally, probe 1 was further employed in living cell imaging with pancreatic cancer cells, in which it displayed low cytotoxicity, satisfactory cell permeability, and selective ratiometric response to Fe³⁺.     

An AIE and ESIPT active Schiff base as colorimetric probe of Fe3+ and turn-on fluorescent probe of Al3+: Experimental and theoretical studies

In this present study, a simple cation chemoprobe 1 bearing naphthol OH and imine group was designed and synthesized, which was identified as an aggregation induced emission (AIE) active molecule with excited state intramolecular proton transfer (ESIPT) features. In addition, 1 showed both colorimetric detection for Fe³⁺ and turn-on fluorescence response for Al³⁺. The binding ratio of 1 to Fe³⁺ and Al³⁺ were determined both to be 1:1 via Job’s plot and ESI-mass spectrometry analysis. The limit of detection (LOD) of probe 1 to Fe³⁺ and Al³⁺ were 0.10 and 0.43 μM, respectively. Moreover, probe 1 could be used to quantify Fe³⁺ and Al³⁺ in environmental water samples.     

Rhodamine based derivative and its zinc complex: synthesis and recognition behavior toward Hg(II)

A simple fluorescent probe, which contains rhodamine and aminoquinoline moieties, was designed and prepared for selective detection of Hg²⁺ in acetonitrile. RbQ exhibited high selectivity and sensitivity toward Hg²⁺ over other common metal ions. The recognition of RbQ toward Hg²⁺ can be detected by fluorescence spectra, absorption spectra, and even by naked eyes. The binding ratio of the RbQ–Hg²⁺ complex was found to be 1:1 according to Job plot experiment, and the limit of detection was 1.05×10⁻⁷ M. Moreover, the prepared complex RbQ–Zn²⁺ (RbQZ) could detect Hg²⁺ in a ratiometric way and showed lower limit of detection (2.95×10⁻⁸ M) than RbQ in the same condition. Finally, we also demonstrated that the aminoquinoline–zinc complex could be served as a new and effective FRET donor for rhodamine derivatives.     

2-Aminopyridine derivative as fluorescence ‘On–Off’ molecular switch for selective detection of Fe3+/Hg2+

2-Amino-6-methyl-4-phenyl-nicotinonitrile 1, a 2-aminopyridine-based fluorescent compound, was found to be a fluorescent chemosensor for the detection of Fe³⁺ and Hg²⁺ ions over a number of other metal ions. Compound 1 was synthesized in one step using a multicomponent reaction, and characterized using common spectroscopic tools. During Fe³⁺/Hg²⁺ sensing the compound 1 followed a ‘switch-off’ mechanism. Further, compound 1 could sense Fe³⁺ over Hg²⁺ by its distinct absorption and fluorescence quenching behaviors. 1:1 complex formation of 1 with Fe³⁺ and Hg²⁺ was clearly understood from Job’s plot. The present work brings additional evidence on the importance of multicomponent reactions which could lead to the development of fluorescence chemosensor in one step for the selective detection of biologically important metal ions.     

A highly sensitive and selective fluorescent probe for Fe3+ containing two rhodamine B and thiocarbonyl moieties and its application to live cell imaging

A novel turn-on rhodamine B-based fluorescent chemosensor (RBCS) was designed and synthesized by reacting N-(rhodamine B)lactam-1,2-ethylenediamine and carbon disulfide. Upon addition of Fe³⁺ in EtOH/H₂O solution (2:1, v/v, HEPES buffer, 0.6?mM, pH 7.20), the RBCS displayed a significant fluorescence enhancement at 582?nm and a dramatic color change from colorless to pink, which can be detected by the naked eye. Significantly, the RBCS exhibited a highly selective and sensitive ability toward Fe³⁺. The detection limit of the probe was 2.05?×?10^?7?M. Job's plot indicated the formation of 1:1 complex between the RBCS and Fe³⁺. Moreover, the practical use of the RBCS is demonstrated by its application in the detection of Fe³⁺ in HeLa cells.     

Ratiometric fluorescent Zn chemosensor constructed by appending a pair of carboxamidoquinoline on 1,2-diaminocyclohexane scaffold

By appending a pair of carboxamidoquinoline pendants onto 1,2-diaminocyclohexane scaffold via N-alkylation, multifunctionalized ACAQ was designed and synthesized as a water soluble fluorescent ratiometric chemosensor for Zn²⁺. In 50% aqueous methanol buffer pH 7.4 solution, upon excitation at 316 nm, ACAQ (5 μM) displayed a selective ratiometric fluorescence changes with a shift from 410 to 490 nm in response to the interaction with Zn²⁺. After binding with 1 equiv of Zn²⁺, ACAQ exhibited a 12-fold enhancement in I₄₉₀/I₄₁₀ characterized by a clear isoemissive point at 440 nm. The metal sensor binding mode was established by Job’s plot and the combined fluorescence and ¹H NMR spectroscopic method. The selectivity of the probe toward biological relevant cations and transition metal ions was proven to be good. In addition, the interference caused by Cu²⁺ and Cd²⁺ in the quantitation of Zn²⁺ can be completely eliminated by the use of diethyldithiocarbamate as the screening agent. Exploitation of ACAQ as the sensing probe, ratiometric determination of Zn²⁺ with the limit of detection (LOD) at 28.3 nm can be realized. In addition, the unique responsive properties of the probe toward Fe³⁺ and Zn²⁺ were used to construct a fluorescent switch. The membrane permeability of ACAQ to living cells and bio-imaging of Zn²⁺ were demonstrated.     

A Schiff base fluorescence probe for highly selective turn-on recognition of Zn2+

A simple Schiff base CTS, synthesized between 2-hydroxy-1-naphthaldehyde and 2-benzylthio-ethanamine, was found to be a good turn-on fluorescence probe for the detection of Zn²⁺, due to the restriction of the rotation of the bond between CN and naphthalene ring and/or the blocking of the photo-induced electron transfer (PET) mechanism of the nitrogen atom to naphthalene ring. Excellent selectivity for Zn²⁺ was evidenced, over many other competing ions, including Fe³⁺, Cr³⁺, Ni²⁺, Co²⁺, Fe²⁺,Mn²⁺, Ca²⁺, Hg²⁺, Pb²⁺, Cu²⁺, Mg²⁺, Ba²⁺, Cd²⁺, Ag⁺, Li⁺, K⁺, and Na⁺, in EtOH/HEPES buffer (95:5, v/v, pH = 7.4). It was noteworthy that Cd²⁺ had no interference with Zn²⁺. The stoichiometric complex of CTS-Zn²⁺ was determined to be 2:1 for CTS and Zn²⁺ in molar, based on the Job plot and single crystal X-ray diffraction data. The binding constant of the complex was 85.7 M^?2 with a detection limit of 5.03 × 10^?7 M. The fluorescence bio-imaging capability of CTS to detect Zn²⁺ in live cells was also studied. These results indicated that CTS could serve as a favorable probe for Zn²⁺.     

Magnetic and optical investigation of 40SiO2·30Na2O·1Al2O3·(29 − x)B2O3·xFe2O3 glass matrix

Samples of 40SiO₂·30Na₂O·1Al₂O₃·(29 − x)B₂O₃·xFe₂O₃ (mol%), with 0.0 ≤ x ≤ 17.5, were prepared by the fusion method and investigated by electron paramagnetic resonance (EPR), optical absorption (OA) and Mössbauer spectroscopy (MS). The EPR spectra of the as-synthesized samples exhibit two well-defined EPR signals around g = 4.27 and g = 2.01 and a visible EPR shoulder around g = 6.4, assigned to isolated Fe³⁺ ion complexes (g = 4.27 and g = 6.4) and Fe³⁺-based clusters (g = 2.01). Analyses of both EPR line intensity and line width support the model picture of Fe³⁺-based clusters built in from two sources of isolated ions, namely Fe²⁺ and Fe³⁺; the ferrous ion being used to build in iron-based clusters at lower x-content (below about x = 2.5%) whereas the ferric ion is used to build in iron-based clusters at higher x-content (above about x = 2.5%). The presence of Fe²⁺ ions incorporated within the glass template is supported by OA data with a strong band around 1100 nm due to the spin-allowed ⁵E_g–⁵T_2g transition in an octahedral coordination with oxygen. Additionally, Mössbauer data (isomer shift and quadrupole splitting) confirm incorporation of both Fe²⁺ and Fe³⁺ ions within the template, more likely in tetrahedral-like environments. We hypothesize that ferrous ions are incorporated within the glass template as FeO₄ complex resulting from replacing silicon in non-bridging oxygen (SiO₃O⁻) sites whereas ferric ions are incorporated as FeO₄ complex resulting from replacing silicon in bridging-like oxygen silicate groups (SiO₄).     

Synthesis and Pd(II) binding studies of octasubstituted alkyl thio derivatised phthalocyanines

Synthesis and characterization of non-peripherally (4,5) and peripherally (6,7) substituted metal free and Pd octapentylthiophthalocyanine and coordination of palladium ions to these Pcs are reported. The unmetalated complexes (4 and 6) show Pd coordination at the central metal and at the ring. The number of Pd ions bound to complex 4 were found to be five and to complex 6 were three. The equilibrium constant for the binding of Pd to complexes 4 was lower (K = 1.2 × 10⁹ dm³ mol⁻¹) than for complex 6 (K = 5.7 × 10¹⁰ dm³ mol⁻¹).     

Synthesis of a new pyrene-devived fluorescent probe for the detection of Zn2+

A novel pyrene-based receptor bearing benzothiazole was synthesized as a good turn-on fluorescent sensor for the recognition of Zn²⁺. The probe showed an excellent selectivity for Zn²⁺over most other competing ions (eg, Cr³⁺, Li⁺, Cd²⁺, Al³⁺, Pb²⁺, Li⁺, Mg²⁺, Ag⁺, Ca²⁺, Ni²⁺, Mn²⁺, Fe³⁺, Hg²⁺, Ba²⁺, K⁺, Na⁺, Cu²⁺, Fe²⁺) in EtOH-HEPES (65:35, v/v, pH?=?7.20), which might be attributed to the photoinduced electron transfer (PET) mechanism. The formation of 1:1 stoichiometric PBZ-Zn²⁺ complex was determined based on the Job's plot, ¹H NMR titration and ESI-MS. The binding constant of the complex was 4.04?×?10⁴?M^?1 with a detection limit of 2.58?×?10^?7?M. The potential application of the PBZ in real water samples for recognizing Zn²⁺ was investigated. Bio-imaging study also revealed that PBZ could be applied to detecting Zn²⁺ in live cells. These results indicated that PBZ could be a favorable probe for Zn²⁺.     

A novel naphthalimide–glutathione chemosensor for fluorescent detection of Fe3+ and Hg2+ in aqueous medium and its application

By rationally introducing glutathione functionalized 1, 8–naphthalimide, a novel fluorescent chemosensor (NG) was successfully synthesized. NG can high selectively and sensitively recognize Fe³⁺/Hg²⁺ ions through quenching of fluorescence among all kinds of common metal ions in aqueous medium. The binding stoichiometry ratio of NG–Fe³⁺ is verified as 2:1and NG–Hg²⁺ as 1:2 confirmed by Job's plot method, FT-IR, ¹H NMR and ESI–MS spectrum, and the possible sensing mechanism were also proposed. The chemosensor NG toward Fe³⁺ and Hg²⁺ displays the excellent advantages of high selectivity and sensitivity, low detection limits (7.92?×?10^?8 and 4.22?×?10^?8?M), high association constants (3.37?×?10⁸ and 8.14?×?10⁴?M^?2), instataneous response (about 10s) and wide pH response range (3.0–8.0). Importantly, the chemosensor NG was successfully applied to determine Hg²⁺ in tap water. Meanwhile, the test strips based on NG were prepared, which could conveniently and efficiently detect Fe³⁺ and Hg²⁺. Moreover, the complex of NG and Fe³⁺ (NG–Fe³⁺) showed high selectivity and sensitivity for H₂PO₄￣ over many other anions in the same medium.     

A highly selective turn-on fluorescent chemosensor for copper(II) ion

A new pyrene derivative (1) containing a diaminomaleonitrile moiety exhibits high selectivity for Cu²⁺ detection. Significant fluorescence enhancement was observed with chemosensor 1 in the presence of Cu²⁺. However, the metal ions Ag⁺, Ca²⁺, Cd²⁺, Co²⁺, Fe²⁺, Fe³⁺, Hg²⁺, Mg²⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺ produced only minor changes in fluorescence values for the system. The apparent association constant (K_a) of Cu²⁺ binding in chemosensor 1 was found to be 5.55×10³ M⁻¹. The maximum fluorescence enhancement caused by Cu²⁺ binding in chemosensor 1 was observed over the pH range 5-7.5.     

Fluorescence “turn-on” chemosensor for the selective detection of zinc ion based on Schiff-base derivative

N,N′-phenylenebis(salicylideaminato) (L) has been used to detect trace amounts of zinc ion in acetonitrile–water solution by fluorescence spectroscopy. The fluorescent probe undergoes fluorescent emission intensity enhancement upon binding to zinc ions in MeCN/H₂O (1:1, v/v) solution. The fluorescence enhancement of L is attributed to the 1:1 complex formation between L and Zn(II), which has been utilized as the basis for selective detection of Zn(II). The linear response range for Zn(II) covers a concentration range of 1.6 × 10^?7 to 1.0 × 10^?5 mol/L, and the detection limit is 1.5 × 10^?7 mol/L. The fluorescent probe exhibits high selectivity over other common metal ions, and the proposed fluorescent sensor was applied to determine zinc in water samples and waste water.     

A pyrene-based dual chemosensor for colorimetric detection of Cu2+ and fluorescent detection of Fe3+

A pyrene based chemosensor was designed and synthesized. The pyrene fluorophore was connected with a pyridine unit through a Schiff base structure to give the sensor (L). L was tested with a variety of metal ions and exhibited high colorimetric selectivities for Cu²⁺ and Fe³⁺ over other ions. Upon binding with Cu²⁺ or Fe³⁺, L showed an obvious optical color change from colorless to pink for Cu²⁺ or orange for Fe³⁺ over a wide pH range from 3 to 12. Moreover, the fluorescence of L at 370 nm decreased sharply after bonding with Fe³⁺, while other metal ions including Cu²⁺ had no apparent interference. Thus, using such single chemosensor, Cu²⁺ and Fe³⁺ can be detected independently with high selectivity and sensitivity. The limits of detection toward Cu²⁺ and Fe³⁺ were 8.5 and 2.0 μM, respectively. DFT calculation results also proved the formation of stable coordination complexes and the phenomenon of fluorescence quenching by Fe³⁺. Furthermore, L was also successfully used as a bioimaging reagent for detection of Fe³⁺ in living cells.     

A highly sensitive and selective fluorescent probe for trivalent aluminum ion based on rhodamine derivative in living cells

A rhodamine spirolactam derivative (1) is developed as a colormetric and fluorescent probe for trivalent aluminum ions (Al³⁺). It exhibits a highly sensitive “turn-on” fluorescent response toward Al³⁺ with a 70-fold fluorescence intensity enhancement under 2 equiv. of Al³⁺ added. The probe can be applied to the quantification of Al³⁺ with a linear range covering from 5.0 × 10⁻⁷ to 2.0 × 10⁻⁵ M and a detection limit of 4.0 × 10⁻⁸ M. Most importantly, the fluorescence changes of the probe are remarkably specific for Al³⁺ in the presence of other metal ions, which meet the selective requirements for practical application. Moreover, the experiment results show that the response behavior of 1 towards Al³⁺ is pH independent in neutral condition (pH 6.0–8.0) and the response of the probe is fast (response time less than 3 min). In addition, the proposed probe has been used to detect Al³⁺ in water samples and image Al³⁺ in living cells with satisfying results.     

Synthesis,characterization and applications of schiff base chemosensor for determination of Cu2+ ions

A novel thiazole-based Schiffbase chemosensor SB1 with N- and O- donor atoms was synthesized and characterized by different techniques (UV–vis, ¹³C NMR, ¹H NMR, and FT-IR analysis). The chemosensor SB1 was used for the determination of Cu²⁺ ions in various samples. The significant spectral changes in absorption spectra of chemosensor SB1 at 220 and 416 nm and the color change from light yellow to yellowish-brown indicate high selectivity and sensitivity towards Cu²⁺ ions as compared to other cations (Na⁺, K⁺, Ag⁺, Zn²⁺, Ni²⁺, Pb²⁺, Mn²⁺, Mg²⁺, Co²⁺, Cd²⁺, Sn²⁺, Hg²⁺, Cr³⁺, Fe^3+, and Al³⁺). The sensing mechanism of SB1 was investigated through various techniques such as FT-IR, UV–vis and ¹H NMR titration experiment and further confirmed by DFT computational studies. The 2:1 binding mode between SB1 and Cu²⁺ ions was confirmed by Job‘s plot using UV–vis spectrophotometry. The limit of detection (LOD) and limit of quantification (LOQ) were found to be 0.015 and 0.0471 µg mL^?1, respectively. The percent recovery of Cu²⁺ from various environmental samples was found to be 95.00–103.33% at various levels. These obtained results demonstrate that chemosensor SB1 is a cost-effective, facile, selective, sensitive, and colorimetric sensing platform to detect trace amounts of Cu²⁺ ions in variousenvironmental and agricultural samples.     

Anthroneamine based chromofluorogenic probes for Hg2+ detection in aqueous solution

Anthroneamine derivatives 1–3 (H₂O:DMSO; 9:1, HEPES buffer, pH 7.0 ± 0.1) undergo highly selective fluorescence quenching with Hg²⁺. The observed linear fluorescence intensity change allows the quantitative detection of Hg²⁺ between 200 nM/40 ppb—12 μM/2.4 ppm even in the presence of interfering metal ions viz. Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺, Cr³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Ag⁺, Cd²⁺, Pb²⁺. Probes 1–3 and their Hg²⁺ complexes also show the broad pH resistance for their practical applicability.     

A new turn-on fluorescence probe for Zn in aqueous solution and imaging application in living cells

We designed and synthesized a new pyrazoline-based turn-on fluorescence probe for Zn²⁺ by the reaction of chalcone and thiosemicarbazide. The structure of the probe was characterized by IR, NMR and HRMS spectroscopy. The probe (L) exhibits high selectivity and sensitivity for detecting Zn²⁺ in buffered EtOH/HEPES solution (EtOH/HEPES = 1/1, pH 7.2) with 80-fold fluorescence enhancement, which is superior to previous reports. Job’s plot analysis revealed 1:1 stoichiometry between probe L and Zn²⁺ ions. The association constant estimated by the Benesi–Hildebrand method and the detection limit were 3.92 × 10³ M⁻¹ and 5.2 × 10⁻⁷ M, respectively. A proposed binding mode was confirmed by ¹H NMR titration experiments and density functional theory (DFT) calculations. The probe is cell-permeable and stable at the physiological pH range in biological systems. Because of its fast response to Zn²⁺, the probe can monitor Zn²⁺ in living cells. Moreover, the selective binding of L and Zn²⁺ was reversible with the addition of EDTA in buffered EtOH/HEPES solution and Zn²⁺ could be imaged in SH-SY5Y neuron cells.